Пікірлер
@Unknown.0645 Күн бұрын
Those have not been used yet lol.... Sounds like bs
@BrandonSeayJr 4 күн бұрын
Bro i didn't want this i wanted to see a heritage unit
@rob8392 5 күн бұрын
I have a brand new Dewalt jig saw and it will not stay on, it is the worst tool I have ever owned. It truly is garbage, will never buy any Dewalt tools again.
@Namaste-Birju 5 күн бұрын
Hi it’s been a struggle for me to find the right power and speed to engrave clear acrylic with S1 20 Watts. I would really appreciate if you wouldn’t mind sharing the settings please and thank you.
@MasonWoodshop 5 күн бұрын
While I’m not a complete expert, it’s unlikely that you’ll be able to engrave clear acrylic with a diode laser. There may be ways to apply something to the surface to get some sort of etch (like you can with glass and tempera paint), but I’ve never been successful with clear acrylic.
@Marco-Alexi 5 күн бұрын
Reviewed by someone who doesn't seem to understand how to use the turrets/scale to set depth, and also plunged and routed without depth locked. I'm always confused by people doing reviews on products they don't appear to understand themselves...
@amyjane2814 6 күн бұрын
With the s1 and etching glass, do you have to coat the glass with paint or a vinyl backing for the laser to etch the pattern? You can't just put any colour of glass sheet in and have the design etched without some additional preparation?
@MasonWoodshop 6 күн бұрын
Correct! The method I’ve used with the S1 is to paint the surface to be etched with black tempera paint. It’s generally worked quite well for me the few times I’ve used that method.
@chrisgoyette1846 6 күн бұрын
Great video, awesome table! You could inlay replaceable cutting strips in a few spots so you can keep the top for longer. Good luck. Peace from USA
@MasonWoodshop 6 күн бұрын
Thanks for watching and leaving a comment!
@joewink2088 6 күн бұрын
Did you hurt your thumb? lol
@MrTanker10a 8 күн бұрын
I am enjoying my LS1019L. Great review on the saw. Why was I watching your video since I already own one? A lot of times when you are looking for how to do something? These reviews can be used as "spot reminders" of some forgotten features. I have totally forgot about how to store the fence doing a Bevel Cut. It turned out that there is small clamp on the side rails to clip them in place (User Manual). And yes I do agree that MAKITA could have design the fences to slide. My previous workhorse DELTA Miter Saw's fences also slid. I am not sure what the people at MAKITA were thinking. I do agree with you Mason. It's a great saw. I have installed mine on the BOSCH (T4B PORTABLE) FOLDING GRAVITY-RISE MITER SAW STAND WITH WHEELS...I don't do job site. But, the mobile table is great for moving this saw In, Out and around the garage because this thing is a heavy beast. I have no business lifting this thing anyway (with a bad back) at best. Check it out!!! The MAKITA's version does not appear as nimble to me and that was why I did not purchase the Makita version. I have both BOSCH Mobile table for the table saw and the miter saw. For flexibility and they can be collapsed and be put away... Just A Thought.😎 Cheers!😎
@MasonWoodshop 8 күн бұрын
Thanks for watching and leaving such a great comment!! I’m finding that I’m using the saw for more construction projects at home and have been wanting a solution to make it more portable. Your suggestion of that stand is something I’m going to check out - thank you!!
@MrTanker10a 6 күн бұрын
@@MasonWoodshop You are very welcome...I am not sure how to send you a picture of my configuration to check out...😀
@josepadron6817 10 күн бұрын
making a height ruler for my niece, just bought this plunge base, this video was exactly what I needed because I’m going to carve out the numbers. Thank you so much for the helpful information 👍🏽
@MasonWoodshop 9 күн бұрын
I'm so glad it was helpful!
@bradleytuckwell4881 10 күн бұрын
Very nice
@LivingTheLifeRetired 11 күн бұрын
It looks like the Makita is a direct drive whereas the Bosch cannot be direct drive given how far the motor is from the blade.
@FryChicken 13 күн бұрын
Is the centering only so good with the centrotec or also with the Jacob's chuck? Does the centrotec accept regular hex bits?
@emielvandenbroucke764 13 күн бұрын
I dont know why but my mini systainers keep popping out of the rack, do you have the same problem with yours ? Thanks for the video. Greeting from belgium
@MasonWoodshop 13 күн бұрын
Oh wow, that’s interesting! I’ve used mine quite a bit since posting this video and I’ve never had one pop out.
@christinemazzawi 13 күн бұрын
Name of the software 🙏🏻?
@MasonWoodshop 13 күн бұрын
I’ve been using xTool Creative Space (XCS) with my xTool lasers. You can also use LightBurn, but I find XCS much more user friendly.
@pattyf3984 16 күн бұрын
As an option, could one use the Bosch PR110 subbase that is threaded to use with the template guides?
@stevenlin6927 16 күн бұрын
watch your video. buy the edge guide right away. thanks.
@antoniovasquez1448 16 күн бұрын
Man I love that attachment
@24KDessertChic 18 күн бұрын
Great video, but Xtools does advertise that the P2 & P2s can engrave a variety of metals. 😊
@MasonWoodshop 18 күн бұрын
Thanks for watching!! The P2/P2S won’t be able to engrave metals due to the nature of the laser, however, it can indeed mark them when using a metal marking spray. I’ve done this a handful of times without issue and while it may seem like an engrave, marking is quite different. Here’s how to do it: support.xtool.com/article/787
@vivekgupta9111 19 күн бұрын
We are manufacturing engineering steel square 2" to 36" Aastha tools
@robwasnj 21 күн бұрын
Thanks for telling us all we needed to know. I'm looking to change out my 12" Makita (old one) because it's just not accurate, I was considering the Bosch but after seeing this will look elsewhere, maybe he Makita or Festool.
@MasonWoodshop 21 күн бұрын
Thanks for watching and commenting! While I have really liked the Makita in the couple of years of ownership, I am planning to move to the Festool in the new year. I’ve tried is buddy’s Kapex a few times and it’s an impressive machine! Worth the cost? Probably not. But my main hobby is more about appreciating and learning the tool, and not just the results I get from it (I know this isn’t a common take).
@robwasnj 21 күн бұрын
@@MasonWoodshop Nothing wrong with being a tool reviewer and finding enjoyment in that. KZbin is polluted with too many AI generated reviews that are actually more harmful than anything so channels like yours become truly valuable. After watching many videos I'm leaning towards the festool myself when the time comes to change out the saw I've been using.
@joyweber4659 22 күн бұрын
I bought the S1 with 40 watt module. Just starting to use it and pretty sure I'll love it. I also have a 10 watt M1 and the F1. Thanks for sharing your thoughts!
@MasonWoodshop 22 күн бұрын
Thanks for watching! It sounds like you’ve got a great setup!
@meilyn22 24 күн бұрын
Great video! Didn't feel like you were talking too much. Just straight to the point giving out vital information. I just got my Festool today. I think the manual is great, but I am just watching festool domino videos.
@MasonWoodshop 24 күн бұрын
Thanks for watching! It’s a great tool and there are so many great resources out there on it. I learned a lot from Sedge at Festool.
@chadrye8088 24 күн бұрын
Beginner? This setup is something i'm aspiring to. Beginner would a tabletop diode laser for 200-400 bucks. You got like 5 grand worth of stuff there.
@-ThePREACHER- 25 күн бұрын
*WOODPECKERS FOR THE WIN!!!!!!!!!* As expected.... Took me 5 years - but I *FINALLY* got the set of 12" and 18" triangles. *ALL* my tools are set *PERFECT* now!!! *GO WOODPECKERS!!!!* (Ya get what ya pay for - for SURE.) p.s. - Watched till the end... .008 or LESS. It's wood... I'd say .001 - but humidity on a day to day can fluctuate it that much. So... for my fences - .008 over 18" + is acceptable. And woodpeckers brings that to the table. GLAD I SPENT THE MONEY!!!!!!!!
@fifadid 25 күн бұрын
Has anyone successfully tried it on glass? I'm a fused glass artist and I'm thinking about getting that exact same model. I read it works if you use black tempura painting over it but I'm yet to find clear reviews about it.
@MasonWoodshop 25 күн бұрын
I’ve had success frosting glass with cheap black tempera paint. Results were generally good. I cover that in one of my subsequent videos featuring the S1.
@fifadid 25 күн бұрын
@MasonWoodshop do you think the 10w version would also work on glass?
@MasonWoodshop 25 күн бұрын
@@fifadidnot 100% sure, but since they are both diode lasers it should work, just likely without the same intensity of the 20W.
@fifadid 25 күн бұрын
@@MasonWoodshop I see. Thank you for your input!
@paulr7719 26 күн бұрын
Hey there... Thanks for the video. I have a nine inch deep shelf in my box truck, and the bag measures 10 in deep according to their website. Does it have a little bit of flex to it to where it might still fit? Or is it stiff?
@MasonWoodshop 26 күн бұрын
Great question! I just checked mine and with two tracks in the bag I was able to easily compress it to about 8.125” without any concern.
@paulr7719 26 күн бұрын
@MasonWoodshop awesome. Thanks for taking the time to answer my question, I appreciate it.
@MasonWoodshop 26 күн бұрын
@@paulr7719 My pleasure! The bag has held up really well over the past couple of years.
@frankk2351 27 күн бұрын
You hand wasn't parallel to the edge the whole distance. Thus the pencil tip moved away from the straight edge. Practice consistent form with knife and pencil
@boydstongrove 27 күн бұрын
Great tutorial, just got my S1 a few days ago and got a lot of good pointers, thanks!
@MasonWoodshop 27 күн бұрын
Enjoy the new machine!
@soapmode 27 күн бұрын
Would this be able to do wood inlay/ veneers or is that more for a CO2 laser setup?
@MasonWoodshop 27 күн бұрын
Great question! It certainly could as long as the material is thin enough. I also have the P2 CO2 which gives a bit of a cleaner cut with 1/4” material.
@soapmode 27 күн бұрын
@@MasonWoodshop Thanks for replying, I just pulled the trigger on the S1 with rotary kit and air purifier.
@designstogrow882 27 күн бұрын
What if your mft holes are not perfectly aligned and lets say your first hole is 2-4mm off from the last hole? Are there options to adjust this fence system to make up for that so you end up with perfect 90 degree cuts?
@MasonWoodshop 27 күн бұрын
Great question! As long as the holes are perfectly in line (regardless of spacing) you’ll be okay as the fence dogs can be positioned anywhere in the slot on the back of the fence. If the holes are not perfectly in line, then you’d run into issues unless you just use two fence dogs.
@semperstitchingllc7801 28 күн бұрын
Thanks for the review. Just curious how you would connect the inline fan with the smoke purifier? P2 -> Inline Fan -> Smoke Purifier? I see that you don’t have them connected together. Is it an either/or situation where you either have the inline fan or the smoke purifier?
@MasonWoodshop 28 күн бұрын
Great question!! For me, I’m going with the either/or route. If I were to chain them together, it would be P2 to purifier to inline fan. While I’m not 100% certain, I’d imagine that putting the inline fan between the P2 and purifier could result in some weird pressure being generated.
@MonChouMoiToi 28 күн бұрын
Instead of MFT Workbench (18 Months Later), you show EVERY SINGLE tool you have, every single? Not EXACTLY... You forgot the saucepans, plates, griddles, shoes, and toilet papers (Let me guess, from Festool?). ... ... Hell... That's becoming more and more REDICULOUS!!!
@MasonWoodshop 28 күн бұрын
Sorry if it came across that way, my intention was to setup the table to showcase the way I use various tools on the MFT, not as a showcase of the tools themselves. I’ll take this into consideration with future videos.
@spartan_7389 15 күн бұрын
This is exactly the video I was looking for. Every video just shows the build process, nobody talks about long term use. Thank you for a great video, don’t listen to this pessimist
@MasonWoodshop 15 күн бұрын
@@spartan_7389 Happy to hear the video was helpful and thanks for the kind words!
@cabrera2320 29 күн бұрын
I'm totally getting one this week. Thanks for the honest review, mate!
@MasonWoodshop 29 күн бұрын
Awesome, thanks for watching!
@ArtisansEdge-c9i Ай бұрын
Genuinely a big Thank you for such a detailed review! Cleared a lot of questions I had. I live in an apartment and wondering how to expel out fumes from my xtool s1.
@MasonWoodshop Ай бұрын
I’m so happy to hear that it was helpful for you! I’ve continued to use it the past couple of weeks in cold Ontario without venting outside and it’s been amazing. You’ll still get some smoke/fumes that leak out the laser unit when you open the door to the S1, but the AP2 does an excellent job pulling out the majority.
@markdavis9990 Ай бұрын
Strange…my track sticks nicely. Never had a problem.
@chrome00 Ай бұрын
What would you use the storage for?
@ericaddington5417 Ай бұрын
I just ordered a set so I don't have an opinion on their workability but Rockler has a set of 2 "Dust Right 2-1/2'' Clamping Hose Holders" which might help with your hose aggravation.
@markobanovic6880 Ай бұрын
Thank you!!!
@e.elektron Ай бұрын
Спасибо за отличный инструктаж. Вся ясно и понятно.
@volkanduran Ай бұрын
I'm having problem to connect my MacBookPro as you said, how did you solve it exactly?
@MasonWoodshop Ай бұрын
That’s too bad. I did have an issue when I tried using my own USB-C cables but when I switched to the ones that came with the laser (and with the included adapter) it worked properly.
@volkanduran Ай бұрын
@@MasonWoodshop thanks for the reply, Do you use a USB hub to connect laser and camera? I can only see one USB port connected on your mac.
@MasonWoodshop Ай бұрын
@@volkanduran Sorry for my late reply. I don't use a USB hub to connect both, but I do use the two cables (one connecting printer, one connecting camera) to two USB-C ports on my MacBook Pro using the included cables and USB-A to USB-C adapters. I originally tried alternate cables as well as a hub but that didn't work for me.
@lpa74 Ай бұрын
Thanks for the videos you made on this jig.I ordered one from amazon and Ill be using your videos as a guide
@MasonWoodshop Ай бұрын
Thanks for watching and leaving a comment!
@CaseyTXFA Ай бұрын
Finally using mine after owning it for like 10 years. Cutting a circle. Great video.
@ThomasKloos1965 Ай бұрын
Just an observation here, but if you clear coat the natural slate coasters before you engrave them, I agree it makes them look better, but you also rendered it useless for a coaster. The condensation of the drink will run off on to the table you are trying to protect. Great Video! I just received my S1 20W and will add the 2W IR when I can. Thanks for a great video!
@MasonWoodshop Ай бұрын
That is a good point - I hadn't thought about that! Thanks for watching and enjoy your laser!
@scottshumate6716 Ай бұрын
I have the 12" corded Mkita saw. If you are framing houses, it's great. If you are making doors where insanely square is important, it is garbage. it can be set square, but it will not stay square. The aluminum detent plate is also garbage--the detent notches wallow out quickly. Replacing the detent plate with a stainless steel plate helps a bit, bit it does not change anything about its inability to remain square. Laser is okay. Soft start is great. Reasonably quite. Dust collection could be worse. Squareness is junk. Strongly do not recommend for precision work.
@RODKIRBY-k8c Ай бұрын
Thanks for posting. This is great video, well explained .Iwill be getting one for XMAS.
@MasonWoodshop Ай бұрын
You won't be disappointed!
@SimPilotRick Ай бұрын
The two watt laser is not just a less powerful laser. It is a completely different type of laser it is meant for engraving into metals. The 20 w and a 40 watt are diode lasers which are great for leather or wood or acrylic. But to reiterate they are completely different types of lasers.
@nathanwolf5547 Ай бұрын
I’ve installed my P2S today. I have the F1 and Ultra so this is my first big laser.
@MasonWoodshop Ай бұрын
That’s amazing! Enjoy.
@remcovanderheide9318 Ай бұрын
I just recently got the new updated edge guide for the 1010. It already has the fine adjust in it (1mm per rotation) It is amazing! can't wait to get the LED light attachement.
@MasonWoodshop Ай бұрын
I’ve also been really liking the new 1010 Edge Guide. It’s what it should have always been, so I’m glad it’s out! The light module is definitely something on my list to get.
@cubansli3099 Ай бұрын
Thanks just got mine and it keeps stopping and giving error code. M9039 S4. Worked great for an hour. Any thoughts?
@MasonWoodshop Ай бұрын
Interesting! I haven’t had any issues with mine so far, so I’m not familiar with the troubleshooting you’d need to do. I’d recommend reaching out to xTool support.
@7elemente 17 күн бұрын
Hi, did you solved the problem ?
@cubansli3099 9 күн бұрын
@@7elemente Yes they pushed a firmware update, so now it works fine Thanks