Renaul Megane II . Key programming with Renolink

If your Budget is low you can program these keys with other programmers not only with those that cost thousands of euros.
The purpose of this video is informative and educational!!!

[@gameiro59]

I've already programmed a key into a Megane with Renolink 1.87 EU, but didn't know the tip to let the door open. Last version is 1.99. Thanks for the information.

[@YOYODiagnostic]

👍

[@darkojankovic6440]

Great video man! Very helpful!

[@YOYODiagnostic]

👍

[@dul-boy]

When I try to key programing,i finsh read pin and connect,but on start learning i get-7f3b22 Conditions not set or sequence error...Any help,thanks...

[@soptea]

Respect Gabi Gafu !

[@YOYODiagnostic]

Hello This is true. Does a great job with this program. 👍

[@NorbertM98]

That person is actually a scammer with the program. Sells the program to people on different platforms, than charges for the license separately in some cases. I could only get my license via the help of PayPal... The listing had the license, but the software I got with the device did not.

[@kaller.9440]

If I don't have any cards for the car at all and I get used 3 button cards and new transponders, can I just add them to the car? The only original thing I still have for the car is a transponder, but it is not recognized by the car, so I can neither open nor close it and I cannot turn on the ignition. If I find the cards again, I can turn on the ignition, but there are other transponders in it and I would now get 2 cards with the same buttons from a used car and swap the transponders in the cards and then teach them, I have to do each one Press card on Validate or only when I have put all the cards in one after the other?

[@Bezaine]

thank you so much this was realy helpfull

[@YOYODiagnostic]

👍

[@saifhexprog5885]

good work bro

[@YOYODiagnostic]

Thanks 👍

[@dirtymechanic627]

my open door sensor is not working(the door is closed all the time) and about 2 month ago i programmed a key and there is no problem!

[@kbgaming6012]

Does it have to be a Reno link cable?

[@CaptainRuderalis]

Hello friend, what is your cable(OBD)? Do you have a link?

[@yonag5308]

Is it possible to program a new keys when the original one is not working ?

[@YOYODiagnostic]

Hello. Yes . You don't need the original key.

[@kaller.9440]

how did you get a connection to the probe? I get rid of the red x but then I get this message Character spacing is invalid and cannot be removed. I just want to read the pin of the cards and then establish the connection for learning and programming and then after that has happened successfully cut the connection.

[@SamSam-ee3fy]

Hello mate I have Renault Zoe 2019 sealed the motor and inverter need’s both programmed to Ecu I have can clip what’s the best way to do it ?or could u do remotely?

[@YOYODiagnostic]

You need CanClip

[@dusandilove2905]

Hello, I menage to program one new china card, but its only work to start a car not key lock. The card that before I use program was opening car ( but not start engine) now stop opening car and not recognise by computer program. Now I have 2card that start engine but no card that unlock car. I tried couple of times to reprogram, but renolink only recognise 2card (one is new) that start engine, but old 1card renolink dont recognise. What can I do to get opening car function back? Thank you

[@mustafasmajlovic2676]

Hello Interface disconnected by me how did you install that renolink? Thank you.

[@patrickshish9262]

What happend between 3:06 and 3:09? Im Stock AT 3:06...

[@JosipBasic]

Can be just new key added to car, or you need to have all keys present while doing this process? Car is Clio Mk2. This part is confusing me. Thanks for reply.

[@YOYODiagnostic]

1.You can program keys even if all are lost. 2.Another key can be added even if you have one present, but both must be learned because the old one will be deactivated after programming the new one, for this reason both must be learned.

[@JosipBasic]

@@YOYODiagnosticThanks for clarification.

[@YOYODiagnostic]

@@JosipBasic ,,👍

[@rectodanacol9017]

Renolink code inyector?

[@enerzis]

hi dear friend, i comment you that my cards are disprograming include the original cards. you know how i can re programing my two cards? i have the original cards but this one is deprogrammed.

[@g____-590]

Did you insert new key at first?

[@YOYODiagnostic]

Yes,it can do all keys lost. If you lost your key, no problem it can program the new one, but use original software from Gabi Gafu.

[@charalambosavgousti121]

Hi there! is there any Renolink V1.87 software available for free?

[@EtznabMirror]

What is the name of the program?

[@psheraton81]

How to activate hands free on new key ? Is this possible with renolink?

[@YOYODiagnostic]

as far as I know with these cards it should work automatically if you order the right card. If you already have 2 keyless, the 3rd one won't work, you have to delete one from the memory.

[@kaller.9440]

Funktioniert es auch beim Renault Espace IV mit Keyless Go? Muss leider noch auf meine Bestellung warten. Mit dem Renault Clip braucht man ja ne PIN für nen Schlüssel anlernen.

[@YOYODiagnostic]

Ich weiß nicht ob es funktioniert. Ich habe nicht probiert.

[@kaller.9440]

@@YOYODiagnostic ich werde es Probieren und dir dann Berichten.

[@YOYODiagnostic]

@@kaller.9440 👍

[@kaller.9440]

@@YOYODiagnostic Hallo, wie versprochen bin ich wieder da. Also du kannst beim Renault Espace IV die Schlüsselkarte selbst neu machen. Ich muss nur noch rausfinden warum die Keyless Go und die ZV nicht mehr über die Karten geht. Auch kannst du deinen Kilometer stand per Renolink ändern, geht über extra und dann Tdb.

[@YOYODiagnostic]

@@kaller.9440 👍

[@laurentiubancila7675]

What is the obd that you used?

[@YOYODiagnostic]

OBD link

[@scn2882]

Does it work in megane ii ph 2? (2008)

[@YOYODiagnostic]

Hello. Yes . 👍

[@Monty16v]

Renolink can run on windows 10? Or only windows 7?

[@YOYODiagnostic]

I don't know.

[@coyotus77]

I have error: 7f3b22 conditions not set or sequence error

[@YOYODiagnostic]

You are using a clone or the original?

[@coyotus77]

@@YOYODiagnostic I have the original OBDlink SX with Renolink activation.

[@coyotus77]

It's strange that Renault Pin Extractor reports wrong ISK

[@coyotus77]

It may be that in the case of Megane 2 ph 1 2004, you should choose Megane 2 ph 2? The Russian website wrote that it might help.

[@YOYODiagnostic]

@@coyotus77 select Megane 2 Ph2, open the driver's door and turn on the hazard lights.

[@clandestinocubano5338]

excellent video, where can I buy renolink safely, also do I need to buy the interface? Thank you

[@YOYODiagnostic]

Hello. I did a review with this programmer. Watch that video and you will find answers to all your questions. Do not be lazy!