Just Jani

Пікірлер

@JosephEaton-i8m 3 сағат бұрын

Do the attachments that are needed come with the Arbor press. Oops, I spoke too soon 😂

@JosephEaton-i8m 4 сағат бұрын

Hahahaha 😅 next step “remove the cat”!!

@JustJani 4 сағат бұрын

😂Yup!

@jodylynch1492 17 сағат бұрын

Where did you get your arbor press thank you

@jodylynch1492 19 сағат бұрын

What did you use to wrap that around

@jodylynch1492 19 сағат бұрын

Have you ever made anything by using big forks and spoons

@jodylynch1492 23 сағат бұрын

Think I'm going to give that a try first time doing this

@JustJani 20 сағат бұрын

Awesome! I know you’ll have fun with it!

@jodylynch1492 19 сағат бұрын

Know what to do with those old silverware thank you and show more

@4nbop80user Күн бұрын

Whow. Reality check. ‘Use your .22 shells…’. European here. Never seen ammo other than in my youth on an exercise ground of an army base. I’m retired…

@JustJani 19 сағат бұрын

😂 I never thought of people not having spent shells lying around!

@garywelsh1186 2 күн бұрын

You have very strong hands and really nice technique!

@JustJani 19 сағат бұрын

Thank you so much!😊

@josepheaton5087 5 күн бұрын

Does this let off any unsafe fumes? I would like to do this in my warm basement, my garage shop gets to cold in these winter months

@JustJani 5 күн бұрын

Hi! Ideally you’d want to be in a ventilated area. Acetylene is lighter than air and will just hang around and eat oxygen (not leaving as much air for you). And you wouldn’t know bc it’s odorless. Since you don’t need it on very long at a time for these projects you could work by a window or fan.

@josepheaton5087 5 күн бұрын

@ thank you, just trying to keep safe 😊! Also, I want to extend my appreciation for the quick response

@JustJani 5 күн бұрын

You’re welcome. Happy bending!😃

@johnsavage3506 10 күн бұрын

I was following along fine thinking I could do that. Then you brought in your bending press! Is there a way of finishing this off without an expensive press?

@hawkwolfheart 10 күн бұрын

Love your creations. Where are those presses and nylon/drelin dia's available from, thanks.

@clcarlton 15 күн бұрын

How do you remove the handkes from stainless steel knives?

@JustJani 15 күн бұрын

You can cut them off with a band saw or hand saw. They’re not hollow so you can’t do it the same as the silver plated.

@ecmello94 15 күн бұрын

So clever

@justinvanburen8259 21 күн бұрын

Great work!!

@JustJani 20 күн бұрын

Thank you!

@20melon20 Ай бұрын

Thanks very inspiring 😸 the bloopers is why I can't let my boa constrictor on my bench when I work 😅

@JustJani 20 күн бұрын

😳😂

@melony410 Ай бұрын

@justjani what kind of metal is the fork?

@JustJani Ай бұрын

Hi! All of my silverware is silver plated.

@dirtyjohnathan5612 Ай бұрын

I know this is two years old but for anyone who may have found this video. DONT DO THIS. you’re removing the silver plate left. Exposing the bare metal underneath. What you’re seeing is the bare metal. Remember plating is just applying a thin coat of a material ontop of another. A file will obviously remove the silver plate. DONT DO THIS

@Prashantborse1992 Ай бұрын

From Where to get it

@JustJani Ай бұрын

You can get them on Amazon. a.co/d/2TnLEa9

@Keith-rk4td Ай бұрын

Are these forks sterling or plate?Or maybe stainless?

@doneast4885 2 ай бұрын

Stupid fir plating

@santinobanzato1243 2 ай бұрын

hi just jani can you advise me where to find delrin blocks and metal pins

@JustJani 2 ай бұрын

Hi, What you’re looking for is called a Bender Press Kit. They’re designed and sold by Flatwearable Artisan Jewelry. They sell both new and used. The kit attaches to a one ton arbor press that you buy separately. Let me know if there’s anything else I can help you with. Here are the links: flatwearable.com/product/flatwearable-bender-press-classic-v2a/ www.harborfreight.com/1-ton-arbor-press-59766.html?campaignid=425661431&adsetid=1155588618286049&product=59766&store=195

@barbara8707 2 ай бұрын

Looks good!

@russelldowne8625 2 ай бұрын

How donu choose what dye to use as I seen someone make a size 7 ring and one used a 16 dye the other used a 20 dye

@faustingstein 2 ай бұрын

You make an awesome design.

@JustJani 2 ай бұрын

Thank you!

@faustingstein 2 ай бұрын

You made it very clear and informative Thank you so much for showing how it's done.

@JustJani 2 ай бұрын

You're welcome!

@GlassmakerRN 2 ай бұрын

Why don’t you drill the heart before you bend it?

@JustJani 2 ай бұрын

If you drill the hole first and then bend it, the hole will spread open and your hanger or rivet won't fit correctly. Hope this helps!

@GlassmakerRN 2 ай бұрын

@@JustJani OK, that makes sense

@mysight4kurt 3 ай бұрын

Thank you very much for your idea❤

@JustJani 2 ай бұрын

You're very welcome!

@jerrysmith4934 3 ай бұрын

Where can i get the attachments for the arbor press?

@JustJani 2 ай бұрын

Sorry, I just saw this. The attachments are called a Bender Press from Flatwearable Artisan Jewelry. She designed and sells them. You can get new or used on her website. flatwearable.com/product/flatwearable-bender-press-classic-v2a/

@terrydiamond4571 3 ай бұрын

You didn't mention what type of hammer. Was it rawhide, metal?

@JustJani 2 ай бұрын

Sorry, I just saw this. Yes, it is a rawhide hammer. A steel hammer would make marks/dents on the silverware.

@hephaistos466 3 ай бұрын

Uau

@hephaistos466 3 ай бұрын

Uau

@espytpro 4 ай бұрын

Cat video bomb 8:03 😂😂

@JustJani 4 ай бұрын

😂🤦🏼‍♀️

@ana-mariacostea44 4 ай бұрын

FELICITĂRI, foarte frumos ceea ce a-ți făcut

@rue5732 4 ай бұрын

Hi, what is that Torch Tool called you use? And where do you get one?

@JustJani 2 ай бұрын

I'm so sorry I missed your comment. Here are links to my torch pieces. I never change my tips. I like the smaller one for what I do. Torch handle: a.co/d/6jtMUfG Torch tip: a.co/d/bPZmyAQ Torch tip: a.co/d/17fkFPt I didn't buy a hose. My husband did HVAC and had an oxy-acetylene hose that he separated so I just had the acetylene hose. My gas is a small cylinder of acetylene I get filled at a local store. I don't need oxygen because the torch pulls oxygen in from around it. Here is a video by Goss that explains how it works. kzbin.info/www/bejne/e2Slk6Z9bNimaMUsi=fTPLdG-HpLNvwdtV I don't have this one below. I bought my pieces separately, but if you don't have anything the kit is a good place to start. www.gossonline.com/air-acetylene-equipment/kits/feather-flame-kits-screw-in-style

@ПолинаБазарова-с8о 5 ай бұрын

Amazing!! ❤ thank you for the video

@paulanovelli258 5 ай бұрын

OMG my toes are curling and my teeth hurt. WTF is wrong with me? Metal on metal. Argh

@JustJani 5 ай бұрын

😂

@Strigoiette 5 ай бұрын

What size would you say this one is....a medium? Or small? Do you label them different sizes

@kimlyons8550 5 ай бұрын

Thanks for all the steps. Were your pieces, sterling, plated or stainless?

@JustJani 5 ай бұрын

Hi, Mine are silver plated in all of my videos.

@LuckSpinner 6 ай бұрын

Love happy cats and cool rings! This is is such a cool design! 💍

@JustJani 6 ай бұрын

😃Thank you!

@jenniferpeterson3615 6 ай бұрын

OMG! So happy to watch & learn ur tips!! Have a suitcase of FORK! 😂😂

@JustJani 6 ай бұрын

Awesome!🤩

@williamdick1615 6 ай бұрын

Where do you get a press like that?

@JustJani 6 ай бұрын

Hi there, There are two parts to it. There is a Bender Press Kit and an Arbor press. The Bender Press kit is from Flatwearable Artisan Jewelry. You can get both new and used. flatwearable.com/product/flatwearable-bender-press-classic-v2a/ The Arbor press is from Harbor Freight. www.harborfreight.com/1-ton-arbor-press-59766.html

@timothyhails359 6 ай бұрын

That's really well annealed 👍

@phillight2008 6 ай бұрын

It doesn't "look silver;" it just looks shiny. If you polish copper or brass to a mirror finish, it's hard to see the metal's color because it's so reflective. But you've removed any remnant of silver plate with that file. This is a destructive cosmetic technique and damages the piece. Replating is the only way to restore it.

@JustJani 6 ай бұрын

You should make a video on that.

@phillight2008 6 ай бұрын

@@JustJani, I only create videos about topics I'm knowledgeable about. I don't know how to replate silver. I was searching for that knowledge when I came across this video.

@amacc1 7 ай бұрын

maybe a steel ball to be able to press it rounder and not risk the glass? love your videos!

@JustJani 6 ай бұрын

Good idea!

@chrisputnam4616 7 ай бұрын

What is that white stuff i side and how to get it out ....i reuse the handles

@JustJani 7 ай бұрын

Hi! It depends on who made the knife and how old it is. Some have pitch, some have plaster, etc.. Here is a video I did on it. Hope it helps. kzbin.info/www/bejne/gHnakJ-Gf751nposi=c9WbE0ISxkS1RMxP

@RickaramaTrama-lc1ys 7 ай бұрын

Great Job showing us NewBees how to bend these forks and I really needed the education and I am also a Cat Lover and got a kick out of Chica trying to see what you were doing and talking to no one she could see~!! I liked and subscribed.

@JustJani 7 ай бұрын

Thank you so much!

@Chellybelly_813 7 ай бұрын

What material are they? I can’t find sterling or silver plated? Most I see is stainless steel, is that okay

@JustJani 6 ай бұрын

Hi, Yes, you can use stainless, it's just harder to bend. You have to anneal it first. I get my silver plate from thrift stores, antique shops, garage sales, and facebook markeplace.

@Chellybelly_813 6 ай бұрын

@@JustJani thank u I have been to 3 thrift stores and not much there!! Will keep looking

@kathyvantrease2804 8 ай бұрын

What did you cut with?

@JustJani 7 ай бұрын

Hi, I have a mini band saw. You can also use a regular band saw or hacksaw if you have a smaller toothed blade on it.

@robertwaddell7532 8 ай бұрын

💦. 🐳. Awesome ! Ty ☕️

@JustJani 8 ай бұрын

Thank you!

@laurielahr1022 8 ай бұрын

Beautiful ring, may I ask for hints on how you find sterling silverware? I'm having the hardest time!

@JustJani 8 ай бұрын

Hi, I go to antique stores and thrift shops.

Ең жақсы KZbin

Пікірлер