I see no wiring for the possible missing light. It may be a higher model option or something they decided to do away with all together. Thanks for the video, tackling this while my daughter is in dance class lol
@danielshoop461114 күн бұрын
How can I contact you??? Having a problem with finding the correct help with my 7.3 power stroke, diesel fuel in my coolant system after they installed new injectors
@mikeramirez5622Ай бұрын
Slack adjuster 🤔
@MERICANMOTO2 ай бұрын
Mine when you floor it it builds boost up to a certain point then has a loud whistle and the truck start choking only happens slightly after it starts doing the 6.0 growl idk how to explain it very good but any idea?
@lizalopez71362 ай бұрын
My Truck Kenworth W900L 2008 doesn't blow air in. no functions
@HarrygTV2 ай бұрын
Maybe it's the blower motor...
@daMillenialTrucker3 ай бұрын
thanks man, i could not figure out why the screws on the outside of the panel wasnt taking the panel off, my door handle broke on the linkage and im trying to fix it and now i see theres about 9 other screws that gotta come out. thats crazy, like 16 screws for 1 panel lmaoooooo
@HarrygTV3 ай бұрын
I'm so glad it helped you!
@johhnycatengland-jx5id3 ай бұрын
Stupid video
@jfick32193 ай бұрын
Can you repair this or new rim?
@HarrygTV3 ай бұрын
I'm not sure if it can be repaired. I swapped it with a spare the customer had to get it going.
@mikejungferman47443 ай бұрын
Aluminum rim? Corrosion possibly
@HarrygTV3 ай бұрын
Yes, it's aluminum. I'm not sure what the cause was. I could not see any corrosion...
@rokomarkovic45563 ай бұрын
Oof just saved your self a couple a shits and fucks
@BigA19944 ай бұрын
What if air is coming out the small hole on brake chamber?
@HarrygTV4 ай бұрын
Hello! There should be no air coming out of the brake chamber anywhere. If it is coming out when the spring brake is released, then you should replace the chamber.
@teamdada21944 ай бұрын
International complete junk
@gabrieldiaz58795 ай бұрын
Thank you👍🏼
@jorgefacio6905 ай бұрын
so i have to chock my wheels push the yellow button in and then disconnect the service lines???
@HarrygTV4 ай бұрын
Correct
5 ай бұрын
Where did you get it ?
@HarrygTV5 ай бұрын
Ford dealer
@domingotorres19965 ай бұрын
Awesome Job sir
@lawnchaser5 ай бұрын
Had a similar issue with my 01 7.3. Terminal ends came loose from the cables. But i also had to cut the cable ends off before reconnecting them because they had a little bit of corrosion on them. After i cleaned the terminals, i put on just a dab of moly grease. Friend of mine told me that by doing that, it helps cut down on corrosion.
@josephuchan65006 ай бұрын
People want to see you taking it off 😮
@HarrygTV4 ай бұрын
😅
@tortew7406 ай бұрын
Can the truck completely lose power because of a bad turbo?
@HarrygTV6 ай бұрын
Yes. These trucks have very little power without boost.
@tortew7406 ай бұрын
Mine shut off completely I got new boot and new turbo runs great now@@HarrygTV
@tortew7406 ай бұрын
My cold side boot to the had cracks in it@@HarrygTV
@bridgetv687 ай бұрын
Thank you so much for the post. I would have never thought to check both the post and the clamp separately. I thank God for people like yourself.
@HarrygTV7 ай бұрын
Glad it helped!
@gregorderas52967 ай бұрын
500k 👍😍
@timl13457 ай бұрын
That cover comes completely off. You got better access that way.
@HarrygTV7 ай бұрын
Yes it does. Thanks!
@robneidige91088 ай бұрын
Works great as long as battery don’t die on you.
@HarrygTV8 ай бұрын
Just like the starter! 😂
@malikawan4588 ай бұрын
Coolant in oil 🤔
@HarrygTV8 ай бұрын
🤔
@GIJoeRay8 ай бұрын
Is the actual switch known for failure?
@HarrygTV8 ай бұрын
I don't think so. I haven't changed one since making the video.
@jhonyavalos57328 ай бұрын
My heater smell weird can you tell me what could be the problem..
@HarrygTV8 ай бұрын
It could be many reasons. Have you checked the filter?
@masadepatrickzubes43939 ай бұрын
This video is so informative and has just solved a problem for me that has lingered for more that three days. I really can express how I feel right now but all I can say is that am supper grateful to you for taking the time to share the clip.
@HarrygTV9 ай бұрын
I'm happy that it helped you.
@jeridcarter34209 ай бұрын
Thank you my guy been fighting the panel cause I've never took one off a fright liner . This helped me greatly
@moneymanlotto84139 ай бұрын
Good morning senior, am an apprentice in caterpillar mechanic please I really want you to be my mentor.
@lianleonard635710 ай бұрын
I have the same problem right now bro. Thanks for this video i thought it was the mas sensor
@edwardbryan207010 ай бұрын
Where is a good place to get this panel?
@HarrygTV10 ай бұрын
I got this one from my Freightliner dealer. I don't know if they are available after market or not.
@fernandoflores100010 ай бұрын
What do you have to do to fix it? Is it a bad wire bad conector or bad censor. I’m goi g trough this but I’m not a mechanic
@HarrygTV10 ай бұрын
I never did find the actual problem. We decided to replace the sensor and the section of wiring harness for the sensor. No more problems. Thanks for watching, I hope this helps!
@rexsingh11 ай бұрын
Thanks!
@meharyyohanes403911 ай бұрын
Good question
@IowaGoldProspectors11 ай бұрын
Are those batteries hooked up in parallel or series? Is that last battery the one the powers being pulled from? And like what tacticalLego said, is it closer to the engine.
@HarrygTV11 ай бұрын
They are parallel. The got battery is furthest from the engine. That is not the battery power is being pulled from.
@TacticalLego11 ай бұрын
It’s closer to the engine. Notice they get hotter and hotter the closer they are to the engine.
@HarrygTV11 ай бұрын
The hot battery is the furthest from the engine.
@srj10011 ай бұрын
Forget the air pressure, you need new tires.
@HarrygTV11 ай бұрын
😀
@a68rebel11 ай бұрын
which one is flat? The 3 or the one?
@HarrygTV11 ай бұрын
🤣, The last one that I hit had about 20 psi. The others had 100 psi. Most can tell this. If you can't, skip this step and go for the gauge. 😊
@DT-kl7uf11 ай бұрын
God there are some dumb people out there
@jonaustin834311 ай бұрын
A air gauge works if you don’t have a hammer.
@HarrygTV11 ай бұрын
Man! That's like saying, "toilet paper works if you don't have a leaf!" 😂
@careygoss74211 ай бұрын
Or use a pressure Guage 😂
@yungbroc11 ай бұрын
obviously it's not as accurate as using a gauge, but if you are using this method in between a routine pressure reading as a sanity check, I see nothing wrong. there's no need to check all your tires with a gauge every time you stop. this takes much less time meaning you can do it more often in between the clear/ more accurate readings. again, as a sanity check. the more familiar you are with your tires and their respective pressures, the better results you'll get using this method. It should NOT be a replacement to using a gauge tho
@HarrygTV11 ай бұрын
Yeah! and turn signals? How hard is it?
@HarrygTV11 ай бұрын
@@yungbroc i agree!
@jakeViper11 ай бұрын
@@HarrygTV I agree with you guys hammers way faster than pressure gauge
@HarrygTV11 ай бұрын
@@jakeViper Right! Hit it. Kick it. Something to quick check it!
@danielsmith189711 ай бұрын
They ain't want the door panel to fall off!! And I've never in my 25 years of being a technician seen a window regulator hooked to a door panel
@HarrygTV11 ай бұрын
🙃🙃🙃😀 Thanks for watching and commenting!
@BrandonDrew87 Жыл бұрын
Was the engine ok?
@HarrygTV11 ай бұрын
Yes. Still running good!
@pgrandberry9364 Жыл бұрын
Where's your shop?😮
@Cory14Tina02 Жыл бұрын
Got filter?
@robsamazinworld8159 Жыл бұрын
What was the problem
@HarrygTV Жыл бұрын
The cylinder head gasket was blown, causing excessive pressure in the cooling system, enough to overcome the cooling system pressure relief cap.
@robsamazinworld8159 Жыл бұрын
@@HarrygTV that's crazy I have the same exact issue my truck in the shop now!!
@HarrygTV Жыл бұрын
@robsamazinworld8159 sorry to hear. There are some other things that could cause that to happen, but on the truck in the video it was the head gasket... I hope it goes good for you!
@hugomedrano418711 ай бұрын
@harrygTV what are other reasons that would cause that besides the head gasket?
@bigdummy6301 Жыл бұрын
How do you know which one is the service line ?
@HarrygTV Жыл бұрын
If it has an aluminum center, it should have the word "service" cast into the part right under the port. If it doesn't, then it should be the port closest to the rod.
@SeeSaw99 Жыл бұрын
Is the entire chamber bad or just the diaphragm?
@milesshorey4695 Жыл бұрын
That looks like some of my junk!!!
@truckomize9326 Жыл бұрын
So that module was the issue ?
@HarrygTV Жыл бұрын
Yes
@tahoe6182 Жыл бұрын
Have you ever have one go out at same time as the radio and CB radio too?