Your first high output alternator / Su primer alternador de alto amperaje

[@TheKenzaya]

You guys have most definitely established a foothold in the car audio community. Great service and detailed videos like this set you apart.

[@autotechengineeringusa]

Thank you

[@2008guelo]

About time someone uploaded the right instructions I purchased a high output alternator for my Toyota Sienna but I was only getting 11.86 volts at the battery with the engine on s to battery post L to 12v fuse they told me I could use my same belt but the alt was killing my new agm battery, I sent the alt back for testing ... Gracias por el Video 🙏🏽

[@realracer44]

So guys I sent the alternator back to autotech. And must say Samuel is the man. He fixed my alternator and I works perfectly. I give autotech two thumbs up. Will make more purchases from these guys very soon. Also I must mention that I talked to Samuel personally on the phone, he is very intelligent and patient. He explained all that was wrong with my unit and also asked if there was anything he could do to make things right. You will not get that service from the bigger company’s.

[@Ninoo187]

Just the fact that this video is also in soanich, makes me choose this company, the prices are pretty good as well.

[@ichariathairu5510]

Awesome product.....big fan from Kenya Salute!

[@masetamix]

Vivo en una isla en el caribe y soy musicólogo y apasionado por car audio.

[@elulysero8863]

Why not ground the alternator to the battery negative ? Or does alternator to chassis work best. My current set up is: Alt + to batt + Alt case - to batt - Batt- to chassis - Block - to chassis -

[@johngray2526]

Ok brother just tried new belts I ended up putting the original belt back on I've also got a new battery & I need to know for sure that the extra ground lug that came wit my powdered coat 320A gold series where should I connect it to battery or chassis

[@helio7946]

Pregunta la resistencia que tienen los conectores para que sirven ?

[@DGGuaglianone]

Thanks for the advice and information

[@seangowan7441]

I have an 04 tahoe, do i need the harness adapters? I plan on running a winch, some off road lights, and a very mild sound system.

[@johnwilson8693]

I have a question. I have a 2012 Gmc Sierra 1500 5.3 and are looking to upgrade to a high output alternator. My truck has the factory regulated voltage control system ( RVC ). My battery is stock and my terminals and cables are stock. I don't have an aftermarket sound system or winch or anything that demands alot of power. What all would i have to do to accommodate a high output alternator for my application? My truck is a daily driver and i want to upgrade for more reliability.

[@autotechengineeringusa]

for detailed tech assistance and recommendation, email : [e-mail]

[@seangowan7441]

Can i just plug the oem harness into your alternator on my 04 chevy tahoe?

[@jeremyf420]

i know i cant wait to get mine in tomarrow and hook her up i got a 320 amp alt mechman js no one else would custom buid one for my car and autotech did of course build one 320 amp for way better prices

[@BrettHoustonTube]

Why not run ground to battery from alternator?

[@JonesCoWoodworks]

I’m trying to find a 320 amp alternator for my 2006 Scion Xb but no one seems to have it. Do you have one that I could purchase ?

[@autotechengineeringusa]

on our website, 800-345-4952

[@JonesCoWoodworks]

@@autotechengineeringusa I actually looked it up right after I sent this message. Thank you for responding so quickly though

[@jimmyramirez8844]

What is the ideal rpm amp out for the 320a.

[@sheeeeeeshhhhhhhh1720]

Question.. after time does the inside get black dirty because it’s giving me burnt alt vibes ?

[@SlamryCamry19]

I have a question just trying to understand how everything works I ordered a 290 for my 19 Camry and I have been rerunning the bypass test you guys had me do and honestly it's different from what everyone has told me I unplugged my alternator wiring harness and started the car expecting to see a battery light or a charging system malfunction indicator but neither happened it started up like normal no lights or indicators but when I first started it up the voltage was around 13.2 like normal which is where my lifepo4 rests at so I didn't think anything of it but after driving to Napa to get the belts while I noticed that my voltage was at 13.5 and fluctuating between 13.495-13.510 and no matter how long I drove around or how many times I reported the process same thing no light or indicators just a half volt drop which isn't a problem my car is PCM controlled and I thoroughly researched it before making the purchase so I knew before hand it was going to be a 50/50 shot on some type of voltage issue that is the reason I got the voltage control to combat it as best as possible and charge higher but what I'm wondering is if this is a common thing I have seen videos where guys with external regulator or voltage control charging around 15.2 tops instead of 15.8 around a half a volt short just like I saw today and if so can you please tell me the best ways possible to combat it other than grounding everything and doing a straight run to my lithium bank just trying to understand everything a little better and the best ways of troubleshooting ( IF) being the key word I see the same thing after installing your equipment

[@LCKxReCKLeSS]

Where can buy that booster harness to plug into my factory harness ?

[@Ninjasraynonu3]

How do you guys remedy stretch belt systems? It’s kinda difficult to find half inch sizes at least for the 17 escapes

[@autotechengineeringusa]

An only go a certain Amperage for stretch belt systems

[@Ninjasraynonu3]

Would 370 be the max?

[@Ninjasraynonu3]

@@autotechengineeringusa also do you guys/ can you guys create a pulley that’s textured for better grip?

[@autotechengineeringusa]

@@Ninjasraynonu3 do you have one now?

[@autotechengineeringusa]

@@Ninjasraynonu3 no and those who say they have one stopped offering because it did not work

[@luise.martinez60]

Acabo de recibir un alternador que les compre para un Toyota Tercel 97 Quisiera saber cómo instalar el plug porque me trajo uno de dos cables

[@drvictoria07]

Can I just use my stock alternator harness or buy a new one?

[@autotechengineeringusa]

Depends on what you ordered and what vehicle

[@drvictoria07]

@@autotechengineeringusa I ordered a stock replacement 300 amp 6 phase hairpin alternator for my 2004 Chevy Tahoe 5.3 liter V8. The guy said it's a plug and play so I'm assuming I just use my stock alternator harness right?

[@EliDiaz-y8y]

Algún Link para comprar el Alternador estimado..

[@realracer44]

I ordered a 320 amp alternator for my 2016 ram 1500, as soon as I started the truck I had a low voltage light on the dash. Also lights flicker on occasion, the next day I started the truck with the remote start and when I opened the door the truck turned off I though to my self that was odd. So I decided to remove the auto tech alternator and reinstall the stock one and bam truck was perfect again, no lights flickering, no shutoff with remote start, no low voltage message. So I called customer service and was told to get a meter for my dash, ja no no no. I nicely told the lady on the phone that I was not driving my truck with that low voltage message on all the time ( it’s annoying ). Her response was that if it was putting out the voltage the alternator was fine and my truck was the problem, and if I wanted to send it in I could but I would pay for shipping costs for a unit that is defective, I don’t think that is fair at all. I hope when it comes back it works. Honestly I bought mine from auto tech because they had good reviews, I just don’t think it’s fair that the customer has to pay for mistakes that are made. You can’t order the wrong alternator because on their website it asks for your vehicle year and make, also engine. So I really hope when I get it back it works. I have the big 3 on my truck, can also add videos of the random stuff the truck does with the auto tech alternator compared to stock if anyone is having the same problem out there.

[@autotechengineeringusa]

Every unit is tested twice before they ship. We are the only company that provides video proof as well. Things do happen and we are more than happy to show you your alternator performance on a video. We don't know your setup. We appreciate you posting on here, but if you really want help then please call to speak with us. We are also the only company that provides a telephone number

[@STELLAR_QRU]

what ended up happening with this?

[@SlamryCamry19]

Did you ever get the problem fixed just wondering and if so what was the issue did it wind up being the alternator or something with the truck

[@RUSTONE31]

Why does mine when I have my music loud and that's everytime I do, my volt meter line passes 15 volts and everything shuts down until I lower my music specially when my bass his loud

[@HoUsEoFcAtS78]

So I have a question. I am getting ready to install a high output alternator in my 2008 Mazdaspeed 3. And the alternator has a three-pin connector on the alternator itself. But only a two pin wiring harness that plugs into it. Now my question is if I unplug the harness the battery light goes on. So when I depend one of the pins from the harness itself and plug the harness back into the alternator, battery light comes on. Doesn't matter which wire I unplug. The battery light comes on either way. So when I probed the harness itself, both pins actually are grounded somehow. The new alternator comes with its own individual harness. With one wire going to the positive battery post on the alternator. And the other wire. Now my question is, what will keep my battery light from coming on when I install the new alternator considering the factory harness is not plugged in? Will that affect my charging or the cause the battery light to come on when the alternator is finally installed?

[@autotechengineeringusa]

you will NOT use your factory harness at all. if you need technical help, please call us

[@tepaul89]

No puedo encontrar una banda mas corta para un 2005 jetta gli alquien que sepa el modelo de banda

[@hjcgomez3129]

Amigo se puede repotenciar el alternador de un escarabajo

[@drfoulcheese]

Do I use existing alternator power cable with the new 1/0 power cable I add or just use the 1/0?

[@autotechengineeringusa]

you an use along with big3 upgrade

[@gavinmcclure8047]

They only had 2 different belts when I ordered this past time and they refused to look for any other belt. Is there a way you could find the part number for a belt for me? I have a 2002 Yukon xl 5.3 and I got the 400 amp alternator from you just a week ago (well I just received it a week ago)

[@gavinmcclure8047]

They gave me a 29.9/16’s belt is that correct I paid 69 bucks for it

[@Dre221]

I have a 320 amp h/o from you guys and when I start the car it takes forever for my voltage to get to the 14’s I have the big 4 done with double runs on everything and 2 chassis growns what can be the problem, or should I get a voltage controller

[@autotechengineeringusa]

Depends on a variety of things, not just the alternator

[@joecooke899]

Autotech FTW!!

[@masetamix]

Cómo puedo adquirir un alternador de 280 amperios?

[@autotechengineeringusa]

Autotechengineeringusa.com

[@johnysmashalot411]

What company is this?

[@autotechengineeringusa]

Our own. The channel says it all

[@ogairbender808]

I need an alt for a Subaru Forester 2003

[@autotechengineeringusa]

Autotechengineeringusa.com

[@johnysmashalot411]

JS alternator?

[@autotechengineeringusa]

No. Unlike some companies, we build 100% of our units ourselves.

[@autotechengineeringusa]

No. We build our own units

[@johnysmashalot411]

Aw man i wish i would of went with u guys.

[@johnysmashalot411]

So this gm voltage controller will work with a second alternator on its own for my audio system?

[@autotechengineeringusa]

@@johnysmashalot411 if it is a 2pin gm voltage regulator then yes