You're a Little Late to the PARTY!!

Рет қаралды 32,751

Fast Ag Montana

Күн бұрын

Пікірлер: 58

@CherokeeJackson 6 ай бұрын

The T’s got skills! IMPRESSIVE! Thanks for another awesome video!

@kennyb3659 9 ай бұрын

It was nice to meet you and your family at the farm show hope to run into you closer to home

@shignig383 9 ай бұрын

Just a heads up we put in extra support from the bumper mount and bolt it on right in front of spring hanger because it's not a if but when the from frame horns break off and it adds support for if you gotta get pulled out

@pab40sc 9 ай бұрын

I love when you guys do projects that involve fabrication work. God bless and be safe.

@rongrace479 9 ай бұрын

Tony I have worked with stainless for 30 years and the best way to drill it is start the hole with a small drill and then go to a bigger bit

@FastAgMontana 9 ай бұрын

That’s what I was doing. Still went though a few bits.

@samueljoejr5191 9 ай бұрын

Say what you want to, the freight haulers will envy that one. That Pete is sharp!!

@daviddziegielewski653 9 ай бұрын

There's a product called WAB GRAY MATTER that will shine that bumper up like chrome. That Pete looks so good!

@thomasleonard1846 9 ай бұрын

More FastAg!

@davidkimmel4216 9 ай бұрын

Thank you for sharing this with us.

@brucebiehn2123 9 ай бұрын

Here’s a hint on the four mount your dial at 90 degrees, work with two jaws at a time and 180 degrees apart loosen the low and tighten the high. I machined for 20 years and all I ever used was a four jaw. I set up heavy pieces for electric motors, rotors that weighed up to 8000 lbs and endbells that weighed up to a 1000 lbs. I could get these pieces set up to

@just-incase3483 9 ай бұрын

I feel my life is complete now that I know where all your light switches are in your shop.

@ahohlen1 9 ай бұрын

😂. Your comment wins the internet today! The shop addition is easy-peasy. The original shop…I feel Tim’s pain, maybe even moreso as I’m not out there daily and sometimes have to do a thorough search to find all the switches.

@creatorwords4113 9 ай бұрын

The Tony and Tim Show...viewing enjoyment!

@michaeltablet8577 9 ай бұрын

Great teamwork! Yall stay safe and be blessed!

@CharlesHohn 9 ай бұрын

Slow bit speed and pulse the trigger. Crisco is a good drilling fluid, dip the bit and it will feed down as the crisco melts. Cool the bit in water or oil from time to time. Speed is not your friend in stainless.

@alecfromminnenowhere2089 9 ай бұрын

I like the fill in music with the harmonica. Can you tell from the Bob Dylan era?

@rickbrandt9559 9 ай бұрын

Call the pully Excellent Aussie outback fab skills, or farm America

@TheJimmybud 9 ай бұрын

I have been trucking for 35 plus years and it's amazing how a company like FedEx can still turn a huge profit being ran as poorly as it is.

@edwardtabor77 9 ай бұрын

I worked in a shop like that 17 switches and none made sense. Finally just started using circuit breakers.

@kathleenkasper6461 9 ай бұрын

Great idea. There are probably fewer of those in the shop.

@michaelpearson1367 9 ай бұрын

Love your content. Have a farm west of Brookston, Indiana that Tim probably knows!

@garymemetoo2238 9 ай бұрын

Yes. Four-jaw chucks can drive you nuts. It takes a dial indicator, brass hammer, some other stuff, and, most importantly - luck - to get a part centered quickly. And if you aren't lucky, it can be a struggle, especially if tolerances less than a few thousandths need to be held.

@randallharmsen5802 9 ай бұрын

4 jaw chucks can be a challenge. When indicating in will move one jaw in that’s farther from zero halfway. It’s a tweaking in deal.

@Hunglikemoose 9 ай бұрын

Install some occupancy sensors for your lights and you will be golden.

@tman_6251 9 ай бұрын

I had the opposite issue. Had one for a 379 tried putting it on my 389 wouldn't work called HERD and got the correct bracket... I think it was around $800, but that was several years ago.

@billpotmesil 9 ай бұрын

Bumper? In Wyoming we called them Antelope Splash Guards!

@billpotmesil 9 ай бұрын

Also, Deer Catchers or Elk Arrestors.

@timwasserman1063 9 ай бұрын

I still like your old oil can👍

@markhelming58 9 ай бұрын

I have the same bumper on my 379. The mounting plate is different though

@stoneshrink 9 ай бұрын

Stainless drilling. Slow like 2 rps and lots of pressure. :)

@edwhite6250 9 ай бұрын

👍

@huskerboy3471 9 ай бұрын

❤

@jaypipken7444 9 ай бұрын

Are you guys having fun at the farm show in Louisville. And how was the ark exhibit. Were wanting to go .

@MartinP1214 9 ай бұрын

Great fabrication.

@jimholty2274 9 ай бұрын

Looking sweet

@brandonboehmer1724 9 ай бұрын

Just another sick Rocky Mountain spread man. I was going to say I thought you guys where 120-128 not 105 like what I have in WA

@FastAgMontana 9 ай бұрын

I will haul 120-125 and be with in the 10% off the farm.

@JohnDavis-y4k 9 ай бұрын

I know how that feels foolishly. Did that exact thing and boy does it hurt,

@TheJimmybud 9 ай бұрын

Just imagine if FedEx wasn't the worst delivery company on the planet, they would be UPS! 😂😂😂

@richardradawetz8788 9 ай бұрын

I would have got a nother red fender and split it in two instead

@broersmasteve8033 9 ай бұрын

It is a sharp Pete, but why did you choose that over a kw?

@randallharmsen5802 9 ай бұрын

Hey Tony still having trouble with the ground squirrels 🐿️? I can help you with them if you need some assistance.

@neilwehling2154 9 ай бұрын

Tony, at 13.45 where was your helmet?

@37903eral 9 ай бұрын

Nobody will notice after about 2 trips up and down your gravel roads. Or at 65 miles an hour.

@gregcatlett1458 9 ай бұрын

That my friend is one BEAUTIFUL DUMB TRUCK GUYS!!!!! Better late than never thanks to everyone!

@JHruby 9 ай бұрын

Tony, be careful. If you get all the fixing done on all the trucks, then you'll have nothing to do and you'll be in a real bind then. Of course, you'd be the first truck owner since the Ancient Phonecians to get all the fixing done, but. . .