Tavish Music Official

Пікірлер

@onetime5411 20 күн бұрын

The deserve some type of acknowledgment he committed to the bit fully💯

@TavishMusicOfficial 20 күн бұрын

@@onetime5411 😂😂😂

@nobleisrael1 2 ай бұрын

Beautiful! Do you know what instruments and sounds you used? I would sure like to know how you put this together. I get overwhelmed with the choices available in Ableton but love the Push. Any help would be greatly appreciated. Again, a beautiful production.

@TavishMusicOfficial 2 ай бұрын

@@nobleisrael1 cheers mate! Glad you enjoyed it! If I remember correctly, I used a bunch of stock instruments along with UHe Diva, Kick2 and a couple of other VSTs. Putting these sets together is a lot of fun! I normally just fool around till I find a loop that I vibe with and then try and add some structure to it. I know that's a little vague but that's pretty much "the process" in a nutshell! If you have any specific queries, let me know. I'm not an expert but I'll do my best to help you out. :)

@nobleisrael1 2 ай бұрын

@@TavishMusicOfficial You have a great sense of composition. Do you usually start with rhythm or melody? I really enjoy the downtempo ambient vibe.

@TavishMusicOfficial 2 ай бұрын

@@nobleisrael1 thank you so much! I usually start with the melody - play around with synths and sounds till I find something that I vibe with and then build the rhythm around that. I'll normally have a basic 4 to floor and a hihat in the background to work with. Luckily, electronic music lends itself well to my fairly basic rhythm composition skills!

@elijahday2878 3 ай бұрын

nice one, thanks champion :)

@SalmanSuhail 5 ай бұрын

Just placed an order on Amazon - thank you so much! This will finally make my Push 2 usable again!

@mikebailey783 6 ай бұрын

Lovely, lovely sound!

@afroham 6 ай бұрын

thanks! Found out that you can use spiritus as well, costs 2 euros in the Netherlands. If helpful to anyone!

@Nullscr1pt 7 ай бұрын

Dont use Goo Gone... use 90% isopropal alcohol, and just rub the rubber off and you will have plastic underneath... I thought I was the only one with a sticky push2!!! apparently, everyone has the issue... rub the rubber off with ISO 90% and it will be smooth underneath

@TavishMusicOfficial 7 ай бұрын

Yeah I finally ended up using 70% alcohol and finishing it off with a layer of goo gone. The alcohol takes off most of the sticky stuff and the goo gone creates an additional layer. Worked like a charm and the gunk hasn't returned since!

@sialahvl 7 ай бұрын

Learning ableton push 2 and this is inspiring. Thank you 🌎🤍

@SunsetsAndSoundwaves 7 ай бұрын

This is fantastic!!! Do you think the standalone push 3 could be used to do all you did here in the session, while using the MPC plugged in to it as a midi controller? curious to see.

@TavishMusicOfficial 7 ай бұрын

I'm not sure about the standalone Push 3's setup with other gear but it should work. Glad you liked the video! :)

@koiib 8 ай бұрын

Wow thank you! This is highly validating. Just spent hours scrubbing the goo from the bottom and sides of my Push. I still have more to do. I have been using microfiber clothes because they give off less lint than the other towels I had laying around…however they still leave little bits of fabric almost worsening the situation. I’ve found that copious amounts of goo gone and scrubbing quickly in little sections, going bit by bit has worked best. It seems like the friction and heat are what are making the difference. Super frustrating issue, wow Ableton not cool.

@TavishMusicOfficial 8 ай бұрын

Yeah I tried a whole bunch of things. A cloth dipped in 70% alcohol also works wonders at getting the large chunks of gunk off. After that, a full wipe down with goo gone. Solved my problem and the goo hasn't returned!

@artaverde9131 9 ай бұрын

I was arleady decided on T5V, but finding this review was cherry on the pie. Most creative review ever seen :)

@TavishMusicOfficial 9 ай бұрын

Haha! Thanks a ton! So glad you liked it! They're really great monitors 👍🏼😄

@mayabatramusic Жыл бұрын

You are an absolute legend. Thanks for sharing. Trying this tomorrow. Can’t believe they’ve made such an expensive piece of gear with such cheap material.

@TavishMusicOfficial Жыл бұрын

Haha! Yeah it's pretty ridiculous how quickly it degrades. I ended up using 70% alcohol to wipe the Push 2. That gets the majority of the gunk off. Then use Goo Gone to give it a final few wipes. Works like a charm!

@CrushTheWealthGap Жыл бұрын

same issue - yup, Goo Gone was going to be my first go to to fix this. Thank you for the confirmation.

@iameam Жыл бұрын

For what it's worth. Goo Gone did not work for me. But I used rubbing alcohol which, after a ton of elbow grease, completely removes the rubberized coating all the way down to the plastic surface. What a pain in the A. Thanks Ableton!

@TavishMusicOfficial Жыл бұрын

Yeah I ended up using alcohol first and then a wipe down with goo gone. Thankfully the Push 3 seems to have solved that gooey issue but unfortunately I don't see myself upgrading to the 3 anytime soon

@johncitizen8828 Жыл бұрын

OK - did anyone find out if this has any adverse effects on the unit before I try this myself?

@MrGheller Жыл бұрын

Where do you get that in USA?

@TavishMusicOfficial Жыл бұрын

I ordered it on Amazon USA but I'm sure it should be available in other countries too

@MrGheller Жыл бұрын

@@TavishMusicOfficial Yes, in USA. What search term on Amazon to get to the right product, please?

@TavishMusicOfficial Жыл бұрын

@@MrGheller just look for "goo gone". It should pop up

@MrGheller Жыл бұрын

@@TavishMusicOfficial Thank you for the help.

@ilovejapanesemusic3858 Жыл бұрын

No idea what a push 2 is 🤔

@TavishMusicOfficial Жыл бұрын

Haha! It's a controller/midi instrument for a music software called Ableton. If you check out some of my other videos, you'll see how it works.

@chazcross9201 Жыл бұрын

Joy indeed!

@justaskin8523 Жыл бұрын

On my Push 2, it's the ENTIRE BOTTOM of the unit except for the little feet-pads. Ugh, it's so gross, and my fingers got sticky just moving the Push 2 to a box so that I could have some electrical work done in that room. Edit: I've used Goo-Gone, Goof-Off, and even WD-40 to get this gooey stuff off of other equipment. But for the Push 2, I'm seriously considering just covering the bottom with Gorilla Tape. That's like duct-tape, only it is a glossy black color, and Gorilla Tape has micro-perforations for easy tearing. I've used Gorilla Tape to hold drain pipes together, and that stuff has actually lasted almost 10 years underground, lol! The Gorilla Tape will take me an hour to apply, as opposed to spending a whole day with one of those other options. Another possible option would be to remove the bottom plate from the unit, then soak some paper shop-towels in acetone (fingernail polish remover), and just lay the wetted shop-towels on top of the goo, then wrapping the whole thing in a plastic garbage bag to simmer and brew for a half hour. That might sufficiently loosen the goo. Man, I hate the wiping and wiping and endless wiping to get this nasty rubber off of something. Of course, it might be easier to just make a new bottom plate out of a 1/2-inch thick plank of wood, stain it, and then drill holes for the screws. If I had a 3D printer, that might be a good project too. Friends don't let friends design stuff with fake rubber that turns gooey after a few years!

@TavishMusicOfficial Жыл бұрын

Yup same here. It was so disgusting that I just didn't want to use it any more! But the cleaning trick works a charm. 70% alcohol wipe down followed by goo gone and you'll be back to music making in no time! 😀😀

@joannehorrex7548 5 ай бұрын

Nail polish remover is a no go it will melt the plastic at turn it white!

@faronmclurkin1103 Жыл бұрын

Wondering if it had any adverse effect afterward? Thanks

@TavishMusicOfficial Жыл бұрын

None at all. I used 70% alcohol first and then a wipe down with goo gone and the stickiness hasn't returned since! That's just my personal experience so I'd suggest trying it out on a little patch before doing the whole thing.

@faronmclurkin1103 Жыл бұрын

@@TavishMusicOfficial thank. Lot man. Much appreciated 👍

@faronmclurkin1103 Жыл бұрын

Btw that's a sub just because

@justaskin8523 Жыл бұрын

I can also confirm that it doesn’t damage anything. I’ve used it on several pieces of equipment. For the push to, I think I will take it apart so that I can bear down on it and apply some real elbow grease, and also to avoid getting Any solvents inside of the electronics.

@johncitizen8828 Жыл бұрын

@@TavishMusicOfficial Is the 70% alcohol beforehand essential, or can you just use the Goo Gone?

@wiktoriagwozdowska5484 Жыл бұрын

Thanks for a tip im going straight on amazon and buying it 😅

@TavishMusicOfficial Жыл бұрын

Give the Push a once over with diluted alcohol first. Then the Goo Gone doesn't have to work as hard and it keeps the stickiness away. It worked for me but try at your own risk! Maybe try it on the back on a small patch first to make sure the alcohol isn't too strong.

@DieMenschMaschine Жыл бұрын

The sound design was just massive, the atmosphere, the aqua. Almost at the end, what a trip!

@TavishMusicOfficial Жыл бұрын

Haha! Your comments made my day. So glad you liked the track! Cheers!

@DieMenschMaschine Жыл бұрын

M sooooo stoned

@TavishMusicOfficial Жыл бұрын

😂😂

@DieMenschMaschine Жыл бұрын

F#€k those leads, THOSE LEADS!!!

@DieMenschMaschine Жыл бұрын

DAMN Dude!!! What a beautiful vibe. Pure brilliance ❤

@sutusmihaly Жыл бұрын

..best product ever to remoove sticky stuff..with a smell of oranges or smthng citrusy..

@notgodzod Жыл бұрын

"Flailing arms = confusion" - ace! I identify completely :)

@chrisliddiard725 Жыл бұрын

Same here. Fortunately, the rubberized surface is limited to the sides and rear of the Push 2. The push 1 is worst as that rubberized surface was also applied to the front. The other thing to try is the stuff you use to clean the glass surface on cookers. It really depends on how far gone the surface is.

@CrushTheWealthGap Жыл бұрын

ahh man, imagine if the rubberized surface was around the buttons too. That would have been a complete mess

@dizco4life Жыл бұрын

It took me an entire day to remove the sticky stuff from the backside.. It appears that Ableton has learned from their mistake as Push 3 does not have such a coating 🙂

@808BOT_Beats Жыл бұрын

🔥🔥🔥🔥

@sonoratum4020 Жыл бұрын

Increible! No puedo dejar de ver el video, la programación del sequencer de probability es excelente. Eres muy bueno, un artista. Una pregunta: ¿como haces para que el secuenciador "Patern" de "probability" haga pausas? Automatización "ON/OFF"?

@andrerival123 Жыл бұрын

when u clean it the rubbery finish goes away with it right?

@TavishMusicOfficial Жыл бұрын

Nope. It's still got the soft touch finish. It just removed all the stickiness. Try this on the back on a tiny patch first. I don't want anyone blaming me for a ruined push! 😀

@justaskin8523 Жыл бұрын

Well, when I removed the sticky rubber from an old logitech throttle and joystick, all of the rubber had to come off. I worked on that for several hours and got it down to the bare plastic. So the entire “soft touch“ surface did end up getting wiped off. It ends up all over your paper towels or whatever you’re using. And then you just throw it away with the paper towels. Seriously, that joystick and throttle are a joy to use now even though it’s just bare plastic without any soft touch material. Anything is better than feeling like you stuck your hand into a sugary dessert and then let it congeal on your fingers!

@frankymadrid3724 Жыл бұрын

🙌🙌👏👏👏

@TavishMusicOfficial Жыл бұрын

🙌🙌

@dr.gregoryf.maassen2637 Жыл бұрын

You make it look so simple, but oh my, this is so complex. Brilliant performance.

@TavishMusicOfficial Жыл бұрын

It's always so rewarding when someone actually understands what's happening and doesn't think it's just "pushing some buttons". So glad you liked it! Cheers!

@dr.gregoryf.maassen2637 Жыл бұрын

Incredible performance. Thanks for sharing.

@thegeenius Жыл бұрын

really appreciate you sharing what you've discovered--- same issue here, love my push 2, works perfectly but,, the sticky stuff on the back is just annoying,,and i carry it around alot

@TavishMusicOfficial Жыл бұрын

Glad it was of help! Try using 70% rubbing alcohol first. It'll get rid of most of the sticky stuff and then a final clean with goo gone. I used alcohol on the Ableton label as well and it didn't eat into it or anything. Stay away from the rubber pads though to be safe. Try the alcohol on a small patch at the back and if it works for ya then great! Having a clean Push makes a world of a difference especially if you're logging it around all the time. Cheers!

@rmf233 Жыл бұрын

Hey Tavish! Nice bro! Very nice! How long do you play the ableton? Is it difficult to learn to at this level?

@TavishMusicOfficial Жыл бұрын

Cheers mate! Glad you liked it! I learnt everything I know off of KZbin and just experimenting. Like anything else, practice helps! Ive been fiddling around with Ableton for about 10 years now so it's a question of familiarity with the software. Happy to help if you have any specific questions.

@rmf233 Жыл бұрын

@@TavishMusicOfficial Really cool and very well played! I DJ on vinyls already for some 5 years and everything from youtube as well. But there still some road to go ahead, so its kind of hard to decide some new stuff. I already have a handpan which would be really nice to play with some ableton beats!

@greymatterdecay Жыл бұрын

Would love to see an explainer video!

@frankymadrid3724 2 жыл бұрын

🙂👍👍

@Keilnoth 2 жыл бұрын

This is fire also! You should start posting some of these again.

@TavishMusicOfficial 2 жыл бұрын

Cheers mate! It's been a busy couple of years but the moment I get some free time, first thing is going to be the tutorial for Lost In Isolation followed by more performance videos. Appreciate the love and support! 🍻

@Keilnoth 2 жыл бұрын

@@TavishMusicOfficial Subscribed already, waiting for the next one! 🙂

@Keilnoth 2 жыл бұрын

Have you had that stuck pads problem too, and maybe fixed it somehow?

@TavishMusicOfficial 2 жыл бұрын

I havent had any problems with stuck pads. Just the disgusting melted gloop on the sides and underneath the Push. Check reddit though, you might find someone whos had a similar problem.

@engeomusic 2 жыл бұрын

Had stuck pads - you can send it to Ableton and they'll replace it with a factory refurbished one for $100

@Keilnoth 2 жыл бұрын

@@engeomusic I wrote to their support they didn't even mention that. Not sure they can repair. What part did they change on your Push?

@justaskin8523 Жыл бұрын

It may be possible that they’re not doing the refurbishment anymore, because they’re just about due to release a new version of push (if indeed that’s what they’re going to do). At this rating, native instruments has already announced two new versions of devices, and I suspect other manufacturers will be doing the same now through October/November, just in time for the Christmas season!

@Keilnoth 2 жыл бұрын

This is fire! 🔥

@TavishMusicOfficial 2 жыл бұрын

Glad you enjoyed it! Cheers!

@onetwentydb 2 жыл бұрын

Ohhh myyy goodness. THANK YOU. My Push 2 is in absolutely perfect condition aside from that sticky rubberized coating, I've got a pair of DJ headphones that are the same way. Cheers dude, happy 2023!

@TavishMusicOfficial 2 жыл бұрын

Haha! I felt the exact same sense of relief and elation when I finally cleaned my Push2! 😂😂 Happy music-ing!

@sonoratum4020 2 жыл бұрын

Increíble, eres un artista. Me has llevado a Bhömer

@TavishMusicOfficial 2 жыл бұрын

¡muchas gracias! Me alegro de que te haya gustado la música.

@potokritma6550 2 жыл бұрын

Super 🙏🏼 Sounds Great 👍🏼 this instruments is VST of Abletons synths?

@TavishMusicOfficial 2 жыл бұрын

Hey! It's a mix of Ableton stock VSTs and others.

@kunalpareek8321 2 жыл бұрын

Super. My push 2 is in a super bad shape because of this stickyness. The start button is stuck because of this.

@TavishMusicOfficial 2 жыл бұрын

Try 70% alcohol first before you put on the goo gone. It removes most of the gunk! Haven't tried it directly on the buttons so be careful if you're trying that. Alcohol might eat through the rubber buttons

@justaskin8523 Жыл бұрын

I know it’s been a while, so you probably have already done this. But just for anybody else who may be coming along, I would recommend removing the panel with the sticky stuff on it, and then cleaning the sticky off of it. I agree with Tavish that you don’t want to get any of the solvents on any of the buttons and pads. They may be silicone or they may be rubber. I wouldn’t want to see anybody burn a hole in any of their buttons!