Z06/Z07 Style Wing Reinforcement Support Bracket for the Non Z06 C8 Models I Sigala Designs

[@kennethberg7495]

Being in the composites biz, carbon fiber makes the strongest composite. Nice design on that bracket! Ordered mine a couple of weeks ago and can’t wait to get it!

[@Maximum1A]

When you first announced (along with the video) the Z06 wing for a standard C8 people were concerned because everyone knew the rear bumper was not strong enough to hold your new wing. And now, you showed the world a very innovative reinforcement solution. The engineering of that part demonstrates you guys not only have the engineering wherewithal you are on the leading edge of innovation and design! I am sold on your product. Congratulations and can’t wait to get mine!

[@NO1CAN007]

All my questions have been answered thank you so much... I definitely cannot wait to get mine!!!

[@Paff805]

Can't wait for it to get here!

[@mannys1220]

This is amazing guys. 👍 Well done on support bracket

[@fusiongt2010]

Good to know u guys dont just slap top layer carbon. Im in.

[@danluedecking5354]

The new Z06 wing is installed with some phone support from Alexander getting the bumper back in place. No template was needed to drill the holes. The install was pretty straight forward; just had difficulty getting the bumper back in place. The wing looks amazing on my car.

[@kalvin9861]

Any review on the wing? I noticed some small differences in the GM Z06 wing vs Sigala. The two post are less spread out on Sigala wing vs GM wing so didn’t know if that in turn amounted to less support to the ends of the wings so maybe that’s why I noticed all the flex and movement on the ends of the wing during their speed test. Just wanted to know if there’s any issue there or not? I want one but would like to hear a customer review please advise me of your experience so far.. thanks

[@danluedecking5354]

@@kalvin9861 I notice some movement in the wing when driving on the highway, but it doesn't concern me. It's mounted to the car and it's not coming off. It's a pretty cool view in the rear view mirror.

[@kalvin9861]

@@danluedecking5354 ok awesome thanks I’ve had my eye on this wing I think it looks the best I’ll probably end up getting the carbon fiber 1 thanks for the feedback!!

[@albertmaynard7439]

Great Job Alex and it was great seeing u at Carlisle.

[@_Car_Ideas]

Can you get this wing with black bolts or black caps, instead of silver?

[@dk9696]

Great video! Car is sick.

[@luckytravelvlogs]

Would this C8 Z06 wing fit a C7 Z06? This one looks way better than the ZR1 wings . Thanks

[@howardtran5904]

Hi there, I really like the look of your C8 Z06 C7 style spoiler. I currently own a 2023 C8 Corvette Stingray HTC and would like to have this wing installed om my car. I currently in Maryland. Do you have any authorized shop in Maryland, where I can purchased this spoiler and have it installed? Thank you!

[@SigalaDesigns]

Any local body shop would be able to do the install no problem. We are looking to see if we can find one of our customers in your area to find a good install shop. If you are interested in the wing you can place the order on our website at sigaladesigns.com

[@andrewdyer5822]

Incredible work! Any updates on when these wings / brackets will start to ship. I'm anxious to get mine!

[@SigalaDesigns]

Hope you got yours already 😎

[@mcbat8]

Is the wing in the video the actual production product or just a prototype?

[@vip_supercars3652]

What do you guys use for the holes for the outer post?

[@superameric8]

Check out their other video. They have a cover for the two outer holes. It looks pretty good.

[@chrismanning1171]

I think you need more support on the trunk side of the sheet metal where the carbon fiber mount is butted up to. I think over time as load is placed on the wing it might cause the sheet metal to flex and the bolts will lossen up. Place an aluminum plate on the inside of the trunk, as big as space allows to help displace the load. Use large fender washers and blue locate the bolts.

[@KSaw777]

I wonder if a lot of other people are having issues as well with that? Saw another guys video where his was wiggling around after install like it wasn't tight at all.

[@chrismanning1171]

@@KSaw777 yeah I saw that video also. Thing about this wing is that it was designed to fit a certain space on the C8. So it is not supported with wider spaced mounts like the z06 wing and that will cause alot of flexing. I was going to order this wing but changed my mind. I might go with the z06 style wing from C7 aero kits.

[@_Car_Ideas]

@@chrismanning1171 I actually just seen the video you’re talking about and I’m glad I did because I was about to order this. It’s unfortunate because it looks incredible

[@chrismanning1171]

@@_Car_Ideas Yeah it looks good but it doesn't look or mount like that of the Z06.

[@SigalaDesigns]

After shipping over 600 spoilers already. No one is having major issues with flexing. Total success. 😎

[@CoachRob619]

Is that a wrap on the Vette? If so, what's the color called?

[@SigalaDesigns]

Blue chrome

[@LamarWarner-bq8cx]

I saw this wing on a 4 post in Birmingham, AL and the guy mentioned that it came from Sigala. Do you make the Z06 style wing in a 4-post? 1:48

[@blackwidow3922]

Can this be used on the convertible?

[@noemi_-sz3eu]

EN ESPAÑOL PORFAVOR 🥺 SALUDOS DESDE URUGUAY

[@tcprovo5886]

Could you put that wing on the sixth Gen. Camaro?

[@alfredosebastianlarez8749]

Extraño los vídeos en españoll

[@danluedecking5354]

No template came with the support brace. When I tried to put the bumper back onto the car it won't go back on. It feels like something is preventing it from sliding into place. Not sure what to do?

[@Gee391]

When did you order your wing?

[@danluedecking5354]

@@Gee391 back in early August is when I placed my order

[@Gee391]

@@danluedecking5354 Did you ever your template and figure out what was preventing the bumper from going back on?

[@danluedecking5354]

@@Gee391 I talked to Alexander and he helped me over the phone. No template needed.

[@Motleymick]

FYI, On the GM Z07 wing the winglets are molded into the wing. No 2 bolts like yours.

[@marioandres9572]

Lo queremos ver en español, el o ella quiero quiera ver en español denle un like o un comentario

[@ghostspector3732]

Nice spoiler, what’s your thoughts on me installing it on my Toyota Camry???

[@SigalaDesigns]

🤷‍♂️🤮🤣

[@danluedecking5354]

I received my Z06 wing today, but the Z51 covers came unpainted; why? the rest of the wing was painted Red Mist Metallic as requested. not sure what to do now?

[@dwightmurray9763]

Will y’all make that for c7 zo6 please please

[@dirkcolas3046]

The road is made of asphalt not concrete

[@SigalaDesigns]

Good catch lol

[@alfredosebastianlarez8749]

En españollll

[@yahirvalded9769]

Hola primero