This Simple Trick Turns Old CFL Lamps Into Awesome Induction Heaters

[@tomt165]

Buddy I have been wanting to build a small scale inductive heater just like that for quite a while but I'm not good at coming up with things like this thank you so much you're the best.

[@taxxzempt3576]

No prob, thanks for the sub

[@DeanCalwyn]

00​@@taxxzempt3576

[@domm5715]

Did you actually make one, I’d be tempted to try if so

[@richardturner6340]

That is the best how-to video I've ever seen and I usually prefer a voice commentary or explanation, but this is clear, concise, and beautifully shot, my commendations to the videographer.

[@tipsintelligent2605]

I've been doing this kind of stuff for many years now, but this guy is truly fantastic

[@valerydan4206]

Based on your experience, could you recommend what lamp size/voltage is needed to be able to increase coil to 2-3 centimeters and to heat steal knife to a red state?

[@petterkonol9020]

Jangan anggap enteng atau memaki suatu percobaan.. sebab semua fasilitas kehidupan yang kita nikmati saat merupakan buah dari hasil percobaan yang sudah ribuan kali disempurnakan bahkan sampai saat ini masih terus dikembangkan.

[@monikabingen4482]

This is brilliant, thank you so much. Is the diameter size of the coil crucial, or can it made larger. I am thinking of sterilizing a scalpel

[@solarvideo636]

Может как для баловства подойдёт. Но а так смысл нагревать тонкую проволку? Её и горелкой также можно нагреть без труда. Другое дело, если работать с куда более крупными деталями.

[@theEVILone0130]

That's what I thought. I wanted to heat enough metal to forge Damascus steel knives.

[@Don_Rumata_]

Согласен. Бестолковая игрушка.

[@Секешфехервар]

Что ты хотел, это же индус)

[@Areandr]

@@Секешфехервар Зафир Юлдуз турок. А у вас какие-то рассовые или национальные предрассудки, к представителям полуострова Индостан ?

[@Секешфехервар]

@@Areandr Турок, да какая разница) когда код кривой говорят что его индусы писали (за чашку риса или типо того) цель интереса? Хотите иметь мнение о моих соплеменниках?

[@boltonky]

What an awesome project. I blew up my previous ZFD but putting to much current through it and they come in so handy at times

[@mach1553]

English [CC] did the trick, very simple & practical 👍

[@EvilDaveCanada]

I never thought about using KZbin Close Captions with auto translation before!!!!!!! I only thought of using CC for when it was hard for me to follow a video's audio. You have opened a ton of useful videos on subjects that I am interested in. It was because I never learned to speak any other language (including my own country's second language), that I can't follow any projects that are not voiced in English. The fault is my own, but at age 64, it is too late for me to learn anything else, so thank you from the bottom of my heart.

[@yasinsimsek6107]

Eyvallah zafer usta eline sağlık 👍 geri dönüşüm olarak güzel bir projeydi, adaptör vesaire gibi bu tip aletleri çöpe atmaktansa degerlendirmek çok iyi 👍

[@ZAFERYILDIZ52]

kesinlikle kardeşim destek için teşekkür ederim

[@rubenverwilligen3684]

geweldig , Weet je hoeveel stroom dit nodig heeft ? 220volt waar hoeveel wattage neemt het af ?

[@osmanavara3208]

Zafer bey harika bir proje, daha büyüklerini ,yapsanda bizde faydalansak, sizden daha büyük örnegin bir penseyi,ısıtacak kadar iribir,ürün yaparsanız çok sevinir mutlu oluruz teşekkür ederim kolaygelsin eline emeğine sağlık.

[@ahouracommando4183]

Thank you for your reply. About connecting two legs connected to fluorescent tubes. Which two bases are connected?

[@spvillano]

I'll award an exceptional brilliance award for overwinding a pre-existing core! And precisely zero on connecting core to objective. And less on RF fields and why such things won't work at mains frequency, hence the failed bulb electronics.

[@atrinurmanto6454]

Mr. Zafer ... Please tell me how to make this circuit stable at certain hot points ... (which results in not burning the iron too much) ... Thank you ...

[@hayrullahtelli1179]

TERMOSTAT

[@atrinurmanto6454]

@@hayrullahtelli1179 " thankyou "

[@orolinec]

so it worked when you tryed this?

[@ahouracommando4183]

Hello . The four wires of the moonlight tubes that you separated from the base of the hub circuit (p 1, 2, 3 and 4) at the end of the work, you connected a white wire to the two bases. What are those two bases? p1 to p3 or p2 to p4?

[@alvarofuentesarjona2668]

Señor Yildiz, excelente trabajo y una pequeña pregunta: Es importante el voltaje de trabajo de la bombilla.? Puedo utilizar su circuito para una que trabaja a 120 voltios?

[@sagittariusa3859]

señor fuentes usted solo hágalo haga las conexiones como las hacen en el vídeo y después conecte si le funciona bueno y si no pues no pasa nada no va a causar un incendio ni nada por el estilo pero el circuito si funciona ya sea a 120 o 240

[@robdixson196]

The electronics they pack in those little things is impressive considering how cheap cfls were.

Zafer Hocam bu devre ısıtmaya geçtiğinde kaç amper akım çekiyor acaba? kablosuz enerji aktarıcılar gibi yatay bobinle bu işlemi yapmak mümkünn olurmu? 2. sorum bu devre özelinde değil. Genel olarak.

[@nihatkavrak1956]

Selamun aleyiküm. Bu devre 22 w lık devredir. Sadece,bu yöntem ile, daha değişik ısıtıcılar yapılabilir.zafer kardeşe çok teşekkür ediyorum.

[@teardowndan5364]

No insulation tape between transformer primary and secondary. Using this could be quite shocking in a 240V country.

[@mrgoodman6620]

Yes, and the fact that he put the active (brown wire) on the boards neutral and not on the line fuse, means the circuit is always HOT! even if the the fuse were to blow, and thats unlikely without earth (N/A in this application ) and out of phase! But we're probably being pick... CONSIDERING IT'S AN UNBOXED LIVE DEATH-TRAP ANYWAY. LOL

[@Pulverrostmannen]

@@mrgoodman6620 it is a European plug bro, The plug is equilateral so we can insert such plug in any orientation in the outlet meaning there is no difference in how the blue and brown is connected in the end so the phase could end up on any wire. That is why appliances here must have proper design to have this in mind to be safe, AKA have the whole live circuit encased as it was inside the bulb. But it won´t change the fact that this circuit is a deathtrap without proper isolation and especially the winding on the transformer.

[@imfloridano5448]

​@@mrgoodman6620 😂😂😂😂 hey with the life expectancy of the YOLO(you only live once) crowd this was designed jus for them. Enjoy the shocking revelation 😂😂😂

[@mrgoodman6620]

@@Pulverrostmannen Yeah on small appliances phase is not that important. But when it has an earth it's critical, so corect wiring should be practiced always. People don't think it matters when putting the ends on an extension cord but that can be deadly. ... but look what were talking about. A virtual desktop anti personnel mine! Lol

[@Pulverrostmannen]

@@mrgoodman6620 it is the same on every single corded appliance we have here. Be it a microwave, water boiler, mixer, toaster, TV, computer or anything in between they can still all be reversed in our outlets, the law still applies to all of these as well that they need to have approved insulation for electric shocks. It is only when you come to our 400volt appliances the connections are more fixed. Then the neutral and earth always are the same but the phases might in some cases be flipped to match a motor rotation etc. But in general, as if you for example would lose your neutral in your appliance that side of your device would become hot too as nothing gonna drain the voltage low. In respect to ground your hot wire is both positive and negative in that regard to the neutral one meaning that neutral gonna have a high voltage potential in regards to the hot wire anyway. AC voltages are a bit special when it comes to maximize safety. That is why you need your extra ground in case the neutral wire fails and make your whole device having a hot potential no matter how it was connected in the outlet.

[@tugalqurbonov8174]

Assalomu alaykum. Birodar. Metall eritadigan pech yasash mumkinmi.

[@oos_amin]

ایده و خلاقیت شما قابل ستایش است استاد❤

[@henrym.5884]

Valuable presentation. Thanks for your presentation. Good Luck.

[@diyathomevn]

a good project, can this heat the sewing needle

[@electron7125]

We have to be extremely careful to handle that ballast because when it is disconected from the load, the voltage jumps up and it’s gonna blow up. The load should be always there to load that voltage down.

[@Barmaley80x]

На настоящей индукционной печи ставится схема согласовательного трансформатора. На любительских схемах такого нет... Ну будет сноп искр и незабываемые приключения...

[@raloed.363]

He shorted the output in the video. @5:20 you can see the white wire running across the board. I think this prevents the voltage from damaging the circuit

[@domm5715]

Good things to know, fo sho wanna avoid blowing shit up in my face, haha, is there a way to tell if he shorted it out by testing it with a multi, if I built ones?

[@Gamer_PRO225]

abi elerine salik cok guzel devre olmus bende uzun zamandir bu devreyi ariyordum ama mosfet den bulamiyordum bundan yapdim calisdi

[@hkonas]

elinize sağlık ,bu projedeki ısıtıcı kısmının genişliğini 2-2,5cm çıkartsak işlev görürmü acaba

[@ZAFERYILDIZ52]

Hayır güç düşük isitmaz

[@emrahergun9626]

Başarılarının ve çalışmalarının devamını dilerim abicim küçük bi sorum olucak ısıtan kısmını 15 mm yahut 20 mm sarsak işlevini yitirir mi illa gösterdiğin ölçüde mi yapmalıyız ?

[@ahouracommando4183]

I mean p1,2,2&4 da1. da2. da3 and da4 (four bases to which the fluorescent wires are connected). Which two pins do you connect? In the clip, you connected the two legs together with a white wire.

[@AliyazHandicrafts]

Can I made cooker heater with same procedure? Please guide me. Thank

[@usmonsafarov9018]

Tashakur usta

[@grzegorzszymanowski4091]

Altium Designer ..... 10 000€, software for every body!!!!!!!!!!!!!!!!!!!!!!!!!

[@smertrusne3156]

10k $ Software commertial on a channel for DIY from scrap, lol.

[@BrianG61UK]

If you try to copy this, BE VERY VERY CAREFUL. Different manufacturers lamps are likely to behave in completely different ways when modified.

[@victoryfirst2878]

I am amazed that this actually works. What other item can be used to make a larger one ZAPER ???

[@victoryfirst2878]

@@Hyzerwyzer DO you have plans fella ?? Would make a nice video for sure.

[@poligraph841]

The good idea, but there is no need to break the transformer. The gap is big enough to wind a secondary winding directly, and it is possible to make the heating coil using a longer wire used for the transformer winding without extra soldering. Just in one piece.

[@ramiroturizo808]

Me podrías ayudar, para hacerlo como dices tu?

[@richardpfeifer3348]

@@ramiroturizo808 na

[@electronicinventorchannel5536]

How To Make Easy Inverter 3V DC To 220V AC. kzbin.info/www/bejne/oX_PZKNtlrySopo

[@JorgePPG]

​​@@richardpfeifer3348 No funciona, yo lo comprobé y no funciona, essa inductancia no está cerrada si se queda así, entonces no va. Yo estropeé un diodo ahora mismo peró calento un destornillator (lo calentó cerrando el circuito, como si fuera un consumador conectado al lugar de la bombilla).

[@sebahattinacar5222]

Kolay gelsın üstat., peki bobın kablosu aşırı sıcaktan zarar görmüyorum? Vernıke zarar gelmiyormu?!bobının vermıgı asirı ısınmadan elektro manyetık özelliğini kaybetmezmiş acaba, ben böyle merakla düşündüm

[@antalfilaszlo7537]

Köszönöm szépen az ötletet .😊 Megcsináltam a videó szerint , működik...👍👍👍👍👍👍😊

[@user-Orif.]

Можно ли использовать катёл вместо газа для отопления дома?Заранее спасибо за ответ

[@Sameer.Electric]

Great work, we want a bigger circle.👍👍

[@phuocngo2590]

Do we need to have a piece of metal inserting inside the induction coil to get the heat? And, can we roll the coil in larger diameter? What I am getting at is trying to maker a heater using induction coil.

[@mudzanin9986]

It heat metals by magnetic induction... If you need another type just do some big resistor.

[@phuocngo2590]

@@mudzanin9986 it means We’ll literally have to have a piece of metal insert in the center of the coil to generate the heat ?

[@sailingcapedissappointment2012]

Just take what he has there and stretch the coil out a little more, put it in a pop can with some holes in it and blow air through the popcan with a little fan. If you have an old burnt out blow dryer you could take some of that element wire and put it in the place of the coil he has here. I always save blow dryers when they quit for the parts and usually it is Nichrome wire. Having that drill bit in there when it gets glowing good will make things even warmer. If you set up a couple more of these in parallel you can reduce the amount of windings you put on the transformer and reduce the amount of heat it puts out by switching back and forth to the ones with less windings on the output coils and you could call it a Mesa Boogie triple rectifier space heater ....

[@agold3765]

@@sailingcapedissappointment2012 I would like to make an induction heater like this and use it to heat up some 3/4" bolts that are rusted into the frame of my vehicle. Do you have a suggestion on what I should use to make this? Thank you

[@sailingcapedissappointment2012]

@@agold3765 If you can find a length of Romex that diameter wire should work well for that if you can get a transformer out of a microwave with choke or large diode to keep the heat off of the transformer. The problem with heating the bolts up though is that they will expand, I.E. increase in diameter and there will be no moving them. If you use any heat it would have be on the frame at the hole they are inside of and then you can only put the heat in one place so that the hole will open up like a C otherwise the metal at the hole will just swell in size making the hole smaller. If you have any nitric acid you can uniformly reduce the size of a steel bolt and there won't be any rust left either as long as you passivate it quick enough. Dont breathe any of the fumes from the amber colored cloud though. I have made a steel bolt about that size disappear with Nitric acid and it didn't take very long. You might be able to mask the metal that you don't want affected by the acid with Nickel Never Seize, it is very acid resistant and sticky. Areokroil works well WD40 does nothing. Marvel mystery oil is good, A rattle gun might work if you haven't tried that, don't use twelve point sockets if you haven't already rounded the head off, use a six point socket or box wrench.

[@jmikronis7376]

The metal being heated is by its hysteresis. It makes the metal work against itself. That’s internal friction where the ac magnetic fields within that object that heats it up. If this setup were insulated for infrared energy, it would do better because of less energy loss to the ambient air.

[@ekindekor8980]

Ustam ellerine diline sağlık . Uçtaki bakır yayı daha geniş tutsak aynı verimi alabilir miyiz

[@Tariqlhr9]

Wow, truly mind blowing idea👏👏👏

[@schabanow]

Next step - make induction soldering station. Spoiler: you're to find proper alloy for soldering stick (tip) in order to heat it up to desirable temperature that won't exceed the threshold defined by this alloy itself. In other words, you won't need any thermocouples or any other sensors to control the temperature of your soldering tip! Just physics - no electronics! ;) I beg you have to try this!

[@thisisyourcaptainspeaking2259]

Why not just use resistance heater with triac phase control?

[@andochasach]

@@thisisyourcaptainspeaking2259 Because air, copper, solder have different rates of conduction, constant power means variable temperature unless the heating tip has a big thermal mass. But an inductive heater heats only until it reaches its curie point and as schabanow said, physics tries to keep it near that temperature. I do wonder how CF electronics designed to put out < 25 watts handles what looks like a bigger load.

[@dewenne3721]

@@andochasach unfortunately the induction will also induce Voltages in the circuitry which you want to solder and it will potentially destroy it. It also could happen that massive Copper Areas on a PCB will absorb a Lot of Energy if you come to near to the induction coil. So it´s a nice Idea but there are severe concerns against.

[@fasthead]

Wow where can I buy those.magic magnet's.

[@astdizayn]

Arkadaşım sen mucitsin. Maşallah. Bu transistörler uzun süre çalışmaya dayanabilir mi? Tecrübe ettiniz mi? Sizce bu devreyle sistem kurulabilir mi?

[@BALDA8511]

Наверняка, с помощью этого можно размагнитить пинцеты, отвёртки и др. инструменты 👍

[@KolekseyonKameli]

درود،ایا میشود وقتی لامپ میسوزه از قطعات استفاده کرد ،مثلا بجای همین بخاری کوچک تعداد بالایی لامپ ال ای دی کوچک سه تایی و یا ریسه ال ای دی استفاده کرد...

[@bw3506]

Would it still work with a slightly larger coil wrapped around a ceramic tube to protect the varnish on the wire?

[@sideswipe147]

No need really. Just lay a thin bit of fire blanket on the bottom half of the coil. That way you can put the piece down. Just be mindful of the "ceiling" when moving the metal into or, more so, out of, the field.

[@riazjutt6993]

Sir make a video on induction coil heater at home and which component used into the circuit.coil Dia minimum 2'' inch

[@seanstraw8688]

As a safety precaution, I would have waited until all other assembly was complete before connecting the plug wire. Also, for hacky mains projects, I like using the plastic lever "wago-like" connectors - the plug wire can have one of those connected to it's wires (thus, no exposed hot wires ends), and it isn't such a hazard on its own, and then the leadwires for little projects like this can be inserted into the other side of the lever connector. The device can be disconnected at the lever connector and you can move the supply cable to some other project when needed. This video could be improved by providing better documentation on how the terminals are selected for the white bridge wire, since there are many CFL PCBs out there (mine for instance has just two pins on the transformer), and the terminals are labelled differently. Also, just as importantly, Most ferrite core transformers have the halves EPOXIED together, and it sure looked like yours was when you were unwinding the tape from it, but somehow magically, it wasn't (lucky you). Also, probably advise - is the transformer doesn't have the space for the additional windings, that's not a CFL to bother using for this project - yours clearly has a bit of space between the stock winding and the ferrite. Some ... do not.

[@samidirek2336]

Zafer usta 6mm çapında sandığınız bobin çapı illaki 6mm mi olmalı daha büyük çapta örnek 15mm, 20mm çapında olsa çalışırmı

[@miguelgalindo2108]

Cambia el número de espiras,y eso te permite mantener dentro del margen de funcionamiento, la inductancia. Obviamente, mayor diámetro, menor número de espiras !!!

[@M-parto]

Can we use cfl lamp circuits with more watts in this project?

[@keupondestroy911]

Merci beaucoup pour la vidéo 📼

[@turgayelegez4058]

Bununla maximum Ne kadar süre ile metali içinde tutabiliriz

[@etyrnal]

can an unknown number of turns in a coil be reverse engineered/discovered by using known coils inductance to calculate it?

[@ashraf9472]

الله ينور عليك التميز كله

[@cachhomevideo1546]

Great project i will try this

[@سیدعلیاکبررضوی]

درودوسپاس..دوست خوبم واقعاازشماتشکرمیکنم بابت ساخت وآموزش این کلیپ زیبا.کاش بشه درمقیاس بزرگترهم یک کلیپ تهیه ونشون بدین.واقعاممنونم ازشما🎉🎉🎉🎉🎉🎉🎉🎉

[@alitn588]

بابا اینکه بهترین بود الان همه تریاک کش ها ذوق می‌کنند 😂

[@Hamedy11]

What if we use a stronger lamp, for example a 40 watt or 60 watt lamp?

[@emiryakti4691]

Ellerine sağlık abim , bu sargı yöntemi ne ek olarak devre kesici eklesek punta yapmada olabilirmi , teşekkürler.

[@geckoproductions4128]

Really clever idea, thanks

[@АлексКондратов-ъ5в]

Шурум Бурум Хуюм !!! 👍😂

[@ÁREAJ27]

Incrível amigo, trabalho muito interessante e satisfatório, obrigado!!! Boa sorte com muita saúde e muito sucesso!!!

[@alro2434]

I only have 120v led drivers/ballasts/whatever so I imagine that the wire size is going to change, any idea which way? Also have much more wattage led drivers to try.

[@Krooksidemobster420]

So could you put like 2,3,4,20 in series and make a bigger induction coil

[@muhammadmarula-ji5wu]

Very good for educational purposes

[@ianpatrickclarksr4074]

What will I do with the red hot paperclip now?

[@LordSmyrnian]

Probably one of the best how-to videos on how to unlife yourself.

[@cemmutlumail]

Çok güzel ve faydalı. Teşekkürler. Bir soru sormak istiyorum. Isıtma yapan bobinin üzerindeki akım ve voltajı söyleyebilir misiniz? yani çıplak elle dokunsak çarpar mı?

[@philcarver9025]

the lamp is an electron beam not an induction heater induction heating is the use of eddy currents to generate heat in heavy coils as demonstrated

[@victorgamboa8198]

Zafer esta esta excelente este circuito electronico, hizo pruebas de cuanto aguanta estar calentando los hierros? De todas formas lo voy a hacer y le aviso como me fue. Saludos.

[@route7572]

Post your link...wanna see your project bro

[@pidacopia]

Yo también quiero verlo

[@markmonson573]

Well done for getting this to work. Quite dangerous though, there are much safer ways to do it.

[@ebrahimalipour3123]

سلام برادر.شاد و پیروز باشی اگه لامپ بزرگتر مثلا 50 وات باشه،تعداد دور سیم پیچ ثانویه تغییر میکند؟ممنون

[@ziyaozdemir5848]

Teşekkürler Zafer bey

[@guvenqwx9769]

24 saat çalışsa harcayaca enerji maliyet ne olur acaba oda içi küçük ısınma yapılabilir galiba metal 1 boru içinden su deyir dayım radyatör fan ?

[@hasbialtundas8850]

Çıkışta kaç volt kaç amper var cevaplarsanız sevinirim . farklı bir amaç için kullanmak niyetim var'da👍

[@UserUser-uq5ux]

ZAFER, где сверло 8 - 10 мм. нагретое до красна? В руках у тебя сварочный электрод 3 мм. Сергей Васильев.

[@atrinurmanto6454]

Mr. Zafer ... Tolong kasih tahu bagaimana cara membuat rangkaian ini stabil pada titik panas tertentu ... (yang hasilnya tidak terlalu membara besinya) ... Terimakasih ...

[@garetz2011]

Maybe a light dimmer switch? I will try it, but I dont understand a shit about electronics.

[@cowdough94]

whuuuut! neato!

[@suskun561]

Süper elinize sağlık ustam 🎉🎉🎉🎉

[@vehbiatik]

Nerelerde kullanılır bu ısıtıcı ve güvenli olurmu ben kuluçka makinası için düşünüyorum

[@SudarYasar]

Güzel bir çalışma olmuş, tebrikler.

[@cuocsongmienque1976]

TUYỆT VỜI

[@almoulatham2141]

ممكن اذا استعملنا دائرة خاصة بمصباح 20w او اعلى

[@ToyMarston]

Maybe could be heat source for absorption refrigerator , if it heats up copper ? #RV #camping off-grid air-conditioning

[@cumaliyaman2480]

elinesağlık hocam bukadar zayıf kart demiri kızartı böyleşeylere bayılıyorum👍👍👍👍👍👍

[@ManyHeavens42]

News Flash::::heat induction is flux capacitor,Whats Missing can you figure it out, Particle Accelerator.

[@samaEX1]

سلام داداش ظفر😍😘 . تشکر خیلی ایده خوبی بود موفق باشید داداشم

[@ЭдуардМахиев]

А вторичную обмотку не стоило ли изолировать?

[@lewis2553]

It is.

[@sandroventania782]

E é...usa fio esmaltado

[@Добрейший__Кыс]

По хорошему-конечно нужно изолировать.

[@SUHOV99]

​@@Добрейший__КысБрат мой... это штука реально работает😮?? а если взять большую КЛЛ лампу-будет хоть гвоздь греть ?.. спасибо

[@teoclark1035]

ellerine sağlık zafer kardeşim,her videonu ilgi ile izliyorum,muhteşemsin

[@FatihK3469]

Zafer Bey, Elinize emeğinize sağlık... 🤌👏👏👏

[@sbkenn1]

The cross sectional area of a transformer core defines the amount of power that it can transform. OK, at higher frequencies, it can handle more, but this core would be limited to around 50-80W.

[@tahirhussain64]

Which type of wire is used it's dimensions and it's turns. Please share

[@Yate669]

Well can I use the intended transformer for the regulated power supply

[@lewis2553]

I was expecting him to short across a few turns of the induction coil with that red hot rod. That would have been interesting to watch!

[@garyhalliday2140]

That's the comment I was looking for. It's not that safe when the insulation is burned off the induction coil.

[@thisisyourcaptainspeaking2259]

@@garyhalliday2140 I guess you could add high temperature insulation tubing, the braided type.

[@jum5238]

@@garyhalliday2140 I did notice the coil spread out, probably to avoid having one loop touching another.

[@rogervancouwenberghe6685]

The wire is lacquer insulated.

[@AliyazHandicrafts]

How many output watts is it?

[@jeit9495]

Top👌the simplest and best, I need a soldering iron from this, kindly make one👍

[@psycho3344]

What size cfl bulb would work with car rusty bolts? I see some tools are 1000w?

[@stelleratorsuprise8185]

unbelievable what you can do with just a few watts of power.

[@martinda7446]

20...

[@donwest5387]

does the heating coil have to be 6mm?

[@andrzejporeda7281]

Świetne jest zrobiona ta robota i bardzo świetny jest ten cały pomysł pozdrawiam twórcę tego filmiku 👍👍👍👍

[@andrew_koala2974]

andrzej nie durej