Pioneer VSX-LX505 with DIRAC Live | COMPLETE SETUP

[@Youthman]

Pioneer VSX-LX505 with DIRAC Live | COMPLETE SETUP Links to Reference Premiere System ⬇⬇⬇ Pioneer VSX-LX505 - bit.ly/Pioneer_VSX-LX505 All Klipsch Speakers - bit.ly/Klipsch_Speakers RP-8060FA II - bit.ly/Klipsch_RP-8060FA-II RP-504C II - bit.ly/Klipsch_504C-II RP-600M II - bit.ly/Klipsch_RP-600M-II RP-500SA II - bit.ly/Klipsch_500SA-II SPL-120 - amzn.to/3XtF1Hu New Reference Premiere Subwoofers - kzbin.info/www/bejne/mXqng3-Odp1sn6s RP-1000SW - bit.ly/Klipsch_RP-1000SW RP-1200SW - bit.ly/Klipsch_RP-1200SW RP-1400SW - bit.ly/Klipsch_RP-1400SW RP-1600SW - bit.ly/Klipsch_RP-1600SW Recommended Videos: Hans Zimmer Live in Prague - amzn.to/3ULYfrm Top Gun Maverick - amzn.to/41bfbtL Hisense 85U7H - amzn.to/3mxkcgx 32" Speaker Stands - amzn.to/43zQRTV Weekly and monthly Zooms on Patreon - www.patreon.com/youthman MWAVE 2023 Tickets and Info - midwestavexperience.com/ Best pricing on Home Theater products - youthmanreviews.com/sales/ FREE Home Theater Design Tool - bit.ly/Home-Theater-Design-Tool Submit your Home Theater - hometheatertours.com. Ways You Can Support: Patreon: www.patreon.com/youthman Youthman Courses - www.youthmancourses.com/ Youthman Merch - teespring.com/stores/youthman/ Donation via Venmo @Youthman Follow Us: KZbin: Subscribe to this Channel: goo.gl/YEJ23p Youthman Crew Facebook Group - facebook.com/groups/youthmancrew Instagram: instagram.com/youthmanreviews/ Twitter: twitter.com/youthmanreviews/ Website: youthmanreviews.com/ ____ Disclaimer: Affiliate Links are used in the description of this video. I earn from qualifying purchases. Valencia Bespoke Series Theater Seats: Tuscany Ultimate Luxury - bit.ly/valencia-tuscany-ultimate-luxury Oslo Ultimate Luxury - bit.ly/valencia-oslo-ultimate-luxury Naples - bit.ly/Valencia_Naples Valencia Cinema Series Theater Seats: Venice - bit.ly/valencia_venice Budapest - bit.ly/valencia_budapest Piacenza - bit.ly/valencia_piacenza Piacenza Powered Headrest - bit.ly/valencia_piacenza_powered_headrest Verona - bit.ly/valencia_verona Verona - Powered Headrest - bit.ly/valencia_verona Valencia Premier Series Theater Seats: Oslo - bit.ly/valenciaoslo Oslo XL - bit.ly/valenciaosloxl Zurich - bit.ly/valenciazurich Tuscany - bit.ly/valencia_tuscany Bern - bit.ly/valencia_bern All Valencia Seating - bit.ly/valencia_all

[@thiagodelgado3128]

The most impressive to me is how far you go with this receiver, ins't exactle cheap but go to reference level's at this price point, is far better than my old Yamaha 2020 with almost the same price point, and surprise that system never went to referece level's like this Pioneer

[@maxjonak6742]

Hey man! I’m a teen who built up a home theater over many years in my bedroom and I just wanted to say I was inspired your channel. I have a tiny bedroom and very low budget being a teen so it took a lot of creativity but I ended up with atmos, projection, theater seats (+bed) and a heck of a lot of second hand and diy stuff. Thanks for being an inspiration

[@Youthman]

Hey Max, you don’t know how much this excites me brother! I was a teenager when I first got into Audio. I love the fact that young guys like yourself are getting into the hobby that’s incredible what you’ve been able to do in a bedroom. I would love to see what it looks like. Feel free to email me some photos at [e-mail].

[@o.c.g.m9426]

Keep up the grat work. Great job as 2nd hand, used stuff is great. Nothing wrong with hard work.

[@voiceofreason9238]

Dirac live! looks like a rare example of a feature which is more sophisticated, faster and easier than the previous standard, Audyssey.

[@DavidAg02]

I recently upgraded from an Audyssey XT32 enabled Denon to an Onkyo with Dirac Live. No other changes were made to the system, and the benefit from the room correction alone blew my mind. I'm now a huge believer in Dirac.

[@Penul15]

Thank you for another great video. You have made my switch to my new Pioneer simpler & really painless! Keep up the excellent work. Took me less than an hour after watching this.

[@Youthman]

Thank you for the kind words Peter. Glad the video was helpful.

[@qwertandrew8720]

I have the LX 504 and I'm very impressed with the sound either listen to music or watch tv and love the app.

[@mattgiunt]

Thanks Mike, The clearest instructions Ive ever seen on how to use Dirac Live.

[@Youthman]

Thanks Matt glad the video was helpful

[@jacobsilguero6169]

I bought the onkyo rz50 back in December and only recently as of last week. I finally ran Dirac live for the room calibration and OMG! The sound was incredible compared my original settings. I feel like I’ve been missing a lot of the audio playing movies or games or streaming. Definitely love Dirac!

[@Youthman]

Dirac Live is certainly a fan favorite.

[@dannyr2272]

@jacobsilguero6169 Did u use the app for Dirac ?I'm getting my RZ50 this weekend !

[@jacobsilguero6169]

@@dannyr2272 to be honest I forgot which one worked. I believe the laptop version is what I was able to use to get it to calibrate, but I did download the app to my phone as well. I had a little bit of WiFi issues before I got it work.

[@ajashadi1]

@Youthman and others, at 16:00 you talk about crossover settings. 1. My question is since Dirac has already done its part, shouldnt the setting be trusted and see how it plays out? I am not against setting crossover manually at 80hz and speakers to small, but then it defeats the purpose of trusting Dirac to do its thing and give you great sound. Or do you think that change is icing on the cake? Please provide your thoughts.😀 2. I still have my old Sony DH 540 and Sony DN1080. I wonder how the speakers will sound if I go by that cross over 80HZ setting assuming that setting is available in older receivers.

[@arielrodriguez6980]

Great info! From what I understand the LX505 does not have DLBC (Dirac Live Bass Control). What is the difference on how the LX505 calibrates the bass vs DLBC?

[@esjovold6572]

I’ve had the Pioneer. LX-505 since last summer. It made a huge improvement in my dedicated theatre over my old system. One thing I never did when I setup Dirac was to limit the range it can affect. I’m going to have to go back and do some research in that. I run Dirac with a UMIK-1 and my laptop. Did you try that in your living room, I was wondering if there is any difference in the sound, I have never tried the app to calibrate my setup. Thanks for the video.

[@dometweeter7093]

The Pioneer looks very User Friendly. Thanks YM.👍

[@Youthman]

It is extremely user-friendly

[@kcr2365]

Nice living room! Cherry floor is always a hit

[@arielrodriguez6980]

This is great information. My LX505 arrives tomorrow so now I am ahead of the game thank you. Where do you leave the sub gain before calibration?

[@joeonuh]

Thank you for your clean detailed video . Very helpful for me .

[@felixmasis3658]

This was a very well detailed set up instruction video . Thank you.

[@Youthman]

I’m glad you found the video helpful

[@JCOTV]

I recently bought an RP-8000f pair (on ultra super discount couldn't resist) to replace my 10 year old Onkyo tower speakers. Amazing sound with my RZ50 and Dirac live. Was wondering what center console get next, Klipsch 404c M1 or M2 (504c wouldn't fit). Amazing setup in this video and beautiful living room.

[@Youthman]

If the 504c won’t fit, the smaller 404c would be your next best option

[@The1Music2MyEars]

Hello! Can you explain the listening modes? It has Auto Surround, Direct, Pure Direct, and DTS. Which mode is recommended? Also, which mode allows Dirac calibration to stay on?

[@danielwander605]

Are you able to use the Dirac Live PC application with a UMIK, or does this unit require the version shown here?

[@danemoreno88]

Love this as I will be doing the calibration Thursday for my umik-1 for rew as well I have a rz50

[@Youthman]

Hope you find it helpful.

[@danemoreno88]

@@Youthman yes definitely

[@Techtheo]

Hi, Youthman I have Polk Reserve series speakers, the R700 towers 38Hz-- 38Khz, the R400 center 48Hz - 39KHz, and the R200 Bookshelf 51Hz - 38KHz what settings do you suggest for these speakers? I'm very new to home theater

[@michaelwyckoff7593]

Looks next level

[@Karto86]

I would love to see measurements post dirac - how they compare to the frequency response dirac displays in the app after the correction.

[@dannyr2272]

Great vid youthman 🍿

[@Youthman]

Thank you, Danny

[@musicfun2606]

Thank you for this great video! I have one question I can’t find an answer to. Is it OK to turn your receiver on separately from the TV when you’re connected by EARC? If it is, then do you use the receiver remote to control it? I’m afraid to try it because I don’t want to ruin the connection between the TV and the receiver. They’re working great right now and I can use the TV remote for almost everything on the receiver.

[@Renan_Cas]

Hi Youthman! One small question: is the pairing of Klipsch with Onkyo or Pioneer or integra still a thing??

[@Youthman]

If you’re asking, do you need to pair it with one of those, the answer is no. I have used Denon, Marantz, Yamaha and many other processors with Klipsch speakers.

[@voiceofreason9238]

I love Marantz with Klipsch. I believe Onkyo actually has a setting specifically for Klipsch speakers built right into the software.

[@801J0J0]

Hi Youthman what a great video. Have you tried running Dirac on a laptop and adding a house curve? I found it to be a huge difference in terms of sound between the app and running Dirac on a laptop.

[@Youthman]

Maybe I’ll try it with the Definitive Technologies speakers I have in for review.

[@chrisohrling149]

Good day youthman I have a question to ask you I am stumped on this as I bought a Pioneer vsx 1016 txv home theater receiver second hand and it didn't come with the owner manual or the auddessy mic to do the calibration properly and I ordered a auddessy mic on Amazon and was wondering if I could use any auddessy mic for my receiver as I don't know what the original one looks like may you please let me know thank you youthman for the help

[@caliclownz]

Hello,I have an older model receiver and I wanted to know if I can plug in a mic to sing karaoke songs through my receiver?

[@ddcrocky3831]

Is this how it would work on the denon 8500ha after purchasing dirac live and you can use your phone to calibrate it

[@jonb2437]

I have floor standing speakers and put the setting at large so I could turn on double bass. Sounds good. I don't understand though why it makes a difference if you have put the crossover at 80 and lower

[@marcducati]

I was about to go with the Onkyo TX-NR7100 and then saw this. I am now wondering which one to chose. I've had pioneer before, long ago, and never had issues. I want Dirac so either the Onkyo or this.

[@gak0090]

Great video! Is it possible to select one source for the video and a different source for the audio (for primary speaker setup). For instance I want to watch a football game, but for the audio I want to either stream bluetooth, spotify or listen to phono. The particular model I'm referring to is Pioneer Elite VSX-LX305- but I assume it would be similar to this. If it's possible, how would I go about doing it? Thanks

[@johngibbons579]

Hi youth man I’ve previously set up my vsx lx 305 and am frequently getting various errors when using Dirac and cannot complete the calibration. Errors incl speaker level adjustment (which I’ve manually adjusted to be in green zone). Then I got an error about configuration mismatch which is a first. Not sure if this might be an issue with the app itself? Any advice?

[@Youthman]

Unfortunately, I did not experience that issue when setting up the 505. I would reach out to Pioneer Tech Support and see if there is something they are aware of.

[@djpault]

A bit late here but loved the video it was very helpful when setting up my Pionerr VSX-LX505. Just curious when you set the curtain did you also set it for the subwoofer channel?

[@Youthman]

Glad you found the video helpful. Typically curtains are used on speakers. I prefer not to add a curtain to my subs.

[@djpault]

Thanks so much for the helpful quick reply.@@Youthman

[@davidbilan6853]

Hi max, do you prefer the Pioneer or the ANTHEM mrx1120.

[@MrSlickback2]

@Youthman Big Fan. I have the Onkyo RZ50 and when I run Dirac the results are dull and lifeless. I don't know what im doing wrong. I have Polk Lsim towers and surrounds with Monolith 12 subs. Please any advice would be welcome.

[@failingup4907]

Do you have to use the suplied micriphone or can you use an Umik 1 and do it from your computer/laptop?

[@Youthman]

You need to use the included calibrated mic

[@failingup4907]

@@Youthman That sucks. I just bought the Umik 1 and a stand. I'm starting to think I might need to go back to the Arcam AVR11. The sound coming from that was amazing but so many issues.

[@crashedcorvette666]

Hi, thank you for the perfect video. I watched several others and I have to keep coming back to this one to really understand and follow along. I had a question. Did you turn the subwoofer to 50% at first configuration, then to 30% during the actual test? Basically, did you change your subwoofer setting to lower level for the test, then turn it to your liking when the test was over (I like lots of bass in my music and usually turn it full blast up)

[@Youthman]

I typically start at 50% gain on the sub. Then if I need more bass after calibrations, I adjust the subwoofer trim level in the AVR.

[@jonb2437]

I had to turn it down during the test because the Dirac kept complaining it was too loud. Andrew Robinson suggested to do this

[@arielrodriguez6980]

If I change a crossover or a speaker level do I need to go back to dirac and reload it on the dirac slot?

[@ChupaRustom2023]

Hi, love your videos always, please can you answer this, in pioneer AVR there is one option that is phase control plus in audio parameters, which is set to 6 Millisecond and some Dolby songs and movies sounds great with that but in some videos or movies bass is missing unless I bring it to 9 millisecond, but then it looses the bass in other movies or videos, what’s the best settings for phase control plus. Please help

[@Youthman]

Thank you for the kind words. He would need to take measurements with something like the UMIk-1 and REW software or an Omnimic 2 from Dayton audio to know what’s going on when you change the settings and how it’s affecting your frequency response. Without taking measurements, you’re just guessing.

[@ChupaRustom2023]

First of all thank you so much for your response, I totally get what you are saying but I don’t know how to do that, however I have a Behringer ecm8000 microphone but don’t know how to use REW

[@Youthman]

Lots of REW tutorials on KZbin to walk you through it.

[@_intrepid]

I'm upgrading my home theater and recently got a TX-RZ70 from Onkyo. It has a Klipsch optimized mode built in. Does it work? Is it worth to limit myself to Klipsch or would it be better to also look at some other speaker brands in that ballpark?

[@billsmith9249]

THANK YOU FOR THIS! I have the LX305 so I imagine it should be about the same? I just upgraded all my speakers to Klipsch RP-8060FA II for 4 surrounds and the RP-504c for center. Was a lot of work to run additional wiring for the built in atmos parts but tomorrow after work, I want to run the DIRAC setup and let it auto calibrate and then watch the Transformers 4k [2007] movie. I hope it was all worth it! I am half falling asleep but caught the part of going back in and capping something at 500HZ... what is that and why do we do that again? What happens if we do not touch that? Thank you again!!!

[@Youthman]

That is called adding a "curtain" which tells the calibration software not to correct for frequencies above what you set it. Reason is most of the issues that need to be addressed are in the bass frequencies. Google Schroeder Frequency.

[@sg1ds919]

I would like to see a video from start to finish on how use Dirac Live and what those numbers mean. I'm still a little confuse about Dirac Live.

[@Waddamattau]

Always great videos! I just bought a house. I had a Nakamichi Ultra 9.2.4 soundbar. It's pretty decent. I actually separated every channel with amps to hang them up. I just wanted to know if this receiver is worth buying today. Seems like I can get it to 11.2. I need your seal of approval please. Thanks and blessings.

[@haivu-ph6sv]

Have a question that: if my 2 main Front Left and Right speakers (also then Center) are 4 Ohms speakers, and only 2 surround speakers are 8 Ohms, in the config of impedance, which one should i choose: 4 Ohms, or 6 Ohms and Above? I'm confuse that Pioneer dont let me choose 4-16Ohms or set for individual speaker. Tks for your information!

[@mattjames8010]

Hey would the lx 505 be a good choice for my system it is a Golden Ear xl sound bar with a super sub x and a pair of super sat 3s for a 5.1 but I will later on make it a 5.2.4 in a 21-12 room and a 8’ ceiling I will be listening to music and home theater but more 2 channel with the subs playing

[@aliciaANDanthonySandoval]

I have a pioneer vsx lx301 and it would be nice to upgrade to the 505 but don't have the money for it right now but maybe one day. Anyway great video 😉 👍🏼

[@mnadeem500]

Have you removed curtain for subwoofer also or should go with full correction? Can you share snapshot of subwoofer curve after dirac live?

[@10108sebass]

Did you ever get an answer for your question. I'm using a mini dsp with 3 subs and don't want dirac to ruin all my hard work lol

[@JoeWilly69]

After going thru 1st measurement couldn't click next? In the green, what's up?

[@calvinong2991]

One of the most easy and clear vidz I have come across for 505 setup! You have one new subscriber!!! ... one quick question, the only place I can place my subwoofer is directly opposite my LR speakers, I have inverted the sub phase to 180 degrees, when running the dirac live, do I set it back to 0 degree or leave it as 180 degree phasing?

[@Youthman]

Thank you Calvin, I’m glad you found the video helpful. The phase control within Dirac operates the same as the physical phase switch or dial on your subwoofer. So if you set the dial on your sub to 180 and in the AVR you set it to 180, that would be the same as having both set to 0. So basically you only want to adjust the phase on one, but not both. Best to measure to see if 0, 180 or somewhere in between works best.

[@Daniele-jl3zk]

Hi, can you say me If I can have 5.1.2 (2 dolby atmos on the front) and bi-amp? tnx

[@ugurylmaz4106]

Hi Youthman, I got question for you cuz i got confused when i look at pioneers official website and the device. On the back panel of this device there is 11 power out. 2 of them named as zone 2 but also labeled as selectable. So can i use it as 7.2.4 if i dont need a zone 2? Or do i need an external amp to use it as 11.2?

[@TheRayray204]

I have the same receiver, I never understand what level to leave the subs at while I'm running Dirac. I have svs pb1000 pros.

[@steveandsheilalauder8261]

Thanks for the vid. I think it helped. Oddly, big budget tv mini series tone (such as Yellowstone, 1923) is great, local antenna and news programming is too bright. I have yet to solve that issue. Perhaps stop watching the (so called) news (shows), I think placing the 'curtain' at 500 hz helps - perhaps lowering to 300hz might be even better.

[@pyrocrew13]

Not sure what I’m doing wrong here. Same receiver and doing initial Dirac live set up. It runs though the speakers and levels are all in the green. It then starts to run the system and I get an error message. Says measurement failed because volume is too high. Turn down volume and try again. I back the Dirac master volume all the way down and it still says too high and won’t run. Someone help

[@NicholasTruehl]

Hey man, love your videos as they have been very informative as to how I am building my home theater. I know this is unrelated to the content of this video (sorry), but I was wondering if the 150in 2.4:1 (or is it 2.35?) screen you have is 'overwhelming' to any guests or yourself in a room of your size. My room happens to be the same dimensions except I only have 8ft ceilings. Debating on 138" or 150" 2.4:1 at this point. My first row will also likely fall in the 9ft distance range. Thank you for the videos!

[@Youthman]

I have never had someone move from my front row to the back row because the screen was too big. I definitely would not go any larger or sit any closer but I love it.

[@Youthman]

I can tell you if I were to sit in my back row which is 14 feet from 150 inch screen, it looks too small for me

[@NicholasTruehl]

@Youthman Thank you so much sir! Probably going to pair a SI Gray AT 150in with my NZ9 in that case!

[@CafeinaPlus4k]

I cannot rum my Pioneer Elite LX-305 Dirac Live, due to an ERROR DU1001 (network error). My receiver and my Pioneer app are conecting on the same network, and i can control my receiver from it, but Dirac Live shows me that error. Any clue guys?

[@slyfox720]

So have a technical question, I ran the Dirac live on the lx305...and after completed, seemed like the bass was lacking on the subwoofer...did not even seem like it was outputting any signal......but without running it...and set my speakers manually...it all seemed fine...I am connected via lfe for subwoofer?

[@jonb2437]

I had this same issue. What I did was: a) increase bass under the tone setting b) put the front speaker as Large (I have floor standing speakers). This allows you to turn "Double Bass" on. c) put crossover at 100htz The subwoofer is more active and noticeable. Most of all it sounds clean and crisp

[@seanmason3116]

It looks like you can only use the provided mic. Can you used another mic with the AVR such Umik-1?

[@dicmccoy]

If you use Dirac Live on a PC. The Umik-1 or Umik-2 will plug into your PC and Dirac Live on your PC will connect to the Pioneer through your wireless network. The Dirac Live software on the PC will give you 3 different options for measurements and more measurement points than what Dirac uses built into the Pioneer.

[@kennyscott2866]

I just recently purchased this AVR and noticed Dirac also wanted to set my bigger front and center speakers to large and the surrounds small, with Double bass and at 100hz (7.2.2 system 2-400w Klipsch subs). In the past I have always done as suggested with my older elite and set to small at 80hz for all speakers. However I noticed this system seems much more powerful now that I have left it where Dirac set it. I wonder if you have any more advice that would help me understand the thought process with this?

[@TheMattyB]

This is a great question, wish it got answered! What'd you wind up doing?

[@Youthman]

I personally prefer to run my speakers as small, even in my dedicated theater with LCR’s that have (2) 12” woofers in each speaker.

[@TheMattyB]

@@Youthman thanks for the reply!

[@kennyscott2866]

@@TheMattyB I left them the way drac it set with double bass.

[@pablovi77]

You need to use HDMI 8K enhanced if you want to use a 4K 120hz console.

[@noeikujoo]

Why only the calibration of one subwoofer, even though you seemed to have two of them?

[@pyrocrew13]

I figured it out. Apparently the suns were too hot. They were in the green with other speakers, but would cause an error in the system until I backed them down below the green. I ran the 3 position quick set up, then raised the sun level afterwards. Sounds good, but now that I know what the problem was, I may run the 9 position set up since I have 2 rows of seating.

[@klbass68]

What tripod are you using?

[@Youthman]

kzbin.info/www/bejne/mpyciaSqm8mFnacsi=0n4OraZDQEzUm_y7

[@klbass68]

@@Youthman Thank you, sir.

[@mikeschmidt2339]

is this 505 same as the rz50 looking to buy rz50 if it worth it build quality and all

[@vettesweetnos]

Rz50 is $200 more currently but has better crossover adjustments and us less plasticy

[@mikeschmidt2339]

@@vettesweetnos i got the rz50 trying it out

[@jayols0910]

Thanks much for this video

[@keepingupwiththejones2933]

Dirac Live in the Youthman house❤❤🔥🔥

[@Youthman]

Thank you kindly.

[@Youthman]

Filming a new video today. 😀

[@Mayday73]

So timely!! I will be setting up a Pioneer VSX-LX305 soon and the setup should be very similar so this video is supper helpful. question that maybe you can answer is the included mic a calibrated one? I know it isn't too much like the UMIK-1, but wasn't sure if this version of DIRAC Live needed a calibrated mic.

[@Youthman]

That is the mic that’s included with the pioneer and is suitable for calibrating with Dirac Live.

[@Mayday73]

@@Youthman Thank you!

[@johnsmith-qz4bv]

great video ....the dirac live calibration looks pretty easy to use..

[@Youthman]

It is and the app is super intuitive. You can also connect it to a computer and run Dirac that way for even more control.

[@T_R_H_A_C]

Hello my friends. Why my AVR everytime when I do DIRAC CALIBRATION, set SW distance to 0ms? Onkyo rz50

[@Youthman]

That just means he did not have to add any delay to get your subwoofer time aligned with your speakers. It’s not a measure of distance it’s an amount delay.

[@T_R_H_A_C]

@@Youthman oh. Thank you!!!

[@bobsmith1841]

My issue, any ideas??: In the example I have a couch, but I primarily sit in position 2(on left seat of couch) so does this become my "main" listening position? Should I measure starting at seat 2, then 1, then 3?

[@wktek48]

Would like a dirac setup as this for the Denon receivers, instead of the pc version. It's easier and i dont have to buy a laptop and umik mic...so denon please make a dirac app like the pioneer. 😅

[@The3hunnaa]

Hey Youthman great video. I have a denon 4800H and the Dirac live costs extra with denon receivers. Did it come included with the Pioneer receiver and is it full bandwidth Dirac live? As that is even more expensive then the regular Dirac live on denon unfortunately.

[@Youthman]

Yes, it comes included with the AVR. They typically do not tell you what version of Dirac Live they are running.

[@scruffy8861]

@@Youthman Ouch.

[@The3hunnaa]

@@Youthman thank you for the reply. It sucks denon did not include it. AVR already expensive enough here in Canada and now they want to charge $450 for Dirac on top :(

[@redbaron2448]

My volume is in the negative when I turn it up it's slowly increases to the positive why is this it starts off like negative -40db then turn up goes to -29 up more to the positive+5 where it's Very loud why is this, should be at 0 then turn up to positive 25

[@Youthman]

This video should help - kzbin.info/www/bejne/fIDZc3-Mm5Vra68

[@redbaron2448]

@@Youthman thank you but my pioneer 935 doesn't have this, has something but not this, thanks for trying

[@keepingupwiththejones2933]

So Dirac only requires 3 microphone measurement positions? Very interesting. Audyssey always wants the 8 positions.

[@Youthman]

Yes, that was the only two options in the app

[@av_rob79]

If you run Dirac using a PC you can do up to 17 measurements

[@Youthman]

That’s very good to know.

[@Mayday73]

he chose the simple 3 position one for the video. It had an option for one that had at least 8 positions. (Edit: sorry I thought I was replying to a 5 minute old post, should have refreshed before I commented.)

[@Youthman]

Correct. There’s no reason to show you how to do eight positions. Most people can follow a visual of where they need to place the microphone. The three was just for illustration purposes.

[@seanb1321]

Okay this is cool. I do Wonder though why all the manual adjustments. I really don't need an answer to that. Dirac is supposed to be really good, and after decades of microphone calibration in receivers, I feel this is unnecessary

[@HoodCamille-f9z]

Goldner Mountains

[@sparky19699]

I can't even get this app to work it will not connect to my receiver and my pioneer has wifi access

[@Youthman]

I didn’t have any trouble connecting it. I would contact their tech support to help you troubleshoot.

[@sammy10001]

Good tutorial, but that's a very hot take on not choosing to correct above 500hz, and putting a curtain on it. To each their own I guess. It is a valid point though, if you want to keep the "house" sound of your speakers - the house sound of klipsch, B&W, etc. etc.

[@Youthman]

Not really a hot take, just my preference. Many agree that it's best not to let room correction adjust higher frequencies, but again, that is preference, not Gospel.

[@sammy10001]

@@Youthman I just tried with my RP600M Mark 1 setup. I took away the Klipsch sound from my system LONG time ago, when I used a harman target approximation as my target curve. Lowered the curtain to 500hz. I definitely heard a difference, couldn't tell if it was good or bad initially. 30 minutes of music, still couldn't tell if I liked it or not. Launched a video game, elden ring, and instantly felt the sharp needle like sound effects hitting my ears. Probably way too bright. Music might be okay with this, but the brightness hurts with video games when a lot with high pitched sound effects. Just my take.

[@Night_Watch413]

Nice video as usual, I'm looking to upgrade from my Yamaha rx 2070 to something with Dirac calibration. Waiting to see the pioneer vsx-lsx805.

[@BeckDominic-d2e]

Kory Path

[@cbev599]

Half way through dirac... then nothing... on to the next video

[@Youthman]

What do you mean?

[@dusanignjatov7658]

Wrong mic for dirac!