wolfeman1966

Пікірлер

@njrepresent200 7 күн бұрын

Will overfilling trigger the warning light?

@janicekovacevic4646 21 күн бұрын

I cant get the cap back on. Ugh. Patience, I’ll keep working at it.

@wolfeman1966 20 күн бұрын

I feel you, it's a little fiddly at first. 👍😂 But patience is a virtue 🤔

@billjohnston4671 22 күн бұрын

enjoying your insight and help ty

@wolfeman1966 22 күн бұрын

Hope it works out for you as it did for me 👍🏽😊

@alphasquad4464 Ай бұрын

This is fucking retarded i though u fix the fucking thing 😂😂😂

@stubbzstw Ай бұрын

Holy hell, I never knew my tractor was supposed to show the mph. Great video, I’ve been rocking this code for quite some time.

@wolfeman1966 Ай бұрын

I was the same. Took me 6 months or more to repair the fault.😂 That’s when I realized 👍🏽

@christopherguinn9966 2 ай бұрын

Looks like it would be accessable from the opening in the bottom. I think I'd rather lay it back and go in through there than take the machine all apart.

@wolfeman1966 2 ай бұрын

@@christopherguinn9966 best of luck there then. If you manage to do that I would love to know how..???

@WeNeed2TlkTv 3 ай бұрын

Thanks!... Here in 2024

@wolfeman1966 3 ай бұрын

@@WeNeed2TlkTv thanks for your response 👍🏽👍🏽

@WeNeed2TlkTv 3 ай бұрын

@@wolfeman1966 My Vizio D55U-D1 won't come on at all... I took the back off, unsure which board I should replace... My neighbor gave me the TV.

@mountainclimber110 3 ай бұрын

you absolutely do not need to remove the engine crank pulley to get the belt on.. spin it while the deck tensioner is full out.. A lot of DIYers are going to eff there mowers up doing this

@wolfeman1966 3 ай бұрын

Thanks for your input 👍🏽

@fabianoswaldo7 3 ай бұрын

modelo de Pila N. 364 para cambiar

@wolfeman1966 3 ай бұрын

Correct 👍🏽

@angieliquebuatis1065 3 ай бұрын

I have this same tv vizio the screen is black. Im from in the philippines Whre can i buy?

@wolfeman1966 3 ай бұрын

I give the name of the company in my video. I’m not affiliated with them but they do supply

@RobertAnderson-h9t 4 ай бұрын

Thanks man it helped a lot man so thanks

@wolfeman1966 4 ай бұрын

You’re so welcome, 👍🏽👍🏽

@garryowenhound5962 4 ай бұрын

Nicely done! This was a great help and particularly useful to know about the necessary "wubble" as part of the process.

@wolfeman1966 4 ай бұрын

Glad it was helpful! 👍🏽👍🏽

@andrez3640 4 ай бұрын

Interestingly my fossil actually has a sticker inside the cover telling you to reset after battery replacement.

@wolfeman1966 4 ай бұрын

Wow that’s interesting 🤔

@BoHannon-kx6kb 4 ай бұрын

Thank you so much for taking your time to make a video Sir. Im hoping this will help me.

@wolfeman1966 4 ай бұрын

Glad it helped👍🏽

@randomthoughtstoday 5 ай бұрын

Hey mate, great video! I had a filling that came out. Molar in the back. Need to get root canal but for now, i'm going to use this product!

@wolfeman1966 5 ай бұрын

Great 👍🏽 I have since had my tooth sorted. But I always have a pack in my cabinet…. Just in case. Thanks for your comment 👍🏽

@robertcoffey1636 6 ай бұрын

Dose the bigger battery make the light brighter?

@wolfeman1966 6 ай бұрын

No just makes it last longer 👍🏽💡

@robertcoffey1636 6 ай бұрын

Ok thanks!

@Mindful411 6 ай бұрын

@wolfeman1966 6 ай бұрын

😂

@juleyfarley2877 6 ай бұрын

I 've had to prime the same tractor once before when I ran it out of diesel and after a lot of time and perhaps some tears I got it, and swore I'd never let that happen again and haven't! He changed out the fuel filter due to it being old and cracked and was leaking and has been trying to get it started for over an hour. I could not remember for sure how to prime it, but as soon as I watched you get it started it all came back to me. I walked out there, grabbed the screw driver opened it up and pumped it a few times. Closed it, pumped it about 15 times and tried to start it. Pumped it a couple times while cranking it and it started right up. I thought he was gonna fall over! It was AWESOME! Thanks for making this video and for making me a bad ass! LOL...I'm sure all his failed attempts helped but I'm not telling him.

@wolfeman1966 6 ай бұрын

😂you go girl. Education is the best. Well done for wanting to learn. 👍🏽👍🏽

@heathalford4721 6 ай бұрын

I usually break the injector lines to see that the diesel has made it there and let the air out of the line. But this seemed to work out without all that

@wolfeman1966 6 ай бұрын

That interesting 🤔 I glad it worked for you👍🏽

@WilliamNast-v1g 6 ай бұрын

THANKS SO MUCH!!! IT WORKED!!!

@wolfeman1966 6 ай бұрын

Glad it helped!👍🏽👍🏽

@g.w.gandi17 7 ай бұрын

Thank you sir, it's helpful and now i can change my strap every time 🎉

@g.w.gandi17 7 ай бұрын

Maybe some note, the direction when you lose the pin between left and right is different. One is like your video, and the other is the opposite face. To see the details, the pin face is like "u" and others are flat. Knock the flat face to open it

@wolfeman1966 7 ай бұрын

Many thanks 👍🏽

@twoweeledsoto6072 7 ай бұрын

What day is this? 😅

@wolfeman1966 7 ай бұрын

4 years ago. But my flashlight/ torchlight is still working and going strong 👍🏽

@918swimbikerun 7 ай бұрын

What is the problem if it turns on shows Vizio then turns off?

@wolfeman1966 7 ай бұрын

Main board, something…. Resister, pot is overheating and shutting down. Damaged. It starts whilst cold, warms up and can’t cope… then shut down due to heat. Replace the main board 👍🏽

@KenneySnipes-fv5uh 7 ай бұрын

Have this error code 6 problem and have replaced the sensor several times and still comes on.... plug wires are good now where do i look???? The sensor is good . is there more than one sensor on this ssystem?

@wolfeman1966 7 ай бұрын

Try disconnecting the battery whilst you change out the sensor. This may reset the board and when you connect the sensor … power back up and it should read it as a new sensor. Did you buy a new sensor or is it an old one that you believe is good?🤔

@RandomsFandom 7 ай бұрын

Just stop working dummy. Screw the job, protect the equipment. Even if it's a rental, you'll never get a call back. They are ashamed for you. They are ashamed they hired a dummy.

@RandomsFandom 7 ай бұрын

Lower the throttle before and after use.

@mikeleblanc6300 8 ай бұрын

did u end up changing the whole thing? i'm looking for just the spring & cap that was inside of it. any idea where i can just get those? mine dropped under the manifold, no way i'm taking it all apart just for those, lol

@wolfeman1966 8 ай бұрын

Yes I did, maybe you could go to a scrap yard and see if you can pick one up… or go to a auto parts , buy the full part then take it back minus the spring, saying it’s not the part you needed..😂👍🏽

@caraddicts728 8 ай бұрын

Mine goes up amd down but battery light comes on

@wolfeman1966 8 ай бұрын

Have you checked your battery terminals ( cables and battery )

@caraddicts728 8 ай бұрын

@@wolfeman1966 yes coukd it be bad injectors

@caraddicts728 8 ай бұрын

@@wolfeman1966 changed battery i was thinking bas injectors i dont know will be cleaning the unjevtors td

@lesjones5684 8 ай бұрын

You are a joke 😂😂

@wolfeman1966 8 ай бұрын

I appreciate your feedback. Do you think I should have my own stand up show 😁👍🏽

@sheepdog-kp9hb 9 ай бұрын

Thanks

@wolfeman1966 9 ай бұрын

Your welcome 👍🏽

@WhiteWizard420 9 ай бұрын

Hey, I appreciate your long winded Ness 😂 I am the same way! Figure it out. If you ain't even been on the struggle bus, how would you know when the bus runs out of gas? We need to know our equipment just like we need to know how to tie our shoes. Unless your a bloke that was raised and still wears Velcro or slipons all day. Maybe you sit-down to pee as well? (No offense ladies) good video!

@wolfeman1966 9 ай бұрын

😂 you were right, you are long winded 😂👍🏽

@maxnuccio2440 10 ай бұрын

6 screws on the box for anyone wondering. Tend to rust. Good to pick out the screw driver bit slot of any rust and make sure the driver fits in there and doesn't strip the head. Make sure you don't lose your air filter box gasket either!

@wolfeman1966 10 ай бұрын

Thanks for the info 👍🏽👍🏽

@creativeirrigationlighting941 10 ай бұрын

Thank you from across the pond!! Very helpful!

@wolfeman1966 10 ай бұрын

Glad to be of assistance 🇬🇧👍🏽

@mikeprescott6485 10 ай бұрын

Thanks buddy! 😊

@wolfeman1966 10 ай бұрын

Glad it helped 👍🏽

@mmarczuk1976 11 ай бұрын

glad found this thread seems like a total dumpster fire on wheels. 😂😂😂

@wolfeman1966 11 ай бұрын

Could be right, but when you have nothing else and require a power source, then needs must 👍🏽

@trentreynolds9095 11 ай бұрын

What if the screen works but just has darker spots in areas

@wolfeman1966 11 ай бұрын

Fantastic. Hope it’s not to cold 🥶

@Gavinwatson.17 11 ай бұрын

Thank you for explaining it so good, I just did an oil change yesterday on my ski and filled it up to the full line, and after being on the water for about 45 minutes it started spitting oil out of the breather hose

@wolfeman1966 11 ай бұрын

Oh no😮 Use a flexible tube and suck the excess out. It will send oil into the air filter box front of the engine. You may have to clean that out😬 Best of luck 🤞🏽 👍🏽👍🏽

@Gavinwatson.17 11 ай бұрын

@@wolfeman1966 thank you yes I just got finished cleaning the air box and getting the oil where it needs to be, I’ll take it out this weekend and hopefully all is good

@wolfeman1966 11 ай бұрын

Can you describe what happens and when, plus year and model of your vehicle 🚗 👍🏽

@howardjustin08 11 ай бұрын

Thank you sir! I'm trying this tomorrow.

@wolfeman1966 11 ай бұрын

Best of luck! Let me know if that solves your issue 👍🏽

@howardjustin08 11 ай бұрын

@@wolfeman1966 update! I tried it but it doesn't fix the problem..still cuts out if I'm sitting at a light. I might have a problem with the coil packs or something else.

@ultratuber6332 Жыл бұрын

Bro thank you so much for this video, I have two 11th gen 4.6s and they both had had this problem cutting out at low speed turns and shaking very hard at idle. Thank you for explaining the why and how of the problem and helping me understand what’s actually causing it. Cheers🔥

@wolfeman1966 Жыл бұрын

Thank you for letting me know. I glad it helped. Sometimes watching these pro. Explain things just flies over our heads as they make it out as if we should know steps…1,2 &3 then skip to the final finishing steps. Good luck and enjoy 👍🏽

@rameshkv2759 Жыл бұрын

E.5 errors single. What is Problems.

@davidc6666 Жыл бұрын

Didn't hear the starter solenoid kick over. I would have started there.

@wolfeman1966 Жыл бұрын

I understand it’s 4 years old, but it’s the same concept… hot water softens any plastic. This then allows you to manipulate it…. Ie pri the lid off 👍🏽

@phonofolks8032 Жыл бұрын

This method doesn't work no matter how many times I tried. Maybe the manufacturer changed the design recently?

@wolfeman1966 Жыл бұрын

😢 if it’s the same product it should work 😳 Maybe your water isn’t hot enough 🤔👍🏽

@phonofolks8032 Жыл бұрын

@@wolfeman1966 I boiled water, used the hair drier and all I got was stressed red hurting hands.

@phonofolks8032 Жыл бұрын

@@wolfeman1966your video is 4 years old too so the product may have changed. Other postings also said it can't be done unless you use a knife to pry off the cap which chips the glass or heat your oven to 250°F and place the grinder in the oven for 10 minutes then pry off the plastic lid.

@aroncahill2219 Жыл бұрын

What year is your tractor? Any idea if its a common rail or mechanical fuel pump?

@JetwashF8TheHuntingGamer Жыл бұрын

looks to me like they were accidentally put on upside down and the highlift portion of the blade was doing the cutting

@wolfeman1966 Жыл бұрын

I just think it was the type of grass I was cutting.the back field would get up to 3’ at times and I would need to slowly cut through it. I did however change where I bought the blades and have not seen this happen again. Thanks for your comment 👍🏽

@petertlusty3343 Жыл бұрын

2023 Update Despite being a Big De Walt customer they were totally disinterested in sorting this problem out ! Put me through to an agent in Reading who said BUY A NEW ONE ! Great customer service i don't think !

@wolfeman1966 Жыл бұрын

Wow… I always give them loads of respect when I know I’m actually after something for free.😂 Try again and put the British charm on. It’s always worth another go. Let me know what happens 🤞🏽🤞🏽👍🏽

@johnbarney5787 Жыл бұрын

Great video. I have the exact same pump with the exact same problem. I found your video after I fixed it. BUT, it did show me that I didn't have to completely remove the carb. My problem and question that I was researching when I found your video is now that it runs, it bogs down greatly when water pump comes on. I've treated pump with Stabil pump protectant. Also, my motor now runs now at breakneck super sonic RPM's just to keep up. Speeds way above norm.

@wolfeman1966 Жыл бұрын

If your question is why is it running super sonic..!?? That could be that you have lost something to govern it down like the fine nozzle that goes inside the threaded valve area at the bottom or the hand held gun?!!

@denisereid7561 Жыл бұрын

Hiii do you know by any chance how to get into a JR 1076 fossil watch to change battery??

@wolfeman1966 Жыл бұрын

I believe it should be the same way. If it’s got little divots around the back plate. Then it’s a twist off.🤞🏽 Hope that helps 👍🏽👍🏽

Ең жақсы KZbin

Пікірлер