Zebra GK420T Printer Setup

[@SkarredKage]

Good video. Everything worked. I work at an HOA where we use Zebra and this helped some glitches. Thank you for posting this. 👍

[@zambortta19]

MARC!! THANKS FOR SHARING THE SETUP ..YOU DON'T KNOW HOW MUCH THIS VIDEO HELPED ME ! ..THANKS MAN

[@antoniodivi4393]

Thank you Marc , Direct and easy instructions !

[@eitach]

MARC THANKS A LOT! THE BEST VIDEO FOR THE PRINTER!

[@howumeowin7971]

You saved my life!! Thank you!!

[@salbertcj]

Gracias Marc, justo lo que buscaba. Saludos desde Perú!

[@pyromaniac5435]

MANY THANKS MARC. YOU ARE A LEGEND.

[@waselsafi2167]

Hi thank you for your time I have a problem with this printer which is the label doesn't calibrate well and sometimes while I print something it says out of paper and the paper exist inside the printer any suggestions? Regards

[@toeknee3696]

Thank you my G you saved me today!! te ganasate us seis

[@quickfix-jb4188]

Thanks for that video

[@brucegor]

bought ink on amazon. No take up roller. Any idea where to get a takeup roller? thanks for the video by the way. Instructions provided are sketchy

[@sacpike]

Thank you for this video, @Marc!

[@angelwings197]

I’ve been wanting to get a label printer for my small business for the longest time and finally pulled the trigger. I’m glad I did ! This machine is great kzbin.infoUgkxw55tQTywUAAOsbrlwxONZULry77sFF1Q and the blue/green color matches the rest of the accents in my office. My favorite part is how small the footprint is. It’s less than 1/4 the size of my regular printer.Set up was fairly easy. Seller will email you a link with video instructions Which I found to be more helpful than the written instructions. I use a Mac and had no issues. They even included an adaptor for USB to USB-c which is great because I’m always losing mine! I had a few issues getting the labels to print properly and wasted quite a few sheets. You need to play around with the settings to get everything adjusted just right. If you have the wrong settings, it’ll crop off the edges or feed through blank labels. These aren’t issues with the machine though, just user error.

[@mm-kv7cq]

شكرا لك شرح جيد ومفيد

[@jakecowin2095]

Did it come with the ribbon? I found my roller but no ribbon.

[@victorgarret2808]

Thanks very helpful

[@diegoraulfloresestela3884]

What size was the labels you were using for this video? Thanks,

[@bayaroch]

can i print care label fabric labels?

[@Haisanbaba]

I just bought one of these second hand (came without any cables) - can you please advise what power supply unit would work with this?

[@Thefave_]

Can Zebra GK420t Print tag and Percentage Tags? (this is for clothes, they are sewn on). Everything should be printed on a satin ribbon. Since I bought it and I'm suffering, I can't figure out whether it works or not?

[@chessguru900]

My Zebra GK420 is flashing red slowly. The media is loaded and the lid is fully closed but still keep blinking red. I have tried to calibrate it but after calibration still goes back to flashing red. Any ideas?

[@christopherashton4381]

what is the ribbon name for that? i bought this unit but didnt came with any ribbon.. which one do i have to get?

[@ariagferreira8960]

great for the price

[@safuvanarayanthoppu4933]

Thanks man👌

[@reviewer3448]

Can you print these using direct transfer without the ribbon as well?

[@Mff03269]

how to set print speed?

[@dierenfilmpjes5136]

Fantastic

[@F1rstlane]

Thank you so much

[@mparvez654]

Thank you

[@henryarpon6168]

How do you reset the IP settings? Another video said 4 blinks but it didn't work.

[@marcdoyon712]

You can reset the printer to factory defaults by holding the button down and releasing it after 4 blinks. Remember, it is a group of blinks. When you hold the button down, it blinks once, then it blinks twice, and so on. Release the button after the group of 4 blinks. Another way to change the IP is to print the config with 1 blink and browse to the printer with the IP it has assigned.

[@henryarpon6168]

I was able to reset now, thanks.

[@annamariavanwyk6577]

Mine is just flashing red and it did not do anything. I managed to get the drivers off the website for Mac and it picks it up fine.

[@okazabloggish3166]

how to set zebra to return back (rewind) labels when it find the gap? it wastes a lot of labels. I'm not an expert in labels printers but I've seen printers rewind labels.

[@bieliaievays]

The best

[@zdarowdy]

Hi,Ive got a problem is anyones know,when i printing lable is printing fine but after that comes out another one empty! How to fix this problem?? Thank you

[@LaurentTar]

Hello how about roll with double stickers ?

[@estebantimmermann2727]

hi, did you find the solution?

[@MrDieseloo1]

how do you stop printing mid queu?

[@haithamabdullah2327]

I have one of this printer but my scanner can not read the barcode sometimes it's read and others times does not read . Help me please

[@marcdoyon712]

This can be caused by multiple factors. What symbology are using for your bar code? Are the bar codes printed dark and crisp lines? Is the bar code close to the left or right edges of your label? The settings we use for most customers... Code 128-B for the symbology 25 on the darkness setting 1/4" from each edge of the label

[@albertotorres7139]

No me calibre

[@Lugzexplo92]

That a waste of sticker 😒

[@11777156]

Thanks very helpful