How did you connect, did you need to generate any code? I can connect but I can't read or write!

Hi please thanks for your knowledge sharing spirit , i would like you if you can help, me with dump immo off bin file for both flash and eeprom for my vw jetta fsi 2.0 model 2007, i do have error immobiizer adjustment, so on my PCMFlash module 71 it does not appear on my list?

the new dump of the new key is written in the eeprom or not?

Price?

Direct clone always works fine for me, never had to program a new key. Your original key can be faulty though.. Generate a chrysler y170 46 can chip with vvdi key tool using superchip and program into win module, use a regular non remote key to test with the ones that have a fobik type head on them ( no need to cut key because win does not have any wafers inside..

Hi mate. Original module have faults screen. Codes not stored in eeprom. Common win module problem. I have made clone to new module, original key works and car started and keyless works. Immo light has been steady on all the time..after 10 minutes car doesn't start again. Do I have to program brand new keys?

Please can you help me do immo off on a similar ecu me 9.1? Thanks

Write the Autohex ISN u discovered into the CAS

I gotta admit this video got a smile out of me lol

This was no crank no start all electronics where inoperable no ignition no nothing dash was completely off

Hi where did you get this obd adapter

How did you get the connection pin details.

Hello brother, with what software have you repaired the EPROM file?

🎉 you are the man bro

awesome video bro im facing a situation with a E92 ECM from a 2017 Camaro I was trying to clone it but my unlucky self ran accross an original ECM whose CAN LOW is bad so no way to read eeprom or FLASH from the original I reset the device using OBDSTAR DC706 and attempted to flash using SPS2 through TLC today but it FAILED with a communication error code because SPS detectED that the Donor ECM was not fully VIRGINIZED. CAN YOU PLEASE SUGGEST ME A WAY OUT PLEASE??

Thank you sir for the tremendous learning experience. i am getting into locksmithing and have a auction 2010 9-3 with all keys lost. this is one of the few videos out there proving what method works. thanks again! consider me subscribed!!

Hello friend where I can purchase THE I/O TERMINAL SOFTWARE AND TOOLS PLS THANKS

how did you get it out

Hey bro I tried different different methods with Autel but it’s doesn’t work at all I thought my connection or update issues , in some scenarios Autel it’s sucks even I tried to reprogram Mitsubishi pajero 2011 model it’s only gives me a single wrong PIN code I’m fed up with Autel..

Hello, from where did you got the repaired eeprom file for it

hey by doing this does it over ride the theft system

Ok. So in doing this, you MUST disconnect the skim unit, yes? Or it will just detect and assign a new code? This is my understanding. Removing the skim unit is preferred so it doesn't get plugged in again by mistake.... I've got a 2002 stratus and can not find the skim unit.

Thanks it helped a lot to find the module

Hey boss ! So that on bench harness comes with the 508? Or 608??? To conect on bench ?

Cant hear You, volume on your vid is gone?????

"Promo SM"

Can i open the vvdi2 program without vvdi2 device,i have ktag device and i read eeprom only need to write immo off

Great video !! Where can I buy that harness ??? I have to start doing it on bench ! Thanks

Perfect man, all i wantnitntonlnow

Right on man 👍 I’m watching this because I had the same thing happen on an AKL on an 06 CRV I’m going back today and I’m almost sure this is what it is. The scanner says “not normal” on the immo system. You rock thank you 🙏🏽

Thank you so much for the lovely video, much appreciated and hope for a lot of work to come your way

Pls help me out, I need your services . I need to clone my GMC terrain 2016 E39A Box. Pls assist me here.

Hello, can we clone a ecu for 2008 hummer H3 (ecu series E67)

Hello how much should I charge to clone a Gm computer Once I buy the IO terminal software

There ard so many o terminal prof too chose from which is the best too buy license, version etc? Thanks for your help

How can I get the information to send you a close to it? That I got from the checkyard to re do the security number

Has anyone done this using IM608?

Hi. Does this device have schematic diagram to connect ACDelco modules on bench mode? Thanks

Hello, am having safe shown on dash of VW Q7 4L. Original ECU was fried and the owner got a second hand ECU the car worked ok for a while but now it cranks no start, no spark. Do you think wrong immo file would do that? Thanks..

Hi. I’m back to say a huge thank you for helping me with immo off on a MED9.1.1 ÉCU from my 2010 Audi Q7 4.2FSI. It was not easy but we made it. To make it work we needed to write the eeprom, flash and MPC. Without that the engine couldn’t start. Thank you

Why ABS light is on? It has to do with a vin mismatch?

Do you have a problem with VVDI Prog software?

that is amazing, in australia ve holden commodore ( maybe vz also) use e39 ecu, I cant believe that is all is required to put in a secondhand ecu, mind blown.........i/o terminal a bit expensive, no doubt cheaper options to read/write flash/eeprom data.

Does kit come with programmer and all cables for $5000?

Where is the best place to purchase this? My concern it is a china based company and forking out $5k there is no recourse if they pull the plug on this in 6 months. I bought a x431 pro 5 smartbox scanner made by launch that has j2534 which buy the way does not work and they warranteed it for 5 years. I only biught 4 months ago and they refuse to honor warranty. I have ne recourse other than try to sue them as they are china company selling on ebay. $1400 and a 5 year warranty that is usless. Ebay allows this and only cover it for 30 days after that your screwed.

Could you please give me pin out for same bcm

Is there any way you could program my ecm

Is there any reason why you can't just take the full backup from the original module and restore to the donor? Or is it necessary to individually write the p-flash ex-flash and ex-eeprom to the donor for this me9.7 module?

Hi can this tool do 2019 ford bcm?

Tendra diagramas para pinear vcm de chevrolet tengo io terminal y los tengo