ZR Tactical PDP &PPQ Captured Recoil Guide Rod

Checkout our new brass basepads for the Walther PDP and PPQ platform. Our Captured stainless steel recoil spring guide rods are also now live online and available for purchase. These will be preloaded with flatwire springs in 3 different weights. Upgrade your PDP
zrtacticalsolu...

[@Uncleprepper1]

That is the SLICKEST PDP slide I have ever seen. Just WOW!

[@graylonperson9012]

that is super slick

[@resolute123]

Who did your slide? Holy ship it's beautiful! Very Art Deco!

[@Zale180]

Really nice carbon fiber look on your slide 🔥. Who did the engraving for you?

[@robertkwiatkoski1292]

Are you going to make a captured guide rod for the pdp-f series with 4" barrels? I know you have one for the f in 3.5". Thank you.

[@zrtacticalsolutions]

They just take our regular captured rod

[@tommygarrett7251]

Which spring is equivalent to the factory green for suppressor shooting? 15#?

[@kickingworld]

If I’m running 115g FMJ and 124g FMJ and HP most of the time and only occasionally do 147g HP, what would be the best spring weight? 15? Compared to the “Springco” yellow and red color options what would the poundage be versus theirs as far as poundage per color in red and in yellow vs your 13 and your 15? And lastly, on the outside of the rod - the end near the muzzle on the exterior of the gun, will it look black still or does it change the color to more a steel color? I like the black and was hoping to not change the look. PS - what’s the factory PDP Full Size 4” pounds set for on the spring? I really didn’t feel like the pistol kicked as bad as people say. I’m more concerned about replacing that cheap garbage plastic thing that bends! I can’t believe they put that in such a nice piece.

[@puma51921]

Sharp looking gun

[@joshweber4120]

Seriously! Who did that slide?!?! Answer us PLEASE!

[@zrtacticalsolutions]

We have a guy

[@ChrisFromThe740]

I love the baseplate you sent out, you guys definitely make great products glad I found your company.

[@stevestory8483]

What is the reduction in "snappiness" going from the stock to the 15lb? Really liked the gun but didn't like how snappy it felt

[@zrtacticalsolutions]

13lb reduces more recoil. 15 is better for carry. As for how much? Hard to quantify. Depends on ammo, shooter, etc

[@morafilmco]

@@zrtacticalsolutions Question: What makes the 15 lbs better for carry?

[@zrtacticalsolutions]

@@morafilmco More positive return to battery. Better for hotter ammo

[@morafilmco]

@@zrtacticalsolutions thanks!

[@Nyrlyat]

About to purchase one of these. my PDP is my EDC, would a 13lb or 15 lb spring be best for me? I'm mainly looking to make it less snappier, but unsure which to buy

[@zrtacticalsolutions]

15lb

[@ronhoffman7941]

Will the extra mass 18 be good for +p ammo? Have 4” full size. With underwood ammo.

[@zrtacticalsolutions]

Yes. OEM is 18.6

[@ronhoffman7941]

@@zrtacticalsolutionsthank you

[@AVH8TOR]

I like em. I use my pdp for my edc so everything is stock. The one thing I wanted to change was the guide rod. Not a fan of the plastic one. What guide rod and spring weight can I get from you all that will not affect functionality and reliability? And possibly dampening the recoil just a bit.

[@zrtacticalsolutions]

15

[@Revolver34]

Love the design on the slide, did you have that done or buy a slide that came like that?

[@natpeterson9735]

What are the details on the finish of your slide? That looks so sick

[@zrtacticalsolutions]

Burnt bronze creakote with a black wash over it

[@hasenhase3428]

Don't you think the manufacturer had something in mind by choosing a mainspring? The force need to go somewhere. Who know glock gen 1 looking block digging into the slide ...mostly seen on guns "i've never changed the recoil spring for 20 years and shot 1 million rounds" PDP spring is very stiff and hard to rack the slide, without discussion, but i believe this is on purpose and not walther going through the warehouse randomly put some leftovers together 😂

[@Popfiato]

Will your guide rod work in a Canik SFT?

[@zrtacticalsolutions]

No clue! We've not tested it.

[@ronhoffman7941]

Also I have a 45 with all the weight on the front which keeps the recoil down Muzzle flip.

[@turbonola]

Why yall didn't just start out with this. Lol, now I gotta spend more money on this damn money pit pdp.....unless yall can modify my uncaptured guide rod into a captured joint.

[@LucyLu70]

Im a newbie to firearms.. However I wanted to definitely change the factory recoil assembly on my PDP F series 3.5 and I also want to change the trigger as well? Im trying to modify my PDP F 3.5 to help reduce the recoil and snappiness I have carpal tunnel and Im so happy that I stumbled on to your channel

[@robertkwiatkoski1292]

have you done the mods yet? If so did the new guide rod assembly make it harder to rack the slide? Thank you.

[@LucyLu70]

@@robertkwiatkoski1292 I was able to change the recoil guide rod and it racks a lot easier than before. I haven’t had the chance to change the trigger, I actually got use to my trigger.

[@robertkwiatkoski1292]

@LoveableL70 what spring / guide rod assembly did you get? brand, speing wieght? thank you. i had thought the Walther tungston one would be great for added wieght up front and then add a wieghted back strap. 1) not in stock,2) Walther rep said the nrw assemblies change the spring wieght and make them darder to rack. Lighter racking was the 1st consideration when we purchased this pistol. thank you once again.

[@LucyLu70]

@@robertkwiatkoski1292 I bought this one WALTHER PDP-F 3.5" CAPTURED STAINLESS GUIDE ROD I have carpal tunnel and honestly this one worked for me just fine

[@darenalleyne466]

😎

[@jimmyavery867]

How much for a 15lb

[@zrtacticalsolutions]

On our website. $65

[@KingMusa99]

Definitely adding this to my new Walther.

[@willraven7]

Yes, 2nd the question on the bronze slide!??

[@wongkeebs4327]

I wish i went to the captured. Installing the uncaptured was a pain in the ass.

[@czgunner]

For what this costs, why is this better than something like the DPM or Sprinco for $20 more money? Not being contrary, just asking a serious question.

[@zrtacticalsolutions]

The DPM over springs the gun. It’s opposite.

[@alecplooff]

Living too far on the wild side going for the 13lb spring for my EDC 4"? Go 15 to be safe?

[@byronbranch4645]

15

[@alexanderw8345]

I’m running a comp currently on my PDP pro compact and have been looking at your guide rod/spring set but don’t know if I should do 13 or 15. I run 115g and 124g ammo most of the time

[@zrtacticalsolutions]

Depends on the comp. Generally, 15 is good all around.

[@anthonys239]

I have the same gun and just got the Herrington arms comp. Did you end up trying this captured guide rod. And if so what pound? I also shoot mainly 115 to 124 as well.

[@AllenReiser98]

Do you need to have a mag well to run the base pads?

[@zrtacticalsolutions]

Nope! They work great without

[@AllenReiser98]

Thanks have been using both the aluminum and brass base pads for about 2 weeks now and absolutely love them! Shipping was also very fast, I was wondering if your plus 2 pdp base pads work in the compact mags or if I have to use the 18 round mags