ZONTES G125 150 LOWERING RIDE HEIGHT OR JUST LOWER THE FRONT FORKS 2 CM

Help Support my efforts please paypal.me/mick....
Become a member / michaelphillips1959
FACEBOOK / michael.phillips.52459615
APPLICABLE TO ALL ZONTES 125 150 MODELS YOU CAN LOWER THE RIDE HEIGHT BY 2 CM AT FRONT FORKS MORE STABLE RIDE BETTER FEEDBACK FROM BRAKING AT HIGHER SPEED
------------------------------------
#zontes,#G125,#guide

[@garrykelly]

Thanks for sharing. I'll probably need to do this on the Zontes 125-U

[@michaelphillips1959]

Ok lad be careful 🙂

[@mrmustafaali3416]

Thank you so much Philip

[@michaelphillips1959]

No problem 👍

[@Hillbilly333]

That was exciting no idea what they did

[@michaelphillips1959]

Hi James 😁 they were changing the shock absorber to a lower one and a shorter side stand which lowers the ride height c

[@steve00alt70]

Can you do a video for zontes zt 125 u. To lower the rear spring for short riders?

[@godteam9539]

Is it possible for Zontes T350X?

[@julio2918]

What are the dimensions of the new shock absorber? and where can you get it? thanks.

[@michaelphillips1959]

Sorry not sure of the dimensions will have s look tomorrow, will put a link in tomorrow to zontes page, where it will have the catalogue order number in the page do then you ask your zontes dealer to order it for you cheers mad mick

[@michaelphillips1959]

Have you tried softening the spring load with the c spanner that will lower the ride height when you sitting on bike and won't interfere with the riding quality

[@michaelphillips1959]

HI I WOULD STILL ADVISE SOFTENING THE REAR SHOCK LOAD BY ADJUSTING THE LOWER COLLAR, on the bottom of the shock AS THIS WILL GIVE SAME DESIRED AFFECT WHEN YOU SIT ON THE BIKE,YET THE WEB ADDRESS FOR THE ORDER CODES IS HERE,(ooops cap lock on sorry) www.kiden.cn/EN/Products/Part9Bom.aspx?Cid=FB35DE171DCF52DD&GZid=19CB0F6 it shows a new brake pipe and side stand which you may need as well...... so i would suggest try above first as this will lower the ride height for free.........

[@julio2918]

@@michaelphillips1959 thanks

[@ralphganaden7390]

@@michaelphillips1959 Hi do you know if this works? Want to lower a G1

[@jamilahmedpalash7980]

How much this full set cost ??? I need to lower my seat height 😔

[@michaelphillips1959]

Have a chat to your zontes dealer , the shock for the 310cc is around £140 but not sure price for 125 155 cc

[@amazingnetwork9599]

Hellooo I’m from Malaysia I’m use Zt155g and I wan to know can or not we change ecu racing to this bike and what ecu can use to this bike

[@michaelphillips1959]

Sorry not sure as it's something I don't go into

[@brotherpaul1911]

Greetings Michael. Do you happen to know the difference of the suspension on the g1(125-155)/310 series and the new 350 series rear shock absorber? Is it different in height or a redesigned suspension system ? I checked a Hagon suspension that fits the 310 T/X2 and the g125/155 since they share the rear shock system, and was wondering whether they kept the t2 suspension on the 350 series models or they upgraded to a new one. Thanks in advance, Paul

[@michaelphillips1959]

Paul sorry at work at moment will check the part numbers later ta

[@michaelphillips1959]

hi the part numbers are different look at the parts for the items from zontes below t310 is www.zontes.com/en/Products/Part9Bom.aspx?Cid=BD90E3FB6B0D48A6&Pid=503CB0EEC17CFD7B t350 is www.zontes.com/en/Products/Part9Bom.aspx?Cid=C2A345052EA940AE&Pid=3C82950F782F6691

[@danforbes4513]

its 800mm ?????????

[@p.santos6694]

Can you make it higher instead ?

[@michaelphillips1959]

Don't know sorry, just as lowering for us short leg folk

[@peterwer3080]

Hi Michael, can i lower only the front forks? Need i in this case a new side stand?

[@michaelphillips1959]

Hi lowering the front forks will alter the bikes dynamics in cornering, braking etc, not advisable and won't alter the seat height ta

[@michaelphillips1959]

You can buy a 770mm side stand from AliExpress the normal side stand is 800mm but you could measure yours to check

[@peterwer3080]

@@michaelphillips1959 👍 thank you

[@danforbes4513]

no legs?