Zoom MS-50G Multistomp with M-vave wireless MIDI

[@TheMarcospatroni]

With my app Midi Chief you don't need the BT adapter and you can connect MS50G and Katana at the same time.

[@thepedalpicassos]

Awesome!!! Do you have a video we can see???

[@TheMarcospatroni]

@@thepedalpicassos kzbin.info/www/bejne/hompnmltfLCZoZI

[@TheMarcospatroni]

@@thepedalpicassos find "MIDI CHIEF" ans you can see another videos

[@masterofreality230]

Ok, I was just making sure it can do PC for pedals. I am about to get this, their Midi Keyboard and their Midi Daw controller all for about $130 US. Thats a pretty awesome upgrade to my system for the price.

[@Mafangoolio]

Exactly what I was looking for! Very much appreciated

[@thepedalpicassos]

Glad it helped!

[@Intenzity]

What is the dongle you use? any links?

[@zishenwang-u1j]

cool, ordered one to control my Ms50g 🎉

[@thepedalpicassos]

Awesome mate! Have a blast with it!

[@medinaeng8090]

What is the correct cable to use from the midi dongle to the Zoom pedal? Can you do a video on configuring the Mvave with Cube suite to work with the Zoom.

[@tinytaboo]

same.. I purchased the chocolate but i do not know how to program this

[@hanzozheng5516]

​@@tinytabooMe too. Have you solved your problem？

[@jplee3]

I just got the Mwave Chocolate and MS1 w/ USB adapter and have been playing around with it. I also have an MS50G - Not sure what I'm doing wrong but I can't get the Chocolate to talk to the MS50G via the USB dongle. I've set in Program Change A and also tried Advanced Custom mode assigning Bank A in PC mode with the corresponding channels but it doesn't seem to want to talk. Is there a setting that needs to be configured on the MS50G itself in order to get things to work properly? EDIT: I had to use a different USB cable - apparently something was wrong with the one I was initially using or it was charging-only (if that even exists for mini-usb). After swapping cables, it worked as expected

[@thepedalpicassos]

Hi Jeremy. I know I had to play with the MVave app to get the MS50G to respond. ALSO…some usb cables are “charge only” and not comms cables, so check that too.

[@olivergallardo8289]

Hello, greetings from Mexico, I have a question and I would like if you could help me, if you increase the bet and connect an expression pedal to the midi controller to be able to use the wah and whammy effect, is it possible?

[@Sancho_Retablez]

Éso estaría genial. Pero veo complicado cómo se podría asignar según qué parámetros al pedal de expresión.

[@danielrosas5489]

​@@Sancho_Retablez la versión plus también se puede conectar de esta manera?

[@Sancho_Retablez]

@@danielrosas5489 No lo creo y, personalmente, no te recomiendo el plus. Mi caso: tenía el MS-50G y lo vendí cuando sacaron el plus. Me compre el Plus. Lo devolví y volví a comprarme el "viejo" MS-50G, que (por lo que sea) aún sigue a la venta. Repito: es mi caso, pregunta, busca y saca más conclusiones aparte de la mía.

[@g43s]

Can you make a tutorial on how to do this? i dont quite get the USB dongle thing and how to connect it to the m-wave midi controller. do you need an external device to make the connection? can it be customized to switch between the pedals inside a patch or is it just to switch between patches?

[@thepedalpicassos]

Hi Gabriel. On our channel is a playlist for the MS50G and a few videos on wireless midi with the usb dongle and a wireless midi adapter or the MVave. I’m pretty sure you can only change patches with usb midi control on the MS50G.

[@2ffer4]

please help me. Im using ZOOM MS-50G. The bluetooth works fine and its connected but I'm confused why I can't put and save/bank effects/preset. All the connections are correct and i followed all the toturials here in youtube. When I press M-VAVE to choose effects its not switching to the screen of ms-50g so I cannot save a different effects/preset. Thats my problem its not jumping any effects when i press my MS-50G and its updated now version 3.10... thanks

[@thepedalpicassos]

Make sure your usb cable is a communication cable and not just charging only. You also need to save your MS50G patch as a favorite: A,B,C etc.

[@2ffer4]

@@thepedalpicassos i did... its connected to MIDI B .

[@maykelmusictv9498]

How to connect the controler to zoom

[@johndunn5185]

Update- I called Zoom support to see if I could get any pinout information on the USB and they indicated they don't have the information. Does anyone out there have this information? What pin on the USB are midi related and the associated signals.

[@thepedalpicassos]

Hi mate! I’ll ask Rod! He’s an electrical genius

[@crisepuyao7722]

Can I setup a button for tap tempo?

[@johndunn5185]

Is it possible to provide the midi changes from the pedal 1/4" TRS to a USB directly to the Zoom. I know this is possible with the Headrush MX5. The MX5 uses a 3.5 TRS for midi. I think ii may just a matter of creating a 1/4 TRS wired to the appropriate pins on the USB at the zoom. Any thoughts?

[@thepedalpicassos]

I think it is possible John. I’ll have to experiment again but I’m sure the TRS output can be configured for midi or expression out.

[@johndunn5185]

Thanks for the reply. I know the TRS will talk midi to the MX5 with it's TRS input. TRS 1/4 to 3.5mm straight through. ? for me is the USB pinout - to match the TRS up with the USB.

[@kasarraial]

Can you active/desactive any ecfects in chain inside paths like a stomp ?

[@thepedalpicassos]

I’ll ask Rod!!!

[@josephbusuttil3030]

Thank You for this KZbin Video Can the Chocolate be connected directly to the ZOOM MS-50G via the right USB cable, thus eliminating the MS-1 altogether ? (... as I intend to have the ZOOM MS-50G and Chocolate Controller near each other on the floorboard )

[@thepedalpicassos]

I’m thinking Yes. You will need a trs to usb cable; from the Chocolate to the MS50G. I’m going to try it myself!

[@edrieldelacruz3741]

@@thepedalpicassos Hi! Did you already tried the TRS to Mini USB Type B connection? If yes, did it work?

[@Oheyjim]

Have you any luck with the hotone ampero control 4 Im try to get it the work with usb

[@TheLordcasio]

No one ever explains what MIDI channel the Zoom CDR is on, or what commands it will respond to...pulling my hair out, trying to sort it out.

[@MrSandySmiles]

I hear you. What eventually worked for me was connecting the small midi adapter to the Cube Suite App on my iPhone via Bluetooth, and changed its settings to Host Only. You can connect the chocolate too and adjust its settings using the same app. That worked for me. Hope this helps!

[@TheLordcasio]

@@MrSandySmiles Thanks friend. I will try this. Thank you for responding!

[@yammo5068]

how to you connect this? MS50G to phone and Mvave BT to phone? thanks

[@thepedalpicassos]

The M-Vave transmits to a usb dongle that is plugged in to the usb port of the MS50G

[@junmorelo6436]

hello sir... im having an issue on my zoom MS7CDR m-vave chocolate bt wireless midi controller set up the bluetooth connecting and all are properly configured but not working on slave device any advice on this?

[@thepedalpicassos]

I’m sorry. I have only tried the MS50G. I cannot confirm the same is achievable on the MS7CDR.

[@rayraypornias6287]

How did you do it I mean how does it work ...how did you connect the m-vave to zoom ms50g...

[@thepedalpicassos]

You can buy a wireless usb dongle that plugs in to the MS50G via the cable that comes with it. Then you wireless connect the M-Vave Chocolate to the dongle and you’re set!

[@rayraypornias6287]

There is this videos about cube suite I don't know how does it work ....I mean if you turn on the m vave chocolate do I need some some connections to work it out coz I've tried it but I think it doesn't work like that sorry tsk tsk tsk had a lot of questions....

[@Jed_Phoenix]

Can you use it for tap tempo in any of your patches?

[@thepedalpicassos]

I don’t think the Zoom has a midi CC message for tap tempo.

[@marklaz5435]

is the latency tolerable when changing patch? or is there a setting that you can make it seamless when changing patch?

[@NeverEndingCorruption]

I have this setup and it works nicely although I cant control effects in the chain I can control the numbered patches 1-4 and the change is instant

[@gian_paulo]

@@NeverEndingCorruption have you tried this now? same concern is the seamless when changing patch

[@NeverEndingCorruption]

@@gian_paulo yes patch change is instant and works well for me in a live situation. I have the pedal setup as this. Channel 1 2 3 4 etc… only one mod in each selection the midi pedal will change 1 2 3 4 etc… and I am able to turn on and off selected mod on the zoom. Did my response answer your question?

[@gian_paulo]

@@NeverEndingCorruption are un in cycle mode (a-b-c) or can call it as patch mode, like while continous playing and you are in PatchA and press the knob to move to patch B. Is there any volume cut? Or latency issue

[@roychan2160]

Hi bro. to make it easier for me which particular wireless dongle are you using? Thanks

[@thepedalpicassos]

Hi mate. I cover it in this video: kzbin.info/www/bejne/pamcc6ied5J3etk

[@pedrogrisolia5459]

How did you provide power for the ms50g?

[@thepedalpicassos]

Via the usb. The dongle is a thru device so you can have it plugged into power at the same time.

[@bobbywilliams4655]

Would this be a good companion for the ToneX pedal

[@thepedalpicassos]

It would be an affordable companion. There are probably better companions for the Tonex though.

[@LewWelchThePoet]

🤘👍🏿