I strongly suggest to clen your mouse really good before you try open up the switch. Mice are notorious for getting gungted up. Many times it is just some dust or debry. If that does not work just try to clean the switch as they can get gunked up too. Use air duster and if that dose not work you can try come circuitboard cleaner. Then if this does not work you can try too fix the switch.

You said build... not watch you play... Where is the build.?

80% is a "dangerous level"? ) Have you seen 3000% on a gauge I wonder? Good old vid besides

Hail to the chief

I don't understand there's like no different between chopper and temple guard

Can't find the Part 2 :(

Your commentary is all over the place. Stay on topic and stop wandering off dribbling nonsense. It’s hard to listen to.

What even is this video... Let me cut away when I should be showing you how to put the switch contact back together... Fantastic

Could we have software solution from Logitech, because the hardware reparation comes with high risk

Not only do I have the double click problem, sometimes it doesn't register left clicking at all. I was in a chat with logitech support for, I kid you not, a couple of hours, doing all sorts of click tests, and in the end they said "if there's not any other problems I wish you a good day", and I was like "YOU DIDN'T HELP ME AT ALL!!!" This has seriously scarred my relationship with logitech, I've only had 3-4 mice in all my life as they all worked flawlessly for allmost a decade, but this mouse was malfunctioning after little more than a couple of years. Oh and am I the only one that has serious problems with the Logitech Gaming Software. It randomly doesn't open on boot, sometimes it opens two processes instead of one, and it evens defaults all my settings. As I told support, I probably won't ever buy a logitech product again, which sucks as they used to be the best edit: literally had to press the post comment button trice to get it to work, stupid mouse

Anyone knows the actual code for getting berserk in this version? Tried putting IDBEHOLDS but does not work in the command for some reason.

your camera sux

Do not work your video!!!

2 Things. First: Coooool build! Second: minute 7:00. What's the song? The song! Let's go find it with you Fantastic ASP, please! And Share!

It's called the Asp Explorer, not the A.S.P Explorer? My life is a lie...

Do this codes work with PS3

As to kill warrant scanners, i gotta be honest, they really arent worth the time. If you want credits, a single mining run will only take a couple hours and will give hundreds of millions, possibly over a billion in profit. Combat is fun, but its not where you want to make all your money, just rock an extra booster and focus on the pew pew, the kablam or the dakka dakka dakka for a combat ship. If theres anything you ought to bring for combat, its some limpets for the looting.

Thank you for this video. This m ouse however is really bad piece of mouse. Worst I ever had, the Mac support is awful.....

You didn't show the disassembly of the blade. I've been trying to figure that out to repair one.

No thanks. Logitech should be doing this for us for free or just sending us a replacement.

on smaller weapons your best bet relies on the special effect you want to put heat or Cascade or something on those are targeting scramblers or anyting it's not for damaged it's to mess up the other guys s***.

make then efficient and have zero heat

is this any good for DCS ? Doubt it

Man, what a talker you are. You talk for 20 clips like this. Even if I put you ro 4x, I got bored listening to you. Sorry about this, but you can do better to make traffic.

So....I can't just bring it up normally like I would in Fallout New Vegas or Morrowind and/or Oblivion? All I had to do there was press the "~" key and it would come up just like that.

I succeeded perfectly my experience: you don't need new pads. The button plate placement is much more intricate than it looks, be prepared to fiddle allot there. There is actually notches where button plate is placed, use other button as a reference to place it right. ! EDIT NO BENDING NEEDED ! And maybe you actually need to bend it in opposite side, because look at how it works, you need more tension to stop double clicks, but be very gentle :] EDIT! Actually you don't need to remove that plate at all (Rutvik comment below) there is grease on the plate you need to clean, and yes i saw that grease and it was cleaned while i was fiddling with it :D

None of those modules have a rating of a? Does it mention it?

How relevant is the build today?

That's a lot of mats to build the worst combat ship I've ever seen 😂

Do we have part 2 of this one? Btw I like your Elite Dangerous videos

decent explanation, allows to use basic FA off for quickly turning in combat, slowly learning FA off is not that bad before anything advanced... tho I have to ask, why turreted multi cannons? Gimbled would do just the same only with better damage

You don't fix these switches. You will buy better series from Omron and replace them.

Thanks this video help me a lot

I'm looking for PS3 version. Are there any codes?

The Python build tackled a Master Anaconda while this FDL fought Dangerous ships. Makes a difference.

First of all, there's a typo in your title! (It should say double-click) Thank you so much for your video. I hope all people who are considering "upgrading" to the G604 find this. That mouse is truly awful, and now I have so many old G602s to get back to working order. In my case, I didn't really intentionally bend the little metal piece. Instead, I cleaned it with my ancient Radio Shack contact cleaner. I also didn't bother disconnecting that ribbon cable and just was careful with it. Unlike other commenters, I couldn't really see any discoloration on the metal thingie, but it worked. But it's a PITA to get that thing out and to put it back in, especially if your hands shake like me. So next time, I will just use a Q-Tip or something to carefully apply the contact cleaner to it without removing it. Also, I had a hell of a time trying to figure out how to get the switch cover off because it's not that clear in videos. There's a tiny, little gap along the vertical corner that you can stick a small object into. I had a pair of extremely fine tweezers from an acne extraction kit, and those worked great for both that and removing/replacing the gold thingie (don't worry, they were never used for their intended purpose, lol.) Also, I put a Band-Aid (couldn't find tape) on top of the switch cover to keep the white button in place during removal and reseating. Hope this helps someone!

Miss your videos bro

I fixed it !!! Thanks to you !!!

20 minutes talking about Core Internals. Dude be simple and straight!!

how do you solve the overload on power?

Review your arm hair

Can you access cheats without the console

Watching this in 2022 it's fascinating to see how things have and have not changed.

Make the video!!! We need that 😂

I got my mouse left click works as a new so you save me money and enhance my patience! One thing that is missing in your video is how to properly put back in place the little metal copper use to click, I found how in this video: kzbin.info/www/bejne/aKTLaH6titqXqqs After a lot of guess and try while my hand shaking (i'm not a surgeon!), I found that using a tool was not the best for me so I goes the same way presented in the video with my finger and then, most important after I get it in place, I had to push with a tool in the middle of the plate to drop the curved metal part in place and that's it! Thank you !!

Not at all a combat build.

I have a non-functional G602 that stopped working soon after buying and I never contacted Logitech, and another G602 that I use for my regular PC which has just recently started to give me double clicks, intermittently. I'm pulling a switch off the non-functioning mouse, but getting all three of those legs unsoldered to remove the switch from my spare mouse is challenging.

He said or maybe my method just sucks I died laughing🤣

I avoided this because it's not even 6mm scale. it's supposed to hold 12 mech. an actual union class dropship at 6mm would be closer to being a basketball in size.

Nice Learjet bro