How to Change FRONT Brake Rotors (Discs) and Pads (Complete DIY Guide) - DODGE GRAND CARAVAN

[@YouWrench]

Need parts?: Front and Rear Rotars and Pads Savers Set USA: amzn.to/3pc8hjY Canada: amzn.to/3oyIuEq Need a brake rewind kit? USA: amzn.to/3tKbnz4 Canada: amzn.to/3kKsDkZ

[@leonpolyakov971]

Thanks!

[@YouWrench]

Thank you for your support! :-)

[@channtheman35]

Great video! Followed the entire thing and did my front brakes and rotors today. Probably the most helpful part was how to get the stuck rotors off. Mine were STUCK! Kept whacking it with my mini sledge hammer and rotating and finally they came off.

[@bobsoft]

That's why its important to clean and lube the hub face to prevent rust between. An air hammer makes it nice to remove rusty rotors.

[@robhutson5451]

I'm so thankful for your videos. Do you have videos for other makes and models of vehicles? I have a Dodge Grand Caravan like the one in this video and I followed your instructions and I confident that the work performed is quality. Thank you sir for all you do.

[@victorgomez6942]

Great video! Well made for a beginner like me.

[@YouWrench]

Awesome! Gload we were able to help you out and get the job done! Any support in return much appreciated: www.paypal.me/youwrench --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZbin channel. 3) Please Like our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@bigredd1574]

excellent video! But, you did not mention the master cylinder before compressing

[@bobsoft]

Mention what? You don't need to crack any bleeders or open the master when compressing the calipers.

[@bigredd1574]

I meant brake fluid reservoir@@bobsoft

[@bobsoft]

@@bigredd1574 i understood what you meant. When you are done you should have a higher level but not over filled.

[@Tallokensol]

Hello, my 2015 caravan is making a Jerky movement when coming to a stop, sometimes it turns off by itself when on a full stop. Any suggestions or recommendations? Thank you so much and much appreciated.

[@YouWrench]

That could be a quite a few different things unfortunately. Unlikely to be the brakes though, more likely would be things like transmission, or even engine related, or cat/exhaust. It would be worth getting a cheap diagnostic code reader and attaching it and seeing what codes are being generated. This, in turn, should then point you in the right direction to get started. Could be simple, could be a nightmare, but it needs some research or to be seen in person by a qualified mechanic to get a feel for the nature of the issue. Best of luck! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZbin channel. 3) Please Like our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@matthewmorgan4765]

Thanks for another great video. When is it acceptable to change the brake pads only, or rather, what determines when the rotors need to be replaced?

[@YouWrench]

I think this is covered in thie video actually, but basically on the disc is a minimum thickness usually engraved around the rim. Provided that the disc is still thicker than this, and that the disc face is still flat (not pitted from the previous pads) then you can replace pads only with no problem. But if the discs are pitted then they should be replaced as the pitting can cause damage to the new pads, or stop them working efficently. Hope that helps :-) www.paypal.me/youwrench --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZbin channel. 3) Please Like our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@JC22-nd7pg]

Thanks for the though work 🎉🎉🎉🎉 finally

[@JC22-nd7pg]

You guys take your time to make sure it's right 👍👍👍👍

[@YouWrench]

You are most welcome, glad you are enjoying the video's 👍

[@msntung]

Great video. Why can’t we spray inside the bracket hole?

[@YouWrench]

Where in the video was this please? --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZbin channel. 3) Please Like our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@dennycrane4261]

I have a question sir, how do i know the size of my rotors? Because apparently there are a few sizes of rotors,i have watched your videos and they're awesome,but i need that little piece of information so i can order the parts beforehand. Thank you so much!!!!!!

[@YouWrench]

Yes, you are correct! Grand Caravan's can have Standard of Heavy Duty brakes. If you look in the video description for this video you will find a link to our video on how to tell which type you have and the rotor sizes for each type etc. PLEASE BE SURE to use our Amazon links to order your new parts to help support our channel. Thank you! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by hitting the SUPER THANKS option below the video on KZbin, or by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you SUBSCRIBE to our KZbin channel. 3) Please LIKE our video's on KZbin (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@BillWilson-kd2jp]

No need to bleed the brake fluid?

[@McBain403]

Hi can I just use a c clamp instead of a brake rewind pack?

[@bobsoft]

Yes, You will have to put it over the banjo bolt to get it in the middle and be able to push both pads in evenly.