Z1 broke a 370Z NA horsepower record...+100HP

We weren't ready for this. Will Jackson brought in his 2017 370Z for a set of JWT C2 cams, Z1 Ported Upper, Z1 Ported Lower Manifold, Z1 Cold Air Intakes, a set of Z1 Headers, GTR Injectors, E-85, and a dyno tune to complete the whole package. To say we were surprised doesn't cut it. Needless to say Will was very happy with the results.
Z1 400HP Package
www.z1motorspo...
Z1 Ported Upper Plenum
www.z1motorspo...
Z1 Ported Lower Plenum
www.z1motorspo...
Z1 VQ Performance Headers
www.z1motorspo...
Tuning By Z1 Motorsports and UpRev Engine Management
--www.z1motorspo...
--www.z1motorspo...
Be sure to subscribe for more videos and updates!

[@cammando117]

This video just sold a lot of Greddy exhuast and C2 cams

[@doggystyledave]

Is this possible? I have not seen many breaking the 340 WHP mark. I think I need cams. WTF

[@curtiscollinsIII]

watch my newest video you'll hit 340 easy bro@@doggystyledave

[@DickVanNiggz]

doggystyledave happy dyno probably has a little to do with it lol

[@Qlassicrepresent]

@@doggystyledave Do you know how long it takes to change the cams on this car ? man it's over 30 hours for someone who knows what he's doing... If it wasn't of that, I would have done this on my 370z since a long time

[@pushhrodd01]

Qlassicrepresent over 30 hours? you’re dumb then

[@michaelmcclure6984]

This is why I recommend Z1

[@ctrsom]

how much is it to install the cams?

[@jimmydanc]

Its crazy how a stock LS with a $400 cam makes 100hp gains and this cost thousands

[@cantreid800]

And how much did that cost?

[@KpopNiDontStop]

Insane!

[@JeazyG]

Will you guys ever make headers for G37x? It not being compatible is the only thing preventing me and some other guys I know not pulling the trigger on buying them.

[@jawaunb8405]

Not a very cost effective decision seeing as how it would cost more money to make them which would make them more expensive plus the labor to install would probably be a pain which would reduce the demand. You could just buy a decent exhaust with test pipes and upgrade the final drive. You'll spend less money and have a quicker car than one with headers.

[@reedhoffman2889]

@@jawaunb8405 I highly doubt you would spend less money as changing the final drive means changing the final drive in the transfer case.

[@jawaunb8405]

@@reedhoffman2889 good point and that shit would suck. Neither of the two mods would be worth the money. Find a cheap stillen SC.

[@Will-xp6jh]

Contact SOHO Motorsports. They make alterations to the headers to fit. They were actually finishing a set up this week for somebody.

[@edwardcarballo390]

Need a Z1 shop down here in Orlando.

[@CORNERSLUG]

And the N.Y. area!

[@The_Hi_Life]

300 ft lbs wheel torque from a n/a VQ??? That's INSANE! Great job guys 👍. Never thought it was possible... These engines continue to amaze!

[@gwot]

Sasha from on point dyno made 361 lbft, and 537HP at the wheels in an NA VQ35. He also fitted an electric motor to it, making it hybrid 600+ total HP.

[@kieferj8058]

@@gwot Its amazing what he did to that engine. Tho cant compare it to this one since its extremely modified.

[@mikrowave1985]

@CDon2 - Not insane as my 04’ Non-Rev DE did the same. Dyno’d at 352/348 on 93 and 363/357 on E85 on a Mustang Dyno. Tuning was done with Uprev being wheel numbers vs. crank. Very similar setup except my injectors are larger, my gear ratio being adjusted to a G37, timing, valve train and torque converter upgrade, fuel, bolt-ons, etc. Like when I’m cruising Rev-Ups, HRs, Camaro RSs, and such are shocked. Long as you have a vision anything is possible. You just got to stay focused, ignore the doubters, and do you. 😎👍🏾

[@TheBb6prelude]

@@gwot that’s a one off build.. most people won’t see anything near that.

[@Strahlendersonnenlicht]

@@gwot yeah but that’s a fully custom race spec engine built by brian crower and JWT custom 1of1 crank shaft they’ve never used or reproduced, 15:1 compression ratio running 105+ octane. Sasha is a fucking god.

[@SpeedCultureStudios]

The 3.7 does sound great.

[@ZMCarsandMore]

Literally a 370 now lol. Thats like ~450 crank

[@Jaredscott89]

430

[@andywu8558]

Look I'm Zexy i have 420whp on my z, with this i can get 500whp

[@MarksTournaments]

Andy Wu ?

[@andywu8558]

Mark Rampersad im here whats up.

[@johnpob2486]

433.55 HP at the crank to be exact. =)

[@BigHeadClan]

Damn that's nearly 911 GT3 numbers, which is insane considering that the GT3 engine is a purpose-built motor and not a mass-produced engine. Not sure it really makes sense in terms of HP/$ given how much work is required to install the CAMS but that is some monster power for a pure NA motor. Congrats Z1.

[@talarcoj]

damn if nissan can just shred 200lbs or more out of this car it will be a perfect car to match the 911

[@BigHeadClan]

@@talarcoj We can only hope that Nissan refresh the Z platform this upcoming year. The FM platform has held up remarkably well but I'm sure they would have no issues cutting 200 odd lbs out of the car. That said the Z was always more a corvette competitor, and it really needs the new Vr30 engine to compete.

[@BigHeadClan]

@@cristianchavira8591The current version doesn't but go read up on your history on what the Z cars, because clearly your not aware of the 240 and 300zx.

[@huehuehue-x3c]

It's not even close to a stock 4.0 991.2 GT3. 4.0's come from the factory with 493 RWHP. Either way, you're comparing a front engine RWD consumer sports car to a rear engine RWD track focused car that costs almost 4 times as much as a 370.

[@BigHeadClan]

@@huehuehue-x3c Edit: For a 991.2 with the 4.0 engine sure, 420whp range is what most see out of the 991.1 and the 3.8L engine however. And yes I'm comparing it to that because it's impressive that a mass produced 3.7L v6 can get that close. Thought that was clear In my first post. Lol

[@HelloRenauldo]

In the famous words of Letty, Praise the car gods!

[@mindzeye270]

Fast & furios ja rule..

[@frontspring1]

I praise your mom

[@jayzeus9796]

Amazing! Man if I had the cash I would go this very week for this package

[@bigdogstreetperformance6761]

Drop it from 5 smoothing to 0 and you will probably gain ~ 8rwhp / rwtq.... The 5 smoothing just makes the curve look smoother / nicer. 0 smoothing is the true HP/TQ of the motor!

[@adamgraham6265]

If only this was CARB legal or California didnt care... KEEP UP THE GOOD WORK Z1!

[@SharkByteOfficial]

Fuck Cali laws, I have a twin turbo Z and no exhaust restrictions. Officers think its a "factory nismo package"

[@RLTW420]

SharkByte what’s your setup ? And are you a NISMO model ?

[@videomaniac108]

You're able to pass smog with that? Give me a hint as to what station that is that will do that.

[@SharkByteOfficial]

@@RLTW420 no base model with nismo rear and custom front

[@SharkByteOfficial]

@@videomaniac108 dirty smog. Just ask around and find one willing to do it for a little extra

[@Tunercraze]

🤯😲😲 Speachless!! You 3.7 owners have it made in terms of making N/A power. Great vid Z1!!!

[@davidgarza7168]

Are the GTR injectors from a stock application?

[@robertzamora5201]

david garza from an R35 550cc injectors a popular injector swap upgrade for both 350z and 370z

[@davidgarza7168]

@@robertzamora5201 Awesome. Thanks

[@johnpowers4076]

Ummmm.....what? Pull vids needed now lol. Absolutely insane numbers, almost 300wtq NA, holy hell! What’s the labor cost on the cams?

[@MelvinKhosa]

Labor costs would probably be expensive. I am guessing this is a 20-30hr job. Call them and find out.

[@johnpowers4076]

@@MelvinKhosa Yeah I remember reading somewhere it was at least 20 hours. That's a ton of money spent on labor but hey he hit the record so that's awesome.

[@MelvinKhosa]

Yeah well it was their own dyno which usually reads pretty high on the forums. We need to see a 1/4th mile run with this to see if its really making that power. Low 12's with a 112mph+ trap speed.

[@LuisRamirez-zi1nf]

melvin khosa low 12s!? There’s VQs doing that already with 330-340whp. This has to be at LEAST high 11s

[@MelvinKhosa]

Luis Ramirez Of course. I was just giving reasonable times just in case the driver can't launch the car.

[@japjoem4077]

Any check engine light with the exhaust mods?,

[@90RECON94]

Cams open the breath of the engine , Headers let it breathe & E85 fuel help it get the max out of the HP numbers ...

[@foster7517]

this car doesnt have headers or e85 tho...

[@90RECON94]

@@foster7517 @2:39 That sure looks like Z1 headers . And I bet you these numbers couldnt be reached on regular gasoline .

[@Tony78432]

So how much would it cost to do this to my 370Z?

[@stezenast5878]

Parts + labor

[@chodkowski01]

I wouldn’t doubt close t $8,500. The tune & Dyno alone can run anywhere’s from $400-$1,000.

[@philipholman1713]

Dude you seriously need to relax you are WAY to hyped up in your videos, think about switching to decaf. 😂

[@Deemah.cr3]

Didn’t Sasha’s 350z HR make like 400whp? HR>VHR

[@sneak916]

Deemah GZ Sasha also had headwork and ITB’s. Don’t be a fanboy. Mod for mod a vhr makes more power

[@MelvinKhosa]

Sasha has VQ37 rods, crank, custom pistons (since VQ37 ones don't fit in a HR), custom ITB setup, SGP longtubes, head porting and lots of headwork, super wild cams, the kitchen sink. Not cheap and not easy. Plus MOTEC...i.e. $$$$$.

[@sneak916]

Card Asset because they’re claiming 370z power so it doesn’t even include Sasha. Read better

[@Z1Motorsports23]

This is a record for the Z1 dyno on a totally stock motor (minus the JWT cams) VHR. Comparing it to Sasha's car is like comparing Apples to Oranges. Sasha's car is has ITB's, higher compression, built bottom end, etc. Not anywhere close to what we did here. It made more HP than Nissan's Pirelli World Challenge race cars we worked with many years ago.

[@DailyBeater]

@@Z1Motorsports23 i'd like to see this dyno duplicated with another build. what year car is this? good job guys.

[@rlknight57]

Sasha’s car also runs a dry sump oil system. It was formerly a Unitech built Grand Am race car. I would like to see what you guys could get out of a VQ DE if you throw everything you have at your disposal at it.

[@MelvinKhosa]

Sasha runs a VQ37 with HR heads.

[@rlknight57]

melvin khosa Yes I knew that.

[@johnnyCham12]

I'd like to try this on my 6mt g37 vert..

[@lucassturgin8710]

Sounds very much like a gtr

[@Boostedsuspects]

Damn only 376 with all that money 😬 not even close to 400whp glad the new Z is F/I easy 500+

[@ACommenterOnYouTube]

Thats ~450 crank hp from 330 stock hp.

[@real_ultrajoe]

I just come hear to listen to most beautiful sounding vq37 on KZbin

[@Subninja2012]

ECUtek or Uprev tuned?

[@Titilomelirifa]

The on point dyno 350z has a jwt fully built hr, right? Because that car is making like 400whp all motor

[@ronaldmcfondled9604]

That's a 35HR and this is a 37VHR

[@7eamGhast]

Throw a nice Wave Trac and a 3.9 Final Drive MMmmmmMmmMmM

[@MelvinKhosa]

3.9? That's weaksauce. Go with 4.1

[@7eamGhast]

melvin khosa for me personally 3.9 keeps it daily able,4.1 would be too aggressive for a daily IMHO. 4.1 if it's not a daily. throw some potenza re71-r MmMmmmmm

[@viciousvq1824]

4.08 the Perfect Final Drive Ratio

[@7eamGhast]

Vicious VQ would you happen to have any good videos for reference? I can't find any.

[@viciousvq1824]

@@7eamGhast kzbin.info/www/bejne/iZDHpa2Pqq6lrsU

[@calebwright2849]

What kind of results would you expext with the same set up on a vq35hr? Im pretty set on going the stillen s/c route since that is the only kit available to the HRs other than the aam tt setup and that is $10,000 before tuning, install and motor work. Once i added up my planned n/a build i just couldnt stand the thought of spending 6000-7000+ and thats just parts with out labor included on stuff i cant do myself. for maybe 325hp when the stillen kit with custom tune will put me in the 380-400ish with custom tune. Another plus is i should be able to install the stillen kit myself which will save me ton more money over other options.

[@johnseallende2665]

If you would’ve added for an example: Wiseco/Brian Crower kit, how much to the wheels would you then have added on top of this NA record on a street car? With the 11.0 compression, and with the variation of bore sizes, 95 and 96 mm.

[@chuckcribbs3398]

And the total cost is???

[@yasindereje2327]

i was looking into it and my estimate with all the mods excluding the exhaust would be around 5k. In my opinion with all the other things included it would just be easier to go forced induction.

[@real_ultrajoe]

Just in case someone wants the music is Thorr underdogs

[@spooler7828]

Folks were skeptical about the JWT C2 cams. With the right mods, good things happen.

[@nighthawk0077]

Apparently those cams really shine in the midrange and fall off up top.

[@spooler7828]

@@nighthawk0077 True, but you can make adjustments to use the power. Just have to know what to do.

[@nighthawk0077]

@@spooler7828 I am skeptical to be honest. I think Z1 is fudging numbers. Perhaps with Dyno correction factors. Hard to know as there was no "before" run. They also claimed 34whp from just their intakes.

[@spooler7828]

@@nighthawk0077 No, they give you more midrange. I have a set in my motor. Fudging numbers? Hard to do on a dynojet and that is what they have.

[@nighthawk0077]

@@spooler7828 Not questioning they give you more, the question is how much more. Anyway I'm sure that 370 runs strong. That much torque all the way from 4000 is nuts.

[@PR1NCETD0T]

So without cams im assuming this would be making around 350whp?

[@larrycurrence6874]

Assuming you've already got a catback and test pipes or HFCs seems this is tricky science and $ as some have tried 550cc injectors, intakes, and Z1 upper/lower plenums only to achieve modest gains over just doing the upper plenum and intakes. Without the cams the cumulative effect starts costing more but not producing much more gains.

[@tksever]

😆😆😆 probably

[@cruisecontrol6938]

Shiii I'm using stock 370z (310cc) injectors on my DE at WOT I'm at 68% duty cycle I made 260hp on a junkyard motor from an M35.

[@BlownC52000]

whats the cost of the cams and install?

[@roundearthshill248]

Cam install would be very expensive. Many hours of labor from a skilled tech. I'd say 10 hours labor minimum.

[@bigdogstreetperformance6761]

@@roundearthshill248 I paid $3185 at RZG Motorsports in New Bern North Carolina. Everything is included for that price!

[@roundearthshill248]

@@bigdogstreetperformance6761 thanks brother. That’s expensive but maybe not as bad as I’d thought it would be. Wonder how many hours it took them

[@MRxhalemotorsports1]

Sounds about right , but also refreshing water pump, timing components and gallery gaskets at the same time while it's open. So overall not too bad.

[@waugy370z8]

Damn!! 376 and 299!! I found my winter project.

[@C7Tmac]

Did you ever do this ?

[@WARCHIEFf93]

thats pretty much the setup i wanna do to my 350Z HR

[@k-a147]

Thanks for letting us know

[@johnnydavila6404]

Is this out of Georgia??

[@TheSol115]

100 hp litre ? wheel o fly wheel ?

[@PacificNorthwestR]

About 450hp to the crank holy shit!

[@mr.wicked9486]

Lol I’m making 373WHP with stock cams. I have the dyno sheet for anyone interested.

[@truone637]

What other mods do you have?

[@ViperMods_216]

These motors make great power per inch

[@kennethpowers8995]

That torque though. So sexy lol. That’s the best part

[@ACommenterOnYouTube]

3:43 Had a pause there at 7500 rpm

[@RESTORATIONRESCUE]

Damn, great work. I was looking for my white z32 in the background. Mine was there during that time.

[@Tunercraze]

What would this have made minus E85? Just a solid premium gas tune?

[@Zach3.0tt]

Tunercraze 360-367whp most likely

[@Will-xp6jh]

It made 364/294 on 93

[@gregoryjohnson9733]

@@Will-xp6jh I would be happy with that too.

[@dbjeffy]

​@@Will-xp6jhWas this with the OEM fuel pump?

[@Will-xp6jh]

@@dbjeffy Yes

[@GarielMotorsports]

Amazing just for bolt ons, congrats y'all

[@RageToDeath]

Lol I'm sitting at 342 whp and 297 torque with just z1 intake, z1 test pipes, Armytrix exhaust and uprev arc tune

[@mrsantosjon]

your big mistake is that over prices armytrix that puts out less power than other cheap exhaust smh

[@RageToDeath]

@@mrsantosjon lmao. Check your facts. I was sitting at 318 whp just from exhaust and intake alone no tune or test pipes. Armytrix produces 30 whp without tune alone.

[@RageToDeath]

@@mrsantosjon only ppl that hate on Armytrix are those that can't afford it and stand by the "tomei dahhh" lmao.

[@mrsantosjon]

@@RageToDeath isr but nice try. lol 3k on stock looking exhaust that just has a valve that changes the sound smh. I got enough for a tune and extra dough I think I did a smart decision :D

[@RageToDeath]

@@mrsantosjon keep hating buddy. It's aight. Stock looking? Lmao. Ok. =}

[@Wigwhom86]

With race gas??

[@clever1der]

This thing would make around 385whp with AdminTuning Intakes

[@mrsantosjon]

And a single exit. 🤔🤔

[@snbautogroup9011]

Not true at all lmao

[@clever1der]

SNB AutoGroup with m5 fuel fasho it will

[@k-a147]

About 2.5k-3k spent 👍🏼📝😅

[@Will-xp6jh]

Lol I wish.

[@georgeruiz4414]

Holy shiiii did y’all just shift at 8,500 WTFFF

[@patrickhalbeisen1440]

7500

[@willchristian9880]

Great work...... now throw some ITBs on there and lets see what happens

[@MelvinKhosa]

Lol no one makes ITB's for the VQHR/VHR. Needs to be a custom one and it will be very expensive.

[@juanmatos6044]

@@MelvinKhosa some companies make itb's for this engine

[@luis1898bebo]

There's more horses to be just hiding

[@unijabnx2000]

Did you Dyno the car when it first got there, before the mods?

[@Will-xp6jh]

Last time on the dyno was 334/277 back in February

[@jawaunb8405]

@@Will-xp6jh what were the mods in February?

[@unijabnx2000]

Those numbers were on the same Dyno Z1 uses?

[@Will-xp6jh]

@@unijabnx2000 They were on Z1's dyno

[@Will-xp6jh]

@@jawaunb8405 K&N intake, ported plenum, lightweight flywheel, art pipes and the greddy exhaust

[@irwinjimenez]

Did you have to upgrade any of the timing chain/tensioner components? If so, what & how

[@taylormorales2795]

Forgot to add that Will has EPS Throttle bodies as well.

[@Will-xp6jh]

No, those things are garbage.

[@dro.benavides]

Crank HP 450 Crank TRQ 350 Amazing 🔥🔥🔥🔥

[@erinnealsantacruz7764]

kitty slayer 400 ponnies

[@garnettg35]

People don’t realize a tune with e85 has a lot to do with this.

[@vtecnegro85]

Especially the torque.

[@fernandohood5542]

Yeap that was my suggestion a few months ago... Detonation is no longer and issue.

[@jareknowak8712]

Stock compression, no boost - e85 does not give much in this configuration. Im suprised that they run e85.

[@richd2744]

Great setup. Can't wait to build one of these. What is the the music?

[@ForFucksSake57591]

Sick video, congrats Will!! Who edits these?👍🏻

[@popadicsinabag]

That would be me

[@ForFucksSake57591]

Austin Popadics Very Niceeeee!

[@popadicsinabag]

Matt Lorentzoe Thank you sir! This one is def one of my favs.

[@Will-xp6jh]

Thanks, Matt

[@cduncan5690]

Where is the proper SAE corrected dyno graph. Industry has stopped using STD since 2006 and have been using SAE ever since to rate engine power. I don't know why companies are still showing people STD results. Properly corrected this dyno will be at 366hp at best.

[@lyndoncobb7077]

5 years later we got guys making 400+ whp on m5 and nitro crazy to think this platform is still improving

[@Rick_B52]

Choosing you guys to tune my G37 was the best money spent on it.

[@Z1Motorsports23]

We appreciate your support!

[@ACommenterOnYouTube]

​@@Z1Motorsports23you got over a dozen questions in here that you are ignoring .... Yet you answer this comment 🤷🏽‍♂️

[@jordan122095]

Would be nice to have hearrds and cams but you guys won't ship to California like wth we would be your guys biggest profit

[@drodzdrodz909]

Saving for 400hp package cams and lower ported then tune. Was this on regular 91 or e85

[@brianwright2132]

Sam, you better be ready for my dad and I with our 350z ;)

[@3406Accert]

Long tube Heat wrapped & triple liquid protected headers will make more constructive real world torque all the way through a torque curve than the basic generic short header this engine got.

[@jonny_z__370zna5]

I made 375 whp with no lower manifold and without my invidia exhaust on.

[@dbjeffy]

ECUTEK?

[@dbjeffy]

On E85?

[@ViperMods_216]

It's probably easy to get over 400whp with ported heads and higher compression

[@Will-xp6jh]

If by easy, you mean simply picking out the parts to do it, then yeah, it's a breeze. I've got Stillen SC money in this thing already. You're easily talking a stage 1 SOHO single turbo kit, something like $10-12k(including install) to break 400whp or the same money that would put you into the +525whp range.

[@ViperMods_216]

@@Will-xp6jh you don't even wanna know what a built viper motor cost lol

[@frankkirkman5994]

@@ViperMods_216 I do

[@beowolf9991]

Problem is vvel ... It makes too hard to port the head without messing with vvel and it will stop working properly

[@philloft]

Nice job next challenge is to make 400 plus to wheels which would def require a build I’m assuming forged internals as it goes from vQ37- VQ40VHR

[@Aeneas137]

This always surprises me when people don't know the VQ engine already has forged pistons and forged crank from the factory.

[@philloft]

@@Aeneas137 Wasn't aware of that but simply building the block up to make NA 400 plus hp was where I was coming from to tune a NA to handle that increased compression ratio I would assume the block itself would be bored out

[@mikekochendorfer7965]

@@philloft from what I've read the larger crank helps the torque a little and hurts the hp for a NA. Inhibits your ability to rev up fast also. FI would be a different story.

[@Boostedsuspects]

@@Aeneas137 only forged crank, everything else isn’t forged. I’ve built an old 370Z before and nothing about the internals we’re forged besides the crank. But Nissan has been doing that since the G35

[@devynslowik6185]

You could possibly get more out of it if you did a meth kit and raised compression. Wouldn't be very cost effective but just for the sake of it I suppose.

[@BLacknesmonstaz]

Now add a super charger!!!

[@Will-xp6jh]

🐌💨

[@SoHoDon_718]

Will you seem to have a fast 350z, for someone who own the 2015 g37 3.7 engine, I’m saving up for only one option to make it faster, so would you say get the supercharger or the zr1 package ?

[@alizonda3891]

Who is the Tuner... And did you use UPrev or ECUtek?

[@altruismfirst6489]

Are those zip ties holding down your ears from the noise it makes? :)

[@carlosm9111]

What race is it being mentioned in this video near the beginning? I would love to spectate some of these but can't find anything ...

[@timholubowitch9097]

We got 400whp maximas now with ls holly intake now

[@The-Muffin-Man]

I need my headers! I got z1 upper intake, z1 test pipes, jwt c2 cams, admin intakes, & Motordyne shockwave but I’m missing my headers to complete my build 😭😭😭

[@vigossvirus666]

Have u got ur headers yet?

[@The-Muffin-Man]

Vigoss Virus hell no I ordered the headers in early June or July of 2019, haven’t got them yet

[@The-Muffin-Man]

Vigoss Virus update: I just got my headers

[@taylormorales2795]

@@The-Muffin-Man Which headers? And why would it take u over a year to receive headers? its like a 4-8 week wait time. longest 10-12 weeks

[@The-Muffin-Man]

Taylor Morales z1 headers & they were on backorder at the time took about 8 months

[@mikokurtuma3767]

did this have long tube headers and if not what test pipes did u have

[@infinitexsound6087]

Not bad for a few bolt on but definitely not a record.....

[@4runner_litty]

I have a fbo 2012-370 roadster on e85- admin tuned. Making 340 whp, unopened . @817.VERT_Z on ig 🤷🏾‍♂️

[@Will-xp6jh]

340whp is 2009 news

[@foster7517]

so can this process be repeated...i got a z too lmao

[@X1xRiGox3X]

Needs a a full TomeiTi exhaust and I can bet you it will closer to 400whp still sounds restricted with that exhaust.

[@BigKfishing]

nope tomei wont make anymore gains...

[@jgonzalez4846]

Any single exist would be more than a dual for this application.

[@BigKfishing]

@@jgonzalez4846 no sir. just because a tomei is loud as fuck doesnt mean you will see any more gains... maybe 1-3hp max.

[@shadowdriftstl4]

tomei sounds sick but wont push it nowhere near 400whp..a dual exit exhaust would have more gains but not by much.

[@jgonzalez4846]

@@BigKfishing i said ANY single exist..theres other options than tomei ....its been proven singles give u that extra bit.Im not referring to just a tomei.

[@Subninja2012]

I'll be getting a dyno with Z1 intakes, Z1 headers, Z1 test pipes, and the Nismo R-Tune 2.5" exhaust. Interested to see the power once tuned. I'll be sure to post the results.

[@billbot2462]

So......?

[@ACommenterOnYouTube]

And ????

[@jockbad]

What drive train does it have? Will this work on a G37x sedan stock drive train?

[@trevano20]

That’s without racing fuel ⛽️??

[@Will-xp6jh]

Yup, pump E85

[@johninnh4880]

Drool! Sweet. Almost makes me want my 3.7 back.

[@dom_z3480]

What would happen with ppe long tube

[@jesusfigueroa5398]

Will this fit on a g37 rwd sedan?

[@NG-VQ37VHR]

it will. I've got a '13 g37 sedan with the z1 race intake with carbon fiber tubes and ported plenum, afe tb spacers, custom exhaust, and uprev tune. Lots of suspension components and bracing as well. Usually, if there is a part made for the 370, it'll fit or there is a g37 version.

[@jakeanglada4662]

Looks like eps 70mm TBs aswell. This is my goal with my '14 Q60

[@iwayne34]

15k easy for not much more power,, should be kicking m3 azz

[@JackOAT_]

idk abt that much, probably closer to like >5k

[@sanieldiaz842]

So to make this much power, does my car has to be on e85??

[@everlastmanshit]

I dont doubt the numbers at all i made 342whp and 284whtq

[@battlearenatoshinden]

The dyno says "at engine". The thumbnail says "RWHP".

[@Z1Motorsports23]

It says "at engine RPM = 7.27", essentially saying that the max power (376whp) is found at 7,270 RPM.

[@camerondrennon2293]

How do you think the power gains would be with a motordyne true dual? Would they be up there relatively to that with the greddy?

[@jawaunb8405]

Not much different. The MD will just sound better. The XYZ on the MD will probably make a stronger mid range.

[@camerondrennon2293]

Oh okay sweet thank you

[@johnpowers4076]

@@jawaunb8405 Truuuuue.