ZEEMODS Cummins N14 5" and 8" comparison! Including drive by JAKE :) - American Truck Simulator

[@salientsystems3175]

Thank you. I was undecided on which one to get. Fantastic video helped me decided...loved the 8" but will wait until it's updated. In the meantime the 5" will sound just fine in my Classic XL heavy hauler. Nice work by the way.

[@TanteBerthaTrucking]

Awesome to hear, and thanks for watching! When the 5" updates i will make a new comparison of the 2 🙃

[@DB7GamingSimulator]

Great comparison buddy !! 🤘

[@TanteBerthaTrucking]

Thanks man! Have a good weekend!

[@DB7GamingSimulator]

@@TanteBerthaTrucking same to you man !!! ✌🏼😎

[@D_in_DC]

Great video! Thank you! This helped me choose between the two.

[@TanteBerthaTrucking]

Awesome good to hear! He is recording a new bigcam aswell, cant wait on that one.. have a great christmas!

[@Adam-cr8qe]

The original cummins n14 8 inch he released on steam was a real window rattler, but when he released it as the paid version I believe the jake sounds got dampened like they are still now. I heard it was to do with the updated scs software, didnt sound as intended, not much he could do about is apparently

[@TanteBerthaTrucking]

That engine on steam is amazing.. i stil hope he updates that one some time

[@Adam-cr8qe]

@@TanteBerthaTrucking Ive been waiting for so long, it still works on 1.45 as far as I know, but I would love a G4 version as its a bit dated now

[@TanteBerthaTrucking]

@@Adam-cr8qe I think if i can remember right the sound on the in or outside needed to be updated very bad, either of the 2 have soft sound.

[@jaygreentree4394]

I dont run a lot of mods because I just dont need to but zeemod is top notch.

[@TanteBerthaTrucking]

Yeah zeemods and slav jerry are mostly the only engine mods i run with.. and rarely other mod engines.. zeemods for the clear sounds and slav jerry for the raw sounds.. both amazing sound moddersa

[@SlavJerry]

for be 5" is much better since it's G4 and fixed problem from 8" but still not so accurate for american trucks since it's recorded from ERF EC14 which is european and different exhaust system

[@TanteBerthaTrucking]

Yeah thats true man! Stil i do love the 5" sound a lot!

[@BigCool95]

The exhaust is no different than it would be on an American truck

[@SlavJerry]

@@BigCool95 I guess that also depends on exhaust setup also, after all I am not in america so all my opinion is from video also hi again bigcool

[@terrancebubbatrucks]

The sound of the ec14 is my lorry it’s got twin straight through 5” stacks it’s 5 inch from the turbo back

[@FlexZone100]

Love the video! You got a new sub! EDIT: I see it now in the description

[@TanteBerthaTrucking]

Thank you a lot sir! Glad you find it out lol.. i should notice it in the video itself aswell next time.. stil learning tho!

[@FlexZone100]

@@TanteBerthaTrucking Yeah no problem! Keep up the awesome work

[@teecee5921]

which coe kenny is ths and where is it available

[@TanteBerthaTrucking]

Hi brother.. i always put all links down in description, from the kenworth is also there😊

[@NotchNate]

Is there any N14 sound mods that are stock? Without the exhaust that’s 5 or 8 inch???

[@TanteBerthaTrucking]

Hmm not so far as i know bro

[@NotchNate]

@@TanteBerthaTrucking thanks man, I’m trying so hard to find the DD 60 series and the N14 in their stock sounds.

[@TanteBerthaTrucking]

@@NotchNate Slav jerry released an stock dd60 a few weeks ago! Still have to try it out myself aswell...

[@NotchNate]

@@TanteBerthaTrucking sweet man, thanks I’ll look for that right now.

[@FlexZone100]

8:18 how do you get the camera there?

[@TanteBerthaTrucking]

Ah thats the: Pivotable cabin roof camera of steam bro.. not all trucks work.. and if they work not all are un the middle but other then that it is a good mod.. you can look arround aswell!

[@FlexZone100]

@@TanteBerthaTrucking Oh cool thanks

[@TanteBerthaTrucking]

@@FlexZone100 You're welcome!

[@DeltaTristar500]

What wheel pack are you using?

[@TanteBerthaTrucking]

Hi bro, this is the 24.5" free wheelpack from retro development.. it is a pretty nice wheelpack enjoy it! retrodevelopment.gumroad.com/

[@Joe-hk2qq]

Both sounds need tons of work this is probably the least impressive of all his sound mods

[@TanteBerthaTrucking]

Why they need tons of work? I know the 8 inch needs to be updated to g4 but still i like them both.. never heard them in real life so yeah cant say annything about that tho!

[@D_in_DC]

I wouldn't say these are the "least impressive" of all his sound mods. I use the Signature 600 currently, and have used the older N14. I think the 5 inch exhaust on this mod sounds better, at least from my American sound point of view. I really wish Zeemods could sample American spec'd trucks.

[@anhkietduongdo]

@@D_in_DC He does sample American trucks? Sure Zeemod is based in the UK but that doesn't mean imported trucks sound any different

[@D_in_DC]

@@anhkietduongdo vehicles imported to the UK have to meet UK emission standards, which are generally not as aggressive as the US. Generally, that means that trucks in the two countries sound, at least somewhat, different. Emissions testing in each country is also different.

[@terrancebubbatrucks]

@@D_in_DC the 5” sound is from my truck it’s got twin 5” straight through stacks

[@EazyNuh640]

Don’t know what he was think recording a n14 European truck. it does not fit the American trucks don’t know how y’all think this sounds good it’s horrendous especially in high rpm

[@TanteBerthaTrucking]

Well for me it is just i like the sohnd or not lol.. it is not really compareable for me since we dont got american trucks here in holland.. so i have nu clue what sounds realistic and what not😁