could you help me with my st225 buddy? where are you based
@JUSTDOIT-wv1jb15 күн бұрын
Does everything work as it should after 3 years? Do the brake pads wear equally? I see that on the website it says that it is for focus st250 and you put it on st225, which is great. Does any other spacer center the brake disc better or is it 5mm perfect?I'm from Serbia and I'm looking for a way to improve the brakes on my focus st225.Thx
@RichardDommett3 ай бұрын
cable ties ?
@NaomiKaminoGalante3 ай бұрын
Great video, but could the oil capture system be working, producing or releasing it into the atmosphere? I was unsure about the hose positions, I'm from Brazil and I wanted to replicate this system in my car! Would you help me?
@toanmai56723 ай бұрын
Attach a 5mm spacer to remove the disc. Is it technically safe to operate?
@Oilyhands7494 ай бұрын
When fitting bearings you should only put pressure on the outer race. There are many tools on the market to fit this bearing correctly all push on the outer race only.
@Sr.incognito.1794 ай бұрын
hpla friend, I have a focus mk2 1.8tdci, I want to install the front brake calipers from the focus mk2 st, do you know if they are compatible? can I install them?
@davecozzie14 ай бұрын
Does the 5mm spacer have to be on before the disk or after it? Or does it make no difference alan?
@andrewharrison70276 ай бұрын
Do you sell the engines looking at buying one to put in my 1.6 Ford focus?
@markstuart99326 ай бұрын
Huge thanks. Really helped me with removing and replacing my ST225 steering wheel
@CalebCarpenter-ny7sc8 ай бұрын
how did you make that top part and how is it attached
@subikazaferi15019 ай бұрын
Did the car have any symptoms. Or you just noticed it when it was open?
@AlanYoungST2259 ай бұрын
if I remember correctly no was going to do a full video on it till it was cracked
@subikazaferi15019 ай бұрын
@@AlanYoungST225 damn, i'm gping to do it in 2 weeks on mine. Its 131'000 Km and it runs perfectly. Cross the fingers i guess..🤞🏻
@manuelpiston10 ай бұрын
Im not sure if you can answer this question. But what piston ring gaps should I run on this engine?
@AlanYoungST2259 ай бұрын
Unfortunately not all ring gaps are done to that engine
@manuelpiston9 ай бұрын
What do you mean I don't understand
@BBoyTobi9710 ай бұрын
good video. Is there a way to put an y adapter between the intake and the hose that goes back to the filter housing? i know its better bur in germany for the "TÜV" i need an hose that goes to the intake bridge. maybe you know what i mean
@AlanYoungST2259 ай бұрын
am sure there would be yes
@stephenhendrie485611 ай бұрын
What’s happened to the videos Alan ? Do you still work at BD👍
@AlanYoungST22510 ай бұрын
Hopefully the videos will be back next year. yes still at bd thanks
@Lolpower77711 ай бұрын
will all the steering controls work like purise control
@AlanYoungST22510 ай бұрын
Unfortunately not. Thanks
@ИгорьФомин-ф5т11 ай бұрын
Please tell me the answer to my question. I have a Ford Escape II. It's based on Focus. I don't have enough regular brakes. There is a desire to install a reinforced Brembo kit for the RS. I have three questions: Is there any effect from this kind of work? No need to intervene to replace the main brake cylinder and vacuum booster? Can you tell me the size of the posterior tomosal disc of the RS? Thank you, I will be glad to answer.
@Nesumee11 ай бұрын
Niestety taki sposób montażu piasty uszkadza nowe łożysko.
@imvaderst11 ай бұрын
Anybody know the spacers used? The ones I got wouldn't fit in the rotor inner diameter
@janosbarath114411 ай бұрын
Hy what is the diameter of the brake disc of the equipment? Thanks
@leespeirs7949 Жыл бұрын
Ha AL can u run the 4x4 with out moving the turbo
@AlanYoungST22510 ай бұрын
you can yes. You can use the ST or RS turbo
@peterpower0495 Жыл бұрын
I'm sure someone could figure out how to make the steering wheel controls work. Here in the US guys take full dashes and interiors from a 2016 Ford super duty trucks and put them in the older trucks because the bodies are the same from 99-16. And guys even make full modules now to make it all plug and play. I'm sure someone will come up with something for the Focus platform.
@stephenhendrie4856 Жыл бұрын
Nice job Alan makes a big difference,I’ll be dropping into Bd in the near future to get my car done 👍
@AlanYoungST22510 ай бұрын
Thanks.
@mrhuss4939 Жыл бұрын
How long does the full replacement take?
@AlanYoungST22510 ай бұрын
About 2 days if you don't run into any problems.
@gregappdevs8775 Жыл бұрын
Ye why did this series stop?
@AlanYoungST22510 ай бұрын
I do have more videos of this that are done and hopefully coming next Year.
@TheGaryprice Жыл бұрын
Alan we getting any more videos fella?.
@AlanYoungST22510 ай бұрын
YES I do have more videos of this that are done and hopefully coming next Year.
@TheGaryprice10 ай бұрын
@@AlanYoungST225 good lad.😂 👍
@madmarv4n Жыл бұрын
How how much would this cost?
@AlanYoungST22510 ай бұрын
a lot and that's just in parts.
@southernvapersden1304 Жыл бұрын
Will this cause the car to smoke when coming to a stop/hault?
@AlanYoungST22510 ай бұрын
it can yes.
@southernvapersden130410 ай бұрын
is there anyway the smoking part can be avoided? lol getting bit annoyed when coming to stop when car is hot and then puffs bit @@AlanYoungST225
@JoshuaHardman-gh5ql Жыл бұрын
Has this got liners or block mod
@AlanYoungST22510 ай бұрын
just a block mod.
@mohammedsarfaraazsultan5950 Жыл бұрын
Hey bud I need some help with a engine wiring and piping diagram
@filippofiorito2494 Жыл бұрын
Why not use the same pcv valve and direct the oil vapor discharge outside?
@Marthy27 Жыл бұрын
New steering wheel definitely looks better.
@AlanYoungST22510 ай бұрын
100% agree.
@craigmorrison3385 Жыл бұрын
You getting the head skimmed after fitting the valves ? I’m a diy mechanic mate please don’t judge my comment lol
@AlanYoungST2259 ай бұрын
it was yes
@gregappdevs8775 Жыл бұрын
Hey Al would be nice to see some of the AWD parts and how it was done.
@AlanYoungST2259 ай бұрын
Unfortunately that was done buy somebody else when he got the car
@gregappdevs87759 ай бұрын
@@AlanYoungST225 thanks for the reply, see you haven't posted in a while. Any new content on the way?
@paulsoames7980 Жыл бұрын
Does anyone know the millimetres of the spacer he uses to put behind the disc ?
@filipbojkovic2217 Жыл бұрын
5 mm. But I don't understand why are they necessery?
@paulsoames7980 Жыл бұрын
@@filipbojkovic2217 it spaces the disc out so it runs in the middle of the caliper
@Dieselantics Жыл бұрын
Nice video and looks really easy to fit, however am really shocked at the cable tie method of attached the brake hose to the strut, very much a bodge, and they are HEL brake lines too!!!
@williamdaniels367 Жыл бұрын
Hi do you know if the focus st or rs steering wheel mark 3 will fit in the 2015 ford transit connect tourneo
@AlanYoungST22510 ай бұрын
not a 100% sure on that one.
@davidanderson5893 Жыл бұрын
Subscriber 972 calling to say well done. I'm enjoying watching your videos. Keep it up and good luck.
@AlanYoungST22510 ай бұрын
Thank you.
@markberry96762 жыл бұрын
Hi mate I have a 2007 focus st and in fourth gear I’m hearing a whining noise you had any experiences with that? I was told the gearbox may need rebuilding just thought I would ask before I spend loads on it. Thanks
@flan81822 жыл бұрын
Is there any chance you could send me the dimensions of the hutch as I would love to make one.
@AlanYoungST22510 ай бұрын
am sorry I don't have that tool box no more I got a bigger one.
@HipHopPlayaMan2 жыл бұрын
Do you havs a List of products used cheers also great video i have a mk2 st and could do with some attention underneath 😭
@domicars06532 жыл бұрын
wonderful result, but it is the horn work with the mk3 steering wheel? because if it works I think I'll make this change on my car too
@paulfritz42492 жыл бұрын
If you use the crankshaft locking tool number 1 piston will.be on tdc is that corect.
@AlanYoungST22510 ай бұрын
That is right yes
@simon2knine2 жыл бұрын
Great tip with turning the bolt on the hub... Up until now i used a small wedge..
@AlanYoungST22510 ай бұрын
Your welcome.
@joebreadon55332 жыл бұрын
Great video, part 2 isnt in your playlist of restoration 😉👍
@RsClanAreBack2 жыл бұрын
Will these fit behind the standard mk2 st alloys
@clancydocwra76062 жыл бұрын
Top video mate 👌
@NatoSmokyDRFT2 жыл бұрын
Hi Alan , really good video ! Just a quick question , is this the same or near enough the same process for fitting and lsd to the st225 gearboxes? Cheers.
@AlanYoungST22510 ай бұрын
it is yes
@iKASHMONEYY2 жыл бұрын
Hi does this work on a non st but same exact car
@AlanYoungST22510 ай бұрын
it should do yes.
@Hauuy-el1vv2 жыл бұрын
Could you make a video on how to remove the passengers side driveshaft on the st225s. I've done them a few times myself and its always a pain. Just wondering if there's any tips or tricks to make it easy for yourself