Ford Focus st225 MK3 RS BREMBO conversion kit VOLVO T5

Hi welcome back to the channel and this video we're going to be doing a MK 3 RS Front brake conversion setup on the focus st225. So in this video I will be showing you step-by-step how to install this kit. This kit was for Aaron"s car he purchased this kit from PumaSpeed. This is a simple kit to install with just a few modifications to the Hubs full Bolton on kit.
This can be a more affordable big break option this kit was about £900 as a K sport is around £1400
When buying this kit from puma speed you don't need to buy the wheel spaces that is an option for this kit as they won't fit you will need to buy some 5mm spaces from eBay that will fit behind the disk

[@GCMYT]

loving it bro :D

[@AlanYoungST225]

Thank you

[@andypoole9261]

Nice looking kit. Well impressed with them. A good upgrade. Great video keep them coming.

[@AlanYoungST225]

Thanks, will do!

[@myfordyi4493]

Hello at the outset I want to express my satisfaction to see your video and how simple it is to make an improvement in the braking system with equipment superior to the standardized I have, I want to make that same improvement to my Ford Escape 2017 titanium this system fits a ford exhaust Thank you for making this video

[@iainwebber-james7641]

Great vid Alan keep it up. I went for the 6pot from pumaspeed which are about the same price😁👍

[@AlanYoungST225]

Good choice!

[@Dieselantics]

Nice video and looks really easy to fit, however am really shocked at the cable tie method of attached the brake hose to the strut, very much a bodge, and they are HEL brake lines too!!!

[@Silversting89]

I'm using this setup since 2019 october, much more affordable than K-sport.

[@AlanYoungST225]

its not a bad set up and don't think a lot of people know about it

[@neilairzee5738]

Whats spacers did you go for? Tia

[@Silversting89]

@@neilairzee5738 5mm under the brake disc.

[@neilairzee5738]

Yes I saw they were needed to space the discs out. But I meant where did you get the spacers from.... ebay 1's or from specific company? Sorry for any confusion.

[@Silversting89]

@@neilairzee5738 i bought from a local company, but it's JapanRacing.

[@stuartcox2993]

Do the 2 pins need to be tapped in the caliper or is it held by tension? Great channel with great content 👏

[@AlanYoungST225]

yes they do need tapped in I did that later on off camera

[@blakeparry1983]

Didnt realise that this was an option on the 225 Only ever saw the collins performance kit which used non-standard rotors In the end i chose to go the Freakyparts Megane brembos and mk2 RS rotors - bit smaller but no modifications to hubs required. Going on next few weeks

[@AlanYoungST225]

yeah don't think a lot of people know about this that's why I did the video on it you went for a good option there

[@dirkbradbury9878]

@Blake Perry Were spacers for the disk required with this kit also?

[@blakeparry1983]

@@dirkbradbury9878 not with my wheels (Team dynamics), havent tried with factory

[@davecozzie1]

Does the 5mm spacer have to be on before the disk or after it? Or does it make no difference alan?

[@enforte]

Do you have to use longer wheel studs?

[@janosbarath1144]

Hy what is the diameter of the brake disc of the equipment? Thanks

[@andrian_andriiv]

Awesome work 😎 I have a few questions. What size drill did you use? 14 or 15mm? Spacer between the hub and the brake disc 4 or 5mm?

[@sonoradrift]

I've seen people mention both the 3mm and 5mm spacers to push out the rotor and center it in the caliper. Not sure which one is best.

[@toanmai5672]

Attach a 5mm spacer to remove the disc. Is it technically safe to operate?

[@Sr.incognito.179]

hpla friend, I have a focus mk2 1.8tdci, I want to install the front brake calipers from the focus mk2 st, do you know if they are compatible? can I install them?

[@RsClanAreBack]

Will these fit behind the standard mk2 st alloys

[@RichardDommett]

cable ties ?

[@imvaderst]

Anybody know the spacers used? The ones I got wouldn't fit in the rotor inner diameter

[@user-fd5sv1qr7e]

Please tell me the answer to my question. I have a Ford Escape II. It's based on Focus. I don't have enough regular brakes. There is a desire to install a reinforced Brembo kit for the RS. I have three questions: Is there any effect from this kind of work? No need to intervene to replace the main brake cylinder and vacuum booster? Can you tell me the size of the posterior tomosal disc of the RS? Thank you, I will be glad to answer.

[@flaviokart16]

Great video bro. Do you know if it would fit a Mondeo Mk4 2.5t? Thanks.

[@AlanYoungST225]

Thank you. Unfortunately they don't I do believe tho the mk2 rs brakes and and the Volvo XC90 will fit.i would do a bit of research on that tho

[@23block23]

Did yous not have to use spigot rings so the wheel would sit central to the hub?

[@AlanYoungST225]

no you would only need then if you have aftermarket wheels.

[@clynemccormick7901]

Hi mate, do the standard wheels fit over these without any additional spacers as there is already the 5mm in?

[@AlanYoungST225]

Am not a 100% sure on that you may just need spacers

[@yoelcortesperez3161]

great job !! The brake hoses to attach these calipers are the original focus mk2 or do you use the rs mk3?

[@AlanYoungST225]

Thanks.Hi there no you need the mk3 brake lines

[@Some1David]

Hello, so at the end rims will be 5mm more out because of 5mm spacer under disc? 🤔

[@AlanYoungST225]

yes that's right

[@schnell1304]

Would it fit with the standard brake lines of the ST225?

[@AlanYoungST225]

Hi there no you need the mk3 brake lines

[@AdamSmith-om6ky]

Would these callipers also fit a c30 t5 the same as the focus st225?

[@AlanYoungST225]

Hi there yes they would as they are the same hub.

[@budget666]

So I can install this exact kit on my 2009 Volvo C30 T5?! If so, any idea if they have the calibers in Red by now? Or blue and silver/gray are they only options? Either way, great video! Thanks a lot boys!!

[@jurgenvdberg5284]

What is the link for this set ? I can’t find it on the pumaspeedsite

[@AlanYoungST225]

pumaspeed.co.uk/product-Focus-RS-Mk3-Front-Brake-kit-Suits-ST250_17372.jsp

[@sarcasm86uk]

Do you have the link for the parts ? (Front and rear kit)

[@AlanYoungST225]

Hi there the only link I can find is collinsperformance.com/shop/ford/ford-performance-parts/rs-mk3-brake-upgrade-focus-mk2-st225/ hope this works

[@sarcasm86uk]

@@AlanYoungST225 thanks :)

[@paulsoames7980]

Does anyone know the millimetres of the spacer he uses to put behind the disc ?

[@filipbojkovic2217]

5 mm. But I don't understand why are they necessery?

[@paulsoames7980]

@@filipbojkovic2217 it spaces the disc out so it runs in the middle of the caliper