Audi A4 B8 Serpentine Belt Replacement

[@djtl900]

Thanks for the video ❤ Yesterday , i was picking up my kid from school, and as I I started the engine, suddenly, the staring wheel was so hard to stear. Pop up the hood, guess what? 😂 the serpent belt was gone, and I found half of the belt hanging on the regulator. I'm replacing it tomorrow morning. I just want to say folks check your serpentine belt ofen, especially when you're planning to drive outside the city.

[@Voodoo8648]

Serpentine belt diagram at 3:56 THANK YOU! I've been looking all over for this

[@Kiss__Kiss]

Welcome back, to making Audi videos.. I'm sure, all of your followers missed them.

[@seat786]

Yep

[@ratspam7655]

When Naptown Tuner’s belt broke, he deliberately let it go and he started with a junkyard engine he was willing to use for demonstration purposes. It’s always a good idea to inspect the belt with a flashlight every oil change and given the cost of the part, it’s worthwhile to replace every 100,000 miles. Seeing how much belt ended up in his engine demonstrates the design problems due to narrow clearances. Very scary but he kept on driving for another 12 miles when the average person would hopefully call a tow truck.

[@johnhorsley2078]

Extremely helpful. Thanks for the walkthrough!

[@tomgrimmer947]

Thanks for the video. Well done!

[@TheHuamantla]

You save the time to place my belt. Thanks...

[@theflybytourist8233]

New to your channel. Cheers for the info. It matched my engine. Others out there seemed to be different.

[@vinnydeluca2788]

Loved it man!! Thank you

[@albamels]

Nice video straight to the point 👍

[@seat786]

Recently replaced serpentine belt with a Gates belt & a few thousand miles later already showing wear on the outside. Keep an eye on it.

[@CarsandCoding]

Thanks for the heads up! I will check it for sure

[@johnniewalker6865]

Gates no good. Mine got fully shredded not long after also

[@MultiGamerz101]

I’m replacing my belt tensioner and idler pulley (I’m pretty sure it’s slightly seized. Already replaced OAP). Did you have any recommendations for this? Was hoping to do this without having to remove anything but the belt.

[@kryptonic6832]

When you changed idler pulley do you member the Torx size I have 09 idk if it’s t35

[@irbrulz]

thx

[@chrisperrin4329]

Thank you!

[@jamesgreen3392]

Love your videos. Haha you must have been thinking like me man cause I am almost at 90k and figured I better do it.

[@CarsandCoding]

Yep there was nothing wrong with it but after I watched @NaptownTuner have his belt sucked into the crank case I was like whoa!

[@viktorravnjak9413]

great video, subscribed. Do you have a manual, or did you just found a good picture? If you do have it can you tell where did you find it

[@adchop]

Hi, thanks for the video. Was the old belt stretched much... and do you really need the extended socket handle tool or can you just use a breaker bar? Thx much!

[@CarsandCoding]

You don’t really need the tool, but it helps. I did not see any issue with the old belt. But it was original and you just can’t trust belts after 95k miles!

[@kryptonic6832]

Hello I have an Audi 2009 a4 trying to change idler pulley but I don’t know the bolt size I think it’s t35 if anyone is sure? T30 was close but not grippy enough and t40 is to big

[@gillianhartwell1993]

Pp

[@JohnBowen-is6bn]

My car has 50k miles and somehow the belt fuckjng melted

[@CarsandCoding]

That sounds like a bad day. Hope you got it fixed without too much trouble!