Zippo lighter restoration - US Army lighter brought back to life

I will restore this Zippo lighter someone had found from the ground. It was most likely lost by an US army man years ago, but I don’t think it has been in any war. The lighter is very oxidized and most of the old plating is gone. The insert is in much better condition but it also need a little restoration. Luckily the hinge is not broken so I don’t have to repair it. That is not easy.
I started the restoration with disassembly. The lighter doesn’t have many parts so this was easy to do. I used a miniature propane torch to loosen the emblem. I decided to use rust remover for the steel insert and ketchup for the brass shell to remove oxidation.
After oxidation was removed, I needed to sand off the remaining old plating from the shell. If I didn’t it would be really hard to get a good finish on the piece. After sanding the plating off I polished the parts with wool buffing wheel and metal polishing compound.
Before I could re-plate the polished parts they needed to be cleaned from grease and polishing compound. I used acetone for the job. Then it was time to replate the parts with nickel. I used electroplating method. You can learn more about that from here: • How to make simple DIY...
After the plating, I attached the emblem back on with some solder. I used flux to help the solder flow between the parts. It might look like the solder didn’t go between the parts but it only needs very little solder in there because the layer is so thin. As you can see I scratched the part quite violently and it sticks.
Then I assembled the rest of the lighter and added new cotton, wick and other parts on the inside.
A free way to support my channel is access amazon/ebay to do your regular shopping through these links. I will get a small fee from each product bought on amazon after clicking these links, whether it was the linked product or a different one.
---------------------------------------------------------------------
Patreon: / oddtinkering
T-Shirts: teespring.com/...
Instagram: / odd.tinkering
Tools used in this video :
NICKEL ANODE: amzn.to/2J62kTy
NICKEL PLATING SOLUTION: amzn.to/2oW
RUST REMOVER: www.mc-51thebe...
ZIPPO WICK: amzn.to/2T5C0Nr
ZIPPO FLINT: amzn.to/2us5T2o
ZIPPO LIGHTER FLUID: amzn.to/2T4UgXi
ZIPPO COTTON & FELT PAD: amzn.to/2VgMpbJ
SCREW FOR FLINT: www.amazon.com...
Other tools:
ROTARY TOOL: amzn.to/2WF75I6
PRESS FOR ROTARY TOOL: amzn.to/2Uiv1Eu
2-AXIS TABLE FOR THE PRESS amzn.to/2WPkttl
POLISHING KIT: amzn.to/31w983l
CORDLESS DRILL: amzn.to/2Wois77
CHUCK NORRIS’ TOOTHBRUSH: amzn.to/2YfXUj2
MY FILMING GEAR:
MAIN CAMERA: amzn.to/2JvtKox
MAIN TRIPOD: amzn.to/2OlpYgn
MICROPHONE: amzn.to/2I80iDz
VIDEO LIGHTS: amzn.to/2FpJDaB
MAIN LENS: amzn.to/2Fm8yMk
CINEMATIC LENS: amzn.to/2TmNdHH
WIDE ANGLE LENS: amzn.to/2U7iJha
GOPRO: amzn.to/2U3eqU3
---------------------------------------------------------------------
SUBSCRIBE ▶▶▶ www.youtube.co....
---------------------------------------------------------------------
Restoration playlist▶ www.youtube.co....
---------------------------------------------------------------------

[@bluevaultsuit6426]

So nobody’s gonna talk about how sick those lighter tricks were at the end

[@Defaulttt]

I don't know how the hell he snapped back the fire lol.

[@ghassanebadii8007]

@@Defaulttt same dude

[@dynamicdylan7391]

@@Defaulttt its easy

[@kristianafaga2149]

@@Defaulttt the trick it's called twilight zone

[@Darius23s]

I know the tricks;) Just buy a Zippo you will want to leartn it

[@-acne]

“Liquid ice” Me, very confused: What does he mean, liquid... *oh* (I seriously didn’t realize he was talking about water for a good 10 seconds after reading the label)

[@crimson185]

Acne Acadia Same lol

[@lukenotskywalker6828]

I didn't realise until i read this comment.

[@Sunshinelovelystar]

i love ur profile pic

[@Nathanchancy02]

Same

[@simoney3001]

I was like tf what is that stuff

[@outformunch8490]

"Remover of Rust" sounds like a superhero.

[@corison2058]

Mamacube (evil villain laugh) ha ha HA! It’s is i! The Oxidizer! I will spread my corruption EVERYWHERE!”

[@outformunch8490]

@@corison2058 best comment!

[@jamesesterline]

Or the title of something from r/bossfight

[@1337fraggzb00N]

Corison20 Iron Man leaves the chat.

[@amongustrollsinging4595]

1337fraggzb00N Silver surfer has left the chat with iron man

[@PoisonPurple]

"Liquid Ice" Ah, yes. I remember him, along with his brother... "Solid Water"

[@lemonzess4202]

That sounds like a name in a Hideo Kojima game.

[@Smthn_Wicked]

What about the third brother *F L O A T Y W A T E R*

[@gentlestormtoo]

Don't forget it's sister *steam water* !

[@matthew1420]

Don't forget the mother jello water

[@memesgameyes2467]

Asim Haider - SAM no WATERY SOAP

[@kino_verite]

I love how you’re including little amounts of humor every now and then - keeps it fresh and engaging.

[@thegoodguy44]

His attempts at humour would only be funny if you were 7 yrs old. They are just annoying and cringeworthy.

[@microsoftpowerpoint3039]

The Good Guy you just don’t have a sense of humor

[@gildieuaffn]

@@thegoodguy44 Literally no one here will agree with you sorry bud

[@vagueequinox7543]

@@thegoodguy44 they are stupid. And I love it

[@seantaggart7382]

@@thegoodguy44 oh YOU LAUGHED AT THE LIQUID ICE I KNOW YOU DID!

[@EmirhanVanDe010]

It’s 2 am and I’m watching a guy clean a lighter with ketchup, life is wild man

[@wyattbroussard2680]

Bro literally me rn 😂😂

[@rsolsjo]

"Ooh I think he'll use some special chemical!" *covers it in ketchup*

[@WETVFirst]

some time👍

[@tclearinghouse]

He uses a lot more ketchup on his lighter than I typically do.

[@alexandertran9387]

Lol👍🤣👍

[@Elijah.04]

Also liquid ice

[@corison2058]

Robin well you weren’t wrong.

[@patvawn2637]

Hey, I just thought you should know, but a channel called "Best Relaxing ASMR" is stealing your videos and claiming that its theirs. You should probably do something about it.

[@Wishes_for_Fishes]

That's shitty. Why do people gotta steal other's hard work.

[@Kuromipawz]

@@Wishes_for_Fishes Cause some people are jackasses and think they have the right to do anything they desire.

[@notad-class3899]

I checked it and they placed his channel in their description so its a small bit ok.

[@viziro4722]

@@notad-class3899 Not really, they still didn't have permission, credit or not which giving credit and not actually having permission from the person who uploaded the song/video/etc. isn't allowed on KZbin from what I remember.

[@hollow885]

But what if they need to feed their families

[@generalantilles2586]

Everyone's on about restoration skills and the lack of music, but can I just commend you on your dedication and creativity? I don't think these videos would be nowhere near as entertaining to watch. Setting up for some of these shots has to be time consuming, but the execution is top notch. Great job with everything, the restoration, the camerawork, the jokes, and the editing! Edit: I meant to continue the second sentence. What I meant to say was that I didn't think these vids would be nowhere near as entertaining as are if it was just shots from the same camera angle.

[@corison2058]

General Antilles wedge?! What are you doing here.

[@OldMiley]

Absolutely nothing wrong with the lack of music. Makes a refreshing change. I'd rather this way than some bollocks being played over it

[@qqqqqqqqqqqqqqqqqqqqqqqqqqw]

creative? :d it's a copycat channel

[@qqqqqqqqqqqqqqqqqqqqqqqqqqw]

@John Doe Lol I don't mind but I wouldn't call it creative sweetie

[@samarawhite9025]

@@qqqqqqqqqqqqqqqqqqqqqqqqqqw pretty sure there are many people in the world who enjoy restoring things. One person, doing it just brings those other people out. So chill

[@bhaweshthapa4672]

his next video: *restoring Egyptian mummy , bringing her back to life*

[@someguy2297]

Ah yes *HER* I wonder.

[@joebenson528]

@Alexander TRAN I just killed a tiny spider just like that a couple minutes ago. I thought i was a victim of a full scale invasion. (i'm also a burned out moron at the moment.)

[@thephelddagrif2907]

Restoration is a perfectly valid school of magic, and don't let anyone tell you otherwise.

[@Phoenixfirex]

I'm more of a Enchanting guy myself, but i agree.

[@smiley3972]

Men of culture I see...

[@brodud4020]

I hear the college of Winterhold is accepting new recruits.

[@franzfl]

just make a bound lighter with Conjuration.

[@seantaggart7382]

Hey magic is not like that harry potter stuff Magic is from the soul Anyone can use it

[@sloomslam4064]

"Why does this flame smell like ketchup?" *Nervous sweating* "No reason"

[@someguy2297]

HMMMMM iNteResTINg

[@zhankazest]

why are you smelling the flame in the first place

[@teongcheekai6004]

*Can you restore the amount of people saying first*

[@user-pi5xz5je4y]

First.

[@Justanothert3chguy]

Primero 1

[@miladicanimations7759]

Second Does it count?

[@TYBERR]

No, they are beyond repair

[@denniswhite166]

848th

[@nelliebachesneg6655]

"felt pad thingy" Ah yes, thank you for using the technical term.

[@Vinterfrid]

And also for placing that "thingy" upside down...

[@jmzthree]

The felt pad thingy is for holding an extra flint, not for filling up with fluid

[@narwhal9852]

@@jmzthree yep as he so kindly showed us

[@scarlettefoxx5585]

I like how he just flexes all his hammers on us

[@tobyaustin899]

I have more coz I waste all my money on crap

[@yes-ck7fu]

Lol i looked at that comment right as he did it

[@zappiestlynx9567]

Some dad-chad energy. Not sure it was a flex tho. I’m pretty sure it was a joke that went over everyone’s head where he reaches for a hammer 200 times the size of the lighter.

[@berennicholas5003]

Jeremy Clarkson would be proud of his collection

[@marwanahmed6294]

Scary tho!! 😆

[@chris15252]

Awesome resto. Just wanted to share a small tip on the solder joint for the emblem. To keep the joint seamless for such a large emblem you can clip some small pieces of solder and flatten them with a hammer. Then you just put 1 or 2 of those chips on your flux and put the emblem on top of it. Clamp the piece like you did and heat up around the emblem for a bit to warm up the flux and surrounding metal. Then aim at the emblem until it settles into place. That’ll keep the solder joint on the back of the emblem instead of on the edges.

[@Ethan-uq2ew]

what's the difference between a hippo and a zippo? one's really heavy and the other's a little lighter

[@ivarwb4115]

Took me some time, but it's really a good one!!

[@Phoenixfirex]

Oh you Sunnava... That was bloody brilliant.

[@aenean.]

Nice. 😂👍🏼

[@cashkro4010]

you’ve earned a sub my good sir

[@corison2058]

Ethan Shong womp womp! 😅 still got a laugh from me so, here ya go! 👍

[@flightmaster178]

That Zippo was made in March 1991. I can't believe that it was that badly worn down, and I can't believe it looks that great! I found a 1962 Zippo metal detecting that was filled with rust inside. It took two hours to open, and I went through it and got it repaired and working well again. One one hand, I like the wear marks and whatnot as it tells a story but on the other hand I love how yours turned out!!

[@ratboygirl]

6:01 "lol that sorta looks like ketchup" 6:14 "oh wtf it is ketchup" not what i was expecting lmaooo

[@miladicanimations7759]

I thought it was red paint stripper or something

[@ratboygirl]

@@miladicanimations7759 same, tomato sauce was the last thing on my mind

[@zoflo4273]

I clicked on the video thinking it was ketchup cause of the thumb nail. Didn't expect it to actually be ketchup though.

[@ArtyDarth]

Everyone: "I didn't know what liquid ice was, but then I realised it's simply water! That's so funny." Odd Tinkering: "Yes... funny." *[opens his browser and goes to that super secret website that sells this liquid ice]*

[@Renato-gc2hg]

Dont understand how people can dislike this

[@lucasc5622]

i hate rescuing history >:(

[@girlsdrinkfeck]

u cant please everyone thats why ,some people like people to talk in video some dont ,thats 1 example

[@rusty4454]

Probably bots

[@TheActiveAssault]

Too many ads (4 in 1 video)

[@marty01957]

@CSP's Random You mean like the guy who took a new pair of pliers, removed the plastic hand grips, threw them in the dirt for a month then did a restoration video! Lmao! He got a lot of dislikes!!

[@nubsal]

A century later: repairing a US army lighter than was repaired a century before

[@liv8333]

I wonder how many people were like “DAMN LIQUID ICE THAT SOUNDS REALLY COOL”

[@daneschneider5790]

Me, I was that person

[@Cosmic_Waffle]

Me. I'm one of the dumbasses.

[@narada6329]

Noah Forman and where I come from it’s called boiled frozen melted liquid

[@liv8333]

Woah

[@seantaggart7382]

I said it And went Oh you sly little guy at the same time

[@jacklephoenix9078]

Thank you so much for making videos like these. You've inspired me to restore my Gameboy Advanced SP and got me back into tinkering with things. Your videos are also very calming and relaxing and help me a lot with anxiety and stress. Thank you again for your videos and for your clever humor. I'm sure this will get buries in the comments section, but I hope you'll see it~

[@Ghosdeadly]

Can you restore my life?

[@kontensampah3629]

yea maybe because he's smart :)

[@vios688]

@@kontensampah3629 smart ? wise buddy,, not smart.. he is wise guy... don't fucking underrate him okay ? fuck!

[@Zonose]

@@vios688 Uhm, he's smart too... calling someone smart isn't underrating them, but I can see why it would seem that way for you. 🙂

[@WETVFirst]

maybe, I think 👍👍👍.

[@emmerdoodle8517]

Volition you can :D

[@rajshah7433]

I really like it this way: pure talent and no cover up required. Please always keep it this way because this is how life has always been for all the great discoveries...no sound in the background and just creativity

[@geoffquickfall]

As usual, excellent job! To hide the solder, use a razor blade and shave of tiny amounts of the solder. Add it to the flux in the center of the badge. Place badge in correct position and clamp. Then add heat. The solder will melt and flow under the badge from the center outward. You don’t have to wick it from the side in to the center. This will prevent any solder affecting your perfect nickel plating. Cheers and keep up the good work.

[@xxcabookaxx]

Love this one in particular in how his personality changes dramatically

[@bababooie9420]

Imagine this person having grandkids. “Back in my day I used to fix up those ancient Zippo lighters.” “Those ancient *what?”*

[@someguy2297]

Dag nabbit dang kids now a day's using Dem arc lighters whatever happened to the classic lighters? - old man me

[@ZeeZedZee]

As an avid zippo fan, I never get tired of these restoration vids. Keep it up

[@NaluVila]

Me: "Need some sleep. So tired!" KZbin: "US lighter restoration." Me: "Oh, well..."

[@playboy_alv6347]

That’s me lmao

[@seantaggart7382]

Its midnight for me Oh the life of a night owl

[@xxifirestormxx56]

I toss my pain with my wishes in a wishing well

[@wolfhc7019]

I keep seeing this "Liquid Ice" and "Water", how about some good quality "Earth Spit"? That would really help ya clean :D

[@corison2058]

👏👏👏🤣 i love it!

[@joejoe2658]

river cum

[@kyusss]

Condensed steam

[@romanjustroman7445]

Wait, so it was water? I thought "liquid ice" is a nickname for some solution that doesn't freeze when the temperature is below zero so it can have the temperature of ice yet stay liquid. You know, like the "dry ice" thing which is actually frozen CO2 so it doesn't turn into water but is still called "ice".

[@raddishforthenight]

Roman, just Roman man me too but then it clicked its just water

[@ZaphkieI]

*Liquid Ice* My dumbass for 3 seconds: "Woah liquid ice that's cool." Also me: "Wait."

[@jbrown577]

Zippo logo is 1980-2011 series and VII date code says it's a 1991 series.

[@kjiibrit]

and the "C" makes it March.

[@nickmacey4480]

I was gonna say something about that lol

[@nitroxylictv]

Crazy how they have been making Zippo's the exact same since the 1930s. Some old designs stand the test of time.

[@lidet19]

The hammer scan made me laugh loudly 🙂

[@OddTinkering]

Great to hear!

[@joejoe2658]

you bugged his house?

[@xCellinax]

I like it without voice and music. Its so relaxing to hear the brushing...

[@CleanJean53]

...I was weirdly excited to see the return of "liquid ice"

[@infiniteboredom9642]

Me chaotic neutral dihydrogen monoxide

[@ceeezus]

her: it’s my first time, go easy. me: 5:15

[@TheDysentricDajjal]

I nutted to this

[@asm_spider-man1962]

Nice

[@definitelynotakaren_9168]

😂😂😂

[@Odysseus1999]

Lol

[@medic-iw6qx]

That lighter was manufactured in March 1991, so a little under 30 years old. Great find and a great job on the restoration !

[@unekstylz4018]

Please tell me where you got this info. I have the exact same lighter. My grandfather gave me as a gift when I was 13. Always wondered what the symbol was etc. don’t know how he got an American army zippo as we are Canadian.

[@FidelCashflow_YT]

​@@unekstylz4018The bottom of the lighter tells all. Just gotta search Zippos dating system and you'll find it. Course it's been a month, so maybe you already did.

[@kingnugget4050]

I like to believe that when he’s done he randomly just asks someone “hey you want a army lighter for free”

[@peterbaumgaertner6640]

2020: Zippo lighter restoration 2120: Rapture restoration (Bioshock)

[@shlimms]

Kenny Baumgaertner I was just playing that!

[@thetodol6144]

I never finish Bioshock

[@microsoftpowerpoint3039]

Todol_65 same lol

[@shlimms]

Todol_65 tbh I did give up like half an hour or less in

[@waddac2]

WOW!!!!!!!! That is an amazing video Brother. Loved it from beginning to end, great restoration my friend and very well done 👍👍👍👍👍👍

[@DeadPollo]

at the "liquid ice" my brain stopped working for 12 seconds. it needs some restoration as well

[@shanekneeshaw3483]

Water i had me thinking for ages haha

[@nicm2376]

one week ago - randomly recommended a video from this channel. one week later - subscribed and watched every single video on this channel. KZbin - tries to recommend me other restoration channel videos but I hit "Not Interested" cuz I'm a loyal Odd Tinkering stan now. what a week.

[@TheDankTiel]

6:03 Hmmm what is this advanced restoration elixir that looks like ketchup? Edit: its just ketchup and im mildly disappointed

[@marchills4131]

It's not ketchup any more that that clear liquid was water. It's hamburger moistener.

[@thezeshadow7782]

@@marchills4131 holy sht dont say that your gonna mess with my brain

[@alisona.4166]

Marc Hills Ketchup is a sports drink because of its sugar and electrolyte contents. If it was carbonated it would be a soda. Have fun thinking of carbonated ketchup.

[@thousand7480]

@@alisona.4166 oh no

[@ma.sherryp.tripole6370]

Odd Tinkering: revives a old US military match 1.2 Million people: *Interesting...*

[@garyjohnson6858]

its not a match and that cliche is invalid for this video

[@ma.sherryp.tripole6370]

@@garyjohnson6858 ok

[@garyjohnson6858]

@@ma.sherryp.tripole6370 yis

[@ma.sherryp.tripole6370]

@@garyjohnson6858 ok lol

[@ravenstrahd5234]

The fact you pulled the lighter out easily shows its in better shape than some of the others you worked on.

[@KatJustice97]

I like how you always show off the reflections of anything shiny you restore. Your little finger waggles look so overjoyed

[@joanns7007]

I inherited 2 zippo lighters and luckily they just needed some polishing on the outside cases. But now I see how to redo the inside! Thank you

[@miladicanimations7759]

Odd Tinkiering: *Liquid ice* Everyone: **Visible confusion**

[@Gary-Seven-and-Isis-in-1968]

I restored a few of these in my time and soldered emblems and coins to them. You applied the solder to the outside edge thus making a messy pool of solder there which would look even more obvious on a brass zippo. To overcome this, I made a tiny ring of multicore solder and clamped it under the emblem, applied heat from a blow torch and when the solder melts, the clamp pushes the emblem onto the surface of the case. Done!

[@Zippofanatic77outdoors]

So u restore these all the time and your not even call out the fact this entire video is fake hahaha. 90’s zippo are brass they don’t rust like this one when all the chrome comes off lol

[@Gary-Seven-and-Isis-in-1968]

@@Zippofanatic77outdoors You cannot solder to mild steel.. So you just displayed how STUPID you are.. The case is BRASS the inner, is mild steel.

[@Zippofanatic77outdoors]

@@Gary-Seven-and-Isis-in-1968 U think I don’t know inserts are steel moron !! Hahaha wow your dumb

[@Gary-Seven-and-Isis-in-1968]

@@Zippofanatic77outdoors Hey, Ass Wipe, only the inner was rusty so what are you commenting about. Did you know that Trolling is a mental illness?🤡👆

[@104d_3rr0r_vince]

Great! You could apply a blob of solder to the emblem first and later heat the body from inside.

[@TheBreadNose]

6:20 This man is either a maniac or a genius.

[@TImmY-tm4ro]

„Liquid ice“ Me: „Brain.exe stopped working“

[@seantaggart7382]

@Iraq Veteran 99 Yeah i hate doing cold restarts especially after a crash

[@jseden]

This i awesome! I have the Zippo my grandfather carried through WW2. It's a little more beat up, has his companies insignia welded to it but has basically zero rust and still works. Ill be keeping it just as it is.

[@PikoCases]

Amazing restoration my friend 🤗

[@WETVFirst]

Really👍👍👍.

[@lord-furface]

Found your channel a week ago, thanks to you I’m binge watching your videos when I need to sleep, love it, you have a nice concept here, no talking, just the sound of you working, and great humor. Keep up the great work.

[@MrBabyStokes]

*Man your editing, camera angles, and shots have really grown! Keep up the good work* 💙💚💙💚💙

[@ColinsMatas]

best restoration channel so far. The way you film and present the video is awesome.

[@FranktheTank319]

All these years and I never knew the hole in the felt pad was for an extra flint. I always used it as a fill hole because I was too lazy to lift the pad.

[@ManLikeSully]

"liquid Ice" Me: who are you, who are so wise in the ways of science

[@untitledkingdom5254]

13:44 “felt pad thingy.” On this channel, we use only the most professional terminology

[@-bunny-1139]

Ah yes

[@natalialima4823]

man this videos are the one thing that can make me survive quarentine

[@ATV100mph]

" Back in my days of the Army, we used to have to eat whatever was available. Somehow we always ended up with ketchup and lighters."

[@1satisfiedmind]

This cool, Im a non smoker who inherited a few zippos, which i use to light friend's cigarettes when Im at the bar. I have, in my hand right now, that exact lighter in excellent condition. I've just started learing about zippos, this was a fun watch.

[@GameBoyPlayz]

I love how there's no music, just the sounds of him working

[@plauze82]

No toothbrush was harmed during the making of this video.

[@josephinehogg3629]

4:30 - I looked at the "liquid ice" contained and wondered to myself - hum, wonder what's that made of? LOL DOH! LOL

[@motorsmotors9180]

www.amazon.com/dp/B00GLJAVUI/ref=dp_cerb_1

[@renatozorete8493]

*ASRM..WITH TICKLING SOUNDS!!!...GRACIAS CABALLERO.*

[@arandumendez9557]

6:20 I thougth that was lithium grease and you were going to make the ketchup joke again, turns out it was just ketchup.equal amounts of vinegar salt and flour make a good rust remover for copper alloys. Tried it myself with a old brass mortar and it worked perfectly, but it takes a couple days.

[@animeangel1983]

Yep, 1/3 cup of flour, 1/3 cup of salt, 1/3 cup of vinegar. Wrap it in saran wrap and leave it for like a day. When it's green, your brass is clean.

[@ajbrown2013]

Liked and shared on Facebook this is the first video I have watched in months that’s held my attention sir I hope you make more restorations now to sun and see what else you have very awesome video

[@DanielGilbert86]

Dear diary, today, I learned that you can put a spare flint into the felt thingy of a Zippo. I never ever noticed that before.

[@Xyradia]

Yup. My Dad used Zappos for years and I loved watching him hide the extra flint every time.

[@cwr56]

I once found about 2 or 3 dozen extra flints under the felt of a Zippo from eBay.

[@PadreMortalis]

Back when I smoked, I never used the little hole. But I always stuck 2 extra under the felt

[@blitz_f1222]

Wow, this is the kinda guy who as a kid known how to perfectly put the lego stickers

[@ayoub339]

Hi, I'm french and everyday, I watch some videos of restorations ... I love your videos...

[@geniusdrummer643]

Him: “liquid ice” Me: B R U H

[@Joesworldttv]

That is one beautiful lighter!

[@edgaraquino2324]

Beautiful work! Perhaps you might consider putting your restorations on rotation....they should be seen & appreciated....😊 Good job!

[@filipestefano2411]

Parabéns pelo trabalho incrível. Não me canso de ver vídeos como esse. Isso sim é conteúdo de verdade 👏🏻 Você vende seus objetos após a reforma ?

[@carl4508]

Estudos mostram que A cada 0 videos gringos tem um BR nos comentarios

[@WalterWhite0123]

After watching your zippo restoration videos it inspired me to restore one of my grandfather's old zippo's I inherited I have to say it came out pretty good for my first restoration

[@cambofixing]

good job

[@xati346]

Why does this comment have 4 likes it’s a verified person

[@xati346]

With 341k subs

[@conradclipper]

I had no idea THAT is what the little hole in the pad is for!! Like most morons, I always squirted the lighter fluid through the hole (ignoring the obvious instructions) and promptly set fire to my hand and the entire casing. This is why you have a wonderful KZbin channel and I have a badly burned hand.

[@blackphlxyd]

That realy nice, love u

[@roska6009]

I just have to praise you! Your attention to detail gives me great satisfaction and oh those editing skills! 😍 You do amazing restorations with respect for the original design but without ability to make it into interesting video it wouldn't be even half as enjoyable to watch. You're doing great, thank you! 😊 Samma på finska: Tosi kiva, tykkään!

[@caina8752]

0:00 of video: Me: aaahhn... a 1993 lighter? End of video: Me:did he buy that lighter yesterday? looks so new

[@nguoivietphilly1252]

PigHunt I am new , please help me to subscribe me , thanks .

[@ghibbus]

Thats One of the most satisfying videos i've ever seen

[@df8238]

I like how you take your time to show the final product, most people don’t do that

[@austinpowerzz2678]

“Liquid Ice” Beautiful

[@elvenstar207]

When you were showing how reflective the end result was, I was half expecting you to have put the mirror image of some text saying 'subscribe' lol. Love the video as always! :)

[@williamcobb6322]

Excellent video! Love the way you brought this lighter back to life

[@muzzaball]

Excellent resto, bringing a great one back from the brink - your country thanks you!

[@Do_you_know_who_i_am1]

This person really is good at restoring things

[@sanjaysatav]

Excellent craftsmanship, Passion and ease..

[@GeekInfinityMedia]

Glad to see Heisenberg started a channel.

[@blackraven615]

You are so cool! I've been putting your videos to play in the background as I work and I just keep getting distracted by them instead. Love how soothing all the sounds are. Makes me wanna be more handy.

[@o_o888]

Remover of rust sounds like some mortal Kombat fatality that triborg would use

[@MeMaex]

"Liquid Ice" I was thinking that this is some sort of dangerous chemical Stuff and then it struck me like lightning. I am stupid.

[@superfly9291]

That's what the hole in the "felt pad thingy" is for!? That's why it never worked as a fuel port I guess. Thanks for another great video!

[@georgeshelton6281]

This has me thinking back to the time when President Truman had the U.S. Army Air Corps has become 2 separate military service branches. One is the U.S. Army and the other is the U.S. Air Force. That was back in 1946. 💜

[@memeAlexcheramie]

These videos cure my depression