Chevy Suburban ABS, STABILITRAK, Traction Control Issue! Tahoe, Yukon Wheel Speed Sensor Replacement

[@Ishkatan]

I love that you show the mechanic's book and read from it. It tells kids who may be interested in cars and that they need to know how to read!

[@TerenceDIY]

Thank you and thanks for watching.

[@1bones26]

thank you!!!im not more than a youtube mechanic and your vid is perfect and educating. It helped 100%

[@TerenceDIY]

That's great! I am glad my video helped you. Thank you very much for watching.

[@vectorxpress9038]

Great instructions. Your Video is clear and tips are appreciated.

[@TerenceDIY]

Thank you very much and thanks for watching.

[@actifenpleinair3784]

Excellent video, and I like your troubleshooting techniques. One thing, though... You spray brake clean into the sensor hole on the front and that is a huge NO NO... brake clean will dilute and make useless the pre-loaded grease in the wheel bearing, possibly leading to early bearing failure... Best to clean it before you remove the sensor. Cheers!

[@Down2hunt]

Great video and explanation. You do need to move your slotted brake rotors to the opposite side of the burb though. They are in the wrong direction

[@billfrayne2462]

Really good job man, quality work and very informative!!!

[@TerenceDIY]

Thank you Bill and thanks for watching!

[@mbjeep7]

good video bud, going to test mine. very clear and helpful

[@TerenceDIY]

Thank you and thank you very much for watching.

[@joemonbluesandbbq1438]

I had this pop up for either a p0300 codes aka arcin thru the spark plug boot to the coil mountin nut, like lightnin causin misfires...new cables cured it, to a faulty brake light switch $10 at the pedal, and a faulty oil press sender...all bs as there nothin wrong w the actual ABS or sensors...whatever...jeeeeeez...thanks man...nice vid

[@TerenceDIY]

Agreed! Thanks for sharing and watching!

[@markdeserres4626]

well done! good video

[@TerenceDIY]

Thank you and thanks for watching.

[@arleneportsmouth1263]

10:08 " Pretty simple installation..." Me: 🤔🤔🤔🤨🤨🤨🙈🙈🙈🙉🙉🙉🤯🤯🤯 W H A T ? ! ? I call bullshit. 😂😂😂 Clearly one must have EXTENSIVE EXPERIENCE in Auto Mechanics. NOT a job for a massage therapist. 😂

[@ajcates9136]

You saved me I’m subbed now we even got the same rotors lol 😂 thanks

[@TerenceDIY]

Lol. Thank you SO much for subscribing abd watching my content.

[@arleneportsmouth1263]

Specifically, which OBD SCANNER do I need to get to pin-point the EXACT CAUSE of the "STABIL-TRAK & TRACTION CONTROL" issue ? Since 2012, ( when a guy name Lynn Virgil Haas stole my 2007 during this time & had it for 6 months ) I saw "TIRE PRESSURE MONITOR" warnining light. I got new rear brakes and then 2 months later, 4 brand new tires and started seeing the Traction Control & Stabil-Trak Issue. I purchased the Suburban in 2011 in St George UT and it came from an original owner (a Bank President) in Chino, California.

[@TomMassé]

That's good work. Thanks.

[@TerenceDIY]

You're very welcome Tom. Thank YOU for watching.

[@williamholt3741]

Great job

[@TerenceDIY]

Thank you and thanks for watching.

[@kishmabelin8084]

What else would cause traction control and stabilizer light to come on after replacing wheel speed sensors, spark plugs and wires? There is no play in the wheel hubs or noise, no rough idle. Just comes on and stays on.

[@TerenceDIY]

Plugs and wires has nothing to do with the traction control/ABS system. What year, make and model is your vehicle? Please let me know.

[@kishmabelin8084]

2013 Chevy suburban

[@TerenceDIY]

Okay. Is the service engine light on as well? Despite the traction light on, it still drives fine correct?

[@kishmabelin8084]

No service engine light on that's why I'm baffled

[@TerenceDIY]

You are getting the message of "service stabilitrak, and traction control across the screen correct? Although the service engine light is not on, there are codes stored in BCM that needs to be read in order for you to pin point the issue. A regular OBD II scanner will not read those codes. I have dealt with many situations regarding those lights. A common issue was the "Steering Wheel Position Sensor". I am not saying that is your problem, but I would not be surprised if it is.

[@ElisaFlores-f1p]

Could a faulty abs sensor cause the traction control to come on in my vehicle? I’ve been having trouble with traction control coming on and staying on, rough idle and won’t accelerate. i recently replaced the tps and it minimized the rough idle but that was with it off. With traction control it just stutters when i try to accelerate and i’ll only be able to get some speed when im down hill. It’ll be off and i can drive fine sometimes but recently it’s either off when i turn on the car but comes on when i push the gas pedal or it’s immediately on when i turn the key and won’t come off so i just leave it alone for a few hours hoping it’ll go away. I have my check engine light on as well and my dad ran the computer through it and the engine has about 11 codes but i just wanna know if you could possibly give me some insight on why the traction control specifically could be coming on. Thank you! My vehicle is a 2007 GMC Yukon

[@skyfly8904]

My 08 tahoe traction and stabilitrac comes on during breaking when its cold out do you happen to have the link to all 4 that you bought

[@TerenceDIY]

Here is the link... www.ebay.com/itm/284595346530?fits=Year%3A2008%7CModel%3ASuburban+1500%7CMake%3AChevrolet&hash=item4243345c62:g:UngAAOSwl15h1UHV&amdata=enc%3AAQAIAAABAKZWg6mQ8Hr1v3AIki4njB%2FqaiNpV%2FXIzwmEZWU5u4dQVJDGcPAxTKGT5HfSTprCEP%2FqsLY8retXqK3ip7y%2F8OBgCtIFmrIht7klvHMuugEU6RSi3grn6Ow0MhXkpXkglTCtWvgwJ9r6tXG5IYP%2FcBqLy1RyysjGK%2FDPpw7JxpNuRqi%2FVoxGl09EeWypblsHI7KFAfzqbo37xZwJcfK4%2BBZkhlVgaBQofSpfb3%2FylWeGEJTK%2FX5Ms9ijtPxYZemX3br%2BiSUv2ywWWordZhcrRDOFFZjCTNZevGYzUlcgLcfk0sgXzFohQlR8ghV3waSV6JB%2BXR8e14O8gP5sg132izs%3D%7Ctkp%3ABFBMoOSWmPZi

[@rickyrichreacts9667]

Gotta 07 Silverado. It goes on and off randomly every time I drive but the good thing is it no longer jerks when I go at low speeds for some reason idk why it stopped doing that 😂

[@swiftdrifter1402]

Did your vehicles engine idle rough before you changed the speed sensors?

[@TerenceDIY]

Nope. It ran fine.

[@swiftdrifter1402]

I think now it’s the upper engine mount bc it’s completely rotted out. If not than I’m pretty sure it’s an O2 sensor. Thank you Terrance

[@TerenceDIY]

You're very welcome. Let me know what it was when you figure it out. Thanks,

[@arleneportsmouth1263]

The question I have for you is if I should have the Chevy dealer view this video of yours prior to doing the work to rectify this issue once and for all.

[@luiscarranza3543]

Got the same 3 lights on ,

[@TerenceDIY]

What trouble code?

[@zoltarp]

Me too, just replaced all 4 sensors. Still the same messages. I need to capture the wheel sensor live data.

[@zu1502]

So 8 sensors in total ?

[@TerenceDIY]

4 sensors. One for each wheel. Here is a link for the part... www.ebay.com/itm/254002124510?fits=Year%3A2007%7CModel%3ASuburban+1500%7CMake%3AChevrolet&epid=6026967298&hash=item3b23b4d6de:g:~LkAAOSwnIlefHRg&amdata=enc%3AAQAIAAABADBePGi9JAZdLvbeQgf%2BSC6QRs8rWFbJWf3oy3inqiMhkEnRxROKCuje7r52%2FVITWAWHJL%2B8w6dB7RCWzS1BltX%2F%2FgZvCPQB%2BrX0Z0BCxL3UjcYvX1nXN7jr5i6OO1qBA4j32y2%2FfCoHT5iTF2WsB5KF1w0b5xOUAzGNeW0%2Fyk%2BRdAcFYZUMHlooUcX3E9swA0RWcdb%2B6LSLwtOeGkMRVWdVz0deITOAyQeIxuc%2BHxCEYe8raEp1qfWueXGyFJmyITV1sMJsDzfIuiQk350BwOwgBvNYl2PAJIAIFPaBLTyzZtWlg%2B8nuZcvQv4T2RuAq81aQhFcToSb8kZXsP0Z31M%3D%7Ctkp%3ABk9SR8Ctpr-mYw

[@austinanderson6669]

I can't even start the engine when i turn the key it cranks like as if i have a dead battery but the battery is reading 12.8

[@TerenceDIY]

Hi Austin, does the starter seem like is dragging? Or is it clicking when you try to start it?

[@arleneportsmouth1263]

Alternator issue ?

[@MrArtz187]

Same too today

[@tokes9098]

Mine just popped up and has a hard shift from first to second and the engine power is reduced Edit: my RPM was also building up to 1000 when I was rolling on the street with foot off the gas.

[@TerenceDIY]

I have a video on my channel for that fix.

[@tokes9098]

@@TerenceDIY I seen the video of code p0171 and found that the same line was disconnected and the plastic as broken

[@tokes9098]

@@TerenceDIY thank you that video did help a lot on getting my angry dad back on the road

[@randyelkin7258]

​@TerenceDIY whats the video? I couldnt find it. Mine has the same issue as this commenter's after a throttle body cleaning.

[@comaradelee]

can u just clean the sensor?

[@TerenceDIY]

Unfortunately, no. They don't cost much. Here is a link for them. www.ebay.com/itm/284510038600?fits=Year%3A2009%7CModel%3ASuburban+1500%7CMake%3AChevrolet&_skw=2009+chevy+suburban+wheel+speed+sensor&itmmeta=01JAXYWYSB2EE9D7ZT41C659S0&hash=item423e1eaa48:g:6-AAAOSwcdJgy3wW&itmprp=enc%3AAQAJAAABAHoV3kP08IDx%2BKZ9MfhVJKlk%2FAnMWBiGfjTlZokoVTILPvaw2I%2FFauSoxz0up5zC8y7ymfUDKYmyDohNpsGhCEc5HXAqALjEPzxswG9z5luFgqKAhvZeq3Mc3Fb%2BZkbKBaCaCU44N%2FoWIZT0x8WVHt3DxDKjrnhipHQTwCechxdQK79R2xGv3k4QG8P2l46aDqtMVxD2IoFQ4HbNmMl%2FLj1nJKAQJxDk7qLzKh8zyelQsMoPygl6ZzEXTkwBE1GKwMr1Cgc8qwBjq0RaRQHVYxIJPfijexjz11TqyW%2FO369JQvre8Dpjrj%2BXcR4S2zfBtRIX7BkQzQn8tHcBUlrk%2FKE%3D%7Ctkp%3ABFBM8Ozzvtdk

[@ElisaFlores-f1p]

Could a faulty abs sensor cause the traction control to come on in my vehicle? I’ve been having trouble with traction control coming on and staying on, rough idle and won’t accelerate. i recently replaced the tps and it minimized the rough idle but that was with it off. With traction control it just stutters when i try to accelerate and i’ll only be able to get some speed when im down hill. It’ll be off and i can drive fine sometimes but recently it’s either off when i turn on the car but comes on when i push the gas pedal or it’s immediately on when i turn the key and won’t come off so i just leave it alone for a few hours hoping it’ll go away. I have my check engine light on as well and my dad ran the computer through it and the engine has about 11 codes but i just wanna know if you could possibly give me some insight on why the traction control specifically could be coming on. Thank you! My vehicle is a 2007 GMC Yukon.

[@TerenceDIY]

Yes, an ABS sensor can cause the traction control light to illuminate. However, you said you have about 11 codes. The traction control along with the service engine light also illuminates when there is an issue with the vehicle by placing it in "limp mode" to decrease further damage. I know your vehicle pretty well and just with the few symptoms you describe, the ABS sensor it not your issue. Can you tell me some of the codes? I am pretty sure some will be the same and others will correlate.