laminar flow

Пікірлер

@UnderTheFallsCorals 5 ай бұрын

This in a basement sump?

@laminar_flow 5 ай бұрын

Yes, 11 feet of lift needed to get back to the display.

@evidenceofabsence_ 8 ай бұрын

Here just to listen to Psycho Killer

@heavenlyhatch6219 10 ай бұрын

Getting one second hand I’m a run it on a 80 gallon at like 25 percent 2 inch return and 2 inch drain you think it will be fine

@marcopilati7464 Жыл бұрын

here we learn NOTHING!

@guitarbrewa Жыл бұрын

Thanks so much for an easy to understand video! I use mine for brewing despite being envious of that beautiful tank LOL ! so, my issue was knowing what that AH and AH was and that was why i kept getting that alarm and it would shut the system down. THANKS AGAIN!

@bimboom5244 Жыл бұрын

this worm can regenerate. infinite food glitch

@asimsg9231 Жыл бұрын

How do you compare the noise levels between both pumps? As I’m going to use one of them for my tank in my bedroom.

@laminar_flow Жыл бұрын

They are both equally quiet. You will hear waterflow in your pipes more than the pump

@asimsg9231 Жыл бұрын

@@laminar_flow And the lowest the go is 30%?

@larryk9573 Жыл бұрын

Hi laminar, im making my first sump. It's a 40 breeder for a 180g freshwater large cichlids and maybe eventually a 300g tank. Maybe 3-4ft vertical head and 1 or 2 elbows. For now will be using the eshopps PF-1200 hob overflow, upper limit of 1250gph. Do you think the dcp-15000 would be sufficient or is the dcp-18000 gonna save me on overall wattage for the same flow?

@laminar_flow Жыл бұрын

Of all the things I learned, upsize upfront if possible. The pumps can be run at lower rates, but having more will help at some point.

@fungiracing4774 Жыл бұрын

Hi, can this unit be used with a trigger switch. In other words, could I connect a switch to this unit so that it only begins to run a program when the switch is activated/triggered? Many thanks

@laminar_flow Жыл бұрын

I would doubt it. This one is pretty primitive. You may need something more like a micro controller

@bwahbwah22 Жыл бұрын

❤ the song selection! 😂😂😂

@kennedysimone5807 2 жыл бұрын

Is he still alive in 2022?

@laminar_flow 2 жыл бұрын

No, I lost him a few years ago

@surfinairwaves9284 2 жыл бұрын

Not bad

@chimpanzeescouldkillyou6009 2 жыл бұрын

that crab is probably loving live

@kenoberg 2 жыл бұрын

Does this TC420 controller only work with RGB LED strips and aquarium lights? I have a single 12V 5W dimmable GU5.3 white LED bulb attached to CH1 for a sunrise/sunset scenario and when the scheduled time begins, the light will only turn on to 100%. It will not dim even though the bulb is dimmable. Thanks for any information you might can provide.

@Arthur-tu9ty 2 жыл бұрын

kzbin.info/aero/RDCMUCEJtR2PvIYiuPiuC4-1_Q6g&playnext=1

@Arthur-tu9ty 2 жыл бұрын

I want to send you a video of this guy in South Africa. He uses the same pump 4 of them . He has 18,000 gallons how is this possible to filter that much water.

@Arthur-tu9ty 2 жыл бұрын

What’s the gph on that pump?

@laminar_flow 2 жыл бұрын

The names track their ratings in liters/ hour with no head pressure. So you should get 4k gph +/- with no load, running all out. Obviously, you will have a load in your system that will bring that number way down. I am in the basement, pushing the water up 10 feet to the first floor and believe I get 500 gph or more running at about 70% on the pump. I am a big fan of these DC pumps because you can dial them back and know you have some room to bump it up as the pump gets dirty and keep the same flow rate.

@Arthur-tu9ty 2 жыл бұрын

My pond is 17,000 gallons I don’t think that will work.

@frederf3227 2 жыл бұрын

I am interested in making a false lighted window in a kitchen. Would it be possible with this product to program an entire year's worth of programming based on almanac data so the timed lighting would match the seasonal daylight?

@laminar_flow 2 жыл бұрын

You could make a lot of schedules to match the season ( not sure of the limits on numbers of schedules, but I am sure there is one somewhere), but I believe you would need to change which schedule you are running manually. There is likely a more fully featured scheduler out there now, this one is a few years old

@brandonrembe5612 2 жыл бұрын

I’m enjoying this music more than I should 😅

@amaurydecocqueau4514 2 жыл бұрын

Great tutorial! Can you also program up to seconds?

@MrSeekerOfPeace 2 жыл бұрын

I would have used a conch snail. Although it would've killed anything else in the tank. So the crab was probably a better choice

@Thundering_Banshee 2 жыл бұрын

No mention of temperature range. "I'm just gonna plug it in and play with it" isn't much of a review.

@jean87luc 2 жыл бұрын

I have installed the controller with the setting it does turn on at 4pm (it was around 2pm during installation), turned on the voltage and it lit the light up despite the mode has a rule of 0% on all channels from 00:00 to 16:00. Technically it should be off until 4 pm. Does the RUN option on the menu turns the entire controller on or off or just the programme?

@anniejefferson4642 2 жыл бұрын

Haha ❤

@burakkanidagli8168 2 жыл бұрын

Hi I was just wondering if you had a good experience with your pump or if you had any problems

@mikeleonard4244 2 жыл бұрын

What size tank are you running the 18000 on ? Drain and return sizes? Thanks in advance

@laminar_flow 2 жыл бұрын

The display is 125g, with a 2" return, that splits to a pairs of inlets in the tank. Drain line is 1 1/2, with a gate valve that limits it down to get siphon flow without slurping air

@jmcdvm 3 жыл бұрын

What's with the distracting music? Title indicates "set up", but meandering narrative did not give thorough set up instructions. Wast of time😕

@bigrue10 3 жыл бұрын

Hi can you please tell me how to clear the timer times back to factory settings I’ve tried holding the reset button but nothing happens as I want to change my times and if I make a new mode it just adds to the times that’s already exist thanks.

@laminar_flow 3 жыл бұрын

I don't know of a way to do that. Sorry

@claudiahenk8048 3 жыл бұрын

If come here for the actual how to set it up you will be wasting your time.

@cacanhbienvungtau1571 3 жыл бұрын

thank for share, I am setting a sump at Basement of my house. My Display tank( 200 * 750 *600 cm) in Ground Floor, The distance from sump to main tank about 7-8 meter. What Kind of return pump I should use? Thank so much ( I am thinking about Jebao DCP 20000 )

@laminar_flow 3 жыл бұрын

I would get the biggest pump you can in the family. If you run it at less power it will last longer as well. There is definitely a step up in performance from the 24v to the 36v, so make sure you go with a 36v pump.

@asimsg9231 Жыл бұрын

@@laminar_flow did you notice any higher noise level when you compared 24v to 36v?!

@da-madmodler4692 3 жыл бұрын

Wow surprised my arrow crab would hurry over rocks to get at a Bristol worm.

@KennethiSlite 3 жыл бұрын

Hi I have a TC420 that suddenly went down. Now I don't have any text in the LCD panel and trying to reset it did not help. I tried to make contact with the chineese seller on Amazon but no response. My guess is that the unit has lost its basic programming. I cannot find the CD and now asking you if you possibly can check your CD if there are som code i can use to do a restauration of the unit. Thanks in advance! /Ken

@stellarlivingstoned 3 жыл бұрын

How dare that bitch get in the video

@thend007 3 жыл бұрын

While programming let say if per channel is 4A does 50% means half of those 4A or half of actual load

@MajinObama 3 жыл бұрын

1:26 Made me think of the dancing Spongebob Anemone x)

@tilexcan 3 жыл бұрын

I have a question about UV Sterilizers. If I have a 57 watt sterilizer plugged into my apex shouldn't the wattage used show up as 57 watts. I have a Pentair UV rated at 40 watts and on my apex it draws 45 watts. My Aqua UV 57 watt unit draws 33 watts. How is that possible?

@laminar_flow 3 жыл бұрын

Not totally sure on this, but I am pretty sure the power consumed is related to the resistance (rating) of the bulb. As the bulb ages that value could change. If you replaced the bulb, I believe you will see a change in the power consumed.

@tilexcan 3 жыл бұрын

@@laminar_flow BRS mistakenly sent me six bulbs when I ordered a replacement for the low reading old bulb. I tested each and the readings were 33 to 48 watts. How is that possible for bulbs supposedly putting out 57 watts. My Pentair UV is 40 watts and consistently runs at 45 watts. I returned all the bulbs except the one that ran 48 watts. How do you sell a 57 watt sterilizer that only runs 33 watts for $600

@MomboJumbo 3 жыл бұрын

Thank you!!!

@hormborey8233 3 жыл бұрын

Let wipe all of this bristle worm

@LAIDBACKMANNER 3 жыл бұрын

Thanks for making the video... Lizard happy now.

@shanechav423 3 жыл бұрын

Dope video

@iverson2k10 3 жыл бұрын

I wish we didn't have music so we can hear the actual fans to see how loud it is.

@LRRPEXILE 3 жыл бұрын

I live on the first floor and my set up is by the window, I work and game on my PC, I've been looking around for the best compact window fans, that would keep the outside from looking in, 3x 120mm at 1300rpm Fan Speed with control speed, this is perfect for me to put on the window to pull in cold air at the same time giving better privacy.

@bradhiggins4813 4 жыл бұрын

Thank you for the explanation on the long final press to set. My directions were crap, and mine kept reverting to C. I thought it would set at time-out. Wrong. I'm sucessfully using this to regulate a 250W heat lamp in a chick brooder (with a dimmer to promote bulb life). Probe is under vinyl flooring, then pine shavings. Temp gradient is about 6 deg. from probe to surface. Chicks like 95F, Inkbird is set at 88. Close enough. All good.

@w0lf1969 2 жыл бұрын

How are you using the dimmer? I am using this for the same thing. Thx

@AshleyxScreamx 4 жыл бұрын

What happens when my AL is blinking? I use this for my hedgehog tank and have it set at 77. I’m confused on what to do

@destinyrodriguez5730 3 жыл бұрын

Hi! I’m sorry to bother, but I’m super confused as well. I have my CHE set up to it but the heat does not turn on at all? Have any suggestions?

@destinyrodriguez5730 3 жыл бұрын

I too have hedgehogs and I’m trying to figure how to have this thermostat turn on my CHE

@orozco1309 4 жыл бұрын

What size pvc is hooked up to the pump?

@laminar_flow 4 жыл бұрын

The pump comes with a variety of fittings that can be used with the same threaded collar. I have 1 1/2 attached to mine

@sergeygorbachev7583 4 жыл бұрын

Hej. Thanks for the video. I have a question to your yellow parazoanthis in the background (i guess thats it). How do you manage to make them extend so much? Mine are wide open, but have almost no these beautifull yellow bodies, as yours. Any tips?

@laminar_flow 4 жыл бұрын

They extend toward the light when they are not getting enough. In this tank, my lights were very under powered, at the time.

@nastynate84nc 4 жыл бұрын

So basically on the channels on this controller you have your blue strip/board on say channel 1 and your white led chip/board on channel 2 , so you can dim them independently at certain times? Or do you gave the leds boards daisy chained together then connected to the controller?

@laminar_flow 4 жыл бұрын

Correct, blue and white are on separate channels and programmed independently

@the.humble.reefer7230 4 жыл бұрын

What's happened to the updates?? Was enjoying your channel.

@gmcgeever4772 4 жыл бұрын

Absolutely smashed it mate The instructions it comes with ain’t worth a shit lol thanks

@LAIDBACKMANNER 3 жыл бұрын

Then I happy I accidently lost the instructions so I could come here and save myself from frustrations and annoyances, lol.

@averylow6524 4 жыл бұрын

Good song choice

Ең жақсы KZbin

Пікірлер