ZHIYUN CRANE 4 Official Tutorial PART 1: Setup and Balance

[@MamoAir]

Thanks for sharing my tutorial! Great gimbal! 🙂

[@robinsainiphotography]

great review, If one has to attach an Atomo Ninja on Zhiyun Crane 4 how can one do it, I don't want to add it on top of the camera for sure as that makes the camera heavy .. can u share some information on this.

[@mistamiyaki]

Just got this bad boy and I'm setting it up....

[@him_studio]

Please don't buy this think. Crane 4 after 5 mounths it's decided to stop working. And all this issues appear at same time Crane 4 "update failed" it doesn't hold any charge it seems to attempt to update, then "fails" plugging into my pc doesn't give it any life can't connect to ZY play to update it

[@danielpenn6661]

Perfect. Much appreciated

[@hugorivas2781]

Thank you very very much!!

[@gonzastudios2036]

Please help advise me, does the crane 4 support and work well with the ursa mini pro 12k with the sigma 18-35mm and a v mount battery or I have to use

[@him_studio]

Please don't buy this think after 5 mounths it's decided to stop working. And all this issues appear at same time Crane 4 "update failed" it doesn't hold any charge it seems to attempt to update, then "fails" plugging into my pc doesn't give it any life can't connect to ZY play to update it Becareful

[@denisokolovv]

I have not found any zoom/focus motor instalation on this gymbal, can you do it please. 😊

[@1Menzy]

Informative 🎉

[@jayyarbrough4497]

Thank you! Tremendous job

[@moniqued8932]

Hello, I was wondering if I can connect an external monitor to the grande 4, I don't see any mounting option on the gimbal. How and which connection can I use for this?

[@gonzastudios2036]

Helo, i would like to find out if the zhiyun crane 4 can carry the ursa mini pro 12k with a sigma 18-35mm and a standard v mount battery.

[@KGMIproductions]

can not cconnect to mobile app it says activation failed

[@زكرياعارف-و6ي]

YOU are great

[@moniqued8932]

I have the canon R6Mk2 x RF 100mm Is that too heavy a combination, or is the lens too heavy, should I leave the lens hood off?

[@chenlyn-cj8ve]

not sure if it can be well balanced or not. not find the lens in the compatibility list. zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20240328/1711614346887-6MTD7KJn.pdf

[@takanakuyvlogs]

I feel very sad for the reason that it is not compatible with fx30 could you please update to be compatible with fx30 either by cable or Bluetooth

[@zhiyunsupportglobal706]

Hi! You can check CRANE 4 Camera Compatibility List (Camera Control) here: zhiyun-website-shenzhen.oss-cn-shenzhen.aliyuncs.com/instruction/20231201/1701418838971-4hMQwDzr.pdf page 10. Sony FX30 is on the list. 😸

[@him_studio]

Please don't buy this think after 5 mounths it's decided to stop working. And all this issues appear at same time Crane 4 "update failed" it doesn't hold any charge it seems to attempt to update, then "fails" plugging into my pc doesn't give it any life can't connect to ZY play to update it Becareful

[@creativegreatsvisuals]

I'm using c70 on the crane 4 and the pan access starts spinning left after I balance

[@gocproductions5]

I’m doing everything you are with a bmpcc 6k pro and not getting results. This sucks. How do I know if I have a bad motor on my Gimble out of the box?

[@NevaFold-y5z]

Well while you’re setting it up it wouldn’t be a motor, but I’m having the same problem…it’s the last step. Everything balances fine until I move the last lag and can’t get it to stay straight when I’m tilting it

[@VamsidharMuggulla]

Gimbals became very complex to balance. Crane 2 is the easiest of all yet, Run and Gun for weddings.

[@kamenwaticlients]

Im having a hell of a hard time balancing the R5C w/ Dual Fishete on it

[@Svetoslav_Yari]

Good afternoon! I bought a "Crane 4", but I have been charging it for the 3rd day. What could be the problem, please tell me? Charging: DEXP IET7CD02. Output Current: USB A: 5V, 3A; 9V, 2A; 12V, 1.5A. USB-C: 5V, 3A; 9V, 2.22A; 12V, 1.67A. Tell me what to do? Need more powerful charging, or something else?

[@Svetoslav_Yari]

@abdufilms7989 Hi! I eventually returned the device back, and took the Ronin DJI RS3 Pro

[@unboxmusefr6359]

Thanks for the video!! But there is 0 use of the first plate attached to the camera unless you have huge cine lens attached and need that little extra place! This information is important.

[@FoxyTheFancyFox]

it's a good gimbal. If it works.... At this very moment, I'm on the 3th one. That broke when I didn't use it. The first one didn't turn on. The second one did turn on but after I charged it it didn't anymore. 3th one worked fine! Used it. Charged it. But after 2 weeks I needed it again. Didn't touch any settings at all and was balanced perfectly. But for some reason, the motors started to shake. When autocalibration it just would beep and shake and didn't respond anymore. Lowering the strength did work a bit. But cmon. This device is 700 euro's. If the autocalibration doesn't work. Don't put it on the device. Was really excited but sadly it's gone be another brand for me.

[@TheDarknight3x]

Is anyone having a problem with charging this Crane? Mine just shows charging, but never fully charged. As soon as I unplug it, it won't power up at all.

[@him_studio]

Please don't buy this think after 5 mounths it's decided to stop working. And all this issues appear at same time Crane 4 "update failed" it doesn't hold any charge it seems to attempt to update, then "fails" plugging into my pc doesn't give it any life can't connect to ZY play to update it Becareful

[@TheDarknight3x]

@him_studio yeah, I returned mine. This product is absolute garbage. Brand new, not working straight out of the box. Completely sad product. I hope more people see your post so they can avoid this gimbal.

[@martinmoyamaschine7723]

👏👏👏👏🙏

[@alexanderafgan9594]

Just a suggestion, the people who’s gonna buy a crane 4 are not beginners so I guess you don’t had to dumb down so much

[@DVAND]

Bought crane 4 and damn it’s very disappointing had to go get a ronin .

[@MARTUNGRIGORYAN1]

my gimbal not turn on upgrade failed

[@zhiyunsupportglobal706]

Hi! Sorry for the inconvenience! Please provide us with the SN of the gimbal and related video so that we can record this situation!

[@him_studio]

Please don't buy this think after 5 mounths it's decided to stop working. And all this issues appear at same time Crane 4 "update failed" it doesn't hold any charge it seems to attempt to update, then "fails" plugging into my pc doesn't give it any life can't connect to ZY play to update it Becareful

[@Casadealphaville]

Man, look how crazy the Crane 4 is with the FX30 or A6500 and a Sigma 16mm lens, it stabilizes well, but when I exchanged it for the 11mm Sony lens, both on the a6500 and on the FX30, it can't stabilize because the lens is very light and When I pan and tilt the gimbal is shaking, I thought this was a huge flaw in the Crane 4. It's a real shame

[@gl4886]

Did you lower the motor ? Can you? With the Crane 2 you can set the motor to low, medium, high depending on the weight of the camera. If it’s on high with a light lens it will shake.

[@motoprofoto]

2 CRANE 4 DEAD IN 10 USES. THE FIRST JUST AFTER UNBOXING. NOT CHARGING AND UPGRADE FAILED SAYS. THE SECOND AFTER 10 USES THE SAME PROBLEM. DONT BUY THIS GUYS

[@DVAND]

Common issue so so sad