Great video! Tabs and fins! Here is the way I set them up: Use a straightedge on the bottom and make all tabs perfectly parallel to the bottom. If the tabs are 1/16 off the bottom, there should be a 1/16 gap the full length of the tab, along the straightedge. You can't eyeball this, as .010 inch will make a noticeable difference! Check and double check all 4 tabs. They must be completely parallel with the bottom. Use that straightedge to make sure the stinger drive is parallel to the bottom as well. No need for any stinger angle. Next, use a square on the bottom of the boat to check the turn fin(s). They must be 90 degrees to the bottom. Not 88 or 92, but 90. It makes a difference. Once all tabs are parallel, raise the left inner tab 1/2 turn. This gets rid of the right "lean". That's it! If you want to make the boat "looser" or "tighter", adjust only the inner tabs, and always keep the 1/2 turn difference. You should never need to adjust the tabs more than 1/2 turn either way, unless something is wrong... Full throttle until the race is over! If you think that rudder is too long, try a short rudder while there are 5 other boats out there. See which one goes around a corner in white caps, and which one is upside down! -Uncle Joe
@MCsCreations5 ай бұрын
Awesome boat, JJ! It's fast as heck! 😃 But it looks freaking smooth on the water as well! Anyway, stay safe there with your family! 🖖😊
@scottallen41315 ай бұрын
Enjoy seeing you posting again after the winter break! Man you sure make everyone want to build a zippkits boat!
@prospenda5 ай бұрын
Sweet build, brother. I need to get myself one of these.
@lotuse4205 ай бұрын
super close to finishing my first mono been watching your build series for help it so good to see yours hauling butt on the water cant wait to get mine out also excited for the trim vid tomm as i have no clue keep up the great work man
@boatwerks5 ай бұрын
Good to see more videos from your channel long time subscriber
@N2SRC5 ай бұрын
Nice build JJ
@twistedliquidrcboats5 ай бұрын
Really nice maiden voyage for the Zippkits Supersport JJ. Just do me one favour, avoid the ski buoys please Lol Lol Lol!!!!!
@jjrotogeek5 ай бұрын
thanks brother, yeah those things suck to get around lol
@jjh.rc.videos88635 ай бұрын
Looks good! Just needs a little trim on tabs and maybe the drive to get that wobble out. Looks like a cnc case, prob gizmo motor..
@autoprefecture65915 ай бұрын
he's back!
@ebandcamp5 ай бұрын
Congratz !
@gerardrusso96425 ай бұрын
i have the same boat mine is crazy fast also my setup i have and adjustale strut controlled by a 3rd channell same prop trim tabs do make a big difference in the turns it rides almost on the gunells
@VintageEngineRepairs5 ай бұрын
I’d love to see a tachometer on these when on water
@jjrotogeek5 ай бұрын
wheres the boat you were building brother LOL
@VintageEngineRepairs5 ай бұрын
@@jjrotogeek still in the shelf, about 1 arms reach away 🤣 I’m at a sticking point! LOL
@jrb80815 ай бұрын
Cool
@bobpugh64305 ай бұрын
Nice Boat what engine did you use? And why is the Flag on the ground???
@jjrotogeek5 ай бұрын
Hey brother, Gizzmomotors 30++. What Flag on the ground????
@palehorse73775 ай бұрын
looks like a bonzi engine. at least to cooling jacket is a bonzi.
@TecraTube5 ай бұрын
you know what yhey say about guys with big rudders, right?