Zoom Hydraulic Brakes HB875 Real Time Review

[@Andy-Sas]

As always the absolute best real time review ! Crashed with bend bars and everything. Totally awesomeness wolftick video .

[@WOLFTICKVIDEOS]

HA HA o'll Andy, thanks man sucks about the bars but ill get over it! LOL Peace brother and be safe my friend.

[@GoldenGod27]

Shimano XT style brake pads will fit, replaced the pads on mine and they worked perfect.

[@WOLFTICKVIDEOS]

Cool! Thank you so much, I was getting nervous ha ha I should be covered then lol. Appreciate it man

[@raymundguillertababan2014]

Thanks for the idea

[@PewarungRider]

Xt brake pads j02a?

[@bryanpd6882]

@@PewarungRider , probably AO1S pads

[@kaycee4765]

Hey. Living here in Philippines and decided to go back on biking. And it really shocked me by the price of shimano sets right now and its not always available here. So its kinda lit that you review this kind of brands. And by accident i got this zoom breaks and it really make an awesome job. I can recommend this to those who are not much hard core on monstrous trails.

[@WOLFTICKVIDEOS]

For sure man! That's awesome you found us and mountain biking again lol. Thank you! Good luck

[@kaycee4765]

@@WOLFTICKVIDEOS you got a new subcriber here. More power!

[@WOLFTICKVIDEOS]

Thank you so much!! Welcome to the #WOLFTICKNATION Vin!! LOL hope to see you for tomorrows Christmas video! Gonna be golden:) Thanks again man Mamaya tao !!! Kapayapaan

[@kaycee4765]

@@WOLFTICKVIDEOS ill be waiting on that!

[@KaerufromYT]

Mapagsamantala mga pilipino sa prices ngayon sa mga bike noh? 😅

[@johnnydoe66]

May be brake fade from heat build up. One cause is the small rotors getting hot and not cooling fast enough, plus the fluid gets hot causing a "mushy" feel.

[@WOLFTICKVIDEOS]

Well John sounds like you NAILEDit ha ha, didnt think about that but man I believe with some better rotors and these brakes may be very diamond in the rough:)

[@mtbboy1993]

@@WOLFTICKVIDEOS have you checked the rotors? As John mentioned, overheating can do this, so check the rotors and brakes, if they are hot, it's clearly overheating, and floating rotors make a difference, so do bugger rotors, but a con of floating rotors is that after years of use the rivets creak. If you get anew rotors go for many small venting holes, no big holes, you should have more braking surface, more venting holes thus better cooling and bite. So far the brake rotors that has this done to the limit is Brake-stuff, even smaller and more holes than my hope rotors, they don't do floating rotors, but many small holes. I know Hope rotors perform well, cus I have them, but I am sure Brake Stuff rotors will perform well too

[@chadlafrennie4065]

I put those brakes on my hyper explorer build a couple months ago and they have been flawless.the stopping power is insane compared to the mechanical discs they replace. My only complaint is that the levers are a little on the loosey goosey side and rattle slot when you are on bumpy terrain without your fingers on them.

[@WOLFTICKVIDEOS]

Hmmmm....I havent noticed yet but we will see after some time of riding and getting them broken in man. Thanks for sharing and yes they are tons better than the stock cable bakes and way cooler!!!:) Appreciate you CHAD

[@bob-o9865]

Did your zoom brakes go on the non-traditional way, like front brake is on the right lever and rear brake left lever?

[@ryanscott1989]

6 months later and the price is up $20. Still better then the mt200 for $179. I paid $63 for the zoom last week and now they are up to $68.

[@WOLFTICKVIDEOS]

Way better for the price I agree. We have been lucky and stole some for around $54!! But the Zooms on the Taff have been giving us some issues and may take a look at installing some cheaper alternatives.

[@colomacountry]

They are 120 now for the ebike version

[@jcomm120]

Being able to talk & ride like that: super skills

[@WOLFTICKVIDEOS]

Well thank you so much J! It is difficult and you had better have some good cardio!!LOL Thanks for the compliment, then I CRASHED!! HA HA

[@jB_15]

@@WOLFTICKVIDEOS think you crashed because you were talking and wasn't focused. You should be able to pull that off normally. Good realtime review while riding for the rest of us!

[@WOLFTICKVIDEOS]

Man thank you very much that is very nice:) LOL The understanding of doing two things at once especially riding and explaining can be very difficult and it feels good to have someone appreciate it. Thank You:)

[@jB_15]

@@WOLFTICKVIDEOS hehehe I fully comprehend the difficulty and you managed to pull it off for so long! I'd run out of breath and content to say then crash and the first few turns myself LOL!

[@WOLFTICKVIDEOS]

🤣🤣😂 Priceless! Just make sure to hit that record button first brother!!

[@leonline3424]

Nice video and thanks for sharing, i bought these a couple of days ago and i've only tried them so far around the garden, but to be honest i'm quite impressed. They did arrive with the levers inverted, in Europe we use the front brake on the left and viceversa the back on the right but i didn't swap them, i can live with that! I've found out that they use SHIMANO A01s brake pads. It's good you actually review and try out these sort of products, not everybody can afford the boutique stuff!

[@WOLFTICKVIDEOS]

Well thats AWESOME you can understand our channel!!! Feels good man, now the zooms are pretty good and really hell of a deal man, glad you got some! Just did the bleed video you may wanna check that out lol. Thanks for the recommendation on the pads and the comment brother!! See you TUESDAY!! Thanks for being a public SUBBER:)

[@svengaard3117]

As a diesel mechanic we deal with entrained air in fuel as an issue, I have had the same brake issue described and found entrained air in low end fluid the culprit, similar feel. Not confidence inspiring.

[@WOLFTICKVIDEOS]

Gotcha man, they kind of have a sponginess to them after a long ride. Then after they sit they seem to kinda come back

[@HatefullKilla]

Wish I could get a look at the orientation on the bars. I just got a set and I'm pretty sure the front brake orientation is backwards

[@HatefullKilla]

Ahh, you said exactly my problem at the end. That sucks. Means I need a bleeder kit

[@WOLFTICKVIDEOS]

Yes....If you watched the zoom install video we go over it:( We swapped them man, they do not come the correct usa way. But you can watch the video, and you can see also in another how we bleed them.

[@HatefullKilla]

@@WOLFTICKVIDEOS I flipped the upside down to test fit. Then ran into the problem of needing an adapter for the 180mm front rotor..... 🤣 I swear, just when I think I got everything I need...

[@WOLFTICKVIDEOS]

HA HA HA been there!!! Try ordering stuff to complete a video realtime:) Good luck man!!

[@WOLFTICKVIDEOS]

yep:(

[@mtbboy1993]

8:08 the brake pads are probably are the old Shimano style pads, it's easy to get them, but not as common brake pads as the basic shape. pads this shape: Shimano A01S: Resin pads: www.bike24.com/p23012.html Metallic pads: www.bike24.com/p25472.html compatible brakes: XTR BR-M975 XTR BR-M965 XTR BR-M966 XTR BR-M775 XT BR-M765 SAINT BR-M800 HONE BR-M601 SLX BR-M665 LX BR-M585 Deore BR-M535

[@WOLFTICKVIDEOS]

Hey thanks Johannes, will do man and we will look;)

[@codydoerzbacher7864]

"I'm going pretty fast right now, WOO!" It was in this moment the Tick new he had F***'d up.

[@WOLFTICKVIDEOS]

LMFAO!!!!😂😂😂😂Dude you nailed it! My thoughts exactly ha ha ha ha sounds lke you need to be my narrator:)

[@Andy-Sas]

Lol loolll

[@codydoerzbacher7864]

@@WOLFTICKVIDEOS haha love it man. Keep safe out there!

[@coldstne1]

Thank you for sharing this vid! I’m impressed by these brakes just on your review alone! I’m glad you didn’t mess yourself up on the wipeout, that’s happened to me as well. Most of my bikes have hope brakes on them and I’m really looking forward to trying these budget brakes on my next build. Franco

[@WOLFTICKVIDEOS]

So glad you found it helpful:) Thanks man and they are not bad at all, let us know how your next build goes!

[@jjmontilla1334]

Thank you so much for reviewing this product. I’ll be getting my zoom brakes next week.👌🏻 subscriber here!!!!!!!!!!

[@WOLFTICKVIDEOS]

Thank you so much JJ! Thats awesome man and please remember the zoom brakes we got were routed backwards, left brake for rear and right brake for front. I dont know if you watched the initial review video but we explained it there. We switched them and they work nice, one guy says he runs them upside down and they work like a charm!! Read that fine print just to be sure;) Thank you for subscribing and hope they do you proud brother!! LATER

[@sadraccastillo3521]

@@WOLFTICKVIDEOS uuuu

[@mtbboy1993]

8:22 the issue you are describing can be caused by leaking seals, so air gets in the system, might be tiny fluid leak or no fluid leak, but a lot of air in system for sure, which gets moved to thee top when you are on and off and on and off as you say, but then you ride and thee bubbles move in the system, and and the brake gets spongy.

[@WOLFTICKVIDEOS]

Need to do a once over and check, you are right with the spongy feeling, hope its just some trapped air? :)

[@euryreyes5660]

You can bleed that in the red cover its located in the lever

[@WOLFTICKVIDEOS]

👍 Thanks man:)

[@MarkClimbs]

Hell yeah! Right as I wake up

[@WOLFTICKVIDEOS]

Hope you enjoy 😂🚵‍♂️

[@allenncrystalking8517]

So appreciate y'alls reviews.

[@WOLFTICKVIDEOS]

Thank you man, appreciate the comments and the views! Oh and also being a public SUBBER!

[@zulufoxphoto3822]

Happy to support a great channel!

[@WOLFTICKVIDEOS]

Thanks again man, and your piece of mail came in!!! Have not yet opened it, will do so on the next Tuesday vid!!!

[@NonLegitNation2]

Revisiting this video to say that yesterday i got rid of my Zoom hydraulic brakes and went with Shimano MT200s, and to be honest I'm not impressed with the shimanos, I liked the lever design better on the zooms, plus these MT200s are pretty spongy, even after bleeding them. In terms of stopping power I haven't notice any improvement with the MT200s, to me it feels the same as the Zoom brakes. I kind of wish I had stayed with the Zoom brakes, but I am changing the color scheme on my GT Aggressor Pro to all black and the red Zoom brakes didn't look right with everything else being black. I guess it's a good thing I only paid $80.00 total on the back and fronts from my LBS, I know a certain seller on Amazon sells them at a premium for $120.00 which is ridiculous.

[@WOLFTICKVIDEOS]

Very ridiculous price man, what about trying the merocas? We are going to film a video with all budget bikes vs each other. But very interesting to know you feel the zooms are better...

[@purplegarage05]

Actually before covid made prices skyrocket shimano mt200 were 40$

[@WOLFTICKVIDEOS]

Dude I cant believe that!!! Crazy

[@purplegarage05]

@@WOLFTICKVIDEOS yeah man they were pretty much the best at that price point the zoom braked used to be even cheaper

[@WOLFTICKVIDEOS]

Damn I couldent imagine!! Thats really cheap for the MT200's:)

[@purplegarage05]

@@WOLFTICKVIDEOS yeah prices really do suck that bad rn

[@WOLFTICKVIDEOS]

😤😤😤

[@anandedgar7753]

What oil did you use fir zoom hydraulic brakes

[@WOLFTICKVIDEOS]

rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F223399543156&campid=5338684594&toolid=10001&customid=Tektro Brake Fluid

[@spacegaming7015]

Disassemble it and then fix the O-ring position then it should work

[@WOLFTICKVIDEOS]

May take a look:) Thanks

[@reeeeeem69420]

You need adapters for the bleed port, they come with most bleeding kits. The ones I have even need different adapters which is a pain in the ass. They feel like a Shimano MT-200 with a better (I like the clamp and alloy lever) and worse build quality all at the same time. They are routed for European users, apparently.

[@WOLFTICKVIDEOS]

HA HA apparently is right:) Thanks for looking out man and we actually have a bleed video of them and KIT! LOL Later brother and appreciate you watching

[@TrailFReEK]

I have some Zooms on my Chinese Carbon xc bike. The front worked awesome.but couldn't get the rear to bleed right and never had any power.

[@WOLFTICKVIDEOS]

Ok thats good to know, after the new hoses and bleed I figured I would have the same problem early but man I have bled twice and still a bit spongy in the rear, thanks for letting me know man, I hope to get her figured out before the next ride:)

[@prinzbeltran3843]

Also Bought this Brakeset but I can't use my bike broken cranks but I can say it feels great.

[@WOLFTICKVIDEOS]

Man hope you get your crankset going man so you can really get those brakes broke in!LOL

[@Zoomer360]

Zoom HB 875 Very good brakes

[@WOLFTICKVIDEOS]

Not bad at all man, we are happy with them.

[@Zoomer360]

@@WOLFTICKVIDEOS i have this brakes. You can buy other chinese brakes - Racework XT-S. This version with IceTech pads. Cost 45$

[@Pay2winps]

Can you adjust the levers on these brakes to bring the levers closer to bars

[@WOLFTICKVIDEOS]

Hey man sorry not to of mentioned it but yes you can, right behind the lever there is a limit screw with plenty of room for adjustment.

[@Pay2winps]

Thanks for the reply love the videos great content very honest your loved in Manchester uk guys keep it going I’ve just ordered some of these brakes

[@WOLFTICKVIDEOS]

WELL WELL we are just chuffed to bits!!! Glad you like us and thanks for being a public subber man, very cool. Good luck on the brakes and be sure to tell your LADS:)

[@mtbboy1993]

Nice riding, you rode well, and smooth until the crash. do you know why you went sideways?

[@WOLFTICKVIDEOS]

I think not knowing the bike fully? But really I believe it was because I was completely cold Man, just got there and had limited time. Should of gone earlier so I could of gotten in a simpler ride.

[@wulfraedofivanhoe8870]

Do they come with resin pads ?

[@WOLFTICKVIDEOS]

Yes...

[@peterramirez2746]

Shimano once used those for most deore and higher grade brakes you can get ceramic, metallic, resin, copper, aluminum back metallic pads try using shimano or magura mineral oil if that doesn't work get plane mineral oil or even baby oil

[@WOLFTICKVIDEOS]

Hmmm...that's interesting man. I would love to get some really good pads!!

[@shaun5206]

I have extra long 3G linkage springer triple tree forks so i ordered just the rear zoom hydraulic brake set up and put it on the front of my bike i was just wondering if the front and back calipers are the same ?

[@WOLFTICKVIDEOS]

Yes sir, they are the exact same:)

[@calebedens3740]

Dude, that was a nice crash! Ouch! Glad you're ok.

[@WOLFTICKVIDEOS]

LOL Just glad it was all on CAMERA!! Thanks man:)

[@199724]

Everyone always wants to get the cheapest from China. Which Chinese brand hydraulic disc brakes do you recommend that can compete with modern XT-XTR brakes?

[@WOLFTICKVIDEOS]

Man I don't think there is one......

[@MTBAlex]

I have TEKTRO HD-M745 4 PISTON on my Polygon Siskiu T8, it came stock with them, they work awesome. I would love to get some of the ones you have for my forgotten Mongoose Blackcomb 26, but I don't like the fact that they need to be modified

[@WOLFTICKVIDEOS]

Makes it a turnoff when it comes to buying them but right now for the price of $43 its hard to beat:)

[@MTBAlex]

@@WOLFTICKVIDEOS yeah

[@golden7983]

Nice video! i suscribed, they have enough strength to do a stoppie or a drift?

[@WOLFTICKVIDEOS]

Hey thanks man! We upgraded the rotors and blead the brakes and now it will drift but not sure on the stoppie. Check these out:kzbin.info/www/bejne/mHiWlGtuqqp-rcUkzbin.info/www/bejne/pZ7LgZVpYrikjsk

[@fdaushjazi]

what type of oil needle that this brake use?can someone tell me?

[@WOLFTICKVIDEOS]

Sure, sorry for the late reply, they use mineral oil:) Here is an affiliate link man amzn.to/31nQFLH

[@thezelona1]

What brand are the gears?

[@WOLFTICKVIDEOS]

Hwy Ana, when we ran this configuration I wanna say it was the Sunrace Grouoset

[@Dawginme1999]

Do they need to be bled once you get themv

[@WOLFTICKVIDEOS]

Well, we try to test them first without bleeding, but these have had to be bled several times. We have had a tough time with these for sure. I would only get the Zoom brakes if you can get them cheap and you don't mind working on them.

[@tork62077]

Another great video. Hope your ok from that crash.

[@WOLFTICKVIDEOS]

LOL Im all good and healing up man, just a little wake me up!! Thanks man:)

[@seanlopez7254]

May i ask its dual piston or not?

[@WOLFTICKVIDEOS]

Dual pistons with two pots

[@billsomerset238]

The link you have for the brakes doesn't work

[@WOLFTICKVIDEOS]

Thanks man! I think we fixed it. Can you please give it a try and let us know if it is working?

[@billsomerset238]

@@WOLFTICKVIDEOS yep, works now

[@WOLFTICKVIDEOS]

@@billsomerset238 Thanks again man!🙏

[@foggy561]

Came here to check out some cheap brakes and found a fellow member of the cauliflower crew. I see you 👀

[@WOLFTICKVIDEOS]

😉😉🤣 well thanks brother us cauliflower boys gotta stay together!! LOL Appreciate the support! All no gi jiu jitsu and wrestling 🥦🇧🇷

[@foggy561]

@@WOLFTICKVIDEOS that's why that fall barely fazed you 🤣. I know wrestling and judo have saved me from some big crashes. In judo you must learn how to fall before you learn to throw lol

[@mariopejovic]

good to see you safe after that crash man. good thing you're wearing your full face helmet, just to be sure. as for the brakes, not sure will I dare to use something I need to constantly pump to be sure they work. stay safe bro

[@WOLFTICKVIDEOS]

Ha HA you make them sound dangerous! They are like an air mattress, you get comfy and BAM you got to pump it up again LOL. But glad I am safe as well man, thanks Mario

[@timvansteenburgh8389]

Well I'm relieved now after telling you how great they worked for me i realized you have mountains where you live im in Texas so kinda flat and i must have the right amount of air in mine after talking to you and actually finding the bleed screw I think I'm going to leave alone main thing I liked about them is I didn't end up with the on off feel

[@WOLFTICKVIDEOS]

Hey Tim glad you dont have the same problem, funny with the "mountains" comment ha ha appreciate you man😉

[@JoshuaRust]

I would like to see an update after a proper bleed and new pad if you go that route. Also, what drivetrain are you using on your taff after the ltwoo chain bit the dust?

[@WOLFTICKVIDEOS]

Well that was filmed with the LTWOO, got another groupset we will let everyone know about:)

[@lonewolf30531]

Thanks for content . Some riding tips . Shoes 5-ten they make a huge difference . Also from my experience volleyball knee pads have worked out for me the best . The knee pads you are currently wearing are not bad but their elbow pads work better. Tires get some Maxxis wide trail DHR DHF front and rear a Maxxis Dissector or a Wide trail Maxxis recon .

[@WOLFTICKVIDEOS]

Right on man, shoes need to look into those for sure, everyone has been on my butt telling me about them but dude they are EXPENSIVE!!

[@purplegarage05]

@@WOLFTICKVIDEOS I wear vans sk8 highs they work well, heard DC skate shoes do too

[@WOLFTICKVIDEOS]

@Budget_MTB Funny looking at some skate shoes now:)

[@purplegarage05]

@@WOLFTICKVIDEOS sometimes 510s go on sale for 50% off so if you can grab a pair on that I would

[@allenncrystalking8517]

Also your links for eBay aren't working

[@WOLFTICKVIDEOS]

Thanks man! Try it again please and let us know.

[@allenncrystalking8517]

@@WOLFTICKVIDEOS They are working now thank you

[@WOLFTICKVIDEOS]

@@allenncrystalking8517 Hey man, thank you for catching that and letting us know.🙏

[@allenncrystalking8517]

@@WOLFTICKVIDEOS no problem bruh. Love the channel. Its kinda what I want to do with my channel but add som car repair and maintenance in. So I'm stealing ques and tips from y'all. Glad I can help.

[@WOLFTICKVIDEOS]

@@allenncrystalking8517 Ha ha well they say "imitation is the sincerest form of flattery", right?😉 Let us know when you start posting videos and we will check them out. Remember though, this KZbin thing if done right, is a grind from hell! Thanks for the support man👍🙏.

[@anandedgar7753]

My zoom hydraulic brake is not sharp as before, what you think is the problem

[@WOLFTICKVIDEOS]

Either you need to bleed and or change pads. That's what I would do.

[@anandedgar7753]

@@WOLFTICKVIDEOS thanks bro

[@anandedgar7753]

What brakes pad you use bro, send a link please

[@anandedgar7753]

@@WOLFTICKVIDEOS make a video of you bleeding the zoom brakes bro please, I need help to bleed mine

[@WOLFTICKVIDEOS]

Havent had to change them yet like I say on the video but, they are weird and this is what they look like and what I plan on ordering myself. rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FDisc-Brake-Pads-Replace-For-Shimano-M765-M975-M966-M965-Deore-XT-XTR-SLX%2F184501558578%3F_trkparms%3Dispr%253D1%26hash%3Ditem2af5265d32%3Ag%3AsAcAAOSwEK5fkzPs%26amdata%3Denc%253AAQAFAAACcBaobrjLl8XobRIiIML1V4Imu%25252Fn%25252BzU5L90Z278x5ickk8Fd9si%25252FIbtWQr%25252BhnlRwjDQSySuIY0g6mIHpUEXx4GC4sMUlgv5B3HR6T4yZP3MLRaGong%25252BHgJ%25252FbBMbEkZkVZ6U3KoaAVimmutakwPnjakTUw94UJUmsx2L%25252BRDmsMRZNMPvApJSUZ708lhnW5OIG7COvXqFcRhLEvK70jNuWQENvWv1s44CgHSl%25252BH2AVlAjkFGkllvd0lm7s%25252F2cuBz%25252F58ISn9osV%25252BB6BpWqYNzm5uXt1GQNUGoRGhtQIujT%25252FMHJE5B21utABqj6EJD7EYrgk6CHsRfiOguMpm0Lx3Tbz%25252BSqa8d%25252FJyWu7Fh8rlHO5i4QKHq%25252F7qIgIFux%25252ByrBqd9gYeBbPoccEqq6P24tlhKScrdd4CC8XFAWL5sUN5ZMtHu04Snwf8vBfZ4fNL6aHi29ZCi54NY0O9JtKQUR0Fk7HSmlgMAtksYjkaqCQOQIW2jNNF6C69R5Mv4RZtmDeyL0dHa5ki0oPHDx6LC1tg1Niop4l2%25252BilrG6bAY9XGxJZOTDMT%25252FhbvnejgIWkrrYPgYuzSeMKgUHL8ZJWHnZdciHJB5u7FW438%25252BpGs1N%25252BRxVs6A6pC0AKWSCUpybAUAlCNOVVmGrBoiz4LNjUe0aW14KxyM7dQHfO%25252FOc9eARjiTpswAeUzA68GY5peyM980UlJ7gmm8k9TKHOMcV2MmZQAeDBdMtIuC%25252BoWpf0tp5mYuHzpAud%25252BdQqUIfWByLtTRKFQjtSR7vYgiy394K7V98Y6CgImpoc5WfxnS6cgsVmgzSIBdmCcchTnTXJqNITfNGvyx6187w%25253D%25253D%257Ccksum%253A1845015585786198883251a643e0bb8afd0883d99373%257Campid%253APL_CLK%257Cclp%253A2334524&campid=5338684594&toolid=10001&customid=Brake Pads

[@mtbboy1993]

I think you should do timeline segment thing so ppl could easier skip the intro, or go back to one part they missed easier. just write stuff in the description with time stamp and youtube does it for you. Like so: 2:44 Zoom brakes review 2:06 Oddesey pedals 2:07 Intro

[@WOLFTICKVIDEOS]

We have done that a few times bit figure it will cut down on over all watch time hours;) but we will on longer videos man, thanks johannes.

[@mtbboy1993]

@@WOLFTICKVIDEOS I always skip intro, no point in watching it.

[@TheCaptainsCog]

Those odyssey pedals are very thick. You may get pedal strikes a lot. Im a bmxer and I don't really run their stuff anymore. Check out the DrBike pedals on Amazon. Plastic with steel pins and smooth bushings.

[@WOLFTICKVIDEOS]

Well thanks for the rundown man, I hope they are alot lighter and suit me well, the other odyssey pedals I have on the GT tear me up so much but maybe we will checkout the DrBike pedals man, thanks again:)

[@TheCaptainsCog]

@@WOLFTICKVIDEOS Jeremy, its Ian Deloach. I changed my pic and im tryin out new channel names. You still riding in running shoes? Get you some flat sole mtb shoes or skate/bmx shoes like vans. Your feet Will have grip for days. No more shinners! Or less at least. Haha.

[@WOLFTICKVIDEOS]

HA HA whats up IAN!!! My man thanks for telling us dude:) but we are going to look into some BUDGET MTB shoes!!!! LOL I need some BAD!!!

[@antihydra5023]

Sir, does it fit in any rotors

[@WOLFTICKVIDEOS]

well the 160mm rotors yes, any bigger and you will need a post adapter 180mm, 203mm

[@mtbboy1993]

KZbin decided that this is my fav channel. 😁 All your old videos pop up. 😁 Am I crazy for running mechanical brakes?😜 So far any fav budget brake? You definitely should do a brake compression and long term review.

[@WOLFTICKVIDEOS]

Ha ha! Actually funny man, Friday's fork review we actually talk about the zooms. But I do like the zoom cable actuated k es so far, so easy to install!!

[@mtbboy1993]

@@WOLFTICKVIDEOS I recently worked Don ym Trp Spyke, the threads on the pistons were worn out so they had too small diameter and threads were too thin, so they kept coming loose, so I installed new ones from a fresh caliper but I will try to find more spare pistons. But now I have consistent brakes agian. But I used these for a long time, think it might be year so same calipers.

[@WOLFTICKVIDEOS]

Good thing to have brakes, our Zooms are shot:(

[@mtbboy1993]

@@WOLFTICKVIDEOS be careful with the guns, or things get shot accidentally 😁 just kidding, not a surprise the brakes failed, but I am sure that's something you can do a video on.

[@WOLFTICKVIDEOS]

😂😂 YES!! And you are so right, ateast we can do a video about it:)

[@farhanferdoush6974]

I have this brake...works good enough for me....but in the rear caliper, the space between the pads is too narrow that my disc rubs with the pad,tried to adjust but the space is too narrow,is there any way to increase The space between the pads?

[@WOLFTICKVIDEOS]

Man have not had that problem...Maybe just ride and wear it down overtime. That or you may have thicker rotors, that is possible as well, try some newer ones??

[@farhanferdoush6974]

@@WOLFTICKVIDEOS Maybe I'll just wear it down as it's new and the rubbing is minimal. Thanks for the advice❤️

[@dadlife8289]

I still stand by my statement that you can ride! Even with that crash hahahahah. You were cooking! That bike flows so well. I want to ride the Cats Meow so bad!

[@WOLFTICKVIDEOS]

LOL like ive said before man, when you are in ARKANSAS give me a RING HA HA:) thaks man and I try??? LOL

[@justsomeone9876]

hi i have a question is its feeling like the shiman cause shimano is snappy and strong id love it if you tell me

[@WOLFTICKVIDEOS]

Does not feel like shimano when it comes to the overall ride and constant use on a long trail. They have a tendency to get weaker over the period of the ride. Now they do feel snappy in the beginning though:)

[@justsomeone9876]

@@WOLFTICKVIDEOS thanks dude i was actually thinking of getting zoom or clarkclout 1 tho im not sure yet

[@WOLFTICKVIDEOS]

👍

[@carlbem9997]

Are they still ok? Or did they broke on you??

[@WOLFTICKVIDEOS]

Brakes are doing wonderful, I recently paired them with a 203mm rotor and work even better after a proper bleed.!! Thanks man and be sure to watch the bleed video💯💯💯

[@jeffbergford4724]

These brakes need a special adapter to bleed. The Shimano kit will not fit these. I use this one (www.amazon.com/gp/product/B073P8M41K/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1). It has fittings for all different brands of brakes. Just be careful of the plastic fittings. I snapped one off while doing a bleed and it is a pain to get it out of the master cylinder.

[@WOLFTICKVIDEOS]

Dude thank you, we will be looking into this for SURE!! Appreciate it man:)

[@allanridesbikes5856]

Damn, crashes. I crashed twice last week. One was on film and a nothing crash. The second smacked my elbows and knees and popped a rib or two. It wasn't on film and glad for that or it would wrecked my camera and probably bruised my ribs even more.

[@WOLFTICKVIDEOS]

Damn man and here I am with a bruised hip!!LOL Could of been a lot worse:) glad you are healing ha ha later man!

[@eMikeBike]

RUJOI sent me the same brakes on my last order for rotes on Amazon.com. I installed them on the Axum (2021 black & blue) and they too came European style Front Right/Left Rear, but they came perfectly sized so I didn't mess with the switch. Thanks for the feedback before on the X-Tech brakes. You have a very positive vibe and I wish you heaps of success with your programming. I am riding streets and gravel trails so I am not constantly on the brakes, but huge improvement with these inexpensive hydraulic brakes from the stock mechanical brakes on most big box bikes! Turning the Axum into an e-bike tomorrow. Happy Easter!

[@WOLFTICKVIDEOS]

Well brother thank you so much man, awesome comment and would not expect anything less (turning the Axum into an e bike) from a guy who is named eBike Mike!!LOL Good luck with your project and man, I rode the Axum yesterday for the first time.......Hope to see you TUESDAY Brother, it was a fun as hell ride!!

[@munchgaming4589]

The lever are good but the calipers are trash,i replaced mine with a shimano deore caliper and boom grips so hard make you go over the bars

[@WOLFTICKVIDEOS]

That's good to know man👍 Love me some super duper good braking action!!

[@drpout7007]

Hey sir. I got questions about tire size. How to know what size(width) of tires that can fit my budget krsec fork and strider frame both 27.5, and I'm using weinmann u32 rims. Planning to buy wtb vigilante 27.5x2.3.

[@WOLFTICKVIDEOS]

Hey man that is kind of a hit or miss unless it's a boost fork. Now I ran a 2.6 upfront on my gt with the krsec forks. As fat as rim size is concerned WTB has a graph on rim size and compatibility you can look up as well. I usually go .2 bigger than recommended, but I don't recommend lol.good luck👍👍

[@drpout7007]

@@WOLFTICKVIDEOS I ordered LTWOO a7, krsec fork, ztto zoom hydraulic brakes. Just watchin your vids and following it lol. Tnx for all the vids cuz!!

[@WOLFTICKVIDEOS]

HA HA HA!! Thats great man not only a public subscriber but a real #WOLFTICKNATION BADA**! Very cool man that just makes me feel good, I hope they are all treating you well:)

[@CediesTeamVideos]

bought this cheap hydraulic brake because of your video. thank you :)

[@WOLFTICKVIDEOS]

Hey thanks brother, hope it works out for you!! Ha ha they are pretty good. Now did you watch the install? If so then you know what your getting👍 we got a bleed video coming out soon on a proper kit for zoom, so I hope you enjoy. Thank you very much!

[@CediesTeamVideos]

@@WOLFTICKVIDEOS yep. :) saw your ltwoo a7 video too haha read the comments. but still i’m getting that ltwoo a7 with z-race though not sunshine. haha good luck to me :) thanks to your vids! i’ve made a review on zoom brake too but it’s in filipino :)

[@WOLFTICKVIDEOS]

LOL I may have watched!! :) Good for you on the LTWOO!! Get a chainguide and BAM!! All quietLOL

[@CediesTeamVideos]

@@WOLFTICKVIDEOS thanks for that :)

[@yousifa4002]

Bro the 8th gear on my taff broke. Can I replace only that gear or do i have to get a whole free wheel. If i have to get a freewheel can i get a cassette instead without changing the back wheel?

[@WOLFTICKVIDEOS]

Well i fit broke I would call Schwinn, apparently they are good when it comes to contacting them direct, just not email, but you will have to get another freewheel or a new rear rim that has a freehub to either upgrade or just stick with an 8spd like you have then later upgrade to a bigger cassette.But try calling schwinn first man, hope they can help you out?

[@KarapanS]

Hello, are there any shimano pads or other brand that is compatible with the stock brake pads? I need to buy a new one because mine needs replacement.

[@WOLFTICKVIDEOS]

Hey man checked into it and it looks like these will work. Got help from some other subscribers! rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FDisc-Brake-Pads-Replace-For-Shimano-M765-M975-M966-M965-Deore-XT-XTR-SLX%2F373089519918%3Fhash%3Ditem56ddde492e%3Ag%3ALz0AAOSwaM9fSalO&campid=5338684594&toolid=10001&customid=Brake Pads ZOOM

[@SHWELL11]

After the price of the MT200 doubled, I got a couple of sets of the Zooms. They work well for EZ to Moderate Riding, but the "Fade" feel never seems to ever go away completely. I think they are a good option for Commuter bikes, and easy trail riding. I'd say they are a bargain at the price point, you just have to figure out if you'll need a more consistent feeling setup for your riding style. These have been perfect on my Mongoose Ripsaw.

[@WOLFTICKVIDEOS]

Good t know man and glad you have them as well. I will try and bleed them again if I can get a proper bleed kit, then I will see how they do for a round TWO!

[@MRRIOUS-lq7nn]

Can you recommend it for xc use purposes? Is the breaking power good? Because if you recommend it for xc use, then I will buy one. Thanks for the answer😊❤️

[@WOLFTICKVIDEOS]

I think this brake set is strong enough for xc def, now downhill I wouldent rely on it. But if you can get them and have a bike shop switch them fork you and bleed properly, then I wouldent have a problem throwing them on an XC bike:)

[@BMOutdoorz]

Was looking for some brakes, might go a bit higher end then these, great vid though

[@Paulklampeeps]

Mt200 is a really good choice

[@WOLFTICKVIDEOS]

Thanks man!🚵‍♂️

[@Chadech]

BM outdoorz i just got the Shimano BL-6100 BR-6100 double piston front and the BL-6100, BR-6120 4 piston rear brake from 365 Cycles on eBay for like $135 bucks for the pair brand new and THEY ARE FREAKING SWEET!! And I'm 6'5" 250 lbs and they work GREAT!!

[@WOLFTICKVIDEOS]

@@Paulklampeeps MT200's are a little overpriced now. We got them awhile back for like $60 bucks. The MT420's are way too much brakes but around the same price as the MT200's these days. I hear people are getting these Zoom brakes and switching the levers and re-listing them, not sure though.

[@hc5816]

@@Chadech what bike do u ride? Most companies have a 250 LB rider limit

[@KKrasGxXx]

Im looking to this kind of review of zoom hydraulic breaks for a long time,zoom releases an oilslick version of this that will fit to my oilslick themed project bike, thank you, greets from Philippines 🇵🇭

[@WOLFTICKVIDEOS]

Appreciate it man and hope yours work out well, thanks for watching us all the way from the PHILIPPINES!!!!! Sobrang cool mo! Salamat ulit at sana may katuturan ako !!!

[@KKrasGxXx]

@@WOLFTICKVIDEOS wow you can speak tagalog man that’s great,yeah i always watched your videos about mtb builds and budget friendly parts and accessories

[@WOLFTICKVIDEOS]

for sure man na pinahahalagahan namin ang iyong panonood at inaasahan mong manatili ka, at ginagamit ko ang Google translate !! LOL Kaya't ako ay nandaraya ha ha

[@lacedariel777]

@@WOLFTICKVIDEOS Philippines 🇵🇭👌

[@WOLFTICKVIDEOS]

@ASIAN DUDE CHANNEL Right on brother:):):)!

[@christianageno6889]

As always is awesome to see your videos thank you for helping everybody out. I want to upgrade to hydraulics but I want a lever that is on the short size so I can use with one finger am I right to think that the zoom is a shorter one than the Shimano? Seems that way from the videos.

[@WOLFTICKVIDEOS]

Well thanks man for appreciating us, lol. Now I think it would be fair to say they are little shorter with more of a curve effect. Rode with them yesterday (after bleed) and they did wonderful.

[@christianageno6889]

@@WOLFTICKVIDEOS can you do 1 finger breaking or do u need 2?

[@WOLFTICKVIDEOS]

Well I can use 1 finger but it will ware it out lol, so they are 2 finger mcguillicutys for sure:)

[@christianageno6889]

@@WOLFTICKVIDEOS got it. Fyi. My full suspension has a 4 piston break setup and it breaks with one finger with no issues. Its probably the extra piston.

[@WOLFTICKVIDEOS]

ok.....sounds like my GT:)

[@RockMumbles]

Maybe look into the ~$12 Tektro bleed kit

[@WOLFTICKVIDEOS]

I will man and I hope they will work, its such a weird design like a butterfly or something?? Ill look into it man:)

[@shippitybob]

I’m using Shimano m355 and they are great

[@WOLFTICKVIDEOS]

Well if our paypal was working we would have some of those right now haha. So you like them pretty good?

[@shippitybob]

WOLFTICK VIDEOS I used to have stock Schwinn mechanical disc brakes before I purchased these and I can tell these are so sharp and sensitive just for $70 I don’t think you need to buy Shimano Deore because m355 brakes do a very good job

[@shippitybob]

WOLFTICK VIDEOS use your debit card lol

[@WOLFTICKVIDEOS]

Right on man, that sounds good;)

[@WOLFTICKVIDEOS]

LOL We need too!!NOT:)

[@peteythebull812]

Any one know the bleed screw size on hydraulic zoom brakes lever? i broke the bleed fitting, is it m4?

[@WOLFTICKVIDEOS]

Not to sure brother, hopefully someone can help...

[@peteythebull812]

​@@WOLFTICKVIDEOS Seriously, no one knows ... Its a mystery.... < you are all up to fuck all, Quit youtubin yesterday.

[@peteythebull812]

Have you seen the title of ya video?

[@WOLFTICKVIDEOS]

So where in the title does it suggest that it's our job to know what size bleed screw is on these brakes?😂 We will make sure to stop "YouTubing" asap🤣 Thanks for the laugh, and good luck on the journey to find the bleed screw size. You know you probably could just order one from the company.

[@icebreaka1969]

That sounds like you are not bleeding it right, if a good brake become sponge after few second, that is air bubble in your system, this is the same way as you bleeding your car's brake, no question about it.

[@WOLFTICKVIDEOS]

Well there is some question about it, because we are not 100% convinced that the brake is good. If you go back and watch the install video you will see that they had to send us a replacement rear brake due to a faulty seal. We have not had this problem with any other brakes that we have used and or tested thus far. We have bled these brakes two different ways and it still has a problem. We are going to try and bleed them one more time in a month or so and see what happens, so stay tuned.

[@icebreaka1969]

@@WOLFTICKVIDEOS well, due to what you guys using it so extreme, I will recommend that not to use those cheap brakes, I have been using Izoom hydraulic brakes about 11 months on my zero 10x electric scooter, and I thought it was perfect too (since I have never experience hydraulic brake before) until last night I have finally put on a 4 piston shimano brakes, that totally changed the way I feel and through about izoom, they are good, but not good enough. but anyway, thank you very much for sharing your video, and be safe out there while having fun.

[@WOLFTICKVIDEOS]

@@icebreaka1969 Not sure if you have looked around our channel but we have several projects and reviews. We try to be the Guenia Pigs on budget parts so our audience has an idea of what to expect. We have about 14 current projects so we don't have the ability to spend a lot of time on one thing, this is why we are so rough on things, to find out if they are going to last. Hope this helps you understand what and why we do what we do. Also please be careful with 4 piston brakes we have the Shimano MT420 on the GT and they will send you over the bars if you are not careful. Thanks man hopefully you watch some more of our videos.👍

[@j.filmssss]

I need new brake pads on my dirt jumper, I decided to go full out and try to find a whole breaking system. Looking for something a bit higher end then these but not crazy expensive (like 150+) anyone have any good recommendations?

[@turnoverace6796]

Ask ur local bike shop if they have some left over after a customer upgrade

[@WOLFTICKVIDEOS]

@ Sauls XS hey man here is a hydraulic in the are you are looking for, we are looking at ordering it and doing a review :)here is an affilaite link rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FNew-Shimano-BR-M355-Hydraulic-Disc-Brake-set-F-R-for-Alivio-Acera-Altus%2F401571415289&campid=5338684594&toolid=10001&customid=Lutu

[@soandsononame8750]

Wolf MAN I’m so hungry rn THAT POPTART IS KILLIN ME 🤣

[@WOLFTICKVIDEOS]

HA HA You know how many people mentioned that in earlier VIDS!! LOL Sorry brother

[@Thrashaero]

ofc i can't help but ask completely off topic and awkward question, what are on the ears? hearing aids? growths? i just want to know what i'm looking at not judging

[@WOLFTICKVIDEOS]

Hahaha It's called cauliflower ear from 22 years of grappling and mma. Hopefully they don't distract you too much from enjoying the video😂.

[@Thrashaero]

@@WOLFTICKVIDEOS ah ok thanks for the chill response, i think i've heard of it just never seen it before. seems like it would feel heavy. i have psoriasis in some spots and people ask me why i have small patches of pink flaky skin

[@WOLFTICKVIDEOS]

well glad you asked, lol. My ears feel like rocks are embedded inside my ears, like one big rock not multiple small ones.Does not hurt and does not effect my hearing:)

[@boracay12]

aagh ,they have those here ,a full set with levers ,line ,calipers front and rear cost about $34 us [philippines , usa exapt ] aagh , bleeding brakes on a bike ;[ maybe ill stick with cable brakes and get the double piston calipers . ...or there are hydro calipers that are actuated by cable pull .

[@WOLFTICKVIDEOS]

Hmmmmm...I dont think there are caliper that are able pull and hydro?? Maybe ha ha but the zooms arent bad for the money man, appreciate you watching us and hope you can find the perfect setup for you!!🤣🤣💪 thanks man

[@boracay12]

@@WOLFTICKVIDEOS yeah they have some here on " lazada" the philippines answer to amazon . The oil is in the caliper . Actuated by cable pull . I think I'll give them a try . I'd post a photo but you can't do that . Maybe a link . s.lazada.com.ph/s.1L6ug . oh its actually from zoom as well.

[@WOLFTICKVIDEOS]

life that's awesome! Figure why not just get fully hydraulic at that point but interesting! Thanks

[@boracay12]

@@WOLFTICKVIDEOS just to keep the combo brake/shifter set up . Not a big deal to swap that out . But I don't need top of the line shopping power . after seeing reviews on the hydro line pull calipers . It's one of those chinese luck of the draw things . Most hold up .some blow a seal after a year or so . I'll probably get double piston mechanicals for simplicity .

[@WOLFTICKVIDEOS]

Shouldn't be bad, let us know please how they do.

[@MTB_Rider_96]

Thanks for the review, very helpful. Not quite ready to buy discount breaks however - just too important to safety.

[@WOLFTICKVIDEOS]

Completely understandable man, maybe look ate th eMt200? They are pretty sweet man and not too bad expensive?????:)

[@throbbinwoodofcoxley6830]

Fun Fact: “Berzerker” was played by Walt from comic book men.

[@WOLFTICKVIDEOS]

Mind Blown!! BERSERKER

[@turnoverace6796]

If u get the syringe bleed kit for avid i think it comes with difrent nippels 😉 nope just cheked my parts box it was a list of nippels but zoom was not on the list. But think u can order mixd nippel set for syringe on ali... and amaz.. might be that the piston seal is shit. My old avid's was hell to blead.

[@WOLFTICKVIDEOS]

Thanks brother an dyes, I have got to look into it and see what I can do its really a pain in the A**

[@DFW639]

@@WOLFTICKVIDEOS You'll need a bleed kit with different fittings like this one: www.amazon.com/CYCEARTH-Bicycle-Shimano-Hydraulic-Professional/dp/B07H2DPXKZ. You were really shredding that trail on a cheap bike, man. Keep it up!

[@WOLFTICKVIDEOS]

Thaks alot brother, I try but it was some bad judgment and riding cold!!!:) Thanks alot for the link

[@jacklo325]

Gotta say, the budget built taff held up really well, good job on that! Granted the mechanical requires about double the pressure on the lever than hydro, i still believe it's more reliable. Would you prefer hydro or mechanical?

[@WOLFTICKVIDEOS]

Thanks man and I would say hydro just because the strength difference. It doesn't ever feel like you will strip out a cable if you squeeze too hard!:) What do you prefer???

[@jacklo325]

@@WOLFTICKVIDEOS yeah, i had some generic hydro, and much like you experienced on the trail w/the zoom, a few light brake action was fine. But the long hard braking the levers felt too soft. I had to pump it a couple times to build up the pressure. Maybe i didn't bleed them correctly. I feel like the old mechanical are more trustworthy, imo...

[@WOLFTICKVIDEOS]

Yeah I mean they still do use the v-type:) So there must be something to old technology:) Thanks dude

[@unionpacificomaha]

Awesome video! Ouch hard crash, glad you were alright. My rim brakes on my marlin 4 are like that.i got race pads and they suck until they get warm and sticky. Pretty good for 43.

[@WOLFTICKVIDEOS]

You are right man, $43 aint bad!! Gotta figure out the bleeding stuff but other than that they are solid for the money, OUCH is right ha ha thanks U.P.O

[@PRamsey77]

Wolfman sitting down with a fresh kill of Pop Tarts for breakfast. Haha

[@WOLFTICKVIDEOS]

Mmmmm Pop-Tarts😁

[@benmillns8976]

It sounds like air is getting in the brakes somewhere or maybe even there was some trapped that you couldn't get out with the bleeds. I had a nightmare bleeding my rear Clarks M3 brake. In the end I took it off and was shaking/tapping the caliper and lever at different angles while pushing oil back and forth... It actually worked but I'm not looking forward to the next bleed!

[@WOLFTICKVIDEOS]

😂😂😂Man sounds way toooooo familiar, it was a pain on the GT's a while back lol, thanks man, practically had the bike upside down rattling the hoses!

[@timborice22]

Oh man, went from casual talking to silent crash out of nowhere! Haha, hope you're alright bud! Took that like a boss 👊

[@WOLFTICKVIDEOS]

Man I cried and edited it out! LOL Thanks TIMBO:) MY MAN!

[@timborice22]

@@WOLFTICKVIDEOS hey at least you took the blame, didn't blame the bike for being cheap! When I fell this year they blamed my bike for being 500 bucks not 3000, which caused me to crash....when I know it was just my poor judgement lol

[@WOLFTICKVIDEOS]

Completely feel ya man LMFAO!!!

[@joshuaolorida662]

Zoom is really advisable or not? 😅

[@WOLFTICKVIDEOS]

LOL? Hmmm....If you can take it to a bike shop and have them swap over the levers and bleed them properly, then yes. If it all up to you make sure you have the right tools, but all in all they are pretty sweet for the price, I would buy again!

[@onemorelight3883]

@@WOLFTICKVIDEOS can i ask u something about this brake(zoom) compare to mt200shimano. what is better?

[@onemorelight3883]

@@WOLFTICKVIDEOS i didn't skip add

[@WOLFTICKVIDEOS]

@One More Light-hey brother the MT200s are better I would say, def worth the extr $30:)

[@WOLFTICKVIDEOS]

@One More Light-Well thank you very much man, it really helps when people watch and we are happy some people like you understand that!! Thanks man

[@mtbboy1993]

1:49 plastic pedals is a bad idea, no replicable pins too.

[@WOLFTICKVIDEOS]

Yeah a little weird about those but we will try man. The pins just are so sharp and scare me!!

[@mtbboy1993]

@@WOLFTICKVIDEOS sharp? Yea when new, but hey will wear same with metal pedals where pins are integrated, they get polished and get slippery, but sharp replecable pins you can replace, and continue to have great grip. So pedals like thos elastic and integrated pin pedals, are going to wear faster, so only one or few years lifetime depending on use I guess.

[@danboyes7477]

That looked like it hurt man! Glad to see there was no permanent damage. Not sure I'd like that feeling of losing the brakes, might just stick with lower end shimano or something. Great vid as always 😎

[@WOLFTICKVIDEOS]

LOL appreciate it Dan, all is good and hoping to get me some new bars soon:) Late dude!!!

[@brandonwaller2427]

Great, now I want pop tarts 😂 Dude thanks for the shoutout!

[@WOLFTICKVIDEOS]

🤣 I know I know but Jeremiah had just toasted them for me, so I had to eat them while we filmed. Thank you man for all of your support, and for representing the #wolfticknation 🙏

[@BerserkerNick]

Thanks for the awesome shout out and stickers, I'm going to have to buy you guys coffee more often

[@WOLFTICKVIDEOS]

LOL for sure man we will be sure to take care of you! HA HA so please buy us more!! :) Appreciate you BEEERRRRSSSEEEERRKKKKEEERRRR!

[@ronilaba]

Glad you made it ok after that crash bro.

[@WOLFTICKVIDEOS]

Thanks man, just a bummer the bars and other stuff:( But you are right, gotta be thankful those are replaceable lol now me? NO WAY!!

[@mtbboy1993]

5:12 doing the fork adjustment on the downhill Luic Bruni style. 😄 www.pinkbike.com/news/what-was-loic-bruni-adjusting-on-his-fork-in-lousa.html

[@WOLFTICKVIDEOS]

😂🙏

[@jackanddan]

Wow fancy smancy guys .... be careful bro wowza that trail looks so fun🤘🤘🤘🤘

[@WOLFTICKVIDEOS]

HA HA I dont know how fancy but very whicked of a trail man!!! Intense and very fast;)

[@samfisher930]

Make sure you have Maxxis tires on the bike 🚴 I’m glad you are safe Where is your elbow pads 🦊

[@WOLFTICKVIDEOS]

😂😂😂😂 I had them on!

[@fabulosou]

Nice riview. hope u okay dude. My foreman just suggested this zoom brake.keep it up man.🤩🤩👏👏👏🤘🤘🤘😊

[@WOLFTICKVIDEOS]

For sure man I'm all good! Thank you for watching brother 🙏

[@brooksridesbikes]

Definitely a good looking bike

[@WOLFTICKVIDEOS]

Shes sweet!

[@andymtb5714]

"Thanks for the cup of coffee... uhh..." lol Anyway, loved the vid guys! Those Zoom brakes will do the job, but I might just get a budget Shimano brakeset, idk.

[@WOLFTICKVIDEOS]

Thanks Andrew and yes they will get the job done uuuhhhhhhh......yep;)

[@partyatjayshouse]

Berrrrrzerrrrkerrrr. Hahahahah. Pretty solid crash. Saw it right as it was happening. Glad you’re a tough guy and are used to taking hits. Time for some carbon bars!!!!

[@WOLFTICKVIDEOS]

LOL very funny man and maybe some carbon bars??? But it kinda scares me if I go the cheapest route?? LOL But man we appreciate the coffes and want you to email us your address please so we can send you some stickers fool:)

[@donn5956]

planning to buy zoom hydraulic and get to see this review this helps a lot. thanks!!

[@WOLFTICKVIDEOS]

You are very welcome Ivan, thank you for watching and hope you can get some at a fair price!!