Is there a video on replacing the control board?

Quality workmanship !

Nice video !

I have a he profile range circ 2013. Range main oven works ,burner indicator light come on but all burner’s will not work. It is a double oven range , the Lower oven not working Do I need a new circuit board?

How do I replace the light bulb that's out?

Do you have information where you can send the CPC4 for in for repair

Whirlpool GMC305PRs00 only heats up to 240ish when set to bake at 350. Top element when on broil turns red hot, bottom element gets hot on bake but not red hot. Temp sensor checked out along with elements...no codes. Control Board? Thanks

How the heck do you get the bottom 5mm allen head bolts?

Can the board completely shut off the oven? Nothing turns on, lights inside the oven when opening the doors etc. Almost seems like a breaker went out but power is coming to the oven and board is receiving power as well.

I have an older Whirlpool wall oven microwave combo (model GMC305PDS07) that isn't working. In the beginning the display panel went dark and the oven stopped working while the microwave oven continued working but without a display. Then without doing anything the panel lit back up and the oven worked again. This intermittent issue continued to happen, on and off. The display and oven hasn't worked now for several weeks. I had a repair service come the other day and the service tech diagnosed the oven and told me it needed a new CCA part # WP8301848. By the next day the company sent me an estimate to repair the oven and added a PCB/Rebuild (part # 8302153) which the way I understand is the entire display panel? They said the part was discontinued and would have to be rebuilt. My problem is, this isn't what the tech told me. He understood that if I purchased the CCA part I was considering installing the part myself. I don't understand why the technician told me what the problem is, only to have their office tell me something different. He inspected the oven and told me what needs replaced after testing the panel, then his office says I need a new panel without ever seeing the oven. I think they are trying to pull the wool over on me. Does any of this make sense to you? I want to buy the part and put it in myself and the tech helped me by giving me the part number, etc. I know I can't take the part back if it doesn't work but from what their tech told me, that should fix the problem. What do you think? I'm not sure what to do.

Can you repair the speedometer itself? Mine won't goto zero, and is 7 or 8 miles off compared to digital

Will a 2014 cluster for fit a 2019 classic? If so how much to program it for me?

What type of grease can I use to grease the sector gear?

All the way From California. Thank you very Much! Going on 2 weeks with my CPC4 fixed by you guys and all is good.

I don’t have problems with heating but I can barely see the what temperature it is. I have to cover my head with something to block out light, and look at it within 6 inches. Same for the rest of our family. It’s like half power to the display. It been happening for 10 years now. What can it be since there is definitely some power going to the control and it’s heating just fine?

My digital part of the dash went out (2013 ram Laramie longhorn), but all analog gauges work just fine. Is this a sign that I need to get a whole new cluster like you pulled out or should I be looking for something simple like a fuse blown or something?

Do you sell used one's , and how much?

Do you have repaired modules for sale that other customers may have not paid for?

if I'm just replacing the gaskets on the actuator do i need to get it calibrated? no codes just a small coolant leak

Thank u!

What's the warranty for the repair

I am looking forward to working with them on my oven. Circuit Board medics helped me several years ago with my washing machine board and it is still going strong.

When is payment required? Before or after repair. If it cannot be repaired, is there a charge?

What about a ram 2021 is the install different and the callibration

Will the CPC need to be reflashed (at the dealer) after it’s returned, or is the current programming saved and all I’d need to do is plug it back in and ride?

Just replaced my actuator and calibrated that I got from you guys. I’m still getting the U010C code. I’ve cleared the code on my little tool but the engine light doesn’t go off and when I reread the codes…it pops up again. The truck runs better but I’m concerned. Any suggestions??? Or how can I clear a Hard code perhaps?

How much

Para una traducción al español de este video: kzbin.info/www/bejne/fXukpICaoraYY7c

Cute guy

What happens if i dont calibrate my actuator on my 2010 6.7

Just ended up having to do this on my truck... ordered circuit board mechanics turbo actuator and relearn controller. Video is very helpful and parts are oem rebuilt. Happy to finally have exhaust brake back and be boosting over 40lbs again.

Cute guy

Hi, I have a 10 year old GE Cafe wall oven and I get error message F9 when I set temp to 450 or 500

Hint for anyone doing this: start and run the truck to opperateing temp after install and before you put the fenderliner back in to check for leaks

How much to repair 2013 avenger water intrusion lost blower motor wiper motor. And horn

I got several cracks on the lens, can I just replace the plastic lens or do I have to replace the whole cluster assembly ?

ge double wall oven 35yrs old. # jkp44gop2ba model black screen and or turns off before temp is reached.

Thank you SO much for making this video. My actuator just this morning decided it didnt want to play anymore and I was freaking out about what to do. Found ya'lls site for the reman and this video and I feel so much better about doing this myself. Dealer wants to swap a new turbo for $6k!! No thank you!

Do the TIPMS need to be programmed or can I swap one from another vehicle? It's for an 07 charger..

This was an excellent resource, from start to finish, and it really did only take about half an hour! Thank you for posting!

got all working by cleaning ribbon end but now cant turn oven off on clear/off button... any suggestions?

I have an older electric GE drop in range with coils that I'm struggling to figure out how to remove the front panel. I've watched a lot of videos but my range doesn't seem to have screws in the same places. I've removed several from under the cook top but it's not budging. Could be years of gunk holding it but I'm afraid to use force and damage it if there are actually screws still in place that I'm missing. My range looks almost identical to the new GE JD630DFBB, with the exception mine isn't a glass top. You wouldn't by chance have a video for one like mine?

Outstanding!! I'm a Hellcat guy, but had a chance to then get a 2018 RAM 3500 Cummins G56 new off the lot in August 2018. I knew nothing of diesels, but have tried to learn since then. I always wondered how the actuator was "clocked" or calibrated when installed. Thanks so much!!! If I could give this video 10 likes, I would!

Why did you drain the coolant from the system prior to pulling the actuator?

Great work Tim!

Hi, I have GE pt7050sf1ss. It has error code F34, do you know what is wrong with?

Thanks for the helpful info about the 2012 Grand Caravan.