I have a 2003 E46 318i with the N42 drinking oil like crazy and positive oil lid preassure.
@markwyatt9847 Жыл бұрын
Did your servo have oil in it aswell?
@aaronbligh3619 Жыл бұрын
Thanks for this video bro, I did my pump seals yesterday and I followed this step by step. My brake pedal is better it's doesn't sink now when I come to a stop . Also no more oil smell as soon as the exhaust heats up and I'm hoping the oil consumption slows down a bit. I think my next job is valve seals once I e collected all the tools I need.
@TelstarTAK Жыл бұрын
hi there. what sealant did you use and did you only apply to the inner large O ring gasket? thanks.
@shaheedpetersen62312 жыл бұрын
Hi. Tried following the guide but pump is stuck. It does not want to slide out. I even removed the entire tapper cover and losses the 2 bolts on the pump housing . Still jamed tight. What could ot be?
@fmmsss2 жыл бұрын
After the vacuum change you need to change the tulumb of brake as well, because all the oil goes there, i change the vacuum pump and still no brakes.
@arkadiuszkarwacki48432 жыл бұрын
Hi all, I’ve done similiar replacemnt of the both o-rings seals of the vacuum pump (BMW e90 330d). After sealing with the proper o-rings there were no leaks of the oil. BUT right after the replacement problems with braking occurred (hard pedal after braking 3 times). There’s some issue with the sub-pressure. What is funny (If I may use such word for this s**t) that after using the old o-rings, everything went back to the previous condition (leaking of the oil but normal braking). Can anybody give me any clue or hint? What can cause such strange condition? Thanks in advance…
@igorstetsiuk68502 жыл бұрын
Hi, did you fix you problem? What was the problem?
@Javier3RM3 ай бұрын
I have the same problem. Did you solved it?
@arkadiuszkarwacki48433 ай бұрын
Yes, but i had to replace whole pump. Bought the used one for some little money and checked the subpressure with manometer to avoid crash-like situation on road. So, in ma case o ring replacement was a bad choice. Probably the inner side of the case was deformed and could normally operate only with old orings with specific torque of screws etc. So, replace the pump.
@drugbustin2 жыл бұрын
Hi, i replaced my vacuum pump on my 320d e46 ...but now it cranks and don't start...could the system get air locked in any way ?
@deanagius4202 жыл бұрын
Is there a vaccuum pump on a manual ?
@JakobAungiers2 жыл бұрын
Yes, this was a manual transmission
@Mathes481492 жыл бұрын
AWESOME :-))))
@Bokgat2 жыл бұрын
Question is, if 50 steps feed into 1 sample, and the result of the sample which is y predicted - y actual for observation 51, coming back to the noisy indian's first question, what is feed into the input neuron? Y - Y predict? If so, how are we then accounting for feature2 = X2 (eg opening price), feature3 = X3 (eg volume) etc? Really appreciate any answer here, this is still confusing to me. 2nd question, I get it that a batch is defined by the number of set's of say 50 observations (AKA samples), but how are these chained to each other through each epoch run. My understanding is that each batch is 1 complete neuro-net, so how are they linked up?
@freeflycoffey3 жыл бұрын
Nice x
@chrisjfox87153 жыл бұрын
At 16:39, I am unclear on what is meant by "Shift sequence window to remove 0th element and push predicted value as nth element." Is this just saying that the window is slid forward 1 point and now includes the predicted value? Which I understand the concept of, but... I'm picturing, and the math works out such that, the 100 windows of size 50 each would go "perfectly" into the 5001 datapoints with no overlap. Pushing each size 50 window only 1 datapoint at a time would introduce overlap (intentionally so, I would believe) and result in far more than 100 windows. What am I missing?
@530Cadet3 жыл бұрын
Great job, try turning down the vol though
@witciu123 жыл бұрын
jakim kluczem odkrecamy pompe ?
@emilakhmedov96682 жыл бұрын
10mm a same obudowe torx 25
@burakasiliskender3 жыл бұрын
Valve stems cause a lot of oil leaks or burning? Suspect with that?
@GeronimoAlbornoz3 жыл бұрын
Thank you jakob! Are there any advances that you see in the state of the art since this presentation? More than Four years of experience, pretty cool!! Good for you
@JakobAungiers3 жыл бұрын
Absolutely, 4 years on and the state of the art models have evolved past LSTMs to attention base models, and recently compressive transformation models. That's not to say LSTMs aren't still useful ;)
@5kulk3r733 жыл бұрын
*sigh* Seems completely detached from reality. What is 0.15 to -0.15 y axis and 0 to 450 x axis? First rule of doing any type of scientific work in this domain is to label your graphs - not done. Second thing is why is the prediction overlapped why isn't it _actually_ predicting a price or prices. This is completely useless. There are these huge blind spots with these developers... can't they just complete the work instead of leaving these various parts ambiguous. You go through all that work (?) and then have this poor presentation? It's really like they don't have a rigorous grasp of the materials.
@danielsanmartinsepulveda55383 жыл бұрын
que graaaaaande Asfura.....prooooooo
@lighttheoryllc43373 жыл бұрын
Turn off the Overhead Lights for goodness sakes
@LeeneshSingh3 жыл бұрын
I made the mistake of forgetting the rags stuffed down the back of the engine to catch anything falling. Rags caught fire as I was driving.
@itzarun83203 жыл бұрын
How is your eyes now buddy !!
@ramanax13 жыл бұрын
Love it 💖
@hollypaige143 жыл бұрын
Glad it went well for you and I hope the results are still good. I’m in New Zealand and had the SMILE procedure on Monday (four days go). It’s only been a few days since I had it and I’m so stoked that I got it done! I was -7.25 and -7.00 and the next day at my post op appointment I had 6/6 (20/20) vision and was cleared for driving. Earlier in the year I went skydiving for the first time, so I’m looking forward to trying it again without any contact lenses!
@JakobAungiers3 жыл бұрын
Amazing! Congrats on taking the plunge and enjoy the skydiving with new eyes!
@upadisetty3 жыл бұрын
Any post operative problems?
@JakobAungiers3 жыл бұрын
None what so ever. It's been over 3 years now and I'm still extremely happy with it!
@josepeixoto33843 жыл бұрын
defective and out of sight!! nice design...avoid , avoid.
@sz85583 жыл бұрын
Great presentation.....unfortunate that participants couldnt just shut up and take it all in.
@Traumassa4 жыл бұрын
Did the car too make "rattle" noise 1-2 sec, when you cold start the engine?
@mundex125bieszczady4 жыл бұрын
Do you know what is size of rubber seals?
@ryhu56424 жыл бұрын
Is that an oil catch can I see. And if so does that really help these engines ?
@frederik76012 жыл бұрын
it helps, but isn't 100% neccessary on a naturally aspirated engine
@lonelyplanetvibes48744 жыл бұрын
Aviator College ?
@MF-xs3zd4 жыл бұрын
wow
@SerAbiotico4 жыл бұрын
Now we need 34 boring students and have a race
@oldcrafty67204 жыл бұрын
Great video!
@bingozhao82804 жыл бұрын
why no CC ?
@aydina18404 жыл бұрын
Thank you for that informative video. 10 days before I also had a Relex Smile surgery but since that I have especially problems with my near vision. I see things blurry, especially text passages for example looking at my smartphone. Did you have same symptoms ? If yes, how long took the recovery time to have a clear near vision?
@CarOrgasmCarOrgasm3 жыл бұрын
How is it now Aydin? Did your near vision became better? Getting mine done in a month pls reply
@pietroaminpuddu18504 жыл бұрын
Very disappointed with this code when I did understand that y_train is composed by a sequence of 30 days returns. Once you introduce a system to de-normalizate both y_test and y_predictions you find out, unfortunately, that like other codes, where data are not 'normalized' but scaled with some scaler, the predictions are shifted to the right as usual. Clearly you mention the use of the code for volatility predictions but as the prediction power is lagged ...
@maryammahmoudigharaie4 жыл бұрын
Hi! Thank you so very much for the video! I have a question: in order to compute my prediction errors I need to de-normalize the values. I understand the formula to the de-normalization -as you mentioned in your website- but I don't know how the window size for the testing data works. I mean should I run the exact same code for the normalization with different formula on the prediction?
@student35064 жыл бұрын
Hi Jacob, thanks a lot such a framework. But I am bit confuse. How to denormalize predicted value? for example: X y [1,2,3] [4] [2,3,4] [5] [3,4,5] [x] if above example is normalized by the given formula, how can we denormalize when we predict 4,5 and x?
@user-lp8ro5lj8x4 жыл бұрын
You mention the vacuum pump leaks oil after a cold engine start up, did it also leak during normal operating conditions or just cold start up?
@acmsong38994 жыл бұрын
Cool. I have learned a lot from your code.thx.
@andreifarcas19204 жыл бұрын
My car lacks braking assistance sometimes, so I have to push the pedal very hard, do you think it could be the same cause? I didn't noticed any oil leaks
@mrphil34464 жыл бұрын
Mines doing exactly the same thing right now, scary when it happened going down a 30° hill haha. Andrei, have you fixed the issue at all by doing this job?
@andreifarcas19204 жыл бұрын
@@mrphil3446 nah, I didn't had the issue for quite a long time. Now It happend again. I heard from someone that the valve which stops the vaccum from getting back to the brake booster is damaged.
@mrphil34464 жыл бұрын
@@andreifarcas1920 thanks for getting back to me so quick, wasn't expecting it haha. Mine did it about 3 months ago and fixed itself and now it's done it again, must be the valve right next to the servo, thing is it sucks but not as hard as it should, I'll take that valve out and see if it makes a difference then if not it'll be the pump I reckon. Quite scary especially having a 6 month old baby in the car
@andreifarcas19203 жыл бұрын
@@mrphil3446 I suppose you already fixed your issue, sorry but I don't check notifications here :)) From what I've found out, you can only change the valve alongside with the vacuum pump. Because they come as one part.
@xinnywillwin4 жыл бұрын
cool content!
@chrisogonas4 жыл бұрын
That was a pretty clear presentation, and the presenter did not adopt the know-all attitude. Superb!
@ImranKhan-fi2sm4 жыл бұрын
Hii How to handle persistent model problem. While doing time series analysis i get the output which seems to be one time step ahead of the actual series. How to rectify this problem?? This thing i am getting with several ML, DL, and as well as with statistical algos. Please do reply??
@lelekkozje30494 жыл бұрын
Hello. Can this pump cause a gasoline engine knocking like a diesel engine. ?? I mean E46 318i N46.
@emilakhmedov96682 жыл бұрын
Probably u have problem with valvetronic
@Stencils_2k244 жыл бұрын
my eye power is -11 in my left eye and - 10 in my right eye...if am eligible for smile surgery...y am asking means am not eligible for femto lasik sergery
@JakobAungiers4 жыл бұрын
I can't comment on your personal eyes but I know that Prof. Dan Reinstein who did my surgery has successfully corrected vision even higher than yours! I'd suggest talking to him and getting a consultation where he would be able to tell you if you are eligable.
@Stencils_2k244 жыл бұрын
Jakob Aungiers ok sir..go ahead
@JakobAungiers4 жыл бұрын
@@Stencils_2k24 You can contact the clinic for a consulation here: www.londonvisionclinic.com/