YuXin Kylin V2 M Review | SpeedCubeShop.com

[@vibhanshupathak3622]

2:42 was hilarious waiting for it

[@lukasmiklo5815]

Why didn't he talk about it? XD

[@bijandey5634]

I was actually excited because I was actually deciding between the two.

[@besmart4402]

@@bijandey5634 me too. for now which one will you buy?

[@twistiicuber1055]

I’ve been sitting in my car bored af, thank you for blessing me with this 10/10 content

[@crudephoenix]

@SayHi nobody asked you to reply to a 1 year old comment

[@crudephoenix]

@SayHi 1) I was planned so that whole roast is bs 2) Please stop starting an arguement on a 1 YEAR OLD comment

[@cenectric9759]

SayHi crude Pheonix has a point

[@Anonymous-if9mp]

@SayHi hi dickhead

[@Anonymous-if9mp]

@SayHi lol you just admit you're a dickhead by hi back.

[@chancejacksonfps2714]

Lol the 17x17

[@Cubing342]

Yo no comments

[@stevenharper990]

Yuxin in 2019: 10 dollar magnetic cube moyu in 2020: Hold my rs3m 2020

[@cevsanimations5405]

0:03 Thank you yuxin thank you for your low prices and we are forever grateful. ***$745.95 17x17 shows up***

[@wonton9503]

I guess that price is technically sort of maybe good considering how hard it actually is to make that cube not saying anyone should actually buy that tho

[@IllShivyou]

And also it’s magnetic and imagine putting magnets in so many pieces

[@danielegray666]

Don't forget the tiles as a big plus for people who prefer the stickered look. As a hobby cuber I loath having to buy and apply replacement stickers. As in the case of my Yuxin little magic that I use as my travel cube, I'm almost better of buying a new cube each time I wear the stickers out for the price and hassle. I've had my Kylin V2 for a week I shouldn't have to worry about that again.

[@ilikephysics2232]

Had to have high high hopes for a livin' Shooting for the stars when I couldn't make a *KYLIN*

[@liorschifrin]

Fire DarkS this is way underrated

[@skilless935]

I just realized that I could have gotten this instead of a Rubik's for the same price. Goodbye.

[@trimineman8507]

I have an MF3RS3 M and love it! It's fast but still stable and controllable, and it's my main! (after cubicle weight 5 on the core and 2 on the pieces)

[@bruce1170]

RIP Mr. M

[@bonkdragon5504]

F

[@Cubemaster]

Was that ever good?

[@bruce1170]

@@Cubemaster its bad that was a joke man

[@hpsmanager8614]

@@Cubemaster they are good

[@EmperMiner1990]

they feel pretty good though

[@zachbear]

You and Uber Cyber both released the same review on the same day. I can here first, though it was a tough decision.

[@josephlimones-gallegos3502]

Idk if it was the same day but I know I got a notification for JrCubers video on it today as well.

[@trimineman8507]

my MF3RS3 M is amazing after lubing and became my main instantly after lubing pretty much.

[@the1barbarian781]

The YLM 5x5 is amazing for me, and feels great with setup! You doing a review on it would be cool, comparing to the wushang and aochuang :)

[@FinnSpins_]

I LOVE THE KYLIN V2 its my second favorite in my big collection just because i think everything works without catching or anything else. I have the 11m pro which is my favorite 3x3 but honestly i think the 11m pro is better because #1 better quality #2 better stock

[@4me2ndtwin]

Have 2 of these, one black and one transparent, they r really good and definitely worth the price ! Hope SCS gets them back in stock soon ! I want to get a few more...

[@georgelangley7049]

Mitchell Johnson I know you will probably never see this but I was thinking of getting this, would you say I should get the transparent or black one? Sorry it’s about a year late lol oops

[@4me2ndtwin]

@@georgelangley7049 Black 👍🏻

[@klulms1092]

I bought a Kylin V2 M a year and a half ago when I just started with cubing. I got it from Amazon for about $21 and if I did even a little bit of research, I'd have found out that you can buy much much better cubes for $20. It was pretty good I guess and I used it for a couple of months before I temporarily quit cubing. A month ago, I started cubing again and the cube is definitely not as good as it used to be. I found a pretty good cube for a solid price, the X-Man Tornado V2 M for $20

[@SunilSingh-zp9wu]

I love how he shows the 17×17 in the end while saying"thankyou for always blessing us with ur low prices and we are forever grateful"

[@kevinstrand4596]

I got a Kylin V2 M (in black too :D) and I'm loving it so far. I have a GTS2 (not magnetic) and I prefer the Kylin which shocked me at first. The Kylin was quite tight out of the box but it got way better with some loosening and time. I don't have an MF3RS3M to compare it to, but I bet it's going to be facing some serious competition with the Kylin.

[@DavidN4242]

Kevin Strand which do u prefer now the MF3RS3M or the kylim V2 M?

[@Skivv5]

I currently have a basic nexcube from walmart. Thanks for the tips!

[@vibhanshupathak3622]

You are the best J perm Edit:Thanks for the like j perm I learnt everything from you

[@arthurchase7716]

i have this cube and i really like it, there are probably better cubes that have come out since i got this, but i really like how it’s not uncontrollably fast but still smooth, and the magnets aren’t too strong which feels really nice

[@eggelille2222]

You should have 1 million subcribers

[@chaparritocuriosoyguapo4367]

Thanks jperm for telling me I’m going to use your code

[@kherdental7543]

Such a great video! I love your videos, J perm!!! Keep it up!

[@manaskumarbera1260]

I just love your channel. Keep making this videos. All the best.

[@eli14e]

thanks for these reviews I just made a 14 dollar purchase on the cubicle I got like 4 budget cubes, I'm a beginner so its fine and I really appreciate you telling it like it is lol I guess I'll get expensive ones when I get better

[@Brewer_]

I ordered this as my first ever cube. It should be here tomorrow!

[@bradeureruwoan8288]

next will be a 4x4 tiled color cube yuxin kylin v2m,hope not too lock up

[@hacpoa_agent_143]

if you intend to use the yuXin Kylin you will need a extra set springs and alot of lube i have had the yuXin Kylin for over a year now and i have found that the core was really dirty and i would have to clean it often and the springs has bent so i have change the springs about 2 times now and they keep bending I have also got a yuXin little magic that does not have this proublem so i believe this is the cubes fault this is not a rant about why you should not buy this cube its a good cube honeslty but if you are gonna use it take care for it by lubing it properly and buy an extra set for springs for this cube

[@visalsngg]

transparent cube actually kinda looks cool (i never got one)

[@papadank1972]

whoever is scrolling through the comments, hi

[@nathanaelmorgan8604]

hi

[@JPerm]

hi

[@bruce1170]

hello

[@t0mkatabilkarq838]

hi

[@bruce1170]

hi

[@Jeremattress]

Yuxin: we can make good cheap cubes YJ: Hold my magnets

[@CrazyForCubes]

LOLL nice one

[@bradeureruwoan8288]

the sense of "flat surface feel" tiled rubiks cube,but sometimes a lil bit locky snapy corner cut even by loose the tension with proper lubing,don't loose the tension too much..you will be struggle by corner twist

[@romanchicken79]

Also, the MF3RS2 M would be a good choice for black plastic except you have to pay extra like 10 dollars!!!

[@cubedcommunities_mn3242]

I too bought the transparent version because it reminded me of the transparent cubes I bought back in the day (like 2010?). I haven’t lubed it, so after 50 solves on it, it reminded me of how soft transparent plastic is. Not sure which lube to use with it that won’t make it worse.

[@zachbear]

Do an AVG of 5/12/50 on all your cubes, to give a ranking of which ones perform best for you.

[@bradeureruwoan8288]

the best "eternal sticker look" combine with a little bit smaller than the standard size to these cube. so please yuxin.. when the kylin v2 magnetic in 4x4 version will be created,hope it was smaller than standard size too 😊

[@CubingEducation]

About the GAN 354 M to fix the catching use a thick lube and break in them add a piece lube such as Marcian, Nebula if two slow I speed it up with DNM-37 but I would guess Marcian does the same.

[@Flem-to5nk]

Aww...I was really excited when you mentioned the MF3RS3M since it's my new main and first speedcube. Well, I guess I need to wait then. 😅

[@HaloNeo2000]

i have a supernova mf3rs2M

[@bentesyoutubekanaal9247]

I got this cube a few days ago as my first magnetic speedcube

[@vijithasanoj5335]

So is kylin v2 m is better than thunderclapv3m?

[@4.1.8]

I have an aolong V2 should I upgrade? Doesn't have to be budget any cube

[@JPerm]

yes. magnetic cubes and the newer models are much better.

[@adobngpusa4481]

Gan 354 M

[@4.1.8]

J Perm any suggestions? Top 3 I average 40 seconds and I don't cube every day

[@JPerm]

check out my speedcube tier list video and see which appeals to you!

[@4.1.8]

J Perm OK thanks so much

[@djpyramidz3756]

I bought this puzzle strictly because of tiles. I love the look of the black plastic and stickers but hate how quick the stickers get ruined. If a flagship was made of tiles id buy it without a second thought!!

[@nitroexfusion6665]

Jperm should teach a family member roux method👌for no reason

[@dastarkhwan1277]

Thanks j perm for making this video I really buy I cube

[@injeraa]

I just ordered a qiyi warrior W cube and an ivy cube 👌

[@loyalcuber9672]

Whats a flagship cube?

[@canhtran68]

My main right now is the Mf3rs is this cube good for new main

[@doyouthink4269]

1:28 Did you do a U Perm with M moves?

[@JPerm]

yes, check out my PLL video!

[@champ10ns08]

I truly love our vids. They are pretty special each and every one of them. You are absolutely and 💯 Love ya dude 😍👌

[@psycho0238]

When he said that’s for next time. I cried a little.

[@deathseye5899]

21 minutes and 925 views,damn you're getting popular

[@perfectsledge585]

Kylin V2 or Little Magic M regardless of the price?

[@JPerm]

little magic M

[@perfectsledge585]

@@JPerm thank you bro

[@AlfredSpeedcuber]

Yuxin must release a v3- with stickerless version, stickered not tiles and better performance

[@beatsado6529]

Hey J Perm! I was wondering if i should get this cube. Right now, my main is the MR3RS2 non-magnetic, so I was wondering if I should upgrade to this cube.

[@mr.underrateddarryl2154]

Kylin v2 m is probably the best budget magnetic cube

[@twistiicuber1055]

Facts

[@bensilashi3182]

Hey Jperm! How would you compare this to the Little magic M? or in general, where would you place it on the lovely graph you used in other videos ( in regards to speed vs. mag strength)

[@JPerm]

it's slightly fast with average magnets, but I think the ylm m is better

[@bensilashi3182]

@@JPerm Thanks! :)

[@bensilashi3182]

​@@JPerm Had it for a week, feels really nice! def blockier, but the magnets do more work than I thought. Thank you for helping me choose! :)

[@pranayverma3816]

Hi, I love your videos! I have just started my quest to learn full ZBLL. Do you think it might be worth the pain if I know VHLS too?

[@JPerm]

hmm a lot of VHLS have rotations, I feel like if you want this route you're better off doing VLS+PLL instead of VHLS+ZBLL. it's the same idea where once you reach a paired last slot, 2 algs solve the cube. the difference is VLS has fewer algs and is easier to recognize

[@pranayverma3816]

Thanks! I will definitely give it a try.

[@SeppoTaalasmaa.]

Probably gonna get this =) I have the little magic rn as my first proper cube, and I would like to try magnets, so I guess this would be the one.

[@controversialcuber6018]

I currently have the original valk and am looking for a new cube. I want a magnetic cube that is less than maybe, $25. Which cube would you recommend? Btw, I like fast but controllable cubes.

[@nestly1103]

Controversial Cuber Me too i have the valk 3 m but is not for me I Prefer yt mgc in the valk I get lock ups and pops y get my finger into the corner and that annoying I get the yj mgc is my main now need set up and break in

[@controversialcuber6018]

@@nestly1103 ya those problems happen to me on the valk too! AND thanks for the suggestion. But, a lot of people say they dont like it so im not really sure...

[@JPerm]

fast but controllable sounds like gts3m and little magic m

[@controversialcuber6018]

@@JPerm ok thanks!is it hard to apply magnets to a cube myself or should i buy a liitle magic thats already magnetized?

[@nestly1103]

Controversial Cuber Yeah I try the weilong gts3 M and it feet’s my style. but is to expensive for me :3 (is easy to put magnets in a cube) really but take a lot of time

[@boulderingguy3761]

thanks for this review, bought the cube and got a new 27.56 second PB!

[@ayushvispute4204]

Is it better than the Yuxin Little Magic? I'm planning on ordering a cube and I'm in between these two.

[@CH-xh3lp]

Should I get the Kylin or the RS3M

[@rileycooper3700]

that 749 dollars is cheap XD cant stop laughing 0:08 at the end of the second

[@JamieCuber]

I haven't got it yet but I want it badly!!!

[@ajinkyakarnataki743]

dude you are the best cuber

[@manaskumarbera1260]

Hey j perm what do you think about the weilong wrm. Do you think it will be your new main.

[@JPerm]

it's not out yet

[@thegoofycuber4765]

The fact that you got it in transparent though xD

[@twistiicuber1055]

Lol ikr

[@eternalrewind2190]

Looking forward to the mf3rs3 M review.. got one a week ago.. it's pretty good, kinda blocky..

[@markokrstic6629]

I have Yuxin Little Magic,and it is a really great cube ! Even a beginner like me feels a huge difference between this one and a normal cube you can get at every small shop. So i was thinking to get another one...Can you suggest me what to get since I am a beginner...Another 3x3 or some other event..or should Little Magic be enough for now ?

[@JPerm]

if youre a beginner, little magic should be fine. try learning 2x2 or 4x4!

[@markokrstic6629]

@@JPerm okay! Thx

[@markokrstic6629]

Btw can u suggest me some 2x2 or 4x4 cubes you like?

[@JPerm]

my mains are the valk2, gts3m, aosu gts2m

[@JPerm]

the best cheaper ones are the mgc 2x2, mf3rs2m, wuque non-magnetic

[@loganpaschall4333]

I think we are gonna see a lot more budget magnetic since the shenshou mr m go get one btw awesome cubes

[@potatobaker424]

0:40 Thank you to speedcubeshop.COM!!!

[@namankumar9099]

Can u make 3style bld method tutorial

[@YashBudhiraja]

How can he make a tutorial for something he doesn't know?

[@omarsorin4842]

@@YashBudhiraja maybe he did not know he does not know

[@tarike5613]

but if I already have a MGC should I buy this one??

[@DRKongo-vi8ok]

Tarik Ramadani why not but it wont be your main

[@technospyform1578]

Do the Gan-like stickers make it faster?

[@empputrubaduu4725]

When will the mf3rs3m review come?

[@larsm1920]

Big upgrade from shengshou legend? :) Worth it?

[@JPerm]

yes

[@larsm1920]

@@JPerm Thank you! Much love ♥️

[@shobhanalage4803]

What do you think about weilong gts wr m please make review video on gts wr m as soon as it released

[@cubert8880]

hey there!

[@zelnyte]

mf3rs3m review soon? and will you review the valk3 elite or moyu weilong gts wr once they come out in the future?

[@JPerm]

yes I plan to review all major cube releases

[@pauldima9402]

They need to design glow in the dark speed cubes for those like me who live in a cave...

[@marktripple2396]

z cube has one... there is also a glow in the dark qiyi mirror block

[@sanjibmohanty1856]

Dude u should really make a video on magnetising the almighty yuxin little magic

[@hopelesssoap]

I'm gonna upgrade from a MF3RS2M, which one of these cubes should I get? Dayan TengYun M Gan 356 R (and then magnetize it) Moyu Weilong GTS3 M

[@Parapeth]

GTS 3m or TengYun imo

[@DRKongo-vi8ok]

Gts3 or tengyun

[@nestly1103]

Gan rm feels like an sm you need really strong magnets

[@hopelesssoap]

@@nestly1103 A Gan 356 R is just a 356 X without magnets. It's 17 dollars.

[@nestly1103]

HopelessSoap Cubing don’t think that you gonna be so mad when you try it

[@mitchellleske7714]

You should do a review on the yup wife p.o. 2x2

[@ravishankarrana1751]

@jperm what is your laptop model i really like your laptop 😂😂 ??

[@omni673]

The only problem I had is with the magnets. I dont know if it was my cube or for everyone but the magnets weren't the same strength on all sides

[@user-ny7xh3gr7m]

Should I buy the Little Magic M or the Kylin?

[@andyhoette3674]

How long have you been using that session on CS timer

[@zayitsiege4028]

What about the shengshou Mr. M

[@youngsublee5031]

Can u make video of how to deal with non cubers

[@JPerm]

treat them nicely and don't make cubing seem impossible or unreasonably easy. just roll with whatever interest they give you

[@youngsublee5031]

Ok thanks for replying but people ask me if they can use my cube and when i say no they say it is just a few dolor cube and i say it is $40 gan and they say i got rip off what should i tell them?

[@JPerm]

tell them about there are speedcubes vs regular cubes, and speedcubes cost more

[@JPerm]

then show them corner cutting

[@youngsublee5031]

Ok thanks but i already tryed that 😭😭

[@diamondDog_629]

Which is better, this or Little Magic M?? Thanks

[@Mp4player.]

I know I'm late but this isnt on the website as far as I cant tell but is there a difference between this one and the magic one?

[@dajamaldrip1611]

Yay rs3 m review

[@coffeetable8594]

Twisty Cuber where u at? !

[@synamitegamer7407]

Dude you said to use speedcubeshop.com Not speedcubeshop

[@pee9070]

This is Clearly better than my cube.

[@brettcannon6051]

I really like cubing, but I haven’t been into it as much anymore, how do I get back into it

[@chriskunce3331]

I prefer black with stickers. Which rules out the gts3m.. so which would you prefer MF3RS2 M or GTS2 M as a first magnetic? Regardless of price. Just which is better?

[@JPerm]

I prefer the mf3rs2m since it's more controllable

[@chriskunce3331]

Oh wait. I just realized there's a mf3rs3m. Those numbers get confusing. Hmmm. Maybe I should wait until your next video before ordering...

[@meirellestkd2769]

Do you consider it an improvement to someone that uses a little magic m?

[@JPerm]

nah, little magic M is better

[@meirellestkd2769]

thanks, do you have any recommendations for a better one?@@JPerm

[@JPerm]

gts3m or gan x

[@meirellestkd2769]

thank you so much! didn't think you would actually answer :D you're the best@@JPerm

[@TimofeiKouranov]

If anyone is wondering how the mechanism looks, how the magnets are secured (witch by the way, use a slotted magnets design like in the Gan Air SM), and how ist compares to the YuXin Little Magic, I have an unboxing and in-depth first look and comparison of the Kylin V2 M on my channel!

[@sebb3705]

Do you have a review on the supernova Valk 3 M?