You make it look so easy...I would never try to tackle that job.
@bigd98484 жыл бұрын
You have a wide variety of knowledge.This is a video that will help many looking how to do this. I always search KZbin for things I need a little help on.Great job Brian ✊💎
@icurt064 жыл бұрын
I didn't know that replacement lenses were available for the C6 corvette. I was pretty intimidated to remove the front bumper on my 05. After watching a bunch of KZbin videos I decided to give it a try. Its really not too bad. The only thing I remember that you forgot to mention were the two10mm nuts on the bottom in front of the condensor. Really good video Brian!!
@johnwagner45594 жыл бұрын
Love these DIY vids! Hope your healthy and happy! Beautiful car!
@mikeyp24474 жыл бұрын
The Corvette King!
@J-dizzle20213 жыл бұрын
You saved me some time for sure. Thanks for sharing and nice job of being careful and doing a job that many people don't do like that anymore. Do it right the first time and you will never go wrong. I just subscribed and just saw your channel for the first time. Thanks again. Have a great weekend. 👍
@KrispyKarl74 жыл бұрын
10:25 love to see junior watching call of duty warzone while dad is putting the vette back together 😂 I don't have a Corvette but still watch these videos anyways just cause you uploaded it :) keep up the good work B!
@apexdetail854 жыл бұрын
Jordan Adamowicz 😂😂😂
@bryanewing5973 жыл бұрын
Thank you very much. I will attempt to replace my headlight covers in the next couple of days.
@fuel_magazine4 жыл бұрын
Wow this video is awesome!! I have been wanting to replace the headlight lenses on my C6 Z06 for awhile but haven't because there weren't any good videos on how to do it. Very professional video. Cleared up a ton of my questions. Thanks again and keep up the great work!!!👍
@jamesmacrury4902 жыл бұрын
You didn't look very hard. There are TONS of videos available on replacing the lenses. While this video is good at explaining how to remove the headlight, it skips over several steps in replacing the lenses. While I commend him on the headlight removal part, I only give 2 stars (out of 5) on the lens replacement part.
@lorenreyes28554 жыл бұрын
Nice Ride! ZR1! I'D be doing replacement lenses on these headlights? You make this look like easy peasy! It looks like new! Thank you very much Brian! Great video with your care and knowledge!
@syphadeous4 жыл бұрын
Nice! Off topic question... love the blue in the engine. Where would one find the replacement caps?
@inglando3 жыл бұрын
No need to apply sealant or adhesive for the new lenses?
@Piglet62564 жыл бұрын
would be a smart idea to ppf these lenses maybe?
@koby13203 жыл бұрын
Did you use any type of silicone to secure/seal the lenses to the housing?
@Piglet62564 жыл бұрын
Well I did a headlight restoration and it turned out way better then it was, just some minor spots left but that seemed to be inside the material itsself. Not sure if it could be removed with sanding so i left it as it is. My mom was very happy with the result though and the light are bright again like they should. but those spots looked alot like the damage on these, so i guess they cant be removed then?
@falconator34193 жыл бұрын
I thought you had to heat up the outer surrounding, just as you did when you went to take it off, once you put on a new cover in order for it to seal properly. Is this true?
@johnyaskoveakarpaccio47372 жыл бұрын
GM shouldve made these lenses ALOT easier by 2 clips underneath/inside the hood-area...taking apart a car like this for 'headlight lenses' seems ridiculous to say the least, but seems this is the only way;GM never thought all these videos would be out with all this knowledge is my guess.thanks for the vid btw!
@apocalypse4874 жыл бұрын
I buy extra clips for the ones under the car. I don't like to reuse those. I have a metal pry tool for those also. The plastic pry tools you're using, I use for the interior or really sensitive objects. I did a retrofit for my Civic where I had to follow this same process.
@apexdetail854 жыл бұрын
Apocalypse487 classic Civic? Bet it looks badass!👍👍
@apocalypse4874 жыл бұрын
@@apexdetail85 I wish haha, it's a 2008 EX. It looks classic compared the the newest I guess. I don't have it now, but I'm gonna do the same thing with the 2019 Impreza Hatchback. Sorry to burst that bubble. Both of your cars are coming along real nicely.
@mikespooner99634 жыл бұрын
Great job! That’s a lot of work, is this your ZR1?😎
@apexdetail854 жыл бұрын
Mike Spooner this is a customers ride.
@mikespooner99634 жыл бұрын
Apex Detail it’s a beauty and in good hands!
@True_Knight4 жыл бұрын
What year is the ZR1 in this video?
@richardseem79484 жыл бұрын
great tutorial and video again buddy...
@chadj83494 жыл бұрын
Looks great 👍, but damn pulling an engine or transmission seems easier than that.
@sandro23044 жыл бұрын
Hey Brian, do you have the car on jack stands in addition to the lift jacks on each side?
@chrismurphy7834 жыл бұрын
Would it be worth it to put a coating on the headlights to increase longevity? Another beautiful vette!
@apexdetail854 жыл бұрын
Chris Murphy yes... Cerikote.
@davestewart91464 жыл бұрын
Looks great Brian, will you still put some kind of protectant on the new lenses?
@apexdetail854 жыл бұрын
Dave Stewart yes... Cerikote.
@thomascollins74297 ай бұрын
I notice you say seal the new lens in..........How and with what would have been nice to mention.
@norcalspitshine90674 жыл бұрын
Nice thanks Brian
@AmirAbdullah4 жыл бұрын
Nice !
@35POSTCARDSS4 жыл бұрын
Thank you best video out there!!!!
@chucksharin5884 жыл бұрын
On CorvetteForum.com there are at least two sellers of repro lenses. Ive read DIY threads where they talk about heating the assy in your OVEN to get the OE sealant to release and a much more labor intensive ordeal for R&R'ing the LENSE......Your video and install didnt look anything like what I was expecting....Can Brian or somebody with knowledge please explain.....
@DRMSAB14 жыл бұрын
I agree with Chuck. Many other videos on KZbin showing the process of removing the adhesive then re-sealing the lens back in place. You didn’t mention or show that step.
@jamesmacrury4902 жыл бұрын
@@DRMSAB1 He missed several steps or at least did not show them on the video. I have done the lens replacement on my own Corvette and while it's not extremely difficult, it is time consuming. From everything I have learned in the research I've done prior to replacing mine, the sealant material holding the lens, which he uses a heat gun to soften to remove the lens, should be replaced. There is also an oven method of heating this material where the entire headlight is placed in an oven at 200 degrees for about 15 minutes to soften the material. It should also be warmed to make it easier to press the new lens into the material so that it seals properly. The new lens should also me clamped to ensure that it stays sealed prior to replacing it in the vehicle.
@lifeofbrian95114 жыл бұрын
Is there anything you CANT do?😁
@apexdetail854 жыл бұрын
RedEX yes... take a vacation!
@koioo24 жыл бұрын
@@apexdetail85 alberto seen this video
@koioo24 жыл бұрын
a small joke we had in 1973 a Volkswagen beetle and to change the lamp and the lens took 4 screws for and in the back. after we got Volkswagen polo oxford www.flickr.com/photos/fil82/6263848839/ think still simple and then came en.wikipedia.org/wiki/Volvo_300_Series its was slight not so easy a few years ago 2 or 3 times the aaa club did a test can you remove a lamp bulb your self on a modern car out of 5 contesters, 1 could for me this a complicated heart replacement ^ _ ^. and all just to get the headlight out.perhaps ones you ben there its as easy as drink a soda and clean your teeth kzbin.info/www/bejne/m5O1lplqqdJnqa8 the d is the same as the 2016 e so redex and I looking forward to the new video
@koioo24 жыл бұрын
a small joke we had in 1973 a Volkswagen beetle and to change the lamp and the lens took 4 screws for and in the back. after we got Volkswagen polo oxford www.flickr.com/photos/fil82/6263848839/ think still simple and then came en.wikipedia.org/wiki/Volvo_300_Series its was slight not so easy a few years ago 2 or 3 times the aaa club did a test can you remove a lamp bulb your self on a modern car out of 5 contesters, 1 could for me this a complicated heart replacement ^ _ ^. and all just to get the headlight out.perhaps ones you ben there its as easy as drink a soda and clean your teeth kzbin.info/www/bejne/m5O1lplqqdJnqa8 the d is the same as the 2016 e so redex and I looking forward to the new video
@sccarguy4 жыл бұрын
I have couple confidence you took the extra steps to clean and correct and maybe even coat the black inner bezel before re-assembly just didn’t show the process in the interest of time lol
@bfielder90974 жыл бұрын
Great work, cool that you offer these kinds of services too. C6 ZR1 is such a great car. Are those all season tires though? If so that's pretty disappointing on a vehicle like this.
@grinddetailing4194 жыл бұрын
They build the Corvette around the headlights...:)
@bulldurham664 жыл бұрын
Why would you not put a Ceramic coating on these. I would think it would just prolong life
@henryfreeman61134 жыл бұрын
I enjoyed watching you preform car surgery 🤣
@brianthomas33544 жыл бұрын
Drill master and Zr1 surgery look awkward together. 😂 ...the size of that drill looked challenging in those tight spots.
@rumrunner17564 жыл бұрын
I’m so old that I remember headlight replacement meant removing three Phillips screws and a spring. 😩☮️
@Allauthenticsoles7 ай бұрын
You didn’t do the most important part removing old glue and installing new butyl sealant….you will have condensation in no time with this half ass “refurbishment”