you'll be SHOCKED by how little I got done this week

[@2015_Rubicnn]

Why say sorry for not putting out more drag truck videos? If anyone is making comments about that, I highly doubt they have deep pockets and endless time. You are doing a lot to run a repair shop, being a family man and making/editing KZbin videos.

[@SharpShooterCO]

Don't sweat the small stuff LT.. we appreciate you for who you are and for what you are accomplishing. Keep us updated as much as you can, and keep knocking it out of the park!!😂

[@mattr6334]

Hey LT, how about another AT4 update video? It’s been a couple years since your last one, curious to know how it’s holding up.

[@savethebeaters]

Best real world fab videos on KZbin!

[@Chuk-m1u]

Hey LT, I admire your attention to detail and your patient meticulous methodology towards your projects, AND on top of that you are running a business that requires that it be profitable. You've got a full plate! So I am not disappointed in the time it's taking to get your projects done. Plus you've got a wife and kids to take care of too. You Are Blessed, LT, you are doing the best you can, and the work you're getting done on your truck is Top Notch!

[@SocialAnomaly88]

Have you considered making the exhaust out of titanium or inconel? Would be nuts hearing a turbo big block thru an inconel system 🫠

[@Chevtec]

FYI on two things, it's "Queens Gambit", and your slotted brake rotors are on backwards. They should be swapped side to side to be correct. Not trying to be a know it all, because I certainly don't. I just happen to have just watched that movie a couple of weeks ago, and last week I found that my rotors on my truck are on backwards as well. Difference is, you have the energy to get right on them, whereas it will take me months to get around to fix mine. Great videos, always amazing to see how much you get accomplished while still running a business

[@davevangemert9853]

LT, your living the dream.No complaints here. Bread n butter #1, toys2nd!

[@coreyrowe2052]

I'm anxious to see how well this build comes along but I'm also curious to see the S10 progress as well! You're doing a great job LT!

[@rlarson315]

"Mustang probably." Lmfao! We think alike there bud. 👍

[@bryanomicioli3301]

Mustang is gone

[@anthonypritchard7710]

My turbo Silverado SS had exhaust all the way to tail and it’s so worth the work to get it back there.

[@bluecollarhotrods9781]

I can truly appreciate the time you took to round the corners of those shock mounts after you trimmed the bottoms off. And tig welding the washers too. Seemingly minor things, but nice touches IMO. I like to take the time to remove sharp edges on all of my stuff. It makes it nicer, and arguably less hazardous to work on/service.

[@henrybrundage7186]

You do you not us keep the videos coming on your time!

[@DaInfamous0ne]

I'm still gonna watch.

[@juniormorrison2422]

😂😂😂 LT had a ” squirrel” moment when that car drove past 😂😂😂😂

[@mchristr]

I've gotten so little done on my project because I'm sitting here watching you work. Agree with the sleeper exhaust out the back.

[@spike1n1]

mufflex performance fbody over the axle does this similar to your thoughts

[@autumnjeserich2689]

Thank you for making the 8.1 intake modification video. I just finished doing that mod on mine today.

[@givingmyalltolife686]

Take your time and do it right.😎

[@LSandL31]

Just keep it real brother. Little bit by little bit.

[@teaguegearhart9851]

Great video. This is as real as a project gets.

[@edcadlick2650]

Don't forget new gloves😳👍

[@VATION3RD-GEN-X-GARAGE]

LT I see you're wearing a OG Army Green Cleetus McFarland shirt I purchased two trying to win that obs two-door Tahoe giveaway about a year ago they're great shirts...

[@Scandalous3pedals]

I'm the same as you with my project truck. Attention to detail adds up in the end. Also really enjoyed the queens gambit. Excellent work as always 🤘😎

[@aubreyroche5080]

I always giggle to myself when people say, " the welding should sound like Bacon Frying", and it sounds like Bacon being electrocuted to me... LOL...

[@t.l.robinson2162]

Thank you for another great video.

[@reaperasylum]

I think the full exhaust with bed mounted exhaust tips in front of the rear wheels would probably be easier, have a ton more room and probably look stunning with a flush mount tip.

[@davestewart9146]

I think you’re doing an awesome job LT, great video 👍😁

[@snapon666]

But but but the TV guys get er done over a weekend ?

[@bobqzzi]

Enjoyable as always. Watching this on June 2. Summer will be over before you know it. Maybe forget about the S10 and just finish the drag truck. Going to be real disappointing if we get one of those "It's October and this is the last day of the track being open and here I am making my first run with the drag truck," videos.

[@zebshort2778]

Looks awesome man keep doing you and don't worry about the haters that don't matter 👍

[@scotthultin7769]

317 👍's up LT thank you for sharing 🤗

[@mattreeves696]

When you grabbed that hot shock mount I think I felt it through the phone 📱 😂

[@qdmax11]

Offset Rims you could run a Wide Tire

[@SamOHalloran]

I did the EXACT same thing a couple days ago... time for some new gloves.

[@carykennedy9467]

Do what you gotta do

[@blownaway4371]

What are the rear torsion bars "rated" at? When I first saw them I thought about using a 84-87 civics' front 17mm torsion bar "cut down" and welded to rear frame so they would do the same basic thing. And not have to run a sway bar. (Have lots of old cars and parts!)

[@sesampley]

No cal-tracs on that Silverado?

[@LawrenceTolman]

It will definitely have Cal-Tracs, I just haven’t bought them yet

[@GhostieR6]

Could you run a ford 9” rear end with 3.7 ratio with the 3.73 in the front?

[@pedroequis9396]

Is there some type of advantage to hanging all the suspension off of the rear of the axle ?

[@mattreeves696]

I've been a long time follower of the channel, love the content I was super excited when u said u were moving here to the springs. If you need a shop porter or a mechanic hit me back ive been working on cars since I was 13 and now I'm 40 I owned 2 different shops In Missouri when I lived there I would love an opportunity to work with you thanks mathieu R

[@atheplummer]

LT, curious what transfer case you plan on using on this truck. I've got a 2017 Denali & it has complete selectability from 2H, Auto, 4H, & 4L. Wondering if that case would be strong enough to throw as much HP at it as you are making with your package?

[@midwestdave33]

That ARB looks so small compared to others I've seen on other lighter drag cars.

[@transmissionman9377]

Can't waight for the S-10 build

[@maddscientist1644]

How long have you had those Matco impacts? I remember you using them when I would watch you on TV way back in the day. They must be really well built.

[@AnnoyedCoastalBeach-nl4tm]

Shop content would be great if it's a cool vehicle or something a little out of the ordinary

[@thatrandomgamer9854]

Hey Lawrence LT Tolmen your videos with the ugly truck made me find a 8.1 bone stock 2500hd 2002 crew cab too black paint job I just want it tuned on a dyno how do I get a hold of Matt Stanford ? because he’s helped you and Cletus

[@SannithTv]

so you want another sleeper after you said this truck was gonna be a pure drag truck. makes sense

[@aslacker]

LT, I have a 100% street 2003 Silverado RCSB lowered 2/4 . I have been wanting to relocate the shock mounts vertically and am really wanting to know if you think those Viking shocks will work well and last on the street.

[@LawrenceTolman]

The Crusader line from Viking is more “race only” but I do use their Warrior line on UglyTruck on the street regularly and have zero complaints

[@arturogalindo6134]

How much would you sell a passenger side motor mount cradle for the 8.1 swap?

[@prettyred409]

Question…what will stop the rear axel from twisting from torque?

[@LawrenceTolman]

It will have CalTrac bars to stop the axle twist and plant the rear tires

[@prettyred409]

@@LawrenceTolman 🤘🏻🤘🏻

[@TandD1w]

Could you please post a link to that shock mount?

[@LawrenceTolman]

parts links are now posted in the description

[@mcmillanbs43]

I'm sorry for laughing but it was kinda funny 😂

[@donniehamlett2157]

I still think the motor that was with the parts truck should see it's way into S10 and the S10 engine should see it's way into the tracker if you still have it and make the tracker a give away truck

[@donniehamlett2157]

Or raffle truck

[@JimFlanagan4206]

I don't wanna sound like I'm bragging, but you should see how little I've gotten done this week😅

[@ChevyARt15]

Being that you have the capability and are able to change your exhaust to suit your needs. Will you try the megaphone exhaust? When I watched this I thought about you. www.youtube.com/@FluidMotorUnion This will make YOUR exhaust sound AMAZING. Custom exhaust builders share fabrication secret!

[@rgreerjr]

man that lower shock mount looks like its made out of pure chineseium

[@mrphiscal]

It is better content if it done right and not RIGHT Away! Lt build it at your own pace .

[@DrewBe59635]

That dropped part must have been awful heavy. Not hot at all.

[@brucemartin8519]

Use oval pipe.

[@bryanomicioli3301]

Stay relevant with shorts on the anomalies that come up in the shop.

[@Steve-ps2tw]

You sure built these a lot faster on TV lol

[@davevangemert9853]

it aint about you. I want 4inch out thetop of the hood and I want an 8ft flamethrower. why do you have to complicate things?

[@lakesidesciencelab4196]

L.t.?! What kind of drugs did you take to visualize the exhaust??? Share? Just kidding, truck is looking rad, dude!

[@jonallen1985]

I hate how the thumbs up button is right next to the thumbs down button, I have hit the thumbs down button by accident so many times😭

[@stevenmcinnis8105]

Just hit it again, then thumbs-up

[@lunkydog]

I enjoy your channel, but you are working at cross purposes with all the commitment to retain all the creature comforts and OEM stuff. Not hating, and I always liked you from the TV days, but just being real. Hopefully you'll understand this as not a criticism.

[@LawrenceTolman]

You are 100% correct, and I fully acknowledge that I should lose as much weight as possible to make the truck faster, but I’m determined to make it as fast as possible while keeping some of those creature comforts. It doesn’t make sense for sure, but that’s what I thrive on.

[@rgreerjr]

a purpose built drag truck, full exhaust, "sleeper" 🙄

[@larrywhite6637]

IS THAT BURN PAYBACK FOR GRINDING WITHOUT EYE PROTECTION??????? CARMA IS A B! OR DO WE NEED TO CALL OSHA?