This 9 years old video tutorial really help me😅 TY so much

Have used this tripod for video with a fluid head and found it to be quick and easy to use and very stable. Its heavy but its built well.

2024, still saving lives

So what is the science here? Does this chip have some kind of timer that says "After a certain period of time, reject battery?" Like Apple or something?

Works perfectly! Thanks

One of the best tripod videos I've seen, thanks for posting.

I hope this works thank you

This legit works, I thought I was out of luck after replacing the battery then did this and it legit works

Thanks!

Perfect. Thank you!

already do this and restart my imac begore but still same..

Will this ball head fit on the older series 055 tripods?

Here is what worked for me with no dissassembly. 1) Plug in the charging plug to the remote (1 light will flash) for 30 minutes which will heat up the board. 2) After 30 minutes Press power button twice as if you're turning on remote. The 4 lights will light up in sequence and the first will stay solidly lit. 3) Leave remote on for five minutes. 4) After five minutes, press twice to turn off. 5) Leave charging plug in place. Wait 5-15 minutes and it will start charging normally.

I have a DJI Phantom 4 Pro where the remote controller wasn't charging at all. I would get 1 out of 4 LEDs blinking rapidly on the controller when attached to the charger for about 5 minutes and then it would just shut off. I disassembled the remote and applied heat to the chip as your video shows. I now have 4 out of 4 LEDs lit and the remote control fully charges. Thanks for posting the video. I used a reflow tool that allowed me to set the temperature and blower speed. I had it set to 3 out of 7 for blower speed and approx. 700F for temperature. I used a piece of thick cardboard to protect other unrelated components from getting blasted with the heat. I applied the heat over the IC chip for approximately 10 seconds (moving it around overtop approx. 2-3 inches from the chip) then took a break and applied it a second time. After letting it cool down, I have all LEDs lighting up and full charge. Interesting, the issue wasn't just preventing the battery from charging. After I applied the fix, the battery was fully charged already. Before applying the fix, the remote controller complained the battery was almost dead. So this issue wasn't just affecting charging, but also powering the controller properly from a fully charged battery. Thanks again.

In a54 samsung it's not working😢😢😢😢😢. Such a badtard of all the phones I had

Thanks! Still helpfull in 2023😊

Funktioniert wirklich. Danke 😊

This technique worked for me. I was reluctant to purchase a Reflow machine for a one time use, so I decided to try a Heat Gun that was variable between 112℉~1202℉ and I had it at the highest for about 30 seconds on the main IC Chip as shown in the video next to the blinking LED's I just kept making sure to move the tip around and not leave it in one place for too long. After I did this, I plugged in the batter and the charger and had the 4 lights flashing like it was charging. I held off on assembling it and I reflowed it again, this time doing both the front and back on the Main Board. Tried the battery again, and 4 lights were blinking. So I assembled it and tested it and TA DA! It was changed and then took my P4 out for a test flight and it works just like new. Thanks!

It helped me today 05-07-2023. Thanks a lot

Thank you, even though I had nothing open, I had to force quit 3 other apps for it to work.

I need a heat gun now lol

This really works. Took about 20 minutes with all the right tools. Thanks!

Thank you! Still very helpful!

I amount gave up, and tossed my remote out. Until I find this video. The video is 7+ years old, so finding the volume button setting was a little different on the OS10 devices, but the concept was the same. Thank you so much. 👍🏻

Nope

awesome, thank you

GOAT

Very helpful 👍🏻

Thank you so much!! Worked like a charm!

While the menus are obviously different now, the setting is still present and this still works in 2022 on the latest Android. Thank you!

To shoot low to the ground facing forward, you'll need the 90 degree adapter ($100). If you use the tripod's anti-rotation adapter, it will get in the way if you try to rotate the 90 degree post position. No matter since it only really secures the 90 degree center post fully when lined up in its zero position (notch lined-up).

Thank you!

Thank you sooo much!!

Information helpful Thankyou

Brill !!select "Volume as shutter" on Sony Xperia 5 it worked thank you!!

man..

I have a Lacie drive which I used for years and now I have a new Mac. This new mac can´t save on the lacie. I´ve tried to change ownership in the info but it doesn´t work. You have any ideas? =)

Funny thing is if you check the battery voltage with a meter I find it's full. The chip responsible for measuring the voltage is faulty. Done this routine many times. It's not a permanent fix

you are unreal, great help

Thank you very much for your help. I looked at about 11 other videos and none of them helped. Yours worked immediately. Once again, thank you.

damn 2011 😳

Thank you so much. This was very helpful

Thank you so much!

Over a year since I've used my p4... Ordered a new battery, and nothing. I did exactly what you suggested and its working perfectly fine! Dude you just saved me the money of a new controller! THANK YOU!!!!!

Great video. Advice is spot on. After doing this, one of my controllers charged up the first time. The second controller charged after I performed this fix a second time. Thank you!

Worked!

IT worked for me Seth thank you so much so helpful - very good thinking!!

BRAVO... BRAVO... thank you so much

Wow, so no holes to drill into the roof huh. How secure has it been? I am planning to put a canoe on it if i get one. Thanks for the vid

wonderful, thanks so much.