Your PS5 HDR is Probably INCORRECT! Here’s Why

[@DanielZH]

PS5 Video Output Settings Explained: kzbin.info/www/bejne/ZpamZJWchrWtnbc Best PS5 Audio Settings for everyone: kzbin.info/www/bejne/nnuxiKStfJ6hhLM Do you like to support us? (Even a little is a lot) kzbin.info/door/zoK1582e2w41kUG0MnUOzwjoin Join Our Discord Server: discord.com/invite/ykkWZGrV29 Telegram Channel: t.me/Danielzh1

[@LayerZlayer2000]

barrely visible isnt correct it has to clip meaning you gotta have it there where its barrely there and then the next where you cant see it

[@paulsmith2823]

Mate where are these 3 screens to ajust my ps5 dosnet have these screens to ajust hdr

[@johnshawdocherty7594]

Really hope they can make all this standard in time really annoying having to change for different games

[@DanielZH]

Agree, if all games use this the same way, there won't be any issues.

[@jakedizzle]

Yes I would like to see the black levels video mentioned at the end. Thank you for this video. It’s perfect.

[@DanielZH]

Thanks! I'll work on that!

[@DJMizzy]

Omg!! This is so epic because I’ve probably adjusted and readjusted my hdr several times wondering if I’m doing it perfect. Thanks Danial jon.

[@DanielZH]

Thanks! it's usually a little confusing that's why there are videos for each game! but I found these settings to work fine for top and unbroken games!

[@Kung_Fu_Kenny]

This goes against every recommendation I’ve seen from channels like HDTVTest, ClassyTech, and GamingTech. Not saying you’re wrong but these guys are pretty reliable.

[@DanielZH]

as it's dependent on each game, there's not a single set-up for all games!

[@TheMETALICA40]

Cant find classy tech video about this

[@BluD]

Make sure you have hgig on first otherwise the calibration won't work

[@jakedizzle]

Can you do one for HDR Always On system setting for games that don’t support HDR? I use it for PS4 games. Sometimes I’ll have DTM On or HGIG depending on the game. Curious if the system level calibration makes a difference.

[@DanielZH]

Nice Idea, I'll test it for non-HDR games and see how it affects the peak brightness, and will make a video about it.

[@giuseppemingione3839]

HI! Thank you very much for the video it was very well done and was very helpful, I have a question, but regarding film production, what procedure should be followed for calibration of HDR? I have a Panasonic mz1500 and I use professional 2 for films and the tone mapping is active so I have more clicks for the hdr than the ps5, A thousand thanks!

[@yugorisfriwan]

i guess the takeaway is, HDR gaming isnt quite consistent yet from game to game, and its frustrating sometimes, since i jump from game to game frequently, and sometimes having that one game that doesnt look good in HDR wihtout a tweak in calibration settings really annoys me, up to a point where up until i finish the game i just play in SDR (especially if the game doesnt have an ingame turn on and off HDR setting), but if the Devs actually master the game with great HDR, mann it looks amazing

[@DanielZH]

Exactly! Hope they all follow the same system settings someday.

[@marlo.g.e3908]

Hey man, my tv is samsung AU7000, whats the best HDR settings for it?

[@gocawot4165]

Unbeliavable content my man. Discovered your Channel today and subscribed imediatly. Searching for the best ps5 hdr settings with my new x90l brought me here.Can you give me some tipps on how to get the best out of it? I don't have big knowledge about tv settings. What does tone mapping do? Does it overdrive ps5 hdr adjustment? Thanks in advance and have a great day 😊

[@DanielZH]

Hi thanks, Tone Mapping adjusts the brightness and visuals to be visible in the supported range on TV but can also cause inaccurate brightness levels, for sony TVs it's usually recommended to calibrate with tone mapping off, then after calibration using gradation preferred. you can find much more info about your TV here: www.rtings.com/tv/reviews/sony/x90l-x90cl

[@joelxenoulis-malafouri6043]

Happy 2024! Can you please tell me how many clicks in steps 1,2 and 3 on ps5? I have Samsung Q60B 55'

[@DanielZH]

Thanks! Probably 11 clicks are close to your TV peak (around 500 nits) if you lost details in the game (blending the sun and stuff) try 10 clicks but Samsung tone mapping is always on. for step 3 keep it on 1 click (for first-party games) or 0 if you don't want to change every time.

[@tilda5944]

Una domanda , nel video hai detto di utilizzare " gradazione preferita" sui TV Sony , ma vorrei sapere se durante la calibrazione del hdr di ps5 devo tenere acceso la gradazione preferita o devo calibrare hdr con questa opzione spenta e poi accenderla quando ho finito di calibrare ?

[@TG-Maverick22]

The amount of helpful information in this video is astounding , 5/5

[@DanielZH]

Thanks!

[@iTheViciousV]

GREAT EDIT !!! BIG LIKE

[@DanielZH]

Thanks babajun 🙂

[@Canos-9]

Hi Daniel, Great video as always mate!! Once we calíbrate it with hgig option, we remove it or not? And what about Sony’s tv, which mode we use for calibration and which one for playing?

[@DanielZH]

Hi, for most first-party games, HGIG is good, some games like FF16 are dark so in that case you can switch to DTM, for sony, I'd recommend calibration with Gradation preferred.

[@Canos-9]

@@DanielZH Soo Whats your opinion about calibrating with tone mapping off and then puting gradation prefered on for playing? I always done that from what Ive seen

[@DanielZH]

@@Canos-9That might be similar to calibration with HGIG, then playing with DTM (Half or less) but since I don't have a Sony TV to test with measurements now, I can't tell if it's a good idea!

[@EverythingPS5Pro]

So, what if your TV has HLG and doesn’t have the other DTM or HGIG and it has a max peak full screen brightness of 500nits but you still see most highlight detail at 10000nits, what is going on? Is it tone mapping? My manifacturer (philips) says the TV doesn’t have tone mapping… what are your recommended settings for me? I can use a contrast booster thats called HDR Plus and it boosts peak contrast and highlight detail and color and fixed crushed blacks, also don’t know what that feature actually is. My TV is a Philips PUS8517/12

[@DanielZH]

Hi, I did some fast research, even though they say there's no tone mapping, there is, otherwise it should clip highlights on 400 nits if you need to go to the highest and change TV settings to get a more accurate picture, I'd say do it, as I didn't find info about it in Rtings to help, but what I found is using "MOVIE HDR" is better than "VIDID HDR" that's too blue and inaccurate colors, you can still see which settings max peak brightness while not losing details, using your eyes could be a good tool on this TV.

[@EverythingPS5Pro]

@@DanielZH thanks for the help! I always tinker with my settings on the TV being that I really enjoy calibrating and adjusting on a game to game basis, thanks for your insight 💪 So I guess if there is a 35% overall white clipping on display at this HDR Plus maximum setting then I should put in 400nits peak instead being 9 clicks on calibration correct?

[@DanielZH]

​@@EverythingPS5Pro I'd recommend testing it per game bases, once for first-party games like GOW and once in other games, as long as you can see the details in street lights for example in Spider-man 2, you're fine, once it gets glow-ish and too bright, then it might be too much, but going lower is not recommended.

[@FernweHx]

Hello, I have LG 43Un74006Lb UHD TV. Can you recommend the HDR setting? It mixes with the sun in 28 clicks.

[@oliverdknielsen7508]

So im watching Lotr 4k hdr on ps5. All bright scene is perfext and dark scenes. But the scene in the forrest is seemes a little too dark. What can i do? Is it just me?

[@ShogunBai]

Hey Danial, you said we should look for KZbin Videos if we want to setup a game with ingame HDR Settings. I can‘t find anything for Baldur‘s Gate3 (PS5)! Do you have a recommendation or can you make a video about it yourself?

[@DanielZH]

Hi, I haven't tested BG3 but there's a video from the channel: GamingTech, he should setup and settings for this game on PS5 a while ago.

[@ShogunBai]

thank you so much! @@DanielZH

[@davidromero2704]

This video was recommended to me after trying to find calibration methods. So, in some games, it has gotten darker in some areas than before calibration. I have noticed these are games where your characters are given a lamp . Like in lies of P. Does that meant its normal for some dark areas because of the lamp mechanic? Of so, did that mean my pre calibration settings were off when i could see areas without a lampm

[@raymonarends8152]

Hi Danial, how is everything? I have a question, what ps5 calibration settings should i do with a samsung q90t? Thx in advance!

[@DanielZH]

Hi, due to a check I had from Rtings, it's better to be 1 step higher than barely visible for your TV in step 1 and 2. as it sometimes dims itself for smaller windows and brighter once its a bit higher.

[@raymonarends8152]

@@DanielZH thx! Will try this tonight!

[@cholahan4327]

@@DanielZH I don't think this is correct due to you can't accurately calibrate HDR on samsung tvs as you cant turn off DTM on samsung tvs even when you select HGIG (Game HDR) as DTM is always on, you will just over clip the highlights if you click until the sun disappears. For Q90t tvs it peaks around 1300/1400 nits so I'll suggest having it on 16/17 click on window 1 and 2 and 0 on window 3.

[@DanielZH]

@@cholahan4327That's also true, as there's a tone mapping on Samsung TVs, it'll never be the most accurate to give advice based on the numbers, but visuals maybe.

[@williambrown302]

What do you recommend for warzone? I feel fortunes keep is very bright and have a hard time seeing people. I have LG OLED HDR

[@jozokelava2140]

Hallo Danial,was Ich herausgefunden habe ist das bei HDR Einstellungen das wenn man bei dem Schritt 3/3 0 Klicks macht, sehen die HDR Farben etwas Grau aus also erdig so Dunkel und 2 bis max 3 Klicks sind die Farben leuchtender und lebendiger.Habe Sony x950g rund 1.250 nits und viel getestet

[@nunolemos9112]

15 clicks on first and second calibration screen and 2 clicks from left darkest point to the right...i use PS 4 Pro with SONY X90J so i hope it will be the same with my future PS 5 ✌🏻....PS - i never watch or play games in a complete dark room so 2 clicks are enough on the third calibration screen

[@DanielZH]

For that TV you can keep 3rd one on 1 click or even 0 (depending on the game!)

[@nunolemos9112]

​@@DanielZHHummm right....i will check it later! Many thanks 👍🏻

[@nunolemos9112]

​​@@DanielZHI've tried zero clicks on the third calibration screen and don't like it....i never play games or watch movies in a complet dark room so zero clicks is wrong.

[@CityBoi954]

Qaulity content as always! Good work fam.

[@DanielZH]

Appreciate it!

[@167hamzarana8]

Hi,slightly unrelated topic but I have an lg oled and the panel looks appropriately dark on 49 brightness rather than the standard 50.What do you suggest ?

[@DanielZH]

Hi, which model is it exactly?

[@167hamzarana8]

@@DanielZH lg BX

[@Phoenix-zm5gv]

Daniel, why you don’t recommend dtm? If its calibrated correctly it looks good.

[@DanielZH]

It over brightens the picture usually, as long as your TV looks bright enough, HGIG is the most accurate calibration (and if the game is also made based on that)

[@yo1323]

So Daniel you sugest for Sony TVs to calíbrate HDR ps5 menu, with gradation prefered and then What? We changed to off or we let it on gradación prefered?

[@apoorvacharya3158]

Hi Daniel, does the first party game calibration method apply to Horizon Forbidden West?

[@DanielZH]

Hi, yes it does, however I have a dedicated video on that one too: kzbin.info/www/bejne/hojQep-OgLeDhs0

[@Kaori246]

Struggling to get this right, I have the A95L, and when I open up the HDR setting on PS5, setting the clicks to 17 on the first screen causes the sun to disappear, but then if you wait a moment, the screen darkens a bit allowing you to clearly see the sun. If I were to raise it more to 20 clicks, the sun becomes very very faint. The next page takes more clicks than the first to make it almost disappear. At what point do I set the setting for? As soon as the screen loads, or after it’s dimmed?

[@Kaori246]

Sorry, I forgot to mention the first time I calibrated this was with tone mapping set to off. Then after I calibrated with PS5s calibration tool, I changed tone mapping to gradation preferred, so I think all is good.

[@DanielZH]

Hi as soon as it fills, as the Tone mapping kicks afterward, I think gradation perfferd also works the best in Sony TVs.

[@DanielZH]

Ok nice

[@YouD13G0]

Do you recommend disable PS5 HDR for Warzone?

[@DanielZH]

I personally have it off, due to it being darker than SDR on my monitor, but its a personal choice dependent on your monitor or TV quality

[@ThaOfficialKD]

What software did you use for capture card and windows or mac

[@DanielZH]

there is a project on github, check this video I learned from him: kzbin.info/www/bejne/qmK3enqfnap8m5I

[@iCHRIS-x]

What if my monitor is always tone mapping ? How should I set it up ? Lg 27gr95qe oled btw

[@shuckylad]

I’ve just given up on hdr gaming. I have Panasonic oled from last years line up. Superb tv with an incredible picture. HDR movies look amazing. Gaming tho I find underwhelming and just not worth it. I’ve dialled the tv in for sdr for ps5 and xbsx. Not missing hdr at all.

[@DanielZH]

Thanks for sharing! Movies are usually much better in terms of HDR, but we also have good games that give a nice HDR experience, not many though!

[@claudiosar7988]

Che TV Panasonic hai?strano

[@Phoenix-zm5gv]

Hi Daniel, if i want to use dtm all the time. What should be my settings in games that dont support ps5 hdr menu . Should i put 4000 nits or 1000 nits?

[@DanielZH]

Hi, it really depends on the game you play, every game may work differently, I have a playlist of the games HDR I tested here: kzbin.info/aero/PLfzrQ3H5ECSZYy3dFysAvz8Tq1jIer-_m

[@Phoenix-zm5gv]

@@DanielZH Thanks Daniel, but for the games that support hdr calibration menu it should stay on 4000 nits right? If i use dtm all the time

[@peterstefanik2235]

From zero clicks ??? Can you tell me when the sun is dsrk maximum . From that points how many clicks .. i dont understand you.

[@over-the-topax6133]

ciao mi aiuti a calibrare hdr col il mio tv oled lg per giocare a warzon grazie

[@ShogunTen]

I'm really tired of all these you tubers talking for hours without giving us the damn setup. Just go to the point brother

[@DanielZH]

There's no direct point on HDR

[@TheWandy1990]

hai bro.. you right about HGIG its accurate but you ever testing DTM on LG C2 callibrate alone ? not hgig first and change to DTM. i want hear you opinion. dont be wrong i know its will be no accurate but please testing it.. thanks. sukses selalu (from indonesia)

[@DanielZH]

Hi thanks, yes I tested that, there's one thing I'd consider: If you play on a bright room, DTM might be a better choice, as HGIG may look much darker on average, but for my own situation (only 100nits light in the room) I'd prefer HGIG. it also depends on the game, some games aren't bright enough like FF16.

[@TheWandy1990]

@@DanielZH yess.. but you notice different quality if you calibrate dtm 25 clik and calibrate dtm with hgig first 14 click and change to dtm.

[@jude6446]

I have lg ultragear 2k gaming monitor(2023) model with hdr 10 and when i turn it on it has way less colors on ps5 compared to sdr but on pc it looks so much better and colorful. Do u know why this is? Is it ps5 issue or settings issue?

[@DanielZH]

Hi, try to deactivate adaptive sync, and if you still have this issue, check if changing the RGB range can fix it, it's a PS5 issue with some monitors that it either becomes too contrasty in HDR when it's set to 4K or washed out, try 1440p 60FPS but 1440p 120FPS HDR probably causes that issue, right?

[@syedmib9122]

Thanks for this Great video. Can you pls tell me how many clicks on steps 1,2 & 3 for my Samsung Odyssey G7 HDR 600nits monitor.

[@DanielZH]

Hi, it seems 550nits and lower based on Rtings .com, I'd guess 11 steps will match and 12 will blend. for step 3 value 0 for other games and 1 for the games that follow PS5 system and not black level raise.

[@syedmib9122]

Thanks a lot.... You're really a life saver for Gaming. Please Keep it up....

[@kaponi20k74]

Can you pleqse tell me how many clicks on steps 1,2 & 3 for my tv sony x90l

[@syedmib9122]

@kaponi20k74 For Sony x90l - set 17, 17, 0

[@yairsexx]

Amigo me ayudas tengo la u6k mini LED llevo mucho y no se cómo configurarla en 1 2 y 3

[@Evaquiel]

in the first example (970 nits), how many clicks did you go for each screen?

[@DanielZH]

15 Clicks for 970 Nits.

[@Stannihunny]

I got the A95L and Use the Auto Calibration! Im Not a friend of this accurate Settings like from HDTV Test and something Else! HGIG from my old C1 are way to Dark 😬 for me

[@DanielZH]

Hi, the Sony's Auto Calibration is not bad! yet you're always free to test games on SDR and if they look better, simply use SDR.

[@Stannihunny]

@@DanielZH i don’t Buy the Flagship Tv for SDR everything is Fine my Friend! I would say many People don’t like the Ultra Dark Settings that are accurate yes 😬 But Looks very dull/dim in many many Games! Many Gamer Love the Samsung Colors me Not 😬 is Personal preference in the Most cases! Sorry for my Bad englisch 🤣

[@Not_Ion]

Hey, Danial! Could you perhaps do a Demon Souls video in the future?

[@DanielZH]

Hi, I might!

[@ik4659]

I have a Vizio MQ7 (60Hz only despite supporting ALLM and VRR). HGIG is called "Game HDR" on my TV. Setting it to On makes the "click" behavior much different than when it's off - it takes less clicks in Game HDR to achieve "peak brightness" than when I have Game HDR off (which switches to DTM instead) - in which case I basically have to turn it up all the way up to max before reaching "peak brightness" in the calibration menu. My TV caps at 600 nits. I only use my PS5 for exlcusive games (both first-party and third-party like Final Fantasy). So should I use Game HDR with sun blending into background (since I don't think I can get "Just visible" with Game HDR) or should I go with DTM and achieve "Just visible" as there is finer grain adjustment with DTM? Also, I don't want to have to keep going into the HDR Menu every time I want to play a game - that's annoying. I use Dolby Vision for Games on my Series X, so Game HDR is disabled anyways and it's seemingly of a non-issue on that end.

[@DanielZH]

Hi, in your case Game HDR would be a better choice as DTM will always tone map and won't let you reach the needed brightness especially if the game can't go as high as max (10K nits) For games, some games like FF16 typically look better on SDR, I think it could be fine to switch HDR depending on the game and how it looks.

[@ik4659]

@@DanielZH Thanks for the response. I will definitely keep it on, then.

[@andrearossi1960]

I'm sorry Daniel if I insist but what do you mean when you say blend? that the sun must disappear completely? And therefore absolute white without the sun and in black when you say absolute black even there without the sun being visible at all, right? Are these settings also good for fc 24? Good night 

[@DanielZH]

Yes, for FIFA 24 specifically, when it is barely visible, go +1 higher in 1 and 2, and step 3 on zero clicks.

[@andrearossi1960]

@@DanielZH Is this setting also good for games like calisto protocol, and other third person games?

[@DanielZH]

Some of them need some changes in the game, like Callisto has an option to fix black level raise, but for the console yes it's good for them as long as they work fine.

[@andrearossi1960]

@@DanielZH but to have a good black level, it's better to lower it than raise it, right? otherwise if we raise it everything becomes a little foggy as if there were fog

[@andrearossi1960]

However, I know that in games there are options inside too but in that case the pleasantness is subjective, I only meant the option of the PS5 of the 3 suns

[@andrearossi1960]

hi daniel, are you okay? I see you no longer respond to my messages, I hope you're well, listen but in the fc 24 settings how much should I increase the nits? I put the maximum which is equivalent to 100 or half in the video settings of the game?

[@DanielZH]

Hi, I was a little busy these two days, for FC 24 once you calibrate on PS5, even if the game is on 100 it looks ok, but to be more accurate you can clip both squares (start from 0).

[@edgarhasbun5643]

Hii I have a Samsung bu8000 Tv, what do you suggest for the HDR settings?

[@DanielZH]

Hi, i can't find it on Rtings so I'm not sure how the HDR is on this TV.

[@fall-neckthetallneck2977]

So question, if the PS5 is following the system level calibration for first party games. Should i set my Sony X90K's hdr tone mapping to off, set it up in the system settings hdr calibration and just let the ps5 handle all the tone mapping? Wouldnt that make the most sense?

[@DanielZH]

Hi, it's best to have tone mapping off in TVs in general if they give you the option! and only use them if there's an issue, like when the mirage is too dark on default calibration, tone mapping would help. I'm not sure about X90K but you can Try this HDR Tone Mapping: Gradation Preferred Peak Luminance: High and see how it looks, however I don't have an X90K so there might be other settings you can change!

[@fall-neckthetallneck2977]

@@DanielZH Yeah, with tone mapping off the calibration is somewhere in between the 12th to 13th click(so 630-730 nits), with gradation preferred I have to set it to 19 clicks which is like 1,700nits. It looks mostly the same, maybe just a bit less bright with tone mapping off. But I guess I'll have to test some games out and see what I like best.

[@fall-neckthetallneck2977]

Interesting, somebody said to calibrate it like this. Tone mapping off, click the first two screens up until the sun completely disappears. Set the third all the way down as far as it will go. Then set tone mapping to gradation preferred. Done.

[@DanielZH]

@@fall-neckthetallneck2977Exactly, as PS5 steps are huge sometimes, it may look better in that case, but from what I tested so far on many Tonemapped TVs, they all look alright, but see which looks better to your eyes without losing details!

[@DanielZH]

@@fall-neckthetallneck2977oh, that may give you an effect like calibrating with HGIG and then playing on DTM, which overbrightens everything and you'd lose details! I wouldn't recommend that generally! haha

[@saadsaif821]

Hi can you please tell me how many clicks for samsung q80b tv? For first option I make the sun disappear completely, and in option 2 i do 15 clicks before sun disappears or blends to the respective white background color, and in option 3 black level the sun completely blends and disappears at 15 steps same as the option 2. Is this the right pattern for adjusting hdr?

[@DanielZH]

Hi, it's a good way overall, as all Samsung TVs have tone mapping, there must be an actual measurement and adjust based on that, for step 3 of 3 keep it 0 clicks and it should work fine in most cases, if you got issues for darks, go 1 step higher.

[@DanielZH]

and 15 clicks 972 nits seem fine, as your TV's 10% window size is around 870nits.

[@saadsaif821]

@@DanielZH so basically 0 steps would mean complete disappearance of the sun to black?

[@saadsaif821]

@@DanielZH and 14 clicks would be how many nits?

[@andrearossi1960]

so it's better to put the sun barely visible in all 3 steps right? I use it like this. Hi Daniel, a hug. 

[@DanielZH]

Hey! Thanks, for first-party games like Spider-man 2, GOW, and great games like them, yes, for other games it's better to be blended!

[@andrearossi1960]

@@DanielZH what do you mean by blended? 1 and 2 steps absolute white, 3 steps absolute black?

[@andrearossi1960]

all 3 steps without sun, the sun must completely disappear right?

[@DanielZH]

@@andrearossi1960No, I mean when it's barely visible, go 1 step higher to make it invisible, and step 3 of 3 absolutely black!

[@UnitedRedDevil13]

So for a game like apex legends..steps 1 & 2 keep it 1 click before it goes invisible and in step 3 keep it completely black?

[@dabuckets9703]

I’m delayed on 2k cause my quality is bad 🤦🏽‍♂️

[@DanielZH]

what do you mean 2K?

[@Luis_Fran]

Hi all! Tell me if anyone has a redmi tv x65 and how to properly calibrate HDR, I tried everything and 15 clicks on steps 1 and 2, but still the picture looks dark, and SDR looks great!(

[@DanielZH]

Hi, maybe your TV brightness is not high, so SDR would look better, however there might be settings regarding that TV to help on the internet.

[@paulsmith2823]

How the hell is every one getting to these 3 screens to ajust the setting?i cant find the option in my ps5 .im using a smaung oldded

[@DanielZH]

Hi, screen and Video, HDR section, Adjust HDR.

[@paulsmith2823]

@@DanielZH thanks

[@bostjanbeks4849]

LG C3 oled HDR ps 5 settings please. Barely visable all 3 steps or no? Thank you

[@DanielZH]

Hi, for Fist-party games like spiderman 2 yes, for other games no, make step 3 zero and clip the others.

[@bostjanbeks4849]

@@DanielZH what means clip the others? Thank you

[@DanielZH]

Making them barely visible, then 1 step brighter so the sun is invisible

[@bostjanbeks4849]

Hgig enable or dynamic on tv settings? Thx

[@DanielZH]

@@bostjanbeks4849in most cases I perfer HGIG, unless a game is too dark like FF16.

[@jayhunnel4375]

Can you do modern warfare 3 audio test ?

[@DanielZH]

Hi, the next video is about Edge settings for MW3 but also covers Audio Settings (preview)

[@oscarcrespovicente]

My Sony X9005E TV has 880 cd/m2. Equals to 880 nits?

[@DanielZH]

Hi, yes. cd/m² = nits

[@diogoferreira8525]

Ola eu tenho uma lg oled cx quantos cliques tenho que fazer no HDR do ps5. Obrigado

[@DanielZH]

Hi, for first-party games, barely visible, for other games, +1 brighter than barely visible. step 3 of 3 zero for most games.

[@Squishytoast]

I have a question on how to fix orange tone to skin on the ps5?

[@DanielZH]

Hi, isn't it related to TV settings? I'd recommend checking Rtings calibration for your TV model.

[@Squishytoast]

@@DanielZH ok thanks I’ll check it out

[@michelhernandes1262]

Que top vou testar no meu LG cx 👏🏼👏🏼👏🏼 Muito obrigado 👊🏼

[@DanielZH]

Obrigado! Espero que funcione bem

[@michelhernandes1262]

@@DanielZH no caso tenho que ir um antes de o sol sumir correto?

[@DanielZH]

Para jogos originais do PS5, como Homem-Aranha 2, God of War e muito mais, sim, torne-o pouco visível, se estiver muito visível, suba 1 ponto para desaparecer@@michelhernandes1262

[@claudiosar7988]

Sul oled panasonic lz,il tone mapping prima di calibrare hdr va disattivato?

[@DanielZH]

Hi, it's better to turn off tone mapping if TVs let you, but some TVs are more accurate with tone mapping, what is your TV model exactly?

[@claudiosar7988]

Panasonic lz 1500

[@claudiosar7988]

Si posso disattivarlo

[@kaponi20k74]

I have tv sony x90l is full array local diming, does it also apply?

[@DanielZH]

Yes.

[@kaponi20k74]

@@DanielZH are u sure?

[@kaponi20k74]

How many click, on 1/2/3

[@claudiosar7988]

Volevo chiederti per le tv che non hanno hgig nel caso fel mio lz1500 panasonic se disattivo tine mapping e utilizzo clipping ha la stessa funzione di hgig? è di 1000 nits e per avere quei 15 clip diventsndo il dole invidibile devo a maggior ragione disattivare il tine mapping

[@DanielZH]

Hi, yes, it's best to turn off Tone Mapping on TVs that let you do that to get the correct output.

[@claudiosar7988]

​@@DanielZHgrazie Daniel,sei sempre gentilissimo e disponibile👍😉.Ma invece per i film in hdr conviene fare lavorare il tone mapping del TV,giusto?

[@campos3452]

Great stuff man I for sure would like to see more on this topic.

[@DanielZH]

Thanks! Will do!

[@RamonAlek]

What about Samsung QLED? All of this stay true?

[@DanielZH]

Hi, yes it was measured by a software tool and the value is from the PS5 output, not the TV, so it works the same on all consoles.

[@smitty7329]

How does this transition for monitors? I have an lg oled monitor and can’t get this right. The last black level always seems off like too dark

[@DanielZH]

Hi, do you lose details in games or black clip? if not, you're fine.

[@smitty7329]

@@DanielZH The blacks if I go too low on the 3/3 screen for the sun image it crushes the blacks and looks too dark

[@claudiosar7988]

Perché i giochi PS4 sdr in retrocompatibilità su ps5,risultano meno saturi rispetto alla console vera e propria?ho provato a mettere 422 migliora un po',consigli?

[@DanielZH]

Ciao, li hai provati con HDR disattivato? inoltre quali giochi hai provato? normalmente non dovrebbe esserci alcuna differenza di colore a meno che non giochi in HDR sempre attivo.

[@claudiosar7988]

@@DanielZH no,ho lasciato hdr quando disponibile,si ho fatto la prova pure di disattivare hdr

[@claudiosar7988]

@@DanielZH il mio TV è un 2.1 accetta tutto RGB 12 bit anche in hdr

[@claudiosar7988]

@@DanielZH ho fatto una modifica alla gamma,ho messo bt1886 invece di 2.2 e ho alzato il livello di illuminazione a 90,adesso ho acquistato più colore essendo la gamma più bassa.Se la metto a 90 potrebbe causare problemi al pannello?(però nel n credo perché quando è attivo hdr tutto è bap massimo,giusto?

[@claudiosar7988]

@@DanielZH non basta solo disattivare hdr,ma pure il colore dedicato all' hdr così da avere un uscita in 8bit RGB e non 12 bit RGB

[@Squishmallows24]

Honestly who knows who is correct about hdr settings. Every channel or “professional” has different settings. Not sure why they make it so complicated.

[@DanielZH]

Until games use a universal method, no one is correct, haha and you need to adjust for every game.

[@Phoenix-zm5gv]

How many clicks on oled tv? With dtm

[@DanielZH]

with DTM? until the sun is barely visible (first-party games) and 1 step higher for other games. step 3 of 3 zero clicks for other games.

[@Phoenix-zm5gv]

@@DanielZH step 3 for 1 party games like gow? I have the same tv as you , lg c2. How many clicks should be step 3? Thanks Daniel🙏🏻😊

[@SCBodyboarder83]

I find I have to play around and change the settings ALOT on the tv and in HDR depending on what game I'm playing. my setting for Spiderman 2 were completely different to now playing Mirage. I do still have a Samsung Ru8000 which is still a decent TV for gaming but not the brightest. Upgrading to the s90c soon.

[@DanielZH]

That's correct, every game (especially non-exclusive games) looks different, I found brightness on 50 and contrast on 55 with the PS5 guided calibration a good one for my TV. S90C is a Huge upgrade over RU8000!

[@SCBodyboarder83]

@@DanielZH just picked up my new s90c. Can't wait to get home and set it up!

[@andrearossi1960]

daniel in fc 24 the cutscenes are not at 60 fps but at 30 right? for me the drop in frames is noticeable 

[@DanielZH]

The story parts yes! I remember some of them were 24FPS to give you a cinematic look in FIFA 23, they may not be even 30 haha, but it's ok, they're cinematics!

[@andrearossi1960]

@@DanielZH I speak in the scenes seen between the first and second half in the locker room etc

[@karenk683]

Vrr on or off

[@DanielZH]

Hi, typically fine to be on, some games may cause issues with VRR (flickering or Black level issues) and you would notice it, in those cases, turn it off, first party games are fine as far as I tested.

[@DanielPerez-hy6qi]

Barely visible, yet you made the sun dissappear on the calibration screens

[@DanielZH]

This video is on SDR and not able to show the actual HDR I did set

[@exequiel_genesis29]

Nba 2k games...pls sir

[@DanielZH]

Hi, I'll test that for Future references!

[@Loki_Games4Fun]

My TV has almost 2000 nits

[@DanielZH]

That's very nice!

[@juicewrld9996]

What about 2k tv 🥹

[@DanielZH]

The HDR values are the same, but what is your model?

[@claudiosar7988]

Che distema macchinoso,quanto valevale le console a cartuccia von tv ctr

[@DanielZH]

Yeah until they add a method to auto adjust for all games and in all TVs.

[@claudiosar7988]

​@@DanielZHcon series x la calibrazione è molto più soft,(schiacci i 4 tasti dorsali e regoli i nits del TV e basta)

[@Sam-Fisher]

Hello

[@DanielZH]

Hi

[@danielcaicedo2200]

Warzone ps5 oled

[@DanielZH]

Hi, both SDR and HDR are good in COD, use the one you like, and it uses PS5 calibration in a good way.

[@danielcaicedo2200]

Ok so should I follow exactly the ps5 calibration for warzone ? Thanks man greetings from Colombia South America

[@Joffa85]

Yeah all this bullshit is shocking

[@DanielZH]

It really goes game-to-game and TV-to-TV.

[@andrearossi1960]

Daniel I adjusted the HDR on PS5 but immediately afterwards I tried to see if the setting remained as I had set it but I found the second step different from how I had set it. If I don't go back to: "hdr rule" will the setting I set last time remain?

[@DanielZH]

Hi, that sounds interesting, what was your TV model? it might be due to some ABL, so it's better to wait on second screen for 30s and then calibrate it.

[@andrearossi1960]

what is ABL? However, the model of my TV is Samsung ue498000TXZT, thank you very much, a hug

[@DanielZH]

@@andrearossi1960ABL is an automatic brightness limiter on OLEDs, not sure if this model is OLED I couldn't find it in Rtings with the name you mentioned, but if it is not OLED you're fine about that.

[@andrearossi1960]

@@DanielZH Unfortunately my TV is only LED, I wish it were an OLED  

[@iCHRIS-x]

Hey danial , I have the lg 27 oled , so should I make it barely visible on ps exclusives ?

[@DanielZH]

Hi, Yes it seems to work well that way for exclusive games of course not every game, for example, FF16 is not good with HDR.

[@iCHRIS-x]

@@DanielZH thanks for the reply

[@DT-hy6px]

WTF are you talking about?

[@DanielZH]

Language

[@jayyemm69]

HDR is trash

[@DanielZH]

Depends on the game and the TV! there are few games with good HDR support.

[@Wickbitch]

So what do you suggest on a lg cx first 2 14 clicks and last one 1 click or first 2 15 clicks and last one 0 clicks

[@DanielZH]

Hi, as every TV may output different nits (even the same model but in different regions) it's better to use your eyes and make them barely visible for first-party games, and +1 for third party games (step 3 on zero in that case)

[@Wickbitch]

As first party you meen first person games ect?

[@user-og8kb4yk6k]

I never even questioned this until i played gow Ragnarok and spiderman 2. I changed my HDR clipping with the sun like you said in first party exclusives to barely visible and then completely blended in for 3rd party games. What a difference that made specifically for the 3rd party games. I have an hdr600 ips panel gets about 700 nits. no hgig or that sorta thing. Thanks a alot!

[@DanielZH]

Great! glad it was helpful.

[@andrearossi1960]

hi daniel, are you okay? listen I saw in the video that you were talking about 14 clicks 1 step, 14 clicks 2 step and 0 clicks in the 3rd step. But is it the same for those who don't have the hgig option and don't have the tone mapping option? the maximum hdr peak of my tv is 800nits

[@DanielZH]

Hi, I'm fine thanks, that was mainly in case of TVs that don't have tone mapping, otherwise, you may need to go higher until it blends. especially in Samsung TVs.

[@yonkocommander5531]

Isn’t all of this irrelevant depending on your display technology? Like your settings might work for oled but be bad for regular mini led?

[@DanielZH]

Typically if the game follows PS5 settings and the TV has a good HDR PQ EOTF Tracking, it works fine as showed here, otherwise you're correct, your TV settings and tech affects it a lot and these settings may not work unless the TV is fully calibrated to not tone map etc.

[@andrearossi1960]

another flaw of fc 24 is that as you play in various situations the colors become darker or lighter on their own for example: you take the corner kick and it gets darker then after a while everything becomes lighter but it doesn't do this in all stadiums

[@DanielZH]

yes, I've seen that and many people mentioned it too, the exposure adjustment is harsh, they must lower it!

[@andrearossi1960]

@@DanielZH yes the EA

[@andrearossi1960]

@@DanielZH and every now and then the characters tremble in the close-ups😂😂😂

[@RadioAshen]

The more videos you watch on this topic the more confused you end up because they all contradict each other.

[@DanielZH]

It's because there's not a single patch developers follow and TVs output different brightness based on panel and unit, but it's ok to either leave it on barely visible or going 1 step higher and 0 steps in level 3.

[@MichaelM28]

HDR is such a pain to setup I stopped using it years ago SDR looks much better on my TV anyway

[@jakedizzle]

Yeah it’s super annoying that there’s only a handful of games that do it properly.

[@DanielZH]

Not every game has a good HDR, and yes, if a TV looks better on SDR, there's no point in using HDR.

[@andrearossi1960]

Anyway dear guys I have decided that I will use HDR with all 3 suns almost visible for all games and it is quite satisfactory. I am talking about a TV with a not very powerful HDR, a 6 year old Samsung LED have a nice day

[@DanielZH]

Nice! I'd recommend changing per game bases but I hope someday all games use it the same way.

[@andrearossi1960]

@@DanielZH I hope so too, however the difference of playing with HDR and without the important thing is that it is noticeable so even if it's not perfect it's fine

[@andrearossi1960]

@@DanielZH anyway, if not I'll try to do it, first sun barely visible, second sun a little more visible and third sun totally invisible......non-existent

[@andrearossi1960]

daniel even yesterday while I was playing career coach the screen tripped like lag 😂 too many bugs fc 24

[@Nick_93]

Hi , i have Tcl miniled c805 and i notice in RGB limited HDR , highlights Is more vibrant... But i have input delay , in rgb complete input lag Is ok , but the HDR Is Better in limited..

[@BrianMcAvoy13]

When my HDR is on, it causes my TV to green shift. I've tried everything, but it's simply new tech and old tech not communicating properly.

[@thanhbinh7208]

Sorry, can I ask how many times it takes to click 3 steps for Samsung q60a hdr 502 nits

[@SnakeGamerMG3]

I really like this content.... I usually leave step 3 100% black because I have an LED TV without local dimming, so if I don't leave everything black, the colors seem more "washed".

[@vulgo_uchiha]

Tenho uma oled, quantos cliques?

[@S-420]

I found a much simpler method to fixing HDR just turn it off it doesn't belong in video games it looks like trash and makes everything look washed out no matter what you do just turn it off everything will be vibrant and beautiful

[@DanielZH]

when I just read the comment I wanted to know what is that method but then I was like 😅. most games don't have good HDR support I agree, but some are great, like GOW, Returnal, and Spider-Man.

[@jdiegotech6654]

And what about a 2k tv samsung unf7500 ?. I am instered in the best hdr for most games. And i have over ear headphones,sounds better if i use it directly in the tv output or in the ps5 controller ? This channel is so goood !!!

[@DanielZH]

I couldn't find any info regarding the HDR brightness of this TV in Rtings, try following to barely visible and 1 more, for the audio, the TV output may give you lower latency but again, I couldn't find any info regarding the input delay of audio jack, test and see which gives you a better sound.

[@m.o545]

What about if your TV has like 4 HDR settings as HDR Standard and HDR Dynamic which one would you choose?

[@DanielZH]

Hi, what's your TV model? I'd say check from Rtings .com and see what setting is the most accurate.

[@PRBLYOSCAR]

Sony 50” x85J

[@Luis_Fran]

if the TV redmi x65 has 500 nits brightness. How many clicks is recommended for the first and 2nd steps?

[@DanielZH]

Hi, I'd always recommend following the sun until it's barely visible or blended as each unit may have a slightly different output and may not be good to use numbers, but instead, visuals. also does this TV support HGIG or it uses a Tone Mapping system?