Full Review 5.12kwh Powerwall from Orient Power!

[@christophermusgrave3105]

I just want to say I really enjoy our videos. They are very informative and I have learned a great deal. Also I enjoy the productions...as in the fun stuff you integrate. I am hoping to eventually have a system that will run most everything in my 2000 SQ ft. House ( in power saving mode) for 2-3 days in a grid down solar minimum (rain/clouds) and full w/solar charge in sunny conditions 4-5 hours.

[@AveRage_Joe]

Thanks Man! Appreciate that!!! I am in the same process. You going total Diy or Prebuilt batteries? I may need to get some trees trimmed or dropped to utilize solar more. I dont get sun on my panels until NOON!!😆😬🤘

[@SuperBrainAK]

🚨Cell #15 is weak! 🚨 It was the highest cell while charging AND the lowest cell when discharging. It isn't just not balanced (meaning not the same charge state) it has a lower capacity than the rest. I think you need to contact the maufacturer to get a replacement cell or thoroughly check the terminals for tightness or dirtyness.

[@AveRage_Joe]

True but we did test over the 100ah claim. I could pull the cell for the heck of it and test?

[@SuperBrainAK]

@@AveRage_Joe well it would be about 103Ah like the test showed but if you tested all the other cells they would read more than 103Ah because the lowest capacity cell determines the capacity of the battery because they are all in series with the same amount of amps going through each cell. Probably not worth doing anything with the cell but it is a good think to keep an eye on if it gets any worse.

[@aspendell209]

The box clearly said Lithium Ion, but the cells are clearly Not. There are 2 reasons a company does this: Either they don't know what they are selling, or they are trying to deceive their customers. Lithium Ion batteries typically sell for at least 50% more, due to lighter weight, increased efficiency, and smaller footprint. In DIY we test each cell and create a pack with matched charge/discharge curve cells. The best name brand portable power station companies do this as well. These ones weren't even close to matched judging by the huge voltage discrepancies that you displayed at the top and bottom of the curve. Good video Joe, thanx.

[@AveRage_Joe]

Yeah it does say Lithium Ion which I to thought was odd but I just read on google it says LiFePO4 batteries fall under the transportation guidelines for lithium-ion and are handled in a similar way so have to be marked UN # (3480 or 3481). I could be wrong tho...its the interwebs 😆

[@herbertvonsauerkrautunterh2513]

Rebranded jakiper.. not bad. I bought the server rack version. It seems that jakiper batteries don't get properly top balanced before the get put together. I'll more than likely fit an active balancer with an on/off switch to each of the two batteries i have

[@TheNerdy1]

Fantastic review of the battery! I have to say the packaging seems really good considering it fell down your stairs and you couldn't even tell. Thanks for the real world testing!

[@AveRage_Joe]

Thanks for watching! Its a legit solid battery for sure!💥🤘

[@powerwall]

Durable test...Tested!>Pass

[@quake101]

It's hard to tell from the video but, I don't think there is foam in-between the cells in the center. Good review, this style of case looks nice.

[@chuxxsss]

I so love your safe demo at the start.

[@powerwall]

Mee too.

[@WiSeNhEiMeR-1369]

HOWdy A-J, Thanks for the REVIEW COOP ...

[@AveRage_Joe]

Thanks Man! Pretty sweet battery!💥🤘

[@korishan]

You could always make an Anderson pigtail splitter connector so you can connect two UPS units to the same battery and you'd be able to pull higher amp discharges 😉 I know you have access to loads of Anderson connectors. Just need to get some lugs or just butt-splice them together

[@mrgruisinge]

Very nice looking battery. However I am off grid and pretty doesn't do much where capacity is concerned. I still think the Signature Solar Lifepower4 batteries are a better value. A rack mount is more compact. With the discount a few of these would be a pretty good buy. The fact that it will work with a lot of inverters is a big plus too.

[@AveRage_Joe]

TRU TRU pretty doesnt count for capacity lol. I havent had the chance to test SS rack battery yet. I personally like the wall mount batteries these days. Nice and neat, clean and out of the way. I will say a Pro for the rack is less wiring since you connect to a buss bar right there. Yeah a huge plus on this is the discounts and the sale right meow with free shipping.💥🤘

[@stans5270]

Average Joe - We're going to test out everything about this battery... First up a drop test... 🤣🤣

[@powerwall]

🤣🤣

[@AveRage_Joe]

LOL...that part was fake but maybe it SHOULD be in the normal Testssssss!!!!!! If it cant survive in the package drop test, not interested😏😄

[@patrickmckowen2999]

Great review 👍 Nice to see someone showing manufacturers software. Cheers

[@AveRage_Joe]

Thanks Man and Thanks for watching!🤘

[@butchwilliams7637]

Very nicely built. It even survived the crash. Good job

[@AveRage_Joe]

Yeah its pretty nice and built well!💥🤘

[@rich3317]

I watch a few different KZbinrs. You are one of the best. I retired 3 years ago in Ukraine. I am a big fan of solar. I been wanting to buy a battery like this for a long time. Ukraine custom fee are really stupid. But because of war they have cancelled all import fees. 😊 So after watching your video I bought 10 of these. I really like SOK a lot. But there prices were just to much for me. I used your 10% discount code. Wow. 10 of the server rack batteries. $13,500. One of the reasons I am texting you is about top balancing battery. I plan on setting battery cut off at top 80% low shutoff 20%. Will they balance them self over a few weeks? Or months?

[@AveRage_Joe]

Well Thank You!!! I Appreciate that! Nice! 10 is CRAZY! So what I would do is charge them all up FULLY to let them balance out. The voltage needs to be higher to reach/activate the balancing of the bms. Its hard to say how long it would take since every battery is slightly diff. Honestly, after you charge them for the first time.....Id just start using them. They will balance over time and since you have 10, you have time. Great buy and thats great that you dont have to pay extra duty taxes......I hate taxes!😄 If you encountet any issues or have question, dont hesitate to ask💥🤘

[@rich3317]

@@AveRage_Joe Thanks Joe. I will may need a little help if my installer has trouble.

[@AveRage_Joe]

No problem, just shoot me a msg. I havent seen my code used yet. When did you purchase if you mimd me asking?

[@rich3317]

@@AveRage_Joe February 25, 2023. Your discount code only works if you buy 4 or more.

[@rich3317]

Joe can I get a email?

[@iowac]

7:04 - Lift and toot tested yep it passed the ITS HEAVY test and toot test.. lol If you will lift it you shall toot

[@powerwall]

We will start to advertise our battery as heavy duty battery..................

[@mds6860]

Excellent video, thank younfor producing.

[@AveRage_Joe]

Thanks for Watching!

[@panospapadimitriou3498]

the part of balancing might be due to fast charge discharge and cells wont have time to cooperate with bms but could be a bad connection or a torque difference due to transportation if its servicable......

[@CoquiAudio]

I like when he adds sound effects 🤣

[@AveRage_Joe]

Only way we do it!!!😆💥🤘

[@jasonflt]

now that your home and you know a package is on it's way. its the worst waiting for it to show up lol

[@AveRage_Joe]

🤣🤣100%🤣🤣

[@teseract]

Bought one today, free shipping for the next few days. With the promo code and sale it was $1503 out the door for me.

[@AveRage_Joe]

Nice!!!😲💥🤘

[@teseract]

@@AveRage_Joe Add in the cost of a 1 ton chain hoist and lifting strap to that total if you're too weak to lift 110lb on to the wall solo. ;)

[@AveRage_Joe]

Lol 100%😆😆💪

[@bfsmit1959]

Hey Joe, just bought the unit. Can you inform me what charger set-up you use? Looking for an affordable one diy build. Thx in advance.

[@powerwall]

Grid or solar charger?

[@seantn1357]

Awesome review Joe. It looks like a tank. I see that you have all kinds of batteries (Orient, BigBattery, LifePO4, 18650). Are you addicted to the batteries or something?

[@AveRage_Joe]

Whoooo Meeeeee???🤣🤣🤣💥🤘

[@MarkSmith-Uzor]

Lol excellent drop down the stairs!!! I didn't see that coming!!! Lol

[@mawamatakama5150]

Joe Teach me your awesome ninja skills! *_watches box being dropped_* Uhhh... nevermind.

[@AveRage_Joe]

🤣🤣🤣🤣🤣🤣💥🤘

[@powerwall]

😀😀

[@RJ-cc1fz]

Good review bud. I really thought the battery was going to go BOOM when you showed it falling down the steps!

[@powerwall]

It will not.

[@chucktrotter9699]

10.25.22 Very good video Joe excellent. Thanks for tanking the time to make it. Question: would you happen to know if there is a 24v like the 48v?

[@AveRage_Joe]

Thanks Man! I am not aware of a 24v at least at this time.

[@stephenmcnulty7096]

Good to see you making video's!!!!!

[@AveRage_Joe]

Thanks!!! Love making them!!💥🤘

[@DanBurgaud]

7:05 ... did you just farted trying to lift it up? 😆😆😆😆😅😅😅😅😅😅🤣🤣🤣🤣🤣

[@AveRage_Joe]

🤭😉🤫😜

[@offgridwanabe]

Thanks AJ looks like a good lithium Ion battery.

[@powerwall]

Thanks

[@AveRage_Joe]

Awesome LiFePO4!💥🤘

[@offgridwanabe]

@@AveRage_Joe Ya Lifepo4 is the best Lithium Ion chemistry for home use.

[@liondecour4567]

Pace BMS i will try to use in my DIY

[@garfieldlawrence3353]

I love that battery

[@AveRage_Joe]

Its a sweet battery my man!🤘

[@spiro6363]

Why does this look like a Seplos battery, lol Great video and very helpful, I like the wall mounting idea too, I especially like the the fact you can download the software directly from their site, I assume comes with some instruction on the use. Many thanks

[@AveRage_Joe]

Yeah I guess they do. They also look like all the server rack batteries too.

[@Roll2Videos]

Very nice Joe!

[@AveRage_Joe]

Thanks Mate!!!!💥🤘

[@clarencewiles963]

You’re able to use it on a Titan. As I watch on Minute Man Prep. He use a standard battery. Not the Titan product.

[@AveRage_Joe]

Ill have to take a LOOKC!!

[@t3angling575]

Awesome video, great production. I am learning video editing and can only hope to someday get close to this level of video. Awesome and really enjoy it. The battery drop downstairs is classic. On a serious note, I am totally a newb when it comes to power, electric, battery ratings, numbers, all that jazz. So, when you stated the $$$ per kWh, I don't understand why anyone would go this route for power. Meaning my current electric providers rate is $0.10.4 cents per kWh. Paying for a system that produces a kWh of power at $300 plus rate is mind boggling to me. Again, I already admitted to being a newb, but can you help me understand, as I am sure I am missing something... Thanks much!

[@AveRage_Joe]

Thanks and Appreciate that. So to kinda bring it all down to a few words. Many want or need a backup system to keep the power on when the grid goes down for whatever reason. A storm, blackouts, California fires the utility company just turns off everyones power, idiot drives into a utility pole....the list can go on. People want to start being more independant and others its a hobbie. Yes batteries are one of the pricy items in the system for sure BUT it sure is nice to have power(fridge, tv, lights) when the neighbors dont🤠✌️

[@t3angling575]

@@AveRage_Joe so strictly from a $$ standpoint, Solar is more expensive than grid power, would that be a fair statement? I totally get the rest of your points. I have all but decided to go with Orient after watching your videos. I live in an HOA, do not want panels on my roof, so big battery storage $$ is what I am leaning towards, and charging with a generator. If I decide to relocate I will ensure I get a little acreage to install panels. We cannot do net metering here so that is not an issue. I am mainly looking to get as much as possible off grid power as I can, probably not HVAC, dryer, etc. but between natural gas and a couple batteries and an inverter, I should be able to cut into the power bill substantially. My hope anyway. Thank you. I have been asking everyone to answer the question about kWh pricing compared to grid power. Appreciate it.

[@AveRage_Joe]

@t3angling575 Yeah solar power is expensive but your replacing the grid. Depending on your power needs, you can run damn near all your house minus the big items like stove, AC and dryer with 10-15kwh of battery. At least we can here at my house. If you get board, watch my bigbattery.com videos. There long but I show all the things you can power and for how long. In an emergency you could even set out portable fold out solar or even get some used panels. All my solar panels are used from santan solar. I purchased 21 panels (5.8kw) for around $1200 shipped to my door. Not saying you have to get that many but throwing a few out will help save some gas on the genny.

[@t3angling575]

@@AveRage_Joe awesome man. I truly appreciate you, I think being the only one willing to state that it is expensive, and more so than grid. I was thinking my math had to be off somewhere, again THANK YOU very much. Your videos on all in one units, and yes Big Battery (holy cow those are BIG assed batteries) is what I will be using. I am also going to use you Ultimate Power hand truck video to build a system for camping trailer build. You hit the main point with solar, interesting, fun to learn and to tinker with, and absolutely get away from further enriching power companies who never or seemingly never upgrade grids, resulting in more outages. I agree for all the reasons, now can start getting units and batteries together for the build. Thank you again very much for your honesty and awesome videoed. Ya da man BOOOOOOOM!

[@tiloalo]

The handles seem to be in the wrong orientation. Nice looking battery for a super price nonetheless 👌

[@capecoaster69]

Great review !

[@AveRage_Joe]

Thanks Mate!!💥🤘

[@carlossantini]

Thx u for the video. Can this battery do closed conection with Sol-Ark or Victron?

[@AveRage_Joe]

Thanks! Yeah it can communicate with sol-ark according to there website! I didnt see victron.

[@mwint1982]

Test everything...including the styrofoam 💪

[@AveRage_Joe]

🤣🤣💪💪

[@John-B91]

Hi Joe that was a great video exactly what I want to do for a power backup. Can you tell me the make and model of the UPS you are using.. I am looking for an Online 2 or 3 kVA model that has an external battery connection so I can use a 48 Volt battery. Just need to find the price of one of the Orient Power batteries in Australia.

[@AveRage_Joe]

I was using an apc 3000xl for an inverter for the longest time. Used it 24/7 and never a problem. I picked them up from an ewaste recycler here in town. The one in this vid wasnt the xl version but just about the same. Im pretty sure Au has a supplier for the batteries as well!

[@jadialicea]

Excent video. Just one question, how you monitoring from your cellphone? I think app needed for that? Can you help me with that? Thanks.

[@AveRage_Joe]

Thanks for watching. There is an app and I think I forgot to show it🤦‍♂️

[@nikkion2140]

Can I use this power wall for a cabin in UK? We have our appliances run on 220/240 volts. Thanks. God Bless.

[@SHUB_MetalZone]

nice review, looks like a solid product, well designed and well made... 16:46 your 🐱like to gambling with his life 😅

[@powerwall]

Thanks for your comment. You win a 10% off...

[@michaelcoghlan9124]

Thank you very helpful.

[@AveRage_Joe]

Thanks for watching!

[@shanepipkin4041]

this might be a stupid question but If you want solar panels and a battery do you hook into your breaker box? and can you name best to worst battery banks? to me I would want the best and longest lasting

[@AveRage_Joe]

You would connect the battery and solar to an inverter. Then inverter to breaker box with the mains shut off

[@stevedutcher3875]

Great video!!

[@AveRage_Joe]

Thanks Man!!!💥🤘

[@peterandrasszabo8062]

Thanks for the deep test, good job. IMO it is absolutely not acceptible (not good -:)), that the BMS lets the cell voltage over 3.65V.

[@AveRage_Joe]

Thanks Mate! I think it depends on the cells used. Razor cells can go to 3.8v😲😆💥🤘

[@oneshot_onekill4618]

I just received my SunGold 48V powerwall and it does not come with a Fuse and was the same price as Orient powerwall. I wish i known that.

[@AveRage_Joe]

Id have to take a look at the sungold powerwall and see how they compare. Does it at least have a breaker?

[@oneshot_onekill4618]

@@AveRage_Joe I have to check internally but i dont see one externally or in the manual.

[@jeremyallard5652]

Great Video Joe I love that battery if they ship to Brasil I might buy them subject to freight forwarders cost and import duty rates

[@AveRage_Joe]

Thanks man! I think they do ship to Brasil! I cant say what import duties ect would be since im in the US. May be worth a look!

[@jeremyallard5652]

@@AveRage_Joe Thanks Joe I will give them a shout by email. Good luck with your other battery build out of interest are you following Ray build’s cool stuff take care

[@jeremyallard5652]

Hi Joe are you at will to share the email address for a sales contact at Orient power I have four AC Units that I think will require soft starters in order to do away with inrush currents.

[@AgentOffice]

What's a good grid tie inverter for it

[@fryske.tynster]

i thought sponsored video,.s need to list the amounts they got for it well waiting on that part i guess

[@Wrenchen-with-Darren]

Great video thanks 👍👍

[@AveRage_Joe]

Thanks Man!!💥🤘

[@nikkion2140]

Hi. Excellent video. Thanks.

[@AveRage_Joe]

Thanks for Watching!😄💥

[@TheBomo]

AveRage Hobo 🧤 💥💥

[@AveRage_Joe]

Thats Meee!🤣💥🤘

[@tiborchren]

Hi, awesome review, I'm starting to like this battery more and more. I would like to ask if it would be possible to use the battery in an upside-down position for a small portable solar system. (For example, on the hand truck) This battery would be placed at the bottom and above it All-In-One Inverter. This battery would be rotated by rotated 180degree under All-In-One inverter. Rotated 180degree, because the connections between the All-In-One inverter and the Rotated battery they would be nice close to each other this way. Probably this should be possible as the battery cells are solidly secured position inside, but then is it possible to rotate the LCD display 180degree in it as well? I'm not asking for a rear mount this, can definitely be sorted out, there's plenty of steel there. Thank you for your answer, best regards. Tibor (Czech Republic)

[@AveRage_Joe]

Thanks Mate!! It really is a great battery! I honestly dont see why you couldnt mount it that way BUT I will find out. It should still sit on the factory mount just fine. I was thinking of doing the same type of build but battery right side up with "longer" wires. For the screen, Ill take the top back off and see if it can be rotated.

[@AveRage_Joe]

Battery CAN be mounted upside down btw. No issue there! I still need see about screen.

[@zachary261]

I need to pick your brain on this one. I have three powerwalls similar to your Orient Power connected in parallel. One day, I noticed that the master powerwall's state of charge was lagging behind the other two powerwalls by 15%. So, I switched off the two powerwalls and I managed to have the master powerwall catch up by charging it in isolation through the same solar system. What if the powerwall that was lagging behind was not the master powerwall, can I switch off the other two and charge the lagging powerwall in isolation? Or will this not work because I need to have the master powerwall on at all times when the powerwalls are parallel-connected?

[@AveRage_Joe]

Hmmmm, I actually dont have a proper answer on that because I have not had that issue(I also dont have 3 to parallel). However, I would also say that there are minor differences between ALL batteries, wires, bms's, electrical components ect.... so 15% may seem like a lot but might noy actually be. I only say that from paralleling other batteries together and notice the voltage being the same but SOC shows much different. Here is a question, if you leave them all connected, will the master ever catch up? Mine usually do because once battery is full the house or loads run from solar and the batteries have time to "equalize" with each other. Will yours do that?

[@zachary261]

@@AveRage_Joe They all equalize at 100% and discharge unequally. I noticed that one "powerwall" seems to stay asleep at 100% (when they're all fully charged) for quite a while when sunset comes and it's time to discharge. I've had to switch of the other two "powerwalls" to force discharge on the sleeping one. I wonder if things will just work out if I leave it alone. Thanks anyway.

[@stevedutcher3875]

Our you going to manually top balance those cells?

[@AveRage_Joe]

Nope, just did some slow charges (kinda like mini cycles) after the capacity tests and were all balanced!💥🤘

[@kevinroberts781]

I diy or die. Great video though!!

[@callmebigpapa]

If you think these prices are good wait till CATL ramps Sodium

[@cjtroutt8092]

I was wondering have you used your 12 k growatt while using your mig welder. And very seriously videos that been awesome for all of the community. I been off grid using big battery husky

[@AveRage_Joe]

Yeah Ive used my welder with the growatt many times. I use it with flux core wire so no gas but Yes Sirrrrr! Actually a video or 2 ago was the last time I used it. Was the "builds shelf" for battery box video. Everything works great!

[@cjtroutt8092]

@@AveRage_Joe cool with the information I was looking at signature solar for the the new eg4 6k and do 3 of them together and get 18 kw but 4 of them is looking a whole lot better at this point and get 24 kw and do about 48 kw of solar Bifacial panels because of winter months and additional 60k of batteries to top it off for now. And your videos are awesome.

[@adamwpatterson]

Very pretty! 😁

[@AveRage_Joe]

Indeed!💥🤘

[@powerwall]

Agree

[@zestygecko]

What bms software did you use to test with?

[@zestygecko]

The reason I ask is that mysoftware does not show the dropdown to select growatt and currently the charge is set to 5a and want to change to growatt.

[@AveRage_Joe]

Ya so on there site, you can go to support tab at the top, there is more you can download in there. One is monitoring and the other is the one you want!💥🤘

[@peterking1134]

One heck of an accident 😊

[@AveRage_Joe]

🤣🤣😜💥🤘

[@vt20247]

I hope the stair didn't got scratched!

[@powerwall]

@@vt20247 heavy duty!!!

[@JeffSkymaster]

Very Nice

[@AveRage_Joe]

Yes Sirrrrr!!!!💥🤘

[@saddle1940]

Mount into caravan or RV?

[@AveRage_Joe]

100% you can do that!🤘

[@GapRecordingsNamibia]

Hey Joe, The one problem I see is that the battery will only balance when it is charging, as soon as the over voltage is hit or the battery is "fully" charged the balancing stops and the cells don't get balanced any further. Could you see if they can up date the software so that balancing can be enabled the whole time instead of when just charging? Other than that , a good battery.

[@AveRage_Joe]

Actually.....I thought the same BUT it will continue to balance. I have video of that but didnt show it.

[@GapRecordingsNamibia]

@@AveRage_Joe Hey Joe. OK? I will watch my Laptop today as the battery charges up, form what I've seen my packs stop balancing as soon as the bms stops the charging....

[@GapRecordingsNamibia]

@@AveRage_Joe Hey Joe, Nope, As soon as the blue "Charging" under system status tab goes grey the balancing stops. That means that these batteries will not be able to top balance.. Balancing is indicated by the blue "BL" next to the cells, once the "Charging" in blue stops, so does the "BL" next to the cells.

[@AveRage_Joe]

Interesting, what is the charge rate? If its really low like 1a at the top end and then goes under .5a, the bms wont read that. If you continue to charge under .5a and go into high cell cutoff, the bms will not balance. However if you charge above .5a and then hit high cell cutoff, the bms will continue to balance.

[@GapRecordingsNamibia]

@@AveRage_Joe Hi Joe, I've set the battery full current down to 500mA, even with an external charger at 5A, when the BMS says the battery is full, it stops charging and then the battery is still taking 3A or more. The problem is that the charge function switches off. I can't stop this or change it, it is set by the BMS, I have watched the high cells and the one cell sits at 3545 and just stays there, even giving it an hour sees no change in the voltage it drops by 0.001 of a volt but that is it, the voltages do not drop down, this is a bit annoying, I've had my batteries running for 2 months now and my deltas are between 190mV and 160mV... I've dropped the balance voltage and the delta to make the balancing start earlier but at 15A there is not much those small balancers can do.. Once the charge function switches off the battery does not balance the cells any further.

[@thedampestcrib6004]

Not the cheapest rn nok is

[@Lordlindef]

Price on this one???

[@AveRage_Joe]

$1699 normal but there is a sale right now for $1580 and free shipping in the US.

[@powerwall]

If you purchase 6pcs, unit price is $1500 including shipping.

[@biehpham8323]

O shit!

[@AveRage_Joe]

🤠🤘

[@prepsolar787]

their customers service stinks i have two of thees and one its loosing capacity avery few weeks now at 98ah out of 100ah contact them still waiting for a response. so i wont recommend them

[@todamnbad]

cell manufacturer?

[@AveRage_Joe]

Cells are EVE!💥🤘

[@powerwall]

Cell average is 107Ah

[@MarkPrince1317]

Wawoo so beautiful battery Brother if you have old inverter donate me if possible I will thankful for that ☕☕ Best regards from Philippines 🇵🇭

[@AveRage_Joe]

I dont have any old ones mate. Im using server ups's as inverters on the bench.

[@MarkPrince1317]

@@AveRage_Joe noted brother thank you

[@mfiyakalebi3076]

fart 🙂

[@AveRage_Joe]

🤭🤣💥🤘

[@OffGridAussiePrepper]

BOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOMMMMMMMMMMMMMMM, u nailed it buddy but one of those cells need to be cycled on its own with ur icharger or replaced. BTW the entry point into ur basement sux balls and maybe u shud install a lift.... hahahahahahaha but after a CME u will either be stuck down there or can't get in there.

[@AveRage_Joe]

💥💥💥💥💥💥💥 It tested over the 100ah tho, Maybe we pull cell and checky for the hell of it. Yeah basement entry kinda sucks. Imagine us trying to get the beer fridge down there😲😲😲 was noy fun lol. Someday in future we would like to change the stair setup so its easier. If need be I can swiggly squeeze thro a window🤣🤘

[@OffGridAussiePrepper]

@@AveRage_Joe Well its ur house, what about an external entry point with a wide stairway and u will need to put a roof over it cos of the snow, also u will need a steal 2 inch door for security cos of the crazy neigborehood u live in...lol

[@OffGridAussiePrepper]

OMG AJ, now u r copying Pete.... HOW DARE YOU!