Thank you for posting this. The plug in my 21 JLU was missing ,did not know that until I went to find it following your video.

Next time if you remove a plug measure the orifice so we know what size grommet to replace the plug with. Whatever you feed through that won’t last long.

Where’s the video on you shootin this thing? I’m buying this on Monday but I can’t reviews of people shooting it

Your XL650 setup tutorials are the best quality ones I found. Thank you so much. Just curious where are the ones for Part 1 and Part 4?

Are the Ethernet normal straight thru cables?

Thanks! Very well done

Watcha smokin there

i bought round magnets with fibreglass rods that screw into the magnet they go in the rifle barrel cost me 30bucks 2 seconds to make you can cut the rod whatever length you want made 15 of them

Bought two 550’s and two 1050’s (over a long time) due to your videos

which powder did you use 6.5 grendel?? I’ve managed to “stock up “after tryin find one powder that is consistent 322..xbr8208 CFE.. going to try the various of shooters world ..but the warm days are becoming chilly in the morning…too cold..I become a “hermit”! the cold i’d not my “buddy”!🇺🇸🦅😎💪💪👍✌️

Well. This 10 year video opened my eyes and it made it clear that the $270 investment on this third party gadget and all the steps to follow to install it, it's just not worth the effort for a rifle designed to use with open sights. It makes more sense to me with all due respect to others that have installed theirs, to invest my money somewhere else. Thanks for sharing this great video!

Not sure what happened but my brass turned almost black after I did this. Is it ruined?

Please note that my comment here is based on my experience and what I was taught by my instructors back in 1986 on Ft. Campbell, KY. Back then I was a young E-4 and tasked to go to the 101st Sniper School (don’t confuse this with the Designated Unit Marksmanship Program or Marksmanship Improvement Course) which was ran by Mr. White and Mr. Bosworth who were both Snipers while the 101st was in Vietnam. Mr. White stressed that the scope bracket must be the same type of metal and heat treated in the same manner as the receiver. It’s just plain foolish to use an aluminum bracket or some other formed steel bracket that we’ve seen on the market until about 20 years ago. The first M-21 rifles had the rear sights removed to provide a 3rd point of contact to secure the bracket to the receiver. As the rifle heats up and cools down the steel expands and contracts so if different steel alloys are used, their expansion rates are in conflict with each other and it distorts the bracket causing sight deviation. I use this same bracket as seen in this video for those reasons along with a Leatherwood M-1200 scope (sometimes I use an old Leatherwood Cam-Puter scope) and the results are very positive. Some will install the scope bracket by heating up the rifle to about 150 degrees then tighten everything down but that’s up to you depending on factors that impact your environment, munition type and goals. Hope this helps friends.

I can’t remember hearing or seeing the bullet detail, brand, weight, type. Squirrelly.

You need to clean the grease out of the side hole in the receiver. The lock tite will not hold.

Gotta say, for the money you have in that rifle, that's not very good and definitely not "lights out".

I run a 105gr MKZ over a stout charge of n530 in a 24" upper from Sanders armory and get a little over 2800 fps out of it. Groups normally hover around 1/2 moa, but sometimes get closer to 1/4. I'm using hornady brass, and get a fair number of fliers that open groups up to 3/4. 123gr factory ammo generally gives 3/4 at 2600. 123gr reloads over 8208 runs 2500, but stays 1/2 or under.

Thanks for being straightforward and to the point ! 👀👍🏻

Thanks moving to the next upgrade.

Was this guy smoking at the reloading bench!😮

Just watched this AGAIN: what is the "fire ball" coming out of the back of the round in the slow-mo's? Tracer? ROCKET ASSIST?

About to attempt my hand at installing a Wouxun KG-1000G in my Wrangler JL. Not being super handy, this is some good information! I saw another video that mentioned this but on a different wrangler model but this is the first I’ve seen it on the JL. The JL slot is not as easy to reach but way better than drilling new holes

that was very interesting informative video I have never reloaded but thinking this machine might be the one to get

Pull the primers before cleaning

no they dont all come with plastic main spring housings, i have four kimbers and not one has a plastic housing

bytchLak is how its. pronounced

What bullet

The reverse light is what I would use the most. Have the input trigger the lights automatically when in reverse, but then can turn them on physically at any time. What is confusing me is can you run two units from the same touch screen. I keep seeing all the stuff about sources, and selecting them, but can not find anything on their site about how to hook two together. I did see you have your connected together, the stuff on their site is not real clear you can do that or how, just mentions they can be set as sources.

Took 12 minutes but we got there.

how to purchase for a mount

What length and size gas block you use?

On the front sight are you sitting the pusher block on the bottom horizontal area at the groove or the tall vertical area?

Why have you stopped making videos?

No help here

best tool ever

What bipod is that? Link please.

What's the diameter of this hole?

Great set up and tutorial.

10 years later you’re still helping people with this.

Thanks for the video.

Nice, was looking at a way to mount an RCO on my tanker.

No one can be bothered to explain how to pull out trigger assembly

Haven't had a chance to test if it holds zero, but mounts just fine and has nice clear glass. Centered vertically true to a plumb line with the crosshairs which is always a plus!It's a great kzbin.infoUgkxc4K63Fd5LglDMObu7-Bgapxp_ef0W8hE scope. There's no parallax adjustment or focus ring, so may be limited to 3-7x, have to see how it is on the range. Also be aware that the rings are "look through" so you can still use irons, but they are really tall if you only intend to use the optics. On a 22LR no biggie since I'm not shooting competitions or worried about a hard cheek press. Will boresight and range test, if all goes well, I'll leave it at that!

Anybody ever have a problem with these? Do they hold zero?

Thanks for posting. Why can't you start with the Key installed first? Seems a little crazy to start with the side-screw first, then pound away?

Don't knock yourself, it was a great video!

Nice job well explained. TY!

Thank you, I could not quite figure out that part of my new 650. Excellent video in my humble opinion, and it is very much appreciated.

The upside down star logo... man! Defying God and embracing Pan the tranny goat head lucifers insignia. What a rebel! Like those people who blaspheme Jesus, just to appear superior to some "made up God." Well... y'all better hope you're right. The Bible is down to proving its final prophecies. All the rest have already played out. Several in our lifetime... The rest are happening right now.

merci pratique bien expliquer !!