Yuxin Kylin V2 M Unboxing and Review! | TheCubicle.com

[@joshpescie1553]

This is probably the golden age for begginer cubers.

[@laloangels9366]

Totally agree ,no more only bad cubes for beginners a bunch of variety

[@bobateacuber7646]

I'm sad that i'm now a intermediate

[@blizzzey6477]

@@bobateacuber7646 what is intermediate for you? i started in febuary 2020 and now im getting sometimes sub 20 and mostly around 25 seconds? is it intermediate for you? or still beginner?

[@spytego6004]

@@blizzzey6477 intermediate, I am sub 30 :)

[@skull123]

@@blizzzey6477 That's probably still beginner, if you are consistently sub 20 then thats intermediate

[@visalsngg]

oh look, a new video by JRCuber

[@geethakochukunju3757]

😱😱😱

[@emilipesta4700]

acy yuh

[@Adrian-yw3iq]

*Ohh look another comment by acy*

[@visalsngg]

Adrian Solano you recognize me?

[@Adrian-yw3iq]

@@visalsngg maybe

[@3juliano680]

i stopped cubing a little while ago, think i might buy this to get back into it

[@SkeletronGames]

K, Don

[@ylsab2977]

Good for you, don cheadle

[@microwave911]

LETS GO MATE

[@papadank1972]

I realized that a few of the cubers are making the video on the kylin v2 on the same day

[@OlgaFyodorova]

I have just the same experience with this cube. It seems best without lubrication - which is in fact good for the target audience.

[@thecubingworld3943]

3:23 nice trick

[@ariffansar4994]

I see you have a MKBHD t-shirt on. Man of culture.

[@deadringer-cultofdeathratt8813]

Ariff M Ansar right

[@samborinsky6251]

Lttstore.com*

[@daudmalik1898]

that 4k camera quality lookin clean

[@nanfees7036]

And also 60 fps. Nice quality!!! ;

[@wonton9503]

It’s actually 1080 stoopid

[@wonton9503]

On KZbin you can only watch in 1080 u stoopid

[@TheAwesomeMiner99]

DA Destroyer actually you’re stupid there are tons of 4K videos on KZbin. In fact there are even some experimental 8k videos.

[@pavo4461]

@@TheAwesomeMiner99 lol dude. These dudes are really dumb tthey are stuck with there 1080p monitors and thinking that there is no 4k in KZbin atall 😂😂😂

[@jacobs422]

Hundreds of solves and it didn’t slow down I’ve had this for more than a month now.

[@houndz4175]

Did you lube it

[@shediakh4210]

What lube did u use?

[@leviathan2303]

Jacob S mine sucks for some reason out of the box and later on it sucks

[@brainleeiacsworld3339]

Kylin? No. Collin? Yes!

[@blablabibi7037]

It should be pronounced as ky(key)lin(lean), but it's ok .no one's perfect😊

[@harrelsonyee4467]

I thought is 麒麟

[@islanisakzhanov6962]

your stupid

[@islanisakzhanov6962]

kylin

[@DepFromDiscord]

шукурбек кушбеков you’re*. Who’s stupid, again?

[@cosamic3740]

I remember watching his video when he was like 13😂

[@nabranestwistypuzzler7019]

4:47 You can also get it in transparent, so there will be transparent borders instead of black ones.

[@Taikamuna]

Wow, he is fast

[@liamturner5201]

Taikamuna I see you everywhere lol

[@RummanNaser]

HOLY SHIT IT'S TAIKAMUNA

[@LynkzOverdrive]

Haha, I see this guy on EVERY channel I watch lol

[@leech7412]

you are on every video

[@doublecheeseburger2449]

Taikamuna joo niin se on

[@leech7412]

Your thumbnail seems oddly similar to J perm's video of the Yuxin Kylin V2

[@thomaskrauser9341]

PixelMation 🤣🤣🤣

[@rvke5639]

hahaha just noticed that

[@HakemzOfficial]

3:15, When you are solving a cube, then your girl texted you to come home.

[@fulphilling8728]

I LOVE the new style! Unboxing and review all in one works great! Keep it up!

[@thorium522]

The Kylin v2 m is my current main. I average sub-25. The corner stalks may be too thin because my friend had one and broke the piece off.

[@sawyerbean5611]

I bought this cube and I like it when it gets to that used stage

[@rbm8991]

I like tiles cause you don’t need to worry about scratching off stickers, then having to buy new stickers

[@chabidas1976]

your speed is really very fast.mind blowing.

[@stoneps]

Whenever I wonder when some slightly inconsistent KZbin cuber will upload again, they upload like 3 hours later... Wait.... *goes to TPC’s channel*

[@vidinh8366]

reaally enjoyed this new setup of unboxing and review all in one

[@gabe5865]

Definitely liking a full review in the unboxing.

[@a-borjacarljosephn.5020]

First Turns starts at 1:28

[@benbaron8951]

Loved the unboxing + review style!

[@manshitrivedi9138]

Finally!!! A new video

[@cculeee]

You posted this video in 2am in my country

[@manuelsinchi909]

You finally posted!!

[@junting605]

YuXin never fails.

[@Coopertrooper47]

Ah what do u know, when I start getting back into cubes you upload

[@swagaliciouspanda4909]

The unboxing and review in one video is great!

[@jacobcubing606]

PLEASE solve the petaminx my OCD is killing me!

[@mayzou3997]

U mean kylin you haah

[@theomnivert]

this new style is better than the experiments you did in last few months

[@tumama5321]

He finally returns

[@ds2td]

Looks like I found my first speed cube!

[@whatever4053]

same here!

[@shuochen1689]

Best unboxing video ever!!!

[@matthewwilcox2055]

0:04

[@lightningcreates1271]

The Cubicle’s website is .com not .us. That’s what he was pointing out.

[@maybeoptify]

The Lightning Cuber it was probably still us when he posted this tho

[@megiatrix1803]

Just got this cube today

[@nabranestwistypuzzler7019]

Are you going to solve the Petaminx, and it shouldn’t take too long because it should only take a few hours, you’ve twisty puzzled for more than 4 hours at a time before, and you can always just do it little bit each day like 1 center per day, or even just one center bar. Also, you should solve the 1st 6 centers on the bottom first, then build the Star and F2L edges while inserting them along with the corners. Next, solve the Last 6 centers, Last 20 edges, and finally Megaminx Stage starting with S2L. You can also do a Balint and then Yau5 style for L2E by pairing the bottom 10 S2L edges while inserting them along with the corners, and then solve up to 3 S2L edges in the back while also inserting the pairs.

[@zzpz]

Tiles are really cool for certain modifications (like custom blind cubes) I have a Rubik's brand custom blind cube but I might remake it with this if I can get my hands on one

[@mingistech]

Awesome MKBHD shirt man. Awesome review too.

[@Vale-gz3mu]

Is it still ok if i dont open it and dont oil it or smting like that???

[@goblinguy8721]

I think the review inside the unboxing works.

[@octaii207]

Dis will be my new main currently waiting for it in mah mail

[@coopertropper9919]

Nice vid as always JR keep it up

[@donaldskerratt4016]

You uploaded on my birthday! Thx dude!

[@junting605]

Yuxin is known for magnetic cubes definitely!!!

[@sebb3705]

i just looked at your old videos.... puberty hit you hard lol

[@nabranestwistypuzzler7019]

blue cabinet How would you know by looking at them?

[@sh3vski543]

I got mine from speedcubeshop.com and it was really nice didn't lube it and did over 200 solves on it already didn't slow down

[@hihihihi3806]

Nice

[@shediakh4210]

Any updates on the kylin?

[@bright_carson8306]

Your not dead!!!! Yey!!

[@ritwikaggarwal2841]

I see you with your mkbhd merch

[@zameer6789]

finnaly i was waiting for your new video for weeks finnaly its here cool

[@Smishnu]

Pretty cool that you're repping MKBHD!

[@SoheilLotfi]

Love your mkbhd merch Tee

[@MeRThiYTgamingCS]

I was legit thinking about when you would upload a new video and than notification

[@cubingmarvel5880]

Great new way of making vids!

[@Trumpophone7]

Wait what a YuXin 3x3 that’s too slow?

[@ilovedoritosandmountaindew3569]

Trevor King I have it and it’s really fast

[@omarsorin4842]

@@ilovedoritosandmountaindew3569 should I get it over a Yj mgc v2 (m ofc)?

[@ilovedoritosandmountaindew3569]

Un Cineva I like it it has a medium magnet strength just use a thick lube on the piece stocks from time to time if it gets too fast

[@ilovedoritosandmountaindew3569]

Un Cineva idk much about mgc v2 tho

[@omarsorin4842]

@@ilovedoritosandmountaindew3569 oh, thank you very much, I may probably even use light lube since I like my cubes *real fast*

[@parkermorris2531]

I have that cube and I really like it and it isn’t a problem for me

[@marsomatic639]

why, why do i always stop the vid in the funniest moment

[@hywoncha-music7153]

Love your vids, man! Keep it up!

[@kagiazzm8640]

This is my first magnetic 3x3

[@tylerhan4310]

Hey JR Cuber, you’re probably not going to read this, but if you do would you mind making a video on the best budget 4x4 cubes?

[@tylerhan4310]

Ok thx the gaming cuber

[@muchengliu]

Zmore legendary review from jrcuber

[@carllindgren7130]

I use a mix of dnm37 and Luboss (from Cuboss.com) and I got it fast and reliable.

[@kimjitae5273]

ITS ALWAYS OUT OF STOCK WHEN I WANT TO BUY WHAT JRCUBER USES!!!!!

[@ValtteriHakio]

Nice video! The fact that you deleted the unboxing of the dayan doesn't bother me if you just tell what it felt like and what were your first impressions.

[@doge_slayer9841]

I can’t even solve a cube but I bought this

[@letienthanh7583]

Your camera is good

[@peterdeep5170]

It's good, but the center caps are really hard to take out and the pieces break and bend easily

[@bbinc7912]

What method do you use to solve? I know how but it’s a beginner method. Do you have a tutorial, if not I would love to see you make one.

[@franklinkevin2882]

Should I buy the Yuxin my pin v2 or the Yuxin little magic m ?

[@thecubingshelf9331]

Yep. This is my main but lack of corner cutting and speed are big problems in this in my opinion

[@Coolms9]

TheCubingShelf loosen it and it will corner cut and have speed

[@thecubingshelf9331]

@@Coolms9 I have tried it before. It does not really corner cut any better or become faster. I need to try even looser I guess

[@Coolms9]

TheCubingShelf make sure all sides are loosened equally or else it will feel weird

[@thecubingshelf9331]

@@Coolms9 I re loosened it and it now is better. At least for the speed

[@deffonotluke]

Just purchased it

[@rodrigodiazabal2388]

Comparing with a magnetized little magic? maybe if you magnetized yourself you can get a similar price. For intermediate cuber is better this o the little magicM? Congrats for such a interesting review

[@StevenWintringham]

IMO a magnetic little magic is better than this but they are both awesome

[@rodrigodiazabal2388]

in some shops it has a similar price or a 3 usd diference with the mf3rs3m or the mgc v2M . they are similar? or we are talking about a different range of quality?

[@StevenWintringham]

@@rodrigodiazabal2388 I would recommend the rs3m over the mgc V2

[@rodrigodiazabal2388]

everybody keeps telling the same, i almost bought the YJ last week in a e-shop. Here in argentina the cheapest mgcv2 is near the 40 dollars. The moyu like 35usd . completely madness

[@StevenWintringham]

@@rodrigodiazabal2388 that is ridiculous! In the United States they are only about $15

[@MCubes]

So it’s like a yuxin 3x3 and the little magic combined

[@ryougi673]

Is this a good cube to pick up for someone like me who never got the chance to use a magnetic cube? Last time I cubed was back when Valk3 released and there are just so much cubes coming out rn

[@hunterruiz8090]

Love your vids I liked and subscribed with notifications

[@chrisdearborn3722]

Hi, JRcuber!!!

[@danman2897]

i was planning on getting this rubix cube brand but my friend said i should get this rubix cube and my friend felix holds the world record. but this Yusheng du dude apperintly broke it.

[@dastarkhwan1277]

Sir this is really amazing

[@felicedibenedetto4634]

How much should i loose it out of the box? Half a turn for each side would be good?

[@Mpeos]

Where are Jaunary's and February's puzzle crates?

[@damodardhungel7560]

Is it better than gan 356 air s ? P,ease reply

[@avinashcuber5082]

You will recommend this cube to buy

[@supa_Mcnugget]

Could you do an unboxing on the factory magnetized mf3rs? I'm thinking about getting it for my b-day and I would like a review.

[@v_ad2162]

Get the MF3RS2

[@adityasetty324]

Is it a magnetic cube?

[@rainorthios8674]

Adityasetty 4488 yes

[@feisalalhamoud3797]

Where can I bay it I am in Germany please help

[@vishalpranao7238]

Why ur not unboxing most of the flagship cubes which came few months ago.

[@deleteduser5162]

Is this better than a gan 356 air? (Not sm I'm talking about the original)

[@hibro6422]

where is the list of all your cubes???? just wanted to know since it has been a month and a half and i havent seen it in any of you video descriptions,

[@nabranestwistypuzzler7019]

hi bro Yeah; same

[@Shadow-ge4ji]

What is that thing called that he uses to open his packages

[@SirSticker]

MOTION BLUR! MOTION BLLUUURRR! how are u so fast on cubing.

[@bouncyspring6274]

Practice

[@markokrstic6629]

Is it possible that i bought Yuxin Little Magic and got a cube just like that one...Same "logo" on it

[@RohitRagnarok]

Watch this in 720p 60fps you loved this

[@somebodygaming4949]

2:32 - 2:40 that’s what she said

[@quinn8180]

Can you make a vodeo on how to be sub 20 on 3x3?

[@harry-kw7dj]

u back

[@myguy4w164]

Hey JR, im a beginner cuber and am trying to get my hands on a GTS3M. I know it sounds dumb for a beginner to use it. But I was wondering whether of not some traxxus my dad has laying around would help. If so, should I use it for core or pieces? Thx

[@vanshverma2089]

Yo tho Im too late. It depends on the type of lube. If it says traxxas 50k then use the lube for core if 10k then use it on the pieces if 30k use a bit on both.

[@deleteduser5162]

What do you recommend to lube it with?

[@defnmi]

As a new cuber with a pb of 54.7, should i buy this for my new main? my current main is a warrior w and i want a magnetic cube, should i buy it? thanks.

[@asdfkaasdf5978]

At that speed anything that turns without getting caught frequently will last you a long time. U might want the yulong v2 m as a cheaper option, if only by a few bucks. Seems more long lasting.