Crane V2 (new model) on Amazon: geni.us/D86vqC Crane 2 (7lb limit): bhpho.to/2wy4qHn
@nozar76 жыл бұрын
How are these for sound if you want to use them on a short film? Are the motors really loud? Thanks! Enjoy your reviews.
@thememoriesof48925 жыл бұрын
@@nozar7 doubt theres is any sound at all
@MaksimYuryev7 жыл бұрын
I kept seeing this question come up on forums and groups, so I made a video! Now onto making a full review video with sampel footage from the V2.
@2greenhorn7 жыл бұрын
I think Brandon Li covered this kind of review also on his channel
@irineosk68434 жыл бұрын
That was very helpful. I found a guy who's selling his V1 for 150€. Gonna try it tomorrow and probably buy it. Thank you for this review /comparison man:)))
@lorenzwie7 жыл бұрын
Hey Max, if you had to pick between Moza Air and Crane V2, which one would it be?
@BartJohnsonProd7 жыл бұрын
Hey Max! Great video pointing out the differences. God help us all when the Crane 2 comes out and people try and keep the models straight!
@ShivendraSangwan6 жыл бұрын
Max, they recommend keeping the camera closer to the motor side, so always set your camera to the leftmost position and adjust the rear side
@_rhapsodist7 жыл бұрын
Totally happy with my v1 :)
@blakejohnsoncsr6 жыл бұрын
Thanks for your videos as always. I'm glad most of the questions i'm searching in youtube your videos are already there at the top! Winning!
@floatingrabbit35565 жыл бұрын
My dude, maybe my v1 is broken or something but let me know if it is working right.. So the gimbal coupled with my a6300 and tamron 18-200mm weigh up to 1100g which is perfect. But I understood that the gimbal rotated 360 degrees on all axes however, only the pan does the full rotation but the roe and tild only go about 45 degrees and just stop there. Is that ok? I prebalance everything till is correct on all axes and not leaning forward, back left or right it hold its position perfectly and then i power it on but i do not get full 360 on the tilt and roll. Is this how the gimbal should function or is it faulty in those two axes? Really appreciate tue feedback if anyone ever sees this.
@charliedinh10242 жыл бұрын
Easy to assemble, good strong materials, feels good, looks good.
@lalrinmawia49296 жыл бұрын
What would you prefer? The Zhiyun Crane v2 or the Zhiyun Crane 2? For the Sony A 6500 mirrorless camera with the 18-105 lens.
@adriannepaulugaban31935 жыл бұрын
V2
@PolsPeter4 жыл бұрын
Hi thanks for the video. I bought a Crane 1 secondhand. My question for you. Does it support the App for remote controll. I downloaded the App but it does not make connection to the Crane. Does Crane 1 have bluetooth? Thanks for your answer in advance. Greetings Peter from Holland
@RiseHigh7 жыл бұрын
Hi Max, *thanks a lot for this review* ! I think that i'll wait till the *Crane 2* comes out to see if i go with this one or the *PilotFly H2-45* . Have you tried this one ? and if you have what do you think about it ? Thanks for your great content!
@nyrubin7 жыл бұрын
Rise u can pull focus from the gimbal. I think that beats the pilot
@TheMicroGhost7 жыл бұрын
Rubin lopez but only with canon cameras at the moment !
@LouMonestime6 жыл бұрын
I’m not sure why but I can’t get my camera to stay in place when attached to the v1 it slides and rotates on the mount. any tips on what I can do to fix that? Please reply.
@PostColorGear7 жыл бұрын
Thanks for doing the side by side Max. I still see value in the V1. (especially the joystick)
@agro06 жыл бұрын
They basically switched from a PS4 analog stick to a PSP analog stick :D
@taomicioli5 жыл бұрын
More like an osmo knob
@cudak8884 жыл бұрын
Keeping track of these is nothing short of interesting. I bought a V2 a while after they came out, and I swear it had the V1's three-slot plate in it. Just to add to the confusion, a buddy loaned me his V1, and though otherwise identical to the one in your review, it's finished in the same bead-blasted, black anodized aluminum throughout, without the lighter grey anodizing over the motors. Go figure.
@ForgottenChornobyl7 жыл бұрын
You mentioned issues with upgraded firmware for V1 when shooting with lighter cameras. Is it a common problem? I'm considering buying used V1 but it had an upgrade installed, my camera + lens weights 800-900g total (X-T2).
@bimmercrazy17 жыл бұрын
Thanks for all your great content videos. Have you had any luck with the 16-35GM on the Zhiyun Crane v2? I have balanced it with my a7RII multiple times before turning on with no issues. But when it starts up in pan follow mode, it goes into a crescendo panic vibration after a few seconds. Double tapping to full lock mode, it's just fine. Pressing once again to go to pan following mode and it vibrates again. I know it's a semi-heavy lens but my a7RII + 16-36 GM + Oben QRA-R2A Quick Release are under the published limit if B&H specs are correct. I bought it before the Crane 2 came out and am now regretting the Crane v2 purchase at this point. It never had any issues with a Panasonic FZ-1000 on it. Any advice would be most appreciated.
@josefrodriguez74416 жыл бұрын
Max do you have experience using either one of the Cranes with a camcorder, specifically a Sony FDR AX100?
@epvideos64766 жыл бұрын
Hey Max! I recently purchased the Zhiyun crane and I been in a constant battle with the "Roll" When Im walking through a house (real estate videos) and round a corner into a room the gimbal rolls about 5-15 degrees and takes FOREVER to recover back to level position resulting in a worthless shot because the room is crooked, how can I fix this??
@ImGallagherr7 жыл бұрын
Hey, would you be able to show how to balance the sony on the V2? every time i do it, the metal bits bump into each other. just wondering if it happens to you, and if not, how can i get around it? thank you!
@dubstepzsi5 жыл бұрын
i dont have any gimbal is it worth me getting the second one? i mean the diferences between the two i feel is more of a 0.1 patch upgrade to fix the inconvienainces rather than a different version upgrade and i never knew there was another 2 out as in Crane 2 is it out now? the reason why i am saying this is i am wondering if it is better value for me to buy the first one get some DOP work wait untill they do a propper version upgrade like something to go wow and write home about then upodate is this irasional thinking? my budget is £400.00 ( i can get a crane 2 for that else were i have seen ) also what is the diference between the crane 2 and the Zhiyun 2 again is there a siginificant difference between the two?
@Chilcutte6 жыл бұрын
I got the 2nd one and Have the GH4 so I AM super glad you posted this
@serkanreis7 жыл бұрын
R.I.P. Eskild Fors 😢
@abhishijack7 жыл бұрын
Hey Max, I was watching one of your videos and one of the suggestions was a Channel featuring you and your brother! It's mostly about Apple products and I can't find it anymore. Which channel is it? Why isn't it linked to this channel?
@Clayphish7 жыл бұрын
Abhishek Shah appleinsider
@tonymoua10586 жыл бұрын
Hi. Thx to ur review, i just bought a second hand V1 & loving it. Just want to know if the joy stick is supposed to bounce back to the center after it's moved. Mine doesn't seem to bounce back. Thx
@pegasikfoto5 жыл бұрын
Отличный обзор и сравнение, спасибо!)
@montjamz6 жыл бұрын
So using the crane v1 with a sony 6300 and a Sony 4/18-105 G series is totally doable.being its under 850 grams right?
@creativeworxstudio6 жыл бұрын
What is the maximum weigt the v1 can carry with the software upgrade ?
@RezaMolavi5 жыл бұрын
Thank you Max. I cannot find anything on v2 on the Zhiyun site (firmware specifically). will it be just as same as Crane? I am very new at this and just learning. Thank you in advance.
@MaksimYuryev5 жыл бұрын
Yes it will be the same, just more user friendly
@RezaMolavi5 жыл бұрын
@@MaksimYuryev thank you Max.
6 жыл бұрын
hmmm i thought the version one only supports 1200g max ? or can i top that a bit ?
@adventureriders45157 жыл бұрын
Can u take the screw off bottom part and batteries from v2 and use it on v1?
@Alex-qe2lf6 жыл бұрын
i am looking to have the basic set up of a7iii+1635mm F2.8 GM, total payload of 2.93lbs. In terms of balance, is the crane plus doable or do i need the crane 2 (a little heavier and a lot more money).
@lawrenceon16676 жыл бұрын
Hi Max, Do you know if you can charge the zhiyun crane v2 with the batteries inside? Or do you need to use the external charger supplied?
@mgr55506 жыл бұрын
Max > Can you help me how to factory reset the V2. The pan and tilt forward doesn't seem to be following well on my brand new V2. Thanks a ton !
@alexmacgregor7 жыл бұрын
Good video Max. Maybe you can also look at the M? Thinking about buying that one.
@markgeraldgamboa24617 жыл бұрын
if i am using around 800g camera which one should i choose?
@dermotoc95946 жыл бұрын
Thanks for the info on the 1200g vs 1800g firmware differences. VERY important to know, as my camera & lens is under 1200!!!
@BushidoPhoto7 жыл бұрын
Excellent video, I just picked up the V2.
@juupafilms6 жыл бұрын
if i want to shot with 70D and a sony A7S II ? It's will be not optimize???
@tommasomgouery98646 жыл бұрын
I JUST GOT THE V2!!!!
@justinspirational6 жыл бұрын
thanks for your video.. I heard the v2 doesn't balance well with the panasonic gh4/gh5 etc and sigma 18-35mm f1.8/speedbooster combo yet the v1 does.. any idea why that is? I just ordered the v2 but may have to return it immediately..
@HashMahmood6 жыл бұрын
hey I have the Sony a6300 and Zhiyun crane v1 I want to use it with the mc-11 adapter and 18-35mm sigma lens. will it balance on the gimbal or will I have to update it to the 1800g version?
@DavidKatz7 жыл бұрын
Great review dude !! Thanks for doing this !!
@seek3n6 жыл бұрын
zhiyun app no longer support the crane v1?
@urartcray7 жыл бұрын
Are you going to be making a threadripper build video?
@MrNeisonpromise6 жыл бұрын
Which one is best for my Canon eos 550d?
@RK1FX7 жыл бұрын
Max I have a question. Can one of these be converted to a smartphone gimbal? its a shame to have to carry a sh*t ton of equipement these days...
@TohPhimmasenh6 жыл бұрын
Hi can you please reply to me ? I'm just wondering what you do to get this good-looking video? I like this kind of video looks please tell me what to do I'm just a beginner
@JeffSpeers6 жыл бұрын
Is it a manfroto 501 compatible plate system on the v2?
@edertzen5 жыл бұрын
¿Did any one tell me the lifetime average from the Zhiyun Crane V2?
@tonymoua10585 жыл бұрын
Can you swap the handles between the two?
@discaged67236 жыл бұрын
i own the crane v.1 with a g7 which is under 1200 gram, but i wantet to use a heavier set up with an a7rii and a heavy lense (alltogether1500gr). So i stumbled across A website which discribes this jitter problem and so i did some more research. I found an article which stated that the problem is now solved. I wantet to contribute but i cant find any sources right now. I did the latest firmwareupdate 1.5...anyway and from my understanding you can choose between 3 levels of payload in the zhyiun mobile app for light, medium, and heavy set ups. If anybody could clarify this issue it would be much apreciated, because when i am connectet to the mobile app and switch the set ups it is automaticly changed from light to heavy payload and it works just fine. So i guess people shouldnt be afraid to make the firmware update and switch between set ups with different payloads !
@standfest_party5 жыл бұрын
Thanks for review! I'm for the package with V2 :)
@workofartur7 жыл бұрын
are you going to do a threadripper build step by step Max?!
@MaksimYuryev7 жыл бұрын
Sorry, not on this one. This case and some of this gear was tough and took a long while. Maybe with another X399 build.
@ninali53525 жыл бұрын
Mine is broken and service very very late to reply and let me ship back and pay all cost....
@cdbefus6 жыл бұрын
Great comparison
@eganeggzythornycroft10845 жыл бұрын
TOOKEN IT OUT. nah but actully a good review. Great comparison
@DarthVader19775 жыл бұрын
actually*
@IslandsOfFun7 жыл бұрын
Great review!! Awesome
@costas42877 жыл бұрын
Can I put a fuij xt2 with the grip?
@costas42877 жыл бұрын
Will the gimbal work with the fuji xt2 plus grip?Is it to heavy with with the grip?
@ToastedSynapseGaming7 жыл бұрын
So the new version's joystick is lile a PSP if V1 is PS3
@SullyCortez7 жыл бұрын
Only canon cameras have the focus ability in the Crane 2 :/
@okayvito6 жыл бұрын
Damn he really loves his gimbals lol (06-26)
@MrWTFblackscreen7 жыл бұрын
are you the guy from russian rider!?
@natashakidsart96955 жыл бұрын
Максим, почему на английском?
@LiteGaming107 жыл бұрын
🤔 Wanna... Do a Ryzen Hackintosh like SnazzyLabs 😉 Oh I'm the dude at amd-osx that helped. I'm bord...
@TheBeardBringer7 жыл бұрын
I got my Crane v2 on Friday, used it for a few hours on Saturday, and it broke the first day. Have you experienced this problem? with the light blinking, not being able to connect to phone or computer, and motors not working anymore? kzbin.info/www/bejne/fqe0dKiNhKmCjNE
@TravelWithFriends7 жыл бұрын
I also didn't upgrade the firmware on my Crane v1. Battery life was never an issue for me. That quick release plate is really interesting tho. I think it's not really worth an upgrade for what I do which are mainly travel videos like these kzbin.info/www/bejne/iV7OgneXfLerl8U
@wasoe65747 жыл бұрын
Color grading is on point! Nice video
@digital.garage6 жыл бұрын
Incredible quality.
@fjaajf7 жыл бұрын
the ZH sounds like J when you pronounce it.
@StreetsOfVancouverChannel7 жыл бұрын
Grooooovy...
@ninali53525 жыл бұрын
Service is too bad.... always no reply.
@TheAvlis247 жыл бұрын
whats up peeps!
@MCCYELLDEFFEBAUGH2 жыл бұрын
I have a v1 for sale
@discaged67236 жыл бұрын
i found something. i guess the problem is solved now with firmware update 1.52 kzbin.info/www/bejne/rnuup3eoe793edU
@blacklikepepper70087 жыл бұрын
clickbait in some way. who the fuck will buy v1 ? its v2 or 2...