Good 👍

Yeah I'm going to leave this one to the pros, thanks

should have dropped the sway bar

Thank you dude….. thank you

I just went through the same steps before I saw your video. The placement those carrier bolts are so bad, especially the lower one., WHY do you need to remove the carrier to remove the rotor? Engineers that don't care about servicing. I love my A4 though,

Are you related to Tom Tom Segura the comedian Bro 😅

Thank you! I think your advise at the end of video is wise, only if we can find a shop to replace the headliner for $300 to $400.

thx

This video does nothing for me, how/where are you looking at the codes

Where to get tool

Just did this job for someone for 400$, very helpful video👍

will this work on a tsi aswell?

Did you need to also upgrade the master cylinder or notice any changes to the pedal feel? Thanks!!

Hello. This repro is 8"?

This video is much appreciated sir

You helped me diagnose my turbo without the need to take it completely apart. I do have a loose watergate! So I will probably replace the turbo when I’m ready. I just won’t drive long distances because the p0299 code comes and goes but it hasn’t popped up lately. Thank you

What is the make and model of the lights?

does anyone know how to change the valve cover gasket for an a4 2010 b8? all the videos i have seen one with the timing cover connected

Good video 🎉

What city are you in?

Thanks brother

@carsandcoding thanks for the video! Very helpful in getting to the problem of my headliner leak/staining. Found the disconnected hose and joint and did a minor mod.

Great tips in this video man! Nice work

It was canceled in my car

Can I get Audi A4 2017 smart key

Hello

What scanner are you using to check the fuel pressure can you send me a link.

A 9 minute video for a 10 second fix.

After all these years watching you I can’t express how nice it is to see that you still kept this car! Cool fit for your daughter. Did you restore, or change the headlight covers, they look shiny.

Your guide is greatly appreciated. My car had an oil leak from the pump, and I fixed it by replacing the o-ring. 👍👍

actually changing vlve stem not the valve.

merci

How are they holding up?

merci

Very helpful this is going to save me $1000 doing it myself

Thank you so much man

How has the new pcv lasted? I live in Canada extreme temp differences from season to season? Where are you located and have you noticed any improvements with this newer version??

Hello friend, when im trying to fit the trim piece for the screen its like the hazard button is blocking it from going in

Next time maybe spring for the $15 proper tool so you dont have to clamp and use an impact like a monkey.

I did one and turned out perfect, it wasn't with sponge btw, and it could be teared off and corrected where needed

Saludos que falla presentaba la camioneta para cambiar el módulo ??

What brand OBD you using?

i just finished replacing the head gasket, timing belt, and water pump work on my 2001 Civic Ex coupe. replace most of the seal/gaskets that can leak (Cam seal both ends, crankshaft seal, and a complete Felpro head gasket with valve stem seal,,etc. after all this work eng oil change was due as well and noticed there was some oil leak just slightly above the oil pan near the lower timing cover area. I believe it is the oil pump O ring is leaking on my engine. I hope it is not too bad and the At-205 seal can fix this slow leak.

Thanks for the video. Well done!

Originally my Crank Sensor bolt snapped inside of the hole it goes into.. I was so worried it was connected to the block and thank goodness it’s not. I also had my timing cover flapping around coated in oil exactly like this video.. smh

Hi! 2yrs later how are they holding up? Thanks!

What was that spray you used at the end to clean the leaked oil? Thanks!

Ive changed my battery 2 years ago and now since my alternator keeps failing as its unable to communicate with the bcm so i haven codded it yet now i will do

It's as easy as having sex. In and out , in and out.

Hi! Is it possible to replace just the house, without dismounting the entire PCV valve? Thak you!