Man echt cool💯👍 dafür fehlen mir noch ein paar skills😊

Mannnnn your flights are such an inspiration. Makes me wanna get some packs in a push harder! Great content as always fam! Side note but Im gonna binge your other informational videos once my term ends!!

you're allways so good

Very smooth as always

great flying, must have some fast rates?

Nice spots!

Hello my whoop friends. It`s good weather and no wind in the evenings. What does that mean? Correct! Whoop Race Practice!🚁💪🏻😃 Right now I just enjoy the summer and the good weather with my modified Betafpv 75Pro Whoop. I hope you do the same and wish you a lot of fun and good flights! Here is the video of the modifications on my Betafpv 75 Pro ButterflyFPV Edition: www.youtube.com/watch?v=2C1fC... Happy whoopin my friends! Whoop whoop! :-) Also note the other videos on this channel, the option to subscribe to this channel and my other channels.

Between the 75 and 75pro, which one do you prefer? And which one has better flight time or is the difference insignificant? I want to fly indoors and I would like to have the best flight time and performance

Ok i maybe gonna try to combine my BETAFPV 1102 18kKV with BETAFPV 2S 12A AIO, TCMMRC 75 mm TP-frame and 2 bladed 45 mm prop. 300mAh 2S 50C Lipos.

Whats your weight on this guy?

🦋 🔥

Impressive results!

what is your rates setup? Im looking for something in the middle of freestyle and Racing. I am also looking at getting higher KV motors and maybe a new camera any recommendations?

But I'm already BRUHless

This is the same spec on Cetus Pro, would that be coincidence ? Capable 2S.

I've gotten this far (and it's really interesting to take a motor apart!) but what would be _really_ interesting is if you could manage to re-wind a set of motors (to a KV you like) and have them work again. Looking forward to any future exploits of yours ;-)

Great content. 👍🏻. Love that little vice.

Yeah. Now you got me intrigued. Only just took a motor apart today to clean it out and was wondering about rewinding. Will definitely be digging some old motors out and tearing them apart in anticipation of the next installment. 👍

"And maybe like me use 0.00 Throttle MID and 0.3 - 0.6 Throttle Expo in Betaflight to get good throttle control." - very useful! Great fly by whoopbutterfly! Share your rates and expo for other inputs and throttle cut/max if you have please?

If I open the e clips, just use a needle, to open the axles and bearings, just a drop of iso propyl alcohol

Hello my whoop friends! All the important info is here in the video description! This video is not a step by step tutorial. It's just meant to help you and give you motivation to start dewinding whoop motors yourself. The first step is to disassemble and unwind/ dewind the whoop motor. That's what this description and this video is about. I'll hopefully show you the second part (rewind the motor to a new KV or and with thicker wire) in the video part 2 in one to two months. Until then, you can practice disassemble whoop motors with old motors that you no longer need. Then you can take the first step. I hope I can give you motivation and help with this to dewind your first whoop motor. Write me your experiences in the comments and please share the data from your engines (motor name and kv and how many turns) with me. ⚠If you want to be the first to know what I'm doing and what my latest findings and plans are, then pay attention to the community tab of this KZbin channel.⚠ ⚠If you like my work then consider supporting me, be it in the form of a subscription, a like, a comment, a recommendation to your friends, helpful data from your projects or other helpful tips. Without you I wouldn't be able to do this to this extent. Thank you my friends!⚠ ⚠If you are interested in the topic of winding your own motors then check out this facebook group: facebook.com/groups/457333120275712⚠ 0:00 Important info! 0:43 Start of the video 0:50 Removing the shrink tube of the motorcables 0:55 Removing the C-Clip 1:48 Seperate the stator from the motor base 3:17 Dewind the windings of the stator 11:05 Press out the ball bearing 12:35 Pictures (tools, dimensions of the engine, etc.) ► Steps to disassemble / dewind a tiny whoop motor: ● Removing the heat shrink tubing from the motor cables ● Removing the C-clip ⚠use your favorite technique so that the C-clip does not get lost⚠ ● Separate the stator and motor base from the motor bell ⚠be careful not to lose the small washers⚠ ⚠Take a photo or note of the order of the washers⚠ ⚠Store all small parts safely in a closed container⚠ ● Screw the motor base to a holder (old carbon frame, homemade holder, etc.) ● Clamp the stator in homemade clamping jaws ⚠No matter which clamping jaws you choose, they must hold the stator well without crushing it, thats the goal⚠ ● Warm up the motor base with stator with hot air to approx. 80-100 degrees Celsius (So hot that you can't touch it for longer than 0.5 seconds) ● Separate the motor base from the stator (if you need/want this step) ⚠possibly with the help of a screwdriver under the carbon frame / motor base holder to have a lever⚠ ⚠ This step is not always necessary⚠ ⚠Sometimes the PCB ring comes with it and sometimes it doesn't if it's glued on with epoxy. In this case you have to cut the enamelled cables to get the stator away⚠ If the PCB boards are glued on, you can leave them as they are or if you want them gone you have to warm up the motor base with the PCB board again to approx. 80-100 degrees Celsius and then carefully lift the PCB board all around with a small slotted screwdriver. ● Untangle and arrange the enamelled wires on the stator ⚠Note the Termination of your motor. Is it DELTA or WYE Termination?⚠ ● Start unwinding the one cable that is free and count the turns and write them down on a piece of paper after each coil! Our whoop motors have three phases and each phase has three coils. ⚠You have to know that there don't always have to be the same number of turns per phase. For example, some motors have 8,8,9 turns per phase. Or 8,9,8 turns. Make sure you count correctly.⚠ ⚠Sometimes there is epoxy resin in the enamelled wire. In this case the stator must be heated to a temperature of approx. 80-100 degrees Celsius during the entire dewind process⚠ ● With some motors you have to warm up the stator again and press out the upper ball bearing. ⚠After you have dismantled all parts of the Bruhless motor, you can clean it and possibly heat it again to remove any epoxy residue carefully with a fine plastic tool. You have to be careful not to damage the green insulation layer on the stator! If this happens then you have to insulate the open areas on the stator again with a suitable material. (I heard it works with nail polish/nail vanish)⚠ Afterwards, all parts of the Bruhless motor have been disassemled and are ready for rewinding. I hope I can do the rewinding video in the next two months.

possible to make a video how you configure your 75mm whoop ?

Great video! I fly GNB 530s on my 75s as well and I like them, but they are now old and I didnt properly store them. So I need new ones and I was thinking about folded cells lava 450 or tiny whoop or webleed. But after seeing your video I am in a dilemna. You're saying I'd better order 530s again? How come folded cells are not better?

i call it swiss cheese :D

I like it, i was preciously make some intake to blow my fc, quite effctive daytime since my vtx is quite hot ad 12:00 daytime. And yeah it work. Keepup the good share.

Could you try Cetus Pro, and fly 2S, if failed it would be great video, if it work it could be benefit on my flight. Please make the video ?

❤‍🔥❤‍🔥

Amazing huge job done and explained! About 1st modification- isn't itAWG22 originally and does it make that big of a difference? Could you please explain more in details why those 550mah batteries are bad to use? Where could I got the good/right pids/rates/expos/cuts? And most important... is this Meteor75pro is best drone for 1st one to start practice fpv/acro or you can suggest some other drone to pick?

Good stuff nice to hear you!

Yeah, but how do I make my drone slower? You can be humble as you want but nothing bad could be said about your flying other than Youre going way too fast and my brain cant keep up

love your content hope ill get as good as you :)

Good Stuff 👍 I found the carbon fiber ring protector/mounts from the motor wire at the base of the motors is often misaligned and not seated properly which can increase motor sound. First time I have seen these and thinking it might be good to remove them for weight. You think they help performance in some way?

Keep this channel in English. Please

Did you try the new hq 45mm props ? DFR has them in stock. I just put the 45mmx2 on, but havent tested enough.