Zhiyun Crane 2S official tutorials 02 how to balance

Hi everyone, the long awaited official Zhiyun Crane 2S tutorials are out. I hope this will help you and put any technical obstacles out of your way when creating your next awesome project. If you feel like purchasing one, feel free to click the link below:
Standard:
store.zhiyun-tech.com/product...
Combo:
store.zhiyun-tech.com/product...
And if you have any problems or questions, feel free to leave them down in the comments and I'll do my best to help you solve it.
Have fun and enjoy :D

[@jkspinalchoice]

EXCELLENT! I really appreciate the time and detail you put into your videos! THANK YOU!!

[@siddkelvision9874]

Great Video bro! Much needed. Just got my 2s last week and finally ready to use it. This was definitely a straight forward tutorial to get it going! Thank you! and Subscribed!

[@marcelbrandel9078]

thank you

[@NN-xf3dy]

Thank you so much for this video one of the best explanations on setting up a gimbal!

[@marcelbrandel9078]

haha, no problem

[@renjner]

thank you so much ....❤️❤️❤️superb presentation..🔥🔥everything clear n perfect

[@enzosso]

Thank you!! This was a great explanation!!

[@georgweyand88]

Awesome tutorial. Thank you very much.

[@taniamoussirou2671]

This video helped me a lot Thanks 🎉

[@lingame9910]

Thanks 🙏 very helpful

[@PeaLoop]

Really helpful, thanks!

[@dezzmezz8594]

perfect video! well detailed and very useful!

[@marcelbrandel9078]

thank you

[@abhaysharma3720]

Thnx for ur efforts 👌👌😊

[@itsvzion]

super informatives Video dank dir spann ich jetzt meine A7v vertikal rein😊😊

[@badrmaghmoma7943]

Thnx ♥️👍🌹very good information

[@raymondedwards5313]

I keep getting an Axis Lock message on my screen after balancing the gimbal?

[@lyvampire]

Thank you for the detailed demonstration, after I followed the instructions, I ended up with the camera pointing down when I turn it on, could there be a problem with my Tilt axis, what can you recommend for this issue?

[@gatlinproduction]

I have Sony FX3 with KONDOR Blue Cage. Can I still balance my Gimbal? also I need to extend the arm out so I can get clearance. Is there a video on that?

[@melinaweberchinese]

Very useful 😁😊

[@yhbagis]

I bought a new gimbal crane 2S pro and Blackmagic 6k G2. Problem is I can't stop vibration and noise from gimbal crane 2S pro. I am using sigma 18-35 lens. Another important question There is one usb -c port on Blackmagic 6k G2. If I use Usb-c port for connection gimbel and Blackmagic camera, I can not connect ssd hard disc. Do I have to connect gimbel and camera for good result?

[@wedknotstory7628]

thanx a tonnnnn

[@jarvisquintana]

6:23 hello, the tilt axis of my gimbal does not press hard. Is there any way to tighten it like plate?

[@verygoodproduction4623]

How can I use (set up menu) camera control cable with Sony a7 mark 4?

[@viktorkray2064]

Hello, tell me what to do if I can not remove the pad on which the camera is held from the stabilizer, the stopper does not allow it to do so

[@raymondedwards5313]

Great explanation on balancing the Crane 2 S. However, my quick release base plate does not lock?

[@marcelbrandel9078]

hi, for that please go to this video kzbin.info/www/bejne/poWxlIWGZrerj9k and check 00:42

[@rzminiscreen8195]

Nice video,this is fully helpful,how can I purchase joystick button of my gimbal zhiyun 2s

[@fabian9812]

hi ! i just need to know how to balance the horizon line when it's on.

[@Ahmet-xy2ln]

this was soo helpful for me. Thanks! but i have a question. I use sony a6300+ 16-50mm. When i want to shot at vertical mode i cant balance completely. because a6300 is not that big as your camera. Crane 2S's roll axis is not long enough. i cant swipe toward left the roll axis. i hope i could explain :D need help

[@dafaputrapanglima9539]

Same problem 😢

[@JarvisVideomaker]

hello, my Tilt Axis loses the tie, can you help me?

[@JMLFeature]

I noticed that I can't balance "up" anymore on the tilt axis? (see this video at 6:16) . Do you know why?

[@Karlos3203]

perfect video,, one of the best.. i have a question is normal mi bmpcc+ small rig complete+sigma 18-35+metabones.. give me jittler videos with the crane s2? i balance well.. the motors are in low because in mid or high have to much vibration..

[@user-hk2vt3ee1l]

I have the same problem, mate. Have you found the solution?

[@Karlos3203]

@@user-hk2vt3ee1li move to dji rs2... i dont find any solution

[@WickedO1]

Small (maybe large) problem.... How do I store/ transport the gimbal when the extension bracket is removed and it is at 45 degrees? The gimbal won't fit in the carrying case that it came in anymore. And it's too large to fit into my camera bag.

[@papayawedding]

it will fit, you have to unlock everything and move arms to fit it, anyways then you have to balance it again from the scratch.

[@milkod2001]

i have this gimbal and it changes modes by itself. How to fix that? im using A7S3 with Sony 35 1.8G and thought the reason for that could be Full HDMI cable which is connected to Ninja V is making whole system unbalanced. But then again i have removed all and with only camera and lens attached gimbal is changing modes by itself. I have pre-calibrated all, set motor to autotune etc and issue is still there. Any ideas what could be wrong?

[@virginielefour5600]

I have a Canon DX Mark III and it's impossible to make the balance. It's too heavy??

[@squbbydoo]

My gimbal just says axis lock?? Any help

[@boundfordestiny]

Axis locks message - Do the axis locks have to be turned on after balancing and before powering up the gimbal?

[@marcelbrandel9078]

the axis locks need to be all unlocked before turning on the gimbal avoiding damages to your gimbal

[@SamRedgateLarge]

Mine comes up with axis lock? What does this mean?

[@surajrana2474]

How to control roll axis with wheel ?

[@HalloFilmz]

hey hello. may I control start stop recording with my bmpcc ?? if yes how? how connect it ? what type of cabel to use ???

[@hebehe462]

For BMPCC 4K/6K/6K Pro, use Type-C to Type-C USB cable to connect the Crane 2S and camera, then set the gimbal camera brand to BMPCC. Turn on the gimbal first, then turn on the camera.

[@NextLevelLawnCare]

Thought i had a balanced gimbal till i watched this video haha

[@calypzo5907]

What is axis lock

[@shankykirasoi]

bro. i don't see f mode in gimbal only show 4 mode

[@anchitsingh8114]

Can u please make a video about best Settings for *Zhyun* *Crane* *2s*

[@ajphotographycinematograph7035]

Hello I am Ajay I can't control my Sony a7III camera settings like(ISO Apur. Speed) with this Gimble how to control camera settings with this Gimble I was tryed all settings but still I can't Operate camera with this please help me. Thanks And this video is also help me how to balance and lock base plate on Gimble.

[@pabloleguy2329]

I have the same problem. could you find a solution?

[@alinabavi6025]

exclecnt

[@PradeepKumar-in9wo]

Axis locked is displayed on screen

[@anthony01311982]

Only if I knew this fir the crane 3S 2:55

[@WildVariantOwner]

Doesn’t share any real information, honest waste of time.