Your PS5 Will NEVER Sound The Same! (Advanced Audio Settings)

Hi, here's the best PS5 Audio Output Settings in 2023, Dolby Audio Vs. Dolby Atmos, Linear PCM Vs. DTS, 3D Audio Vs. Stereo and the best EQ Settings for Pulse 3D Headset explained like you're 5 years old.
The First True Next-Gen Game with 3D Audio: • The Future of Audio In...
Support the channel (Even a little is a lot):
/ @danielzh
Truth of 3D Audio on PS5: • The Truth Behind PS5 3...
Best Video Output Settings: • Mastering the Graphics...
3D Audio for TV Speakers: • Top Settings for New P...
Join Our Discord Server:
/ discord
Telegram Channel: t.me/Danielzh1
Time Stamps:
0:00 What is this video about?
0:18 Audio Output settings
1:10 Dolby Atmos Vs. Dolby Audio
4:32 Linear PCM Vs. DTS
5:44 Dolby Atmos for Headphones?
6:44 Linear PCM or DTS for Headphones?
7:21 3D Audio for TV Speakers?
7:36 Volume Settings + Beep Test
7:59 Microphone Settings + Fix Voice Chat on Controller
8:36 Pulse 3D EQ and Settings
9:17 Call of Duty MW2/WZ2 Settings
Stock Videos by Vecteezy.com
Hashtags:
#3daudio #dolbyatmos #ps5

[@DanielZH]

The First True Next-Gen Game with 3D Audio: kzbin.info/www/bejne/f6qWeGCjrpyWr6Msi=Tr_LVSbtmuQAKMGg Do you like to support us? (Even a little is a lot) kzbin.info/door/zoK1582e2w41kUG0MnUOzwjoin Truth of 3D Audio on PS5: kzbin.info/www/bejne/eorHY4OMrMxqrbc Best Video Output Settings: kzbin.info/www/bejne/ZpamZJWchrWtnbc 3D Audio for TV Speakers: kzbin.info/www/bejne/mIatqZZ-gqacnposi=3zYE8JiUW86Xg_iw&t=72 Join Our Discord Server: discord.com/invite/ykkWZGrV29 Telegram Channel: t.me/Danielzh1

[@angelangelo1988]

Jesus is lord repent yourself

[@dmora2386]

Be aware that there is substantial latency when using dolby and less with dts, and little to no latency with linear pcm, however there is a catch. Linear pcm as mention is superior to any due to latency and the fact that it's raw. The problem is, is that if you connect your ps5 to a non-hdmi 2.1 capable reciever, your pcm signal will be reduced to 2 channel instead of the full 7 channel mix. This is because the older hdmi spec on the reciever cannot handle the full bandwidth needed to carry the full linear pcm signal. This is why, in this scenario, that when you turn on dolby it sounds better than pcm(again bc it's being down sampled to 2 channel), but then you have latency(processing overhead). If you were connected to a hdmi 2.1 capable reciever you'd get full audio resolution and no latency which is obviously the uncompromising best case configuration. In summary the best audio will be attained from liner pcm + hdmi 2.1 capable receiver, a wired headset via usb(this is expensive and difficult for people), or the Sony headphones. A good middle ground is DTS + a less than 2.1 reciever where you still get latency, but less than dolby, and better audio quality than liner pcm down sampled to 2 channel. Worse audio configuration is headphone jack on the controller, but no percievable latency. Hopefully that's not too confusing. Sony half requires you to be an audio engineer to understand what configuration is the ideal configuration instead of providing proper literature.

[@DanielZH]

Thank you so much for sharing this information, I didn't know some of them and it helped my knowledge, I appreciate it! Soon, I'll be testing the delay for each mode, with a sound extractor, and I'll consider your notes for the video, thanks again.

[@CrissJrTheBeatMaker]

So, all this time I've been thinking I was listening to 3D audio, I use a 2K Monitor with Hdmi 2.0 and using PCM Linear, with the Sony Pulse 3D. What do setting do you recommend me to use then?

[@victoralvarez9459]

What are you talking about? There is no Dolby atmos latency on the PS5. Only on Xbox. This is misinformation

[@dmora2386]

Because if this comment I literally just retested it just now using Horizon Forbidden west. Yes, there is latency between the time a full bow charge chime places through the controller and the time it takes for the receiver to play the sound. The moment its switch to PCM the delay goes away.

[@dmora2386]

@@CrissJrTheBeatMaker You'll get full resolution with the Sony Pulse 3D headset, leave it on PCM. The problem starts occurring when you send the signal to a device that cannot handle the full bandwidth of the linear PCM signal. This can be seen when viewing what type of signal is being received, by the receiver and what mode it goes into. You may not be able to see this on your monitor however. For you the regular sony headset will offer the best experience unless you have an HDMI 2.1 spec receiver.

[@SeVeN42095]

I have Playstation 3d pulse and audeze penrose headphones. I switched to Dolby Atmos and didn't notice much difference from using linear pcm but when I switched to my Audeze Penrose they were definitely louder than before using the Dolby Atmos selection

[@DanielZH]

Hi, aside from being louder, do you feel the height level from games is different than 3D Audio? If not, there's not much of a difference overall (as there is not actually for headphones.)

[@SeVeN42095]

@DanielZH yes I feel more immersed in single player games and racing games. For fps games it really didn't help because everything was louder and footsteps were even harder to extinguish but maybe adjusting the penrose eq might help. But my question is, why do you think the Playstation 3d pulse didn't get access to the extra power that the Audeze penrose is getting? I'd say it's a 20 to 25 percent increase in volume

[@DanielZH]

@@SeVeN42095 True, Pulse 3D is overall quieter on PS5 even compared to PC, I'm not sure why, but even when you max all EQ frequencies it's still 10-15dB quieter, maybe they did it on propose or maybe it's just because of EQ to not go over 0dB.

[@hanp2205]

@@DanielZH when i use my steelseries nova pro wireless... i get a lot more volume on the pc than ps5 aswell... using the sonar app there is no sonar app for the ps5 would be cool if you could do a custom version for this headset for the ps5

[@devonhc7770]

@hanp2205 I'm using the hyper x 7.1 dongle with 7.1 headphones and both increase the background sounds and I didn't notice any big differences in either dts ,linear pcm, dolby or dolby atmos ,although dolby atmos may have a higher range of highs and lows but that's it all are the same with surround sound .

[@xboyPToficial]

Hello friend Danial. I bought a HDMI Switch with audio extractor to deal with the lack of the SPDIF port on the new consoles. It is working fine and it took me a while to figure it out. The only thing that still tickles me is that I do not know what audio format is being extracted by the SPDIF out? This SPDIF is then connected to my Astros TR through the digital in of course and my headphones are connected to the Astros. All my HDMI inputs are coming from the PS5 and Xbox Series X and in bitstream format but I am not sure if the Astros are receiving it in bitstream or even if the HDMI switch SPDIF port is getting the bitstream? Do you have any idea my friend or anyone in here guys? Thanks for all the nice videos and keep them coming.

[@SLAYER_TDF]

Definitely causes some noticeable lag... i use these different settings to deliberately add lag sometimes

[@maddoxsetser3749]

So i just purchased a pair of astro a50s the main game i play is a fps call rainbow six siege i play on ps5 what is the the best way to set up the audio i also have the hdmi adapter for the astros

[@artthoudoge-8458]

Thanks for the video man, although i have a question. I have the Samsung Q900C and i have a TV with a 2.0 HDMI. It says it can support Dolby Atmos via the HDMI Arc, should i leave the audio format on linear PCM or can i use Dolby Atmos?

[@NesTy096]

How can open the Equalizer Option? Its only for Wireless?

[@DanielZH]

Hi, yes only for Pulse 3D with Dongle.

[@NesTy096]

Oh okay, can you say me whats the best Audio setting for cable Headset, linear, atmos or dolby Audio?..

[@DanielZH]

@@NesTy096 as long as your headset doesn't support Dolby natively, Linear PCM is the best option.

[@Landonio]

What about for Blu-rays though? Does the 3D audio and/or Atmos work when watching Blu-rays with a headset (connected via USB)? I can't seem to get a clear answer on this, or just exactly what the best settings to use would be in general when using a headset for Blu-rays.

[@DanielZH]

Currently, I don't think this update adds support to Blu-ray as sony didn't mention it anywhere, it seems to be used as a method to turn Tempest 3D Audio into Dolby format for other devices, even if it supports Blu-ray Dolby someday, I think it'll be used for speakers, not for headphones unless that blu-ray disc has a native mix for headphones (which is less likely on PS5) as on PC we have apps and optimizations on app level for movies that support Dolby for Headphones.

[@ianwood6438]

I’ve noticed no delay when using atmos

[@DanielZH]

I'll be testing that in a future video!

[@andygorton332]

No delay when using Atmos for me either

[@ALEXStudio5680]

The best 3D sound is DTS sound unbound? I have LG pro x headphones, all my games will use DTS:X headphones?

[@DanielZH]

Hi, you have to use the format supported by your device to decode so it can get a correct channel output and features, most headphones accept stereo input and the processing is done on PS5 for 3D Audio not the headset, usually recommended to use Linear PCM unless you have issues (for headphones) or looking for something else.

[@ALEXStudio5680]

@@DanielZH I'm talking about the PC)

[@tonytiger1]

My voice chat and all audio are glitched because when I switch to voice chat I still hear the game audio too

[@kevinsito0801]

Thanks for the video man very informative. However I have a question. I have a Sony oled a80L with a Sony ht-a3000 soundbar and also have the rear speakers with the sub for the setup. What would you recommend for my sound settings? Btw I’m using an audio quest ocean cable for the ps5 to the tv which does support 4k-10k with 48gbps but with my sound bar I have an older audio quest cable which is the chocolate with high speed Ethernet, I plan on grabbing another ocean for the soundbar since it supports 2.1 with the 48gbps if It’ll work better then with the chocolate cable, so if you know I’d like your suggestion on that too. I also use the Sony inzone earbuds from time to time and if you can help me with the proper settings for that I’d really appreciate it. Thanks for your time….

[@vairoxx4031]

Hey danial. I have some crackling issues on loud noises on my wireless headset. Do you think I could solve this issue by using a compressed audio format like dts, or dolby instead of PCM? The reason I ask is because I red that audio output settings don't make a difference for aux or wifi dongle headsets and only work for soundbars and Tv. Is that really true? Because in your testing they do work on wireless and aux headsets

[@user-em7oz2wk4k]

I have a soundbar with a 2.1 sound system, what should I choose in the settings of the av receiver or soundbar? dolby atmos or pcm? Please help me my friend 🙏🏼

[@rozz532]

Just found your channel! Awesome, love how it’s based on Warzone with PS5 Pulse Headset. Subscribed 👍

[@DanielZH]

Welcome aboard! Thanks.

[@fubar6666]

Nice Video!! I have a Skullcandy AnC2 with no DB Atmos. So its better to use DTS or not. I hear not really a difference at first test

[@benjaminvalerio6062]

What’s the best settings for a subwoofer?

[@DanielZH]

if the decoder doesn't support dolby, use Linear PCM.

[@pankajjanghu0310]

Very well explained bro.....🙏

[@DanielZH]

Thanks 🙂

[@DogiAv]

Hey your video ist very informative! 👍🏻 What audio format and settings would you recommand to me with my Samsung Q990B surround sound setup? I noticed a sound delay when im on Dolby Atmos/Dolby Audio btw 😅

[@DanielZH]

Hi, this soundbar supports multichannel and Dolby Atmos, if it's connected to your TV wirelessly, you must ensure your TV can support wireless Dolby Atmos audio output, and not every TV supports that, Dolby Atmos overall is for this soundbar if it can decode it depending on your TV model and how you connected it.

[@b1ackest]

Hi Guys, Wondering if anyone can help me here. For a while now I have been getting crackling, static, robotic sounds coming through my headset intermittently. Initially I thought it was my headset so I replaced that have tried wireless and wired headset and it still happens. I have replaced the controller, swapped to another PS5 as I have 2, changed all the cables and still can't get rid of the sound. Has anyone experienced this and know how I could fix it? The only thing I haven't replaced is my monitor? Not sure what else to do😑

[@erkyperky1387]

I have three options connecting my ps5 to amplifier running a 2.0 setup. First option is to use a usb to optical adapter to smp. Second option is, to use usb-c to usb-b to amp. Third option is run optical or of tv to amp. Which do you think is the most efficient/give me better sound production? All comments appreciated.

[@DanielZH]

Hi, as far as my experience goes, TV is not always the best option, I'd say try USB options and see which is better.

[@Mohammedako123456789]

Danial please I need you're help answer this comment please ( I have a JBL quantum one headset which is supposed to be the top of the line headset and I bought it to play call of duty war zone and dominate noobs with it but for some reason when I try to change the audio output configuration to 7.1 or less it keeps going back to stereo and I can't use the features of the headset please let me know what you think I should check all adjust to be able to use it properly . thanks a lot brother

[@danielcaicedo2200]

Im using a fossi k5 dac and bose qc35 for warzone should I use Dolby

[@lucavanzetto351]

i have a 2k monitor and 2.1 hdmi, for warzone and racing games is best the pcm linear or another one?(i have logitech g pro x cabled as headphone) great video anyway🔥

[@DanielZH]

Thanks for the tips!

[@lucavanzetto351]

@@DanielZH which one do you recommend, the pcm linear or another one?

[@darkangelus187]

hi danial, thanks for video. I would use my Phidelio X2/hr cabled, so i thought to connect ps5 to a DAC/amp (like iFI Zen Dac v2) but the connection by usb cannot use max sample rate, and it goes only at 44khz. So, what do u think if a connect ps5 to tv, and then tv to an amp with hdmi arc to connect my headphone? connection by hdmi should be better of usb, but im not sure that tv gives the whole audio to the amp. (TV samsung oled s90c) what do u think?

[@hyro4568]

Another great video thank you for those presets the neutral preset works soooo good sounds great thnx

[@DanielZH]

Glad you like them! Thanks.

[@babalarassrah]

with pcm, my sound looks silent unlike dolby audio ( i have a soundbar connected with an optical cable)

[@wraithyyGG]

So what would be the best for comp games like siege dayz and xdefient for shooters? I use atmos on PC but idk how different it is on ps5

[@RagdeEdge]

Hola,yo tengo una barra de sonido dolby atmos con bocinas surround, lo curioso es quenlos juegos si me los reproduce en dolby atmos y sale también el somido por los parlantes traseros como un dolby atmos real, las películas y KZbin, es decir las apps del ps5 no se escucha el sonido atrás, lo que me hace pensar que las aps del ps5 no estan optimizadas para solby atmos, sólo los juegos, sabes algo al respecto? Gracias

[@joshfulcifan1015]

I've just discovered today that I have the Dolby Atmos choice finally on both my OG, and also my newly purchased Slim. When exactly did this upgrade come out for us Console owners? And do you think plain and simple "Dolby Atmos" mode has it's advantages above the others?

[@DanielZH]

Hi, it's a few months since the beta I guess, currently there are a few games like Spider-Man 2 which has a Dolby mix (and only in cinematics) we should wait and see what'll happen in the future, here's an update regarding this in Spider-Man 2 and 3D Audio: kzbin.info/www/bejne/f6qWeGCjrpyWr6M

[@marques8382]

Hello, I use a Bose 600 soundbar ( compatible Dolby Atmos, Dolby Digital, Dolby TrueHD, Dolby Digital Plus ) on an LG OLED C3, what are the optimal settings? THANKS

[@DanielZH]

Hi, I didn't have this soundbar but from the information I checked, Dolby should be fine, yet remember it may add audio delay if the TV isn't set correctly to passthrough which I'll cover the delay in the new video soon.

[@ExtraSync]

I just got the hta 3000 and the two speakers for the 36p Spatial Audio. How do I make it the best for my ps5

[@emanuelescarinci5804]

great video as always. based on the tests on warzone, in terms of audio quality for the steps do you think it is better to use EQ with dolby atmos or EQ with linear pcm?

[@DanielZH]

Hi, I personally use Dolby Atmos as it helps with high frequencies to reduce them a bit and not get a headache, aside from that, in the last test Dolby had 1-2dB more compression on average (Due to Treble compression) so it was better for me overall.

[@timothymc1]

So the best setting for a 5.1.2 via eARC from hdmi 2.1 is linear pcm or Dolby Atmos ? Also should I put 5.1 or 7.1 in the ps5 settings? Thanks

[@DanielZH]

Hi, Dolby Atmos should work fine if your device supports it, if not, Try Dolby Audio, if it doesn't support that either, Linear PCM and 5.1 is the correct output mode as your system is 5.1

[@stupidfish2]

its a bit annoying that you cant find information about pcm vs dolby setting PS5 for Razer Headset. i have a Razer Kraken Kitty V2 USB Headset and i have no clue which settings i should choose on my PS5: L PCM or Dolby Atmos?? I thought that this headset supports surround sound, but the manual doesnt say what to choose on the PS5. Should i use PCM or Dolby Atmos for the Kraken Kitty V2?

[@DanielZH]

I haven't had this headset so I'm not sure, but I know a great channel in this stuff I should check and find it I think he covered this headset too.

[@TuckingFypozzz]

Your videos are music to my ears when it comes to specifics and what not. Sometimes you're too smart for me lol. I have to ask you a simple question. For someone with a PS5 and the Turtle Beach Elite Pro 2 super amp headset... What specific audio settings do you recommend for headphones. I'm currently on 3D enabled (default) with Dolby Atmos.

[@DanielZH]

Hi, thanks, there is a lot to learn about audio! about Turtle Beach headset, I'd recommend Linear PCM with 3D on or off depending on the game, for example Spider-Man 2 or Returnal has a great 3D Audio support, Dolby is not needed when using a headset as long as the game uses a Tempest 3D Engine at its base (Most of PS5 Games)

[@TuckingFypozzz]

@@DanielZH sorry, I was referring to Call of Duty** you still think 3D audio on and Linear is the best?

[@DanielZH]

@@TuckingFypozzz For call of duty specifically I personally prefer Stereo, yet 3D audio is well made for that too. and yes, linear PCM.

[@anthonyb2579]

Thanks for this video 👏👏 If i have just a soundbar in the Ps5 i have to selected dolby atmos, dolby audio o Dts?

[@DanielZH]

Hi, if it does support Dolby formats and is detected by your soundbar when choosing it, then it's ok, otherwise I'd recommend Linear PCM.

[@ramnexus]

Thanks for the video! Lots of detail. Very informative. Do you have any plans to look at the upcoming Sony inzone H5 headphones? Cheers!

[@DanielZH]

Thanks, Personally, I wouldn't recommend any Inzone series for PS5, I've tested H3, H7, and H9, and none of them support EQ transfer or EQ settings on the PS5, which is a huge disadvantage over many third-party brands or Pulse 3D on PS5, so I'll probably ignore H5 too, unless they add EQ support on PS5. hopefully, they will, if you want it for PC, it could be a good choice.

[@samuelcordero4283]

I have a hdmi 2.1 slot with eARC/ARC And it’s been default to pcm but it sometimes sound muffled and low on certain games. I’m trying Dolby Atmos and seeing how well it works out

[@DanielZH]

Hi, typically Dolby Mix on non-native games wouldn't make a huge difference in terms of muffled sound, but you can try and see if it sounds better for you! there's not a noticeable delay from PS5 either.

[@jonathanb.7481]

what settings would you recommend for wired headphones?

[@DanielZH]

the same!

[@przemek_tadla]

If I use Pulse 3D with PS5 while playing 4KBluRay video, would it play atmos or just stereo?

[@DanielZH]

Hi, I don't know tbh, haven't had a Bluray Dolby Disc to test it.

[@user-mc2rx7mp9d]

Hello, can I ask something? How about apple music dolbyatmos sound? Is it play on ps5?

[@DanielZH]

Hi, up until 2 months ago I tested no, even after the updates, there's still no information about it but when I tested it on PC Vs. PS5 it was different and PS5 did not use Dolby Atmos.

[@hypertrophy07]

Wow, great video! I mostly play Warzone in Call of Duty. Would you still recommend these settings for PS4 Sony Playstation Platinum Wireless Headset 7.1 Surround Sound? I am using them with my PS5.

[@DanielZH]

Hi, Yes, the audio processing all happens on PS5, so the headset model won't affect the output from the console.

[@hypertrophy07]

@@DanielZH Thank you so much brother!!!

[@hypertrophy07]

@@DanielZH I have VSS/3D Audio on my headset. Should that be on or off?

[@schumeliernst8060]

⁠ im Using Beyerdynamic MMX300 with soundcard SoundblasterX G6 optical is in the tv and hdmi in the PS5 what is the Best Setting for me now

[@DanielZH]

Hi, haven't had this setup! hope you find the best option for it

[@GotuUmraniya]

Apparently tempest 3d has more object based total sound range compared to dolby, better keep it on and games where 3d is not an option, keep it 5.1 or other surround settings it has and then there are games without any audio settings, in which keeping the 3d on will still make it better overall, still hope sony would add virtual surround features for headphones and dacs like creative soundblaster x g1/g6 which has discrete 5.1/7.1 channel surround potential but those dacs are usb based and anything plugged into ps5 via usb is turned into stereo, ps5 does not allow other devices to do audio process at all unless it is done via optical out or likely hdmi arc, even their own headsets like gold or platinum's VSS feature are not allowed on ps5

[@DanielZH]

Hi, yes the way I used to test headphones output but with 7.1CH was using an HDMI Sound Extractor because otherwise it'll output stereo and there's no way you can change that. another issue with PS5 is multi audio streaming, it can't output to headset and HDMI simultaneously, so when I want to use headphones but record gameplay in capture card, the audio will be off, only 1 output at a time which forces me to get audio monitoring devices for that propuse, very limited.

[@antoniojakovac5607]

Hey, I love your vids, keep them coming. As a noob in your area of expertise I'd like to ask you what is your advice for my situation. I have hyperx 7.1 headset but curently I am using Truthear Zero x Crinical IEM and I love them. My current setup for warzone 2 are Zero IEM connected via joystick and I am using stereo option with linear PCM. I am quite satisfied with it but I wanted to check with you if you have any advice to up my sound quality i game.

[@DanielZH]

Hi, Yes I'd recommend either Linear PCM or DTS (if the sound is laggy, issues, etc) when connected to the controller!

[@antoniojakovac5607]

@@DanielZH Thanks for the reply ❤️

[@usasupra23]

But, how do you setup the PS5 for folks who use HDMI from PS5 to Samsung TV and then the sound exits the TV via Optical cable and goes to a Bose Lifestyle system via Optical? Does it matter since the final processing is done in this case via the Bose? Bose seems to have either PCM or Dolby5.1 setting only

[@DanielZH]

Hi, which Bose Lifestyle system? it will decode the audio, not the encoding, if it only has Dolby 5.1 and not atmos use Dolby Audio with AV on the console set to 5.1ch and you're good to go > for TV settings ensure to use the same decoding (if it has) if it doesn't have Dolby than things get harder to setup (or passthrough if it has).

[@usasupra23]

@@DanielZH this unit is a Bose Lifestyle 535 Series 2 which might just be a V35 buff. Samsung HDR TV

[@TAIQ7]

I got a question. I had a sony gold headset on my ps4 and I could hear footsteps perfectly and know exactly where the enemy was in wz 1 and mw1. Now I got a steelseries 9 and ps5 and I suddenly can’t locate the enemy anymore. I can’t hear if the enemy is above me or under me anymore. To be clear I hear the footsteps loud and well but I just can’t locate it anymore especially not knowing if the enemy is under me or above me is quite irritating. I tried adjusting the EQ of the headset and turning off 3D audio etc but nothing get me that surround sound feeling of the ps4 and the cheap sony headset. Can you help me with this? Thanks in regards.

[@DanielZH]

As you copied the same question in 3 videos I pasted the same answer for you: every headset has a different kind of sound stage and response frequencies are dependent on the settings and if they provide a setting for that, and it also depends on your ear shape, so you may feel a headset sounds like things are around you while another feels like the sound is coming inside your head (for example Pulse 3D Vs Inzone H3 feel like that) and to me personally the ones that have a better sound stage and can feel like the sound is coming from an outside speaker are better to hear directions, I'm not sure about the models you mentioned as I didn't have any of those, but pay attention to sound stage and how it feels when testing or checking from Rtings .com they provide good info about this.

[@91locaso]

Can you do a review and settings for the inzone H9 thanks

[@DanielZH]

Hi, Inzone series can't apply and Transfer EQ for PS5 nor any EQ options, did they add EQ for them? I'm gonna cover the new Pulse series instead of Inzone.

[@lestade682]

Hi, is 3D Audio supported in my 1000XM4? What settings do you recommend for these headphones? Thanks

[@DanielZH]

Hi, yes, 3D audio is processed on the console, so any headphone can support it, I recommend Linear PCM for headphones and 3D Audio depending on the game, some games sound amazing with that some don't which we have a playlist of tested games and personal opinions here: kzbin.info/aero/PLfzrQ3H5ECSb94ScaAy57H8hX3FTqQQih

[@lestade682]

@@DanielZH Great, thank you, will check the list.

[@localeyemusic187]

Hey @DanielZH i have two front speekers (Dali Oberon 7) and a (Nad Amplifier C356BEE) Its connected to my LG c1 tv and ps5 with bluetooth. What is the best sound settings in ps5 for this setup? Linear PCM - 2 CH and av amplifier?? Or do you recomend another setup setting? Hope you can help me out with this🙏🏽🤞🏽 and thank you for all the awesome work you do for us gamers🙏🏽🙏🏽

[@DanielZH]

Hi, is it connected to TV by Bluetooth? isn't it better to connect with optical or HDMI eARC if it supports it for higher quality and lower latency? I would suggest av amplifier 2ch for this setup with linear PCM.

[@localeyemusic187]

@@DanielZH yeah my C1 is connected to my amplifier with a Bluetooth device😅 Argon something..a bluetooth box/connector😅 but your right i think i need to connect the tv with a optical or hdmi Earc instead🙏🏽👌🏽 - thank you for the settings help and fast respons mate🙏🏽😁

[@DanielZH]

@@localeyemusic187Correct, you need a connection that supports multichannel and dolby output, you're welcome!

[@witte2565]

Hey question is there a way i can conect my dolby 3d seround system on the ps5 ..on the ps4 i needed only 1 kabel

[@DanielZH]

Hi, PS5 doesn't have an Optical port, so you must use your TV optical out (if it has one), and that way you can get it. or HDMI ARC eARC if your sound system supports that input.

[@speeder1139]

Hello I have a question what would you recommend for competitive games like Apex, Rainbow 6, Hunt showdown?

[@DanielZH]

Hi, I'd recommend linear PCM for the least latency.

[@speeder1139]

@@DanielZH Thanks! I did have the right audio then. Lol

[@jordanhodges4757]

So I’ve recently switched to ps5 and i have the Astro a50s i have the adapter and I’ve followed the instructions to set it up and i can hear game and general audio but i can’t hear voice chat in game and not sure how to fix can you help ?

[@DanielZH]

Hi, have you tried changing Sound> Input Device > Selecting your headset adapter? if not, it'll use controller speakers.

[@zmr408]

Hi, Can you make a eq settings video for Astro A50 PlayStation version as I can’t find a perfect audio eq for FPS like warzone/mw2, rainbow six siege and apex legends.

[@DanielZH]

Hi, I need to test them myself, but for now you can send screenshot of EQ on Discord server and I try to figure it out by Rtings results.

[@zmr408]

@@DanielZHThank you for the reply. I don’t have any specific eq settings for Astro A50 that’s why I thought to ask you is that possible for you to create some eq for Astro A50 PlayStation version because when I try eq presets from online they are recommending to use Dolby access but PlayStation version of Astro A50 doesn’t support Dolby Access so if you can deep dive into some eq settings that will be greatly appreciated because I don’t see any videos on KZbin for the PlayStation version of Astro A50

[@fearsome1376]

Cool videos....just wondering what eq settings you would use for apex legends as footstep audio in that game is random

[@DanielZH]

Hi, I haven't checked that game for EQ settings, I'll look into it for future videos.

[@fearsome1376]

@@DanielZH a gent,thank you

[@JorisKeijser]

Hey, I have some questions. My setup is as follows: PS5 hooked up to hdmi 2.1 TV and a 5.1.2 Atmos soundbar (Q800C) hooked up to the tv with eARC, with the TV set to passthrough audio. So the audio signal from my PS5 goes straight from my ps5 to my 5.1.2 Atmos soundbar, and both 7.1/5.1 LPCM and Atmos are fully supported. I'm trying to decide on the best PS5 audio settings. I used to have it set to Atmos, which works perfectly. TV reports a DTHD signal coming in, passing it through by eARC, and the soundbar says it's receiving Atmos. However I am now wondering if I'm better off setting the PS5 to LPCM, because I see people talking about all kinds of bugs with different games when Atmos is enabled. I thought enabling Atmos would basically just give the PS5 access to all Atmos channels, and when a game doesn't use 3D audio, that it would simply send the plain default 5.1 or 7.1 signal within the Atmos container, and that there wouldn't be any difference between LPCM and Atmos in that case. Both DTHD and LPCM are lossless right? Could you tell me whether I should keep using Atmos or just choose LPCM? And as a follow up, when using LPCM, should I choose 5.1 or 7.1 for my 5.1.2 soundbar? Is it best to let the soundbar handle the downscaling of the additional 2 channels? Or should I let the PS5 handle this? I'm worried it might limit a game's audio capabilities in some way, and I was thinking that maybe the soundbar has some processing going on that allows it to still put the 7.1 channels to good use by adding an effect to it, to make it still kinda distinguishable even though it's coming through the 5.1 channels. And lastly, should I set the speaker positions to the actual positions of the soundbar in terms of degrees, or should I just leave it to default?

[@SamuelBurks-op3xw]

@@JorisKeijser you took the words from my mouth lol I desperately need a reply from op

[@JorisKeijser]

​@@SamuelBurks-op3xw Well, through my own testing and research I have come to the following conclusions: -The Soundbar and TV settings on the PS5 are the exact same audio signal, but these settings are reported to games, so that the in-game audio settings will (when a game has those settings) also be set to either the TV or Soundbar (or home cinema when AV receiver is chosen in the PS5 audio settings) audio profile. This often determines the dynamic range that's applied to the game's audio. When a game is set to TV for example, the dynamic range (difference between loudest and quietest) will be smaller than when set so something like home cinema. -The Soundbar and TV options will always output the maximum supported (reported by the device that's hooked up, the TV in my case) amount of channels. So in my case they will both output 7.1 channels, while the AV receiver setting lets you choose between 7.1, 5.1 and 2.0 yourself. When the AV Receiver option is also set to 7.1, there is no difference in audio signal compared to TV or Soundbar, which can be deduced by the fact that there is no short pause in the audio when switching between them. It doesn't actually switch to a different type of output signal so there is no short pause that signifies the switching that's happening. The pause/switch DOES happen when you set AV Reveicer to 5.1 and then switch between that and either TV or Soundbar. So in summary, TV, Soundbar, and AV Receiver 7.1 are all the exact same audio signal. AV Receiver 5.1 is different simply because it's 5.1 instead of 7.1. -My soundbar (Samsung Q800C) does in fact process the additional 2 surround channels on 7.1 vs 5.1 a little differently, so it does in fact offer a different/more complete surround sound than plain 5.1, even though it physically only has 5.1 channels to play through. -For some reason the Dolby Audio format on PS5 only outputs a Dolby Digital 5.1 signal for my setup, instead of Dolby Digital Plus 7.1. When selecting AV Receiver 7.1 and Dolby Audio, it only outputs 5.1. Switching the PS5 between 5.1 or 7.1 does not result in a pause in the audio, and both my Soundbar and TV just keep reporting they're receiving a Dolby Digital audio signal, instead of Dolby Digital Plus which would be needed for 7.1. This is trange as my setup definitely supports DD+ 7.1, but I have a feeling the PS5 simply doesn't support DD+, but only DD so only 5.1 when choosing Dolby Audio is your format on PS5. So, don't use it if you want 7.1. -The Dolby Atmos setting always outputs 7.1 (over Dolby TrueHD in my case), and can never be changed to 5.1, which is fine. -LPCM is also always 7.1, except when setting the PS5 to AV Receiver 5.1. -I have not been able to find out whether there is a difference in "speaker position" settings between any of the options, and I suspect that by default they all just use the default settings that are seen in the settings menu for the AV Receiver option. So I don't think there's any reason to let it influence your decision. -Dolby Atmos is only useful to choose when a game uses the Tempest 3D audio engine, which almost no game uses. This means there is not benefit to it compared to regular LPCM 7.1. I would recommend to not use it, as I've seen reports of bugs in terms of active channels and audio placement on wrong channels and such when a regular 7.1 game is converted to Dolby Atmos. Setting the PS5 to plain 7.1 will assure all games correctly output their audio without any bugs. In the end, for my setup, I have chosen to use Soundbar with LPCM. This outputs 7.1 LPCM. I could choose AV Receiver 7.1, but purely because I'm not 100% sure about the "speaker placement" thing, I'm going for the Soundbar option just in case the AV Receiver option deviates from any sort of unprocessed speaker placement setting and instead changes it to the exact default settings when choosing AV Receiver. It probably doesn't matter though. Then, in games, I just verify whether the audio settings are correct, and I preferrably have the game set to home cinema (or something similar). Additionally, which is very specific to my soundbar, 7.1 and 5.1 sound identical in the soundbar's "standard" mode, but when using "adaptive" the 7.1 audio sounds a lot worse, way more muffled, than when using "standard". With a 5.1 signal though, "adaptive" behaves as expected and adds a bit more clarity to things like voices. But standard is the way to go anyways, as it gives a more accurate and true surround sound. So, with the Q800C, don't use adaptive for 7.1, only for 5.1, but I recommend to use standard anyway. Hope this helps you, and if you have any questions I'd love to hear them!

[@SamuelBurks-op3xw]

@@JorisKeijser sorry for the late response here, but I really appreciate the in depth explanation & pros/cons. I screenshot this convo to have something to look back at in the future if necessary. I found an open box Samsung q750c for 220 bucks a few months back, I think that’s a steal?? Anyways , I would think that I could somewhat relate to your current setup that you have. I did hear that the Q900D is elite, but I just couldn’t bring myself to spend a rack.

[@fungerhord]

Thank you for the well made video. I've never gotten the PS5 3D audio to sound like anything other than muffled. I will try this 👍

[@DanielZH]

Hi, thanks, yes I'd prefer Stereo in 95%+ of the games, only returnal and deadspace are really good. nothing (in a stereo system) will sound like a real surround sound system.

[@fungerhord]

@@DanielZH I completely agree 👍 PCM stereo with a good DAC headphone amp and headphones has been my preference.

[@cipriandjbril]

what about soundbars ?

[@DanielZH]

if your soundbar supports Dolby Atmos or Dolby Audio Decoding, then you can use it, otherwise, Linear PCM may sound better, don't forget that even if your soundbar supports Dolby atmos, you still may get better results with linear PCM depending on the game you're playing.

[@cipriandjbril]

for example i have this soundbar samsung hw-q60b and the manufacturer saids it suports dts and dolby atmos so wich one you suggest using ?

[@DanielZH]

@@cipriandjbril I suggest trying both, as each soundbar may produce audio differently, try Dolby Atmos for 10 minutes then switch to DTS and see which sounds better, as the PS5 tempest 3D isn't good in all games.

[@z_evil666_9]

Hey dany which is the best headset con ps5 ?

[@DanielZH]

At which price range? in my opinion, the best is Audeze Maxwell for PlayStation, after that Arctis Nova 7P is a very good choice.

[@jcoop7]

If I use a astro mix amp and Astro a40s playing warzone would you recommend Dolby atmos? I’m currently on normal Dolby

[@DanielZH]

Hi, if you feel gun shots are way too loud, using Dolby Atmos (from what I tested) will compress them a little (in high frequencies) otherwise the Dolby Audio is fine, and linear PCM is also fine. there's not a huge difference for that.

[@jcoop7]

@@DanielZH I’ll give the Dolby atmos a go for a few weeks 👍🏼 on the mix amp do you know whether I should have the headphone or star on whilst using dolby atmos?

[@VerbalKint07203]

I was looking for an Astro A40 MixAmp question.

[@jean-francoisjoanisse1445]

Donc, moi qui ai un vieux ampli Dolby Digital avec un système 5.1... PS5 n'enverra pas le signal bitstream reconnaissable à 5.1? J'ai beau essayer les 3 settings, mon système reconnaît seulement un mix PCM Pro logic (oui, c'est une vieille machine...)

[@DanielZH]

vous avez essayé tous les formats (y compris DTS) et il ne peut envoyer du 5.1ch dans aucun d'entre eux ? si oui, alors il est peut-être temps de procéder à une mise à niveau car il se peut qu'il ne s'agisse pas d'un décodeur compatible avec la PS5.

[@illusv9498]

Hi can you give us a fix for the delay that the R2 has when pressed multiple times fast it start not register I noticed it very hard in the hero ashe from overwatch 2 when shooting without zooming down sight I thought it was my controller but i tried it at a friend house with 2 different controller and the issue is there This is a really big deal for online games I hope you touch on this subject ❤

[@DanielZH]

Hi, it's interesting I noticed the same thing last night I was trying to make a new setting video for Ashe! I'm working on it and will share the settings, for now, I recommend keeping the zone on 0-100 and trying zone 3 on the controller, this is the fastest way.

[@happyhoildays2010]

Can I use it in my soundbar that support Dolby Atoms

[@DanielZH]

Yes, if it doesn't have so much delay, you can use it!

[@IM_A_BLIND_KID]

Hi im currently using astro a40s wired headset connected to my PS5 dualsense edge controller..would you recommend linear PCM or DTS for the best audio quality available ?

[@DanielZH]

Hi, from the test I made controller audio quality is a bit low, they sound very similar (LPCM or DTS) but depending on your headset, DTS may sound better, I recommend trying both for 10 minutes and see which sounds better to you.

[@IM_A_BLIND_KID]

@@DanielZH thanks brother!

[@schumeliernst8060]

@@DanielZH im Using Beyerdynamic MMX300 with soundcard SoundblasterX G6 optical is in the tv and hdmi in the PS5 what is the Best Setting for me now

[@MatyCrads]

Hi, im getting Audeze Maxwell headset for my ps5, which is supposed to be the best headset u can get rn. My question is what will be the best settings on ps5 for this headset?

[@DanielZH]

Hi, both Audeze Maxwell and Nova Pro are great headphones for PS5, in terms of Audeze, since I haven't tested it, I can't be sure which format could be the best yet. I'm also planning to get one if the overpriced retails drop it a bit here.

[@MatyCrads]

@@DanielZH cant wait for ur vid about them in the future. I was wondering if I should use linear PCM or dolby audio as i dont have a hdmi 2.1 receiver for my ps5. I heard that u need that for linear PCM to keep 7 channel passthrough

[@DanielZH]

@@MatyCrads Yes, LPCM is probably the best option in most cases as I don't know any game that has a Native Dolby mix for headphones (in stereo) that would provide benefits but mostly in scripted parts.

[@MatyCrads]

@@DanielZH so its not a problem i have monitor with HDMI 2.0 thereflre the LCPM will downscale to 2 channels? Its still the best option on ps5 atm?

[@jayhunnel4375]

What’s best settings for turtle beach stealth 600 gen 2 headset?

[@DanielZH]

Hi, Linear PCM IMO. for any headset currently. 3D audio based on the game.

[@GeorgeBush12]

Hi what tv do you have lg c2? If yes kindly show us best game settings for ps5 also im feeling response time are slow...

[@DanielZH]

Hi, I have an LG C2, a Samsung TV and a Gigabyte Monitor. For response time, use "game optimizer"

[@GeorgeBush12]

Im using game optimiser even though i feel slow can you make video of lg c2 best settings for gaming mostly fc 24 and star wars Jedi Survivor

[@DanielZH]

@@GeorgeBush12 Well, I'll see if it's a good idea, as there's not much that I changed from the TV but color due to Rtings, Jedi Survivor has the highest input lag among all games for the controller though, FC 24 is only 60FPS and the input lag is again not as low as 120FPS games.

[@GeorgeBush12]

​@@DanielZHbro i really need your help i feel like my gameplay slow on fc 24 because of the overall tv performance and PlayStation. others games are absolutely better on lg c2 tv like jedi etc..but fc 24 and efootball 24 too slow talking about movement pass etc.. on this tv lg c2 i need your help for boost fps also gameplay kindly make overall video on lg c2 tv settings also PlayStation settings also fc 24 settings i need overall settings in one video to boost my gameplay also i tried 1080p 2k resolution on my tv it doesn't work still it shows 52fps 🥺🥺🥺🥺🥺😭 .. most of them having lg c2 tv on my side it may help them my friends also facing this issues...

[@yardman0001]

So ket me ask this question. I have an Avr setup with height speakers 5.1.2 fullybatmos capable and the latest hdmi 2.1 I currently uae the atmos setting on Ps5 but i xan also use lpcm and the use the AVR to upmix to Neural X or Dilby surround. Both of these would use the height speakers. Woukd thia be better than using the Atmos setting in the PS5??

[@DanielZH]

That sounds good, I would say decide by the game, most first-party games support all channels in both Linear PCM and Dolby Atmos, but some other games only support full channels in LPCM mode. so yeah it's kinda dependent on the game, the point of Dolby Atmos support was to provide Tempest 3D audio capabilities to Dolby Atmos devices. when there's not a Native or Good 3D Audio support on a game, then LPCM might be a better choice.

[@yardman0001]

@@DanielZH Thanks Daniel, will test and see.

[@Phoenix-zm5gv]

If i use tv what should i choose , i use lg c2

[@DanielZH]

Hi, linear PCM or DTS should be fine.

[@raymad8106]

Doesn't work on Sonos Arc. When you play Spider-man 2 it pops and all sound goes. it sounds fine with standard Dolby digital

[@DanielZH]

Hi, I'm releasing a video regarding Spiderman 2 in 10 minutes, if it sounds well with Dolby Audio than use that, there won't be SO much difference.

[@Jkills86]

Can you do a video of the best dac settings for warzone with the steelseries artics nova pro headset

[@DanielZH]

Hi, I'll look into it, I'm planning to get a new headset yet I'm not sure which model to get exactly.

[@Jkills86]

@@DanielZH I just researched the heck out of headsets and everything I read and watched on here and the web the number 1 gaming headset is the steel series artics nova pro so I went out and bought them I like them so far but they came with a game dac I guess it's like a external equalizer that has presets on it but you can also do custom and I don't know anything about that but let me know if you end up picking up this headset I bet it would be a popular video because it's 1 of the most popular headsets out there

[@GenesisX3]

So I got in this video because I am trying to solve an issue on Livestreaming through PS4/PS5, which is for some reason the Voice audio from NPCs/Characters has an echo (they are doubled) you can only hear if you are watching the stream, and here I though if PCM Linear, DTS, Dolby Atmos or Dolby has something to do with that problem? or its a Playstation problem itself with their livestream system.

[@DanielZH]

Hi, do you stream directly from PS5? I must test, because I've never done that and need to check stream settings.

[@GenesisX3]

@@DanielZH Yes, directly from PS4/PS5 (it happens with both system), using a headset connected to the controller, and on Twitch.

[@66675l]

Yo, do you have any video about a30 eq for footsteps?

[@DanielZH]

Hi, I do not, but you can send a screenshot of the app on discord server and I can help you there if the headset is reviewed by Rtings which it is.

[@finn_hughmehh10]

Do you know if you have any recommended EQ settings for Fortnite?

[@DanielZH]

Hi, I would use Neutral EQ as general, but I haven't tested Fortnite recently.

[@endereser2311]

I need best settings for logitech g pro x wireless for ps5 plssss

[@DanielZH]

Hi, in most headphones cases I tested (Not yours) Linear PCM works the best.

[@jojobigb1671]

Hello ! Is it possible to play on my PC with 0 latency at 120hz with the PS5 and use the DS4 as I see in a video? ❤

[@DanielZH]

Hi, No, unfortunately, the PS Remote play (a method to use for DS4) has input delay even on a 1Gbps LAN. it's useless for online games, but maybe good for story games.

[@jojobigb1671]

@@DanielZH ok super thank you very much for your response!! moreover sintu touches well ds4 a profile well pushed interest me very well why not make a tutorial of it. but thank you very much for all your advice!!

[@DanielZH]

@@jojobigb1671 I'll be doing DS4 and DSX tutorials for Edge in near Future!

[@triplekxi_tk6047]

Any ideas for an astro a50 besides what astro says on their site?

[@DanielZH]

I don't have this headset so I have no idea, but I think there are reviews and set up for that on KZbin.

[@triplekxi_tk6047]

@@DanielZH Aight, thanks for the reply

[@michaelschneider1365]

is this good for tv speakers set up.

[@DanielZH]

It depends on the TV, in most cases, it won't make a huge difference unless the TV is designed with a multi-speaker setup and Dolby decoding.

[@ultrapredatorr]

You never disappoint

[@DanielZH]

Thanks sir

[@localeyemusic187]

​​@@DanielZHHey Daniel i have two front speekers (Dali Oberon 7) and a (Nad Amplifier C356BEE) Its connected to my LG c1 tv and ps5 with bluetooth. What is the best sound settings in ps5 for this setup? Linear PCM - 2 CH and av amplifier?... Or do you recomend another setup setting for best sound? Dolby audio or atmos on instead maby? Hope you can help me out with this🙏🏽🤞🏽 and thank you for all the awesome work you do for us gamers🙏🏽🙏🏽

[@XXXdemon45XX360]

Guys I need help. So I have my headphones (Astro a50 gen4) opitc cable plug into the tv and usb connected back on ps5. Now says I have to use dolby audio for it and cab I still use 3D audio? Or Do I need put on stereo? Also I don't use the dolby logo button, just use the star logo button.

[@DanielZH]

Hi, what is your output mode for TV? when you use Dolby, the tempest 3D Audio is applied as Dolby Format, you don't need the 3D Audio option anymore.

[@XXXdemon45XX360]

@DanielZH My output device is a USB Headset (Astro A50), which is what it says on the ps5 system. Is that what you are looking for?

[@user-fs5vg1zl6q]

Where is the EQ Presets screen on PS5? I don't see an option to get into that screen on PS5?

[@DanielZH]

Hi, that is only available for Pulse 3D Headset.

[@derekshackle8780]

I was confused about this too. EQ priestess are in the sounds settings at the bottom of the screen

[@RaWCypher]

Dude said “Footasteps” lmao

[@DanielZH]

Well, Eng. isn't my native language. but it's good to see it makes you happy.

[@multimillionki]

Hi, i've found a couple of videos i've seen so far from your channel to be good. So, i've subscribed! I have a concern about Dolby Atmos. I recently bought a LG Posé TV (55LX1QPSA) which has such audio quality, but when i choose it in the PS5 system, it drops the sound quite a bit compared to PCM Lineal. Do you know why it happens? It's worth mentioning that as soon as i noticed the difference, i immediately switched it back to PCM Lineal. Without having tested Dolby Atmos inside a game.

[@DanielZH]

Hi, thanks for the sub, I'm unsure about your TV settings, have you checked and ensured the audio from HDMI decoding is set to Dolby Atmos? + Remember not every game sounds good + I'd still recommend Linear PCM for TVs with 3D Audio Off.

[@Fabio-ql5yf]

Will you do a review of the new Pulse Elite headset when it releases? I have the normal pulse and I literally can’t wait for the Elite, since the normal one already sounds amazing. Hope we’ll get a release date soon.

[@DanielZH]

Hi, Yes I will! I'm already saving for that one, hope it's not too expensive, and yes, that will be a much better choice over Pulse 3D if that supports EQ too. hopefully, sony provides a better neutral sound by default as they talked about it already.

[@gw2752]

Hi, will atmos be better than dolby for me? I use astro a40's gen 2 with the mixamp optical is used for the audio and mic is through usb. Thanks

[@DanielZH]

Hi, I recommend Linear PCM for your headset, Dolby Audio seems to be outputting the same 3D Audio, Atmos is a bit quiet on the headset and the frequencies don't sound correct on the headset (if that matters to you), however, I should also test the audio delay to give a final decision, the most important thing is to have low delay for gaming.

[@gw2752]

I use hdmi 3 on my Q80T Samsung for arc, the hidmi cable goes to my arc extractor and I run optical out to the back of the extractor to the TR mixamp. I currently select the dolby setting on my PS5 should I switch to linear PCM? Thanks

[@DanielZH]

​@@gw2752 Hello again, have you tested a direct USB connection to PS5? I guess, this way that you're using it will add a noticeable delay, I don't have the mix amp to test but I'm guessing there's a delay on your TV with Optical over arc with Dolby, of course I must test the delay on PS5 first, then I give you a recommendation, still, PCM typically should have a less delay. but let's wait a little longer until I test it. if you set to LPCM set the TV to that too.

[@gw2752]

Hi, the mixamp is connected to the PS5 via usb, PS5 set to dolby and voice chat only as the sound goes to the mixamp via the optical cable to the back of the mix amp, that way I can use the audio / chat balance on the mix amp and the mic ru s through the moxamp usb to the PS5. There is no delay. Thanks :)

[@gw2752]

There is delay if I run the optical straight from the back of the tv to the mix amp that's when I use hadmi arc adapter as it passes through with no delay :)

[@damesdamo]

Great video. Entertaining content so had to sub! Can you plz do a video testing out the astro a40tr on warzone at 1440p & 120hz? Find the best audio settings from dolby audio, atmos and pc. Astro says to use dolby audio but playstation has recently added atmos so it could be better maybe 😊

[@DanielZH]

Hi, thanks, I'll look into it, I plan to support more headphones and settings, but there are a lot of models people ask for so I'm not sure which to get first and they're not cheap!

[@gabstr]

@damesdamo Hi, how do you use astro a40 with 1440p 120hz? I use a 1440p 144hz with two hdmi 2.0 cable and the ps5 have a limit to 1080p 120hz Sorry for my bad english anyway

[@damesdamo]

@gabstr You need a hdmi audio extractor to use the a40tr at 1440p 120hz, I will send the link below. It's what I use for my astros to work at 1440p 120hz

[@gabstr]

@@damesdamo Sorry, i can’t see the link Please, can you send it?

[@bele8142]

For the audio format priority do I use Dolby audio or Dolby atmos?

[@GotuUmraniya]

in the end basically it depends on how developers are developed game's audio, just like lazy developers not utilizing all controller features to it's full extent, i guess only first games can be expected to provide proper audio visual and controller potential on the console

[@DanielZH]

Hi, yes it needs good development, not even all first-party games are good in that case, let's take GOW Ragnarok as an example Vs Reternal.

[@GotuUmraniya]

Upon further inspection i did yesterday, dolby dts etc only matters for optical out which while ps5 lacks your tv may have it, also it would matter for hdmi arc, not for wired or wireless headsets, and regarding 3d audio, i think it should be kept on at all times, i noticed the difference yesterday with worbidden west, with it off the leaves would not make any noise and with it on the nearby leaves would make noise@@DanielZH

[@gorambo]

Hi this is the first time I am viewing your channel could I add some critique, I would like to see a shorter video with less information simpler, you've given me to much and as a result have left me a little confused. What you could do is say here is my COD audio settings step 1,2,3, try them and let me know in the comments what you think. These are just my thoughts.

[@DanielZH]

Hi, thanks a lot for the critiques, this video is mainly for all audio settings, in that regard, I have a short video for call of duty settings here, I'd be happy to know what you think about that: kzbin.info/www/bejne/fn62qKOel9aci5I

[@Phoenix-zm5gv]

Hi Daniel if i use tv speakers and linear PCM is it okey if i use ai sound pro or for using ai sound pro i should switch on dolby atmos? Thanks.

[@DanielZH]

Hi, is that an option on your TV? doesn't it cause a delay to audio? does it sound better with that?

[@Phoenix-zm5gv]

@@DanielZH i thinks so , it gives like.3d effect on audio

[@Phoenix-zm5gv]

@@DanielZH if i want to use ai pro , should i use linear pcm?

[@DanielZH]

Yes you can use linear pcm, if the TV supports Dolby Atmos as input and decoding, then you can try that too.

[@Phoenix-zm5gv]

@@DanielZH Hi Daniel sorry for asking too many questions but i have the same tv as you LG C2 , what are your sound recommendations for ai sound pro PS5.

[@Blitzzz0101]

I can't find eq Presets settings can u please help 😭 ?

[@DanielZH]

Hi, it only works with pulse 3D in wireless mode.

[@danielruiz949]

Tried dolby atmos playing cyberpunk 2077 with a LG soundbar (dolby atmos capable) and the sound is outstanding… but the delay is too much, it brokes lip sync, i had to go back to linear pcm 😢

[@DanielZH]

Wow, Thanks for sharing the info, I'll test the encoding delay soon.

[@SCBodyboarder83]

Yeah I had the exact same problem with with my Dolby Atmos Samsung soundbar. Sound was way out of sync.

[@trc1508]

I also have a Samsung Dolby Atmos soundbar along with two surround speakers and noticed when using Dolby Atmos, the sound will disconnect for a second around every 20 minutes or so and then reconnects again, anyone else have this problem?

[@SCBodyboarder83]

@@trc1508 I just use linear PCM and and Q symphony when playing games now and don't have any syncing issues or dropouts.

[@trc1508]

@@SCBodyboarder83 does PCM support 5.1 I thought it was only 2.0

[@sabrcaptainprice8590]

Good video

[@DanielZH]

Thanks

[@michelhernandes1262]

Em uma Tv oled qual modo de som no ps5 devo usar pra ficar com o melhor som?

[@DanielZH]

Hi, if your TV supports Dolby, if not, Linear PCM. try both and in some TV speakers Linear PCM is better than Dolby.

[@michelhernandes1262]

@@DanielZH obrigado 🙏🏼

[@5324TuiG]

The sound of any game will be distorted when I switch it to Dolby after the update . I am using a Samsung q90r soundbar

[@DanielZH]

Does it happen for all games? which games did you try?

[@5324TuiG]

@@DanielZH the last of us remastered, gta online, ghost of Tsushima… if I watch a movie on my ps5 the sound is perfect, it is just the new Dolby audio setting for games update that doesn’t work . I tried to switch the settings of the port on my a90j from Vrr to enhanced but doesn’t change anything

[@DanielZH]

@@5324TuiGI see, then it's probably not an issue from the games, I'm not sure what could be the issue though because there are a lot of things in this matter but will let you know if I find more info.

[@5324TuiG]

@@DanielZH I actually have to restart the ps5 all together, after that it’s ok. Maybe it’s the q90r soundbar?

[@DanielZH]

@@5324TuiG Oh I see, maybe its a software problem now but not sure if the soundbar is the issue. PS5 also had disconnection issues after rest mode with Pulse Explore and it needed full restart, maybe that's something with PS5, I'm not sure though.

[@GZBADAZZ]

Very good video, I didn’t even finished. Very advanced.

[@DanielZH]

Glad you enjoyed it!

[@dannywelbz3650]

Thanks for the work man , just a quick question regarding using the PS5 party chat when playing wz2 using the pulse 3d , does it make a difference with how sound is processed ?

[@DanielZH]

Hi, if you mean the headset microphone, no, the quality is the same, but the audio bitrate is lower in games (usually) so it may sound better when you're on a PS5 party chat or Discord voice channel compared to a game.

[@darealestwon]

So much in this video is just wrong. Dolby has very specific guidelines for where you should place your speakers. That speaker flexibility placement he talked about is completely false. Not to mention dts is not a more compressed format of dts. Regular drs surrounds compressed, but it’s just as different from pcm as Dolby digital is.

[@DanielZH]

Thanks, yes some of the information in this video is not correct and I expanded my studies for future videos.

[@zenphy1995]

Best ps5 audio still comes from using an optical cable, no? I have a steelseries arctis pro w gamedac, connected to a hdmi splitter with optical cable. This audio is by far superior to using usb output with the ps5. Why dont you talk about this option more?

[@DanielZH]

Hi, we were talking about the main options from the console, but if you use a good splitter that supports 7.1ch out of Optical you would get high-quality audio the same with HDMI 2.1 sound extractors.

[@zenphy1995]

@@DanielZH thanks for the quick reply! I am using a 120hz hdmi splitter from astro, it’s very good! I should use dolby audio over linear pcm right? I can adjust the EQ settings on my gamedac instead of the ps5

[@DanielZH]

@@zenphy1995 I recommend trying both, because some games (like COD) may sound better for footsteps when using linear PCM compared to Dolby. currently, Dolby is a conversion of Tempest 3D for decoders.

[@zenphy1995]

@@DanielZH i see, but isn’t linear stereo sound? While dolby is surround sound? That is if your headset supports 5.1surround sound?

[@TheSiNrEi]

Can you please explain me about a difference between optical and USB output conecting? I have a Arctis pro wireless headset and before I use it for my ps4 pro conetcting with optical cable, now for ps5 I use USB output conecting, heard that it is better to use an optical cabel, but why shoud sound difference? Steel series company in the official video recomended USB output conecting, no words about optic. Can anyone explainm me what a difference? Thank you!