10 in Z bars install on a 2008 Sportster Custom. Along with 'low profile' license plate mount. Sorry for the shakiness here and there! I am working on getting better camera gear so please bare with me.
Пікірлер: 60
@ChaplainMike7777 ай бұрын
Great video! That helps a lot. Just bought a 2015 1200C. I really don't like that ugly riser and it is going away. In the meantime I need to start collecting parts before I take things apart. Congrats on the Dyna although by now you could be riding something much different.
@libioprado12058 ай бұрын
Hola que buen video yo tengo una sportster del 2005 y tengo problemas de espalda con el manubrio original , de que medida es el nuevo que le pusiste , y como lo has sentido en el día a día ? muchas gracias por tu tiempo y saludos desde la ciudad de México.
@Nwclaassen113 жыл бұрын
What risers did you go with for the z bars/ speedometer housing?
@AlexandreFerreira-qz9zy2 ай бұрын
From where Did you get the speedometer housing like that? I can’t find
@gannongarcia16376 ай бұрын
What kind of speedometer housing did you use? all I heard was a low. Was that for the low or like from a Dyna low
@beardedtater6 ай бұрын
Sporty Low
@RCworksvids4 жыл бұрын
ive just done that same riser swap on mine. that wiring harness with the right dummy lights is $309 here in australia! i couldnt believe it.
@beardedtater4 жыл бұрын
😬 steep price!
@Sidneybeach8753 жыл бұрын
Hey man, just subscribed. The bars look great.I have a 2016 xl1200c. Before i grab a set of 10 inchers, what if i got 8 instead? Do you think i would need the extended break line? Also, would i even get anything from the 8 inch zbars? Side note, i have a windsheild and a bag on it. The original speedo is perfectly out of the way for the bag so hold onto your o.g. speedo.
@Scooter31942 жыл бұрын
I have 8” Z bars on my 2009 xl low sportster and NO you don’t need to replace break line
@Sidneybeach8752 жыл бұрын
@@Scooter3194 I did the install, had no issues.
@hs73824 жыл бұрын
How did you adjust the odometer reading on new speedometer ?
@beardedtater4 жыл бұрын
Hey there, you would reuse your original speedometer. Only the housing and riser set up is different.
@bernharddahl71302 жыл бұрын
Hey! Do you think the wire harness would be long enough to use with 9 1/2" risers?
@Scooter31942 жыл бұрын
I have 10” apes on my 09 sportster didn’t need any cables just undo the bracket holding your brake line it’ll stretch enough to reach
@ryanbernard97484 жыл бұрын
Hey man. Was it just the brake line you needed? Badass looking bars🤘🤘
@beardedtater4 жыл бұрын
Aside from the other odds and ends only the brake line was needed as far as cables yes, thanks!
@octaviodiokno4667 Жыл бұрын
awesome bike
@djjensen10795 жыл бұрын
Great bike man! I have the same one, but 2009. I also hate the stock risers. Can you tell me where you got the risers you used along with the brake line? Thanks in advance, keep the rubber side down!
@beardedtater5 жыл бұрын
Thanks man! Sadly I traded her a few weeks after this. Currently rocking a dyna bob! I got the stock riisers and Speedo housing from a local off craigslist. It is the setup for the other models such as the Sporty Low. You have to buy the wiring for that setup too as it's different from the custom. If you shop for a bit you can find them on ebay, craigs, forums. Getting the full setup and for the right price is the trick.
@samciccarelli24354 жыл бұрын
Thanks for the video! Which hardware did you use for the new speedo and risers?
@beardedtater4 жыл бұрын
Thank you, same bolts from stock fit.
@samciccarelli24354 жыл бұрын
@@beardedtater Thank you man! One more question, when installing new speedometer, did you just plug main indicator cable into where the original was and the data transferred automatically? Or did you have to transfer Speedometer info separately with data link cable?
@beardedtater4 жыл бұрын
@@samciccarelli2435 you use the same speedo...it's only a different housing for it and you'd need a different indicator bezel and cable that fits the new housing
@samciccarelli24354 жыл бұрын
@@beardedtater Thank you so much man I appreciate it!
@jaydengonzales57925 жыл бұрын
Hey brother Nice bike what brand handlebars are those and how much was the Speedometer seals and the chrome backing plate ?
@beardedtater5 жыл бұрын
Hey I either got these from Licks Cycles or JP cycles. Make sure they're dimpled for wires if you're running stock controls. The rubber pieces were about 10 dollars each and the backing plate came with the Speedo mount I bought off craigslist local got about 50 bucks
@jaydengonzales57925 жыл бұрын
How much was the wiring harness for the mount from Harley?
@beardedtater5 жыл бұрын
@@jaydengonzales5792 the harness I picked up off ebay I believe wiith the light bezel. Parts like that can be found on there. I only got the rubber pieces from harley for the Speedo.
@devildog74602 жыл бұрын
Does anybody know if I could use the stock speedo with just some shorter risers, or will the speedo hit the tank? I dont plan on doing a tank lift as was done in this video.
@robertbelote52734 жыл бұрын
Where did you get the license plate bracket? Thanks for this video.
@beardedtater4 жыл бұрын
I missed this comment, sorry! I can't recall exactly..it was a flush mount that fit my model. They're pretty easy to find online.
@baltazar98655 жыл бұрын
What cable harness did? you buy at the dealer and what speedometer Mount did you use from what bike?
@beardedtater5 жыл бұрын
Hey there, sorry for the very late response! I haven't been on my own channel in some time. I purchased the speedo mount and risers from a local. They were off of a Sporty 48. If you replace the full riser set-up with 1 in or higher Harley stock risers and get the forward mounting speedo housing/top clamp you can transfer your speedo over and will need the indicator cable that fits that housing. I don't have the numbers written down but I located this info off of a Harley forum. I'll do better to provide these details for future videos.
@tonee6674 жыл бұрын
I have the same risers that lean towards you .. Can you tell me exactly what I need to get to move the speedometer and risers straight up just like this vid.. you mentioned finding one on craigslist but what exactly do I need , o, and the harness as well please
@beardedtater4 жыл бұрын
Hey there Tony, im kicking myself for not having included all part numbers I had found when I did this but they are simply the speedo housing, two rubber housing seals for the speedometer, and the bezel cable all from the Sporty Low OR 883 models of the same year range. You will need a longer brake cable. You can reuse your speedometer, your riser bolts. You will need the stock risers from that low or 883 model as well.
@cwelliver19854 жыл бұрын
The warning lights bezel is now obsolete and that’s the only part you can’t buy new from Harley. Your best bet is finding everything used on eBay. It’s been a nightmare trying to find everything I need and it’s definitely not cheap. Great video btw! I truly appreciate you posting this.
@tonee6674 жыл бұрын
@@beardedtater Awesome.. will the harnes on the pics from the link you just sent work on a 04 Sportster?
@tonee6674 жыл бұрын
@@cwelliver1985 Warning light bezel ? u referring to the indicater lights on the speedo that light up when in Neutral ?
@tonee6674 жыл бұрын
@@cwelliver1985 I got it now .. saw the pics
@alessandroiattoni16374 жыл бұрын
Hi man! thanks for the video...I'm looking for the same instrument support for my 883, but here in Italy it's very hard to find one. Can you suggest me a web site where I can buy it? Thanks!
@beardedtater4 жыл бұрын
Hey there Alessandro, the 883 models should already have the forward speedo mount, is that what you're referring to? What year is your bike?
@alessandroiattoni16374 жыл бұрын
@@beardedtater Hi! I have a 2006 sportster 883 custom...actually the same bike like yours and i'm looking for a new support for the speedometer
@welersonh Жыл бұрын
@@alessandroiattoni1637 Guerra custom, instagram.
@badboybootz84 жыл бұрын
Looking to do this mod on my 05. I hate that riser with a passion. Thanks for the video. What part of Florida?
@beardedtater4 жыл бұрын
Tampa Bay area!
@larrieking28103 жыл бұрын
I have a 08 Sportster. I want to add a 8in Z bar.do I need a kit?
@Scooter31942 жыл бұрын
You don’t need a kit for 8” I have 10” apes on my 09 sportster without any cables all stock just undo the bracket holding the break line from the frame by gas tank it’ll stretch enough
@masonhammond85362 жыл бұрын
What bars are these
@welersonh3 жыл бұрын
hello good morning, what model of the handlebars
@beardedtater3 жыл бұрын
Possibly the Harddrive 10 in Z bars from Get Lowered, but I honestly cannot recall exactly.
@IAMPROCAB4 жыл бұрын
what size brake line is that and where you get it from?
@beardedtater4 жыл бұрын
Magnum braided line. You'll need to measure for your application and how you want the cables to appear but it should be between 30-40 inches if I remember correctly.
@jaydatson42774 жыл бұрын
Cheers bud just picked one of these up perfect vid 🤙
@smalldoseofmeful4 жыл бұрын
Got that D104 air cleaner mod. Lol
@bobbaker95954 жыл бұрын
Anyone know what the rise is on the bars in video
@beardedtater3 жыл бұрын
Sorry I do not monitor this page much anymore, they're 10 in z bars
@bernardlesperance7422 жыл бұрын
Too bad you didn't take the time to show everything you did, step by step. Would have been much more informative.
@borjaavalos4952 жыл бұрын
Hi, where did you get the wiring with the indicators? I have a custom to and i can't find those. Thanks