I used one as a London courier tool in the early 90s I did end up changing the layout to a C with the higher wider bars made all the difference
@GWAYGWAY111 ай бұрын
They do get hot and boil your ball in summer, the R/S was the worse of them , mine is a plain bike and better with heat, I did some baffling under the tank a put some insulation to keep the heat from boiling the fuel causing vaporisation and it comes to a halt until you open the tank cap letting out the gasses. The clocks have little vent and it needs enlarging. I am little and have short little legs I shortened the rear spring but that makes it more trouble getting in the stand. You never mentioned the SMOKING when started off the side stand, it clear in a mile but it has always done it since the very first time new, when I bought it in 1984. The oil goes down the guides into the pipes and burns in there. Batteries come to a sudden death and I have been stranded by them. It appears the heat coming past it from the engine is the cause.
@roverchap3 жыл бұрын
I recently bought an '84 model and have already put 1500 miles on it. Just found your channel so I'll have a watch of your restoration vdeos. Looks like you're in the Manchester area like me. I agree with your summary of the K100RS bad points except for the brakes which I think are well up to stopping the bike from speed, very reassuring. The front discs tend to warp though and are expensive to replace. I previously had a K75S which has a smoother engine and uses less fuel. You've got the lowered seat which may be the reason that the footpegs feel high. The standard seat is about 5 cms higher. I love the K100's muscular power and presence on fast roads, and the innovative '80s design. Check out the Sinclair C5 and the British Rail Advanced Passenger Train which were contemporaries, for the styling cues. It is surprising that the K100RS hasn't become a collectible classic when you consider its place in the history of motorcycle development, and of BMW in particular. BMW's just weren't cool back in the 70s and 80s when the demographic of UK bikers was a lot younger, so I guess most people who bought one new are now either dead or too old to ride.
@user-sf9yc2kj9c10 ай бұрын
Agree
@Jonathan_Doe_3 жыл бұрын
If you’re not feeling up to the LED conversion, maybe find somewhere to stick a couple of silica gel packets in the gauges?
@metodyx75073 жыл бұрын
i agree with the problem due to the heat emitted by the engine and hitting the knees unless you live in an environment like me. 2 months a year warm remained cold, Following the dew of the tachograph (depending on the age of the engine), I assume that a thin rubber seal prepared..you can solve the problem for little money, in terms of uncomfortable sitting position, I am 58 years old drove 1274 km in one day (Romania-Transfagarasan, all Hungary and part of Slovenia) with my girl friend on the back seat?! ;)) I agree with the brakes on the old model, especially if they are not the original Brembo plates ...
@juansanz92073 жыл бұрын
I ride exactly the same bike as yours (same color aswell) and agree with you on every flaw you mentioned. I would also add the annoying vibrations on the pegs at mid revs... Rear brake was a little wimpy even in the 80´s... Enjoyed the vid!
@responderman9 ай бұрын
thank you for the video, i agree with your report especially the heat. i run the K75RT and i actually stripped off the faring and enjoy it so much more. it was either sell it or change it. ride safe.
@connorBMXryan3 жыл бұрын
Great videos pal, watching the NC500 now, it's Connor from the cafe, hope to see you again soon! I'm at snakes pass again tomorrow with a friend. Enjoy your trip!
@MAPPED3 жыл бұрын
Morning buddy! Thanks for watching the vids! Really enjoyed chatting yesterday...you will be mentioned in this tour series (MAPPED Coast2Coast)...hope you and your mate enjoy Snake Pass! Its great both ways, but I normally start it from Glossop straight through to Derwent Valley! Ride safe!!
@futurepath Жыл бұрын
Jump to 4:12 for the 1st point
@thealchemist90256 күн бұрын
What phone mount are you using? Does it get too hot in the sun? Does it shut down due to heat.
@RonSchaefer-gd3um10 ай бұрын
I have completely resolved the heat issues with a self adhesive heat blanket from a 'speed shop' and spent the day cutting and installing, also insulated the fule rail and return with pipe insulation from the hardware store, long ride today with 0 heat issue
@vulcanbcn6 ай бұрын
Can you send some pictures or document what you've done so far? thanks
@RonSchaefer-gd3um6 ай бұрын
Hi, the work to resolve the heat issue ispretty easy, remove the right side lower faring and completly cover the area with the self adheasive heat insulation, i cut cardboard templates beingcareful to not block the air flow and fan for the raidator, covered the front of the airbox and the bottom of the gas tank and frame, so no heat can transfere to the tank, under the right side lower fainring I put the pipe insulation on thefule return line (it runs up besides the raidator) used some small zip ties to secure it, and did the fule rail to by cutting some notches where the ingectors are and also did the bottom of the black filler between the the left side of the gas tank and the upper faring@@vulcanbcn
@videotosse Жыл бұрын
Could you please state your height and stature? It could be different for people of a different built.
@curtrn Жыл бұрын
I love the brakes. My brother purchase a much newer BMW. The electronics on the new bike along with the raw power is scary but the braking on the new bikes is just terrifying. The modern bikes actually are a common cause of accidents, they stop too quickly. I am 55 and am accustom to older motor designs in every way. I would probably kill myself of these modern bikes. Great review but I see nothing but love for these bikes. If I were to state one and I'm use to it now but at first the blinkers and reset switches were troubling I was hitting the horn for the first week or two.
@paullee66634 жыл бұрын
Strange marketing strategy :-) I wonder if all the TFT screens, electronic suspensions, electronic aids etc will still be working in 35 years time? Rev counter on my old Honda has always suffered from condensation too, Oddly usually 'clears' after a couple of hours (again a known problem on the model - "They all do that Sir!" :-)
@grabir013 жыл бұрын
ok.. Here is a fix for the moisture getting inside the cluster. Find the lowest point of the plastic and drill a tiny hole. This will allow it to vent and dry out. Being that it will be at the lowest point, any moisture that does get in will drain out and also dry. As for the brakes.. Get EBC - FA18HH and that bike will stop on a dime and give you change!!! Engine heat.. I have nothing for that.. Sorry.. Pegs either.. :(
@davidwaddington94144 жыл бұрын
are Toby and the boys doing any rides and videos ?
@masseyfergy683 жыл бұрын
It ain't no FLAT4 that would be a VW beetle its a Peugeot 104 on its side.......
@disznajbros9791 Жыл бұрын
My problem is that it took you 4 whole minutes to start saying the thing the video is actually about. And also you start saying like "number four", but than we wait another 20 seconds til you actually say it. Just innecesserily long. But great video though, and I was curious about it
@HungryWelder9 ай бұрын
If you’re always looking for something to bitch about, you’ll always find it 🥰
@disznajbros97919 ай бұрын
@@HungryWelder Why, this doesn't brother you?
@HungryWelder9 ай бұрын
@@disznajbros9791 Not enough to complain. Just skip to the part of the video you’re looking for man lol
@disznajbros97919 ай бұрын
@@HungryWelder but in advance I don't know when he starts. If I knew, no problem, I skip it. But I don't. So lets agree that different things annoy us. 🥰
@braikka2 жыл бұрын
I don't remember my clocks having a problem with condensation?
@46MOTO462 жыл бұрын
ЛАЙК
@martialme8411 ай бұрын
No, please don't "que intro" because intros are shit. Always. Intros are always inferior to the actual content. Just get to the content that the title advertises, if you don't mind.
@ReptileRaptureRR10 ай бұрын
Intro too long. Off tangent conversation in the beginning should be edited out.
@mr.superwetter41933 жыл бұрын
The problem is not the K100RS, but the user!
@Bruno-my9uf3 жыл бұрын
Buy another bike . like a gs 1200. . that is an old classic . collector . nice bike
@kirand483 Жыл бұрын
Describing the engine as a flat four isn't right. It's an inline four which has been laid on it's side.
@ianbonnick76403 ай бұрын
I used one as a London courier tool in the early 90s I did end up changing the layout to a C with the higher wider bars made all the difference