Best video ever

Hey mate, you sound Australian.. how’d you go about purchasing the 3dwaves Microfreak box? Fairly pricey to buy off reverb..

Are you trying to put people to sleep?

It's possibile to connect sq1 by output midi to a behringer model d and a the same time by CV gate with a separate mini modular system ( ex a eurorack BEHRINGEr brain)???

So when you adjust the speed it changes the pitch? Thanks for the review

I have a digitech stero looper( the big one) still in box. Im thinking of sellingnit any buying this

Love my SQ1 ❤ the pitch dials are gold...

damn why cant there be a quick vid on send and recieve on these keyboard why are you talking so much?

Can’t get this to sequence the Korg Prologue. I’ve matched the channels but still nothing

thanks for wasting 20 minutes of my life

thank you

How can I get the CS to send the clock it's receiving only to the lfo speed

Really appreciate your work. Helpful and detailed info!

Great video, thank you!

whats the note res?

I'm a little confused about the midi change selection, if i want the drums from midi channel 10 than how do i choose that, do you get i mean, do i choose channel 10 for drums on row B and just use the top 8 as the other channels. in essense i could run 1 line of synth sounds and 1 line of midi command from the Sq1 to Gaia using soft thru and still using the Gaia to play over the top. Have you done a series of these super informative clips of tidbit information

This is great, very informative and easy to undrstand. Bought SQ1 for$60 yesterday, hoping to be able bring some seqjuenbces to my gaia,,midi cable coming, mightt hace to start looking at hosts

A quick question or two.. I'm thinking of getting an SQ-1, and possibly a second one eventually, am i correct in thinking if you wanted to use two SQ-1's you could sync their timing by connecting the SYNC "out" from one into the SYNC "in" on the second one?, I would be using Midi, but would want both SQ-1's to be synced together to create two independent 16 step sequences., and would pressing start on the one sending sync start the other one?.. oh and I've sub'd your channel!

Can I have two synths being sequenced with different notes and also start a drum machine?

FUCKING HELL. That was awesome.✊️

Great video bro. Aussie? Illinois? Anyway, had my sq1 for years and never used it with midi. Its funny that i actually am going to buy another one tomorrow. Thats how i found you. 👍👍

I have a Lekato looper which is a good looper and the one I started on. I then went to extremes and got the Boss RC300. If you want to record multiple tracks or perhaps separate loops for verse, chorus, bridge then it’s brilliant. For the most part I only need one track but still found myself using the Boss beast simply because I could turn the loop off with a single click. (I hope my use of the word click doesn’t bring back too many unpleasant memories) Your video has helped me decide that I will get the Rowin. Thank you for your review.

Thank you man, appreciate it

I have the boss 300 one, and it’s great, but it’s like having a second pedal board. I only paid $10 for the twin looper, so I’m sure I can use it. Reverse is fun, even on my digitech xp 300!

I had to update 😅

OMG... this was painfu.

Are you able to record additional loops at normal pitch after altering the speed or switching to reverse? This would be a useful feature if possible. My ehx 16 second delay does this. Edit: unfortunately the answer is no.

how much current needs this bad boy?

New sub here! Really a great video with awesome information and I loved the demos of each pedal. I'm looking to incorporate some pedals (old and new) in my studio and try some different combos for cinematic/pads and drones. In my studio, I like to try all different kinds of gear - vintage, etc.

Perfect...... exactly what i wanted to do with this synth.

its sold for $100 where I live. Is it worth it?

I have a Digitech JamMan Stereo looper that is the bigger version of the same looper you didn't like, and has the same issues you didn't like. It also has a reverse feature; a thing you did like, and I like that too. It does not have a way to adjust the tempo (not really a priority for me) or anything to do with effects. The built-in rhythm machine? Ugh. I never turn the volume up. I could safely pry the volume knob off, cut off the stem, and weld a piece of metal over the hole where the knob was. Now, the clicky pedal: most of the time the sound of tapping the loop/play/stop pedal doesn't bother me, because most of the time I record loops from keyboards or guitar without a microphone, so the looper doesn't capture the click sound. But once in a while, I want to loop something acoustic and use a mic, so I did a simple modification. I cut some thin bits of 1/2" diameter foam pipe insulation to make little pads that go over the stomp buttons and soften the click sound. It took some trial and error to get these bits of insulation thick enough to damp the click, but not so thick that they make the stomp buttons hard to click. Anyway, I'm looking at other loopers again because I made a major mistake: I watched Reggie Watts do live looping, and he's SO GOOD. Reggie uses a looper with multiple channels. It lets him create arrangements by making loops that can be faded in and out, and mixed (live) in different ways. He often only uses his voice to make entire pieces. Of course, Reggie Watts has an amazing voice, and a nice Nord keyboard for backup in case he gets a sore throat or something. Loopers with multiple loop channels are few and expensive, but I know that's what I want from my next looper. Um, and a nice Nord keyboard, and a four-octave vocal range, and great hair. Until then, at least I have my sense of humor.

I've had one of these for a few years and still use it every week. I knew about changing the resolution in the global parameters and today I came across this gem of a document on the korg website which explains the other parameters. When I connect the SQ-1 via SYNC to the volca, monotribe, or electribe, the sequencers do not advance at the same speed. The SQ-1 lets you change the sequencer's step resolution. If the step resolution does not match the device that is connected via SYNC, the sequencers will not play in synchronization. In global parameter setting mode, adjust the position of the SEQUENCER MODE selector to the appropriate step resolution as follows. • “WW” ALTERNATE: quarter note / SYNC X2 • “Z” ORDER: 8th note / SYNC X2 • “<=>“ PARALLEL TURN: 16th note / SYNC X2 • “=>“ PARALLEL ORDER: quarter note / SYNC X1 • “=>“ CV DUTY: 8th note / SYNC X1 • “=>“ CV SLIDE: 16th note / SYNC X1 • CV/DUTY RANDOM: unavailable • RANDOM: unavailable * SYNC X2 = 1 sync clock advances 2 steps / SYNC x1 = 1 sync clock advances 1 step This is the link to the document i.korg.com/uploads/Support/USA_SQ1_FAQ_Tips.pdf Hope that helps

this is cool i have time maker looper it dose this and more

Thanks for clear instructions. Is there a good way to let the reface CP receive only the midi clock, so that delays are synced with for example my loopstation?

Im really considering doing this because i feel like i can mount this better and use a better keyboard/sequencer.

My God just shut up and review the damn pedal

This is the worst looper of all time.

Hello. Thank you very much for this video, you really helped me. I have one question left, how to change the PPQ of the sequencer so that the step is one to one with my other devices?

How much time that this looper give you to run a loop?

I have 5 Digitech JamMan Solos. They're the best in my opinion. One needs to really know how to use them properly. They can loop for 10 minutes as to where most loopers will only record up to one or two minutes. I also like that I can save my loops. 198 of them!

Thanks ! Great how they mentioned that the B channel was set to the next in line of what midi A was set at. This was driving me crazy 😎

Thanks for the video. I can't access the advanced settings. When I follow what you're doing ( holding done the keys and power on ) the LEDS don't stay on. I have no idea what to try next. Thanks in advance

Thanks so much!! Now I also know I CAN set midi channels on the Reface. I want to do a setup of the CP and the yc and also a Novation mininova, which all should be connected via a midi through Box so they´re playable by a masterkeyboard with bigger keys. No Computer. The central Station is a Tascam Model 12. Do you think that´ll work? Even with the possibility to switch between the three between or even in songs?

I keep trying to set my Roland tr-6s up to the sq-1 but the signal the sq-1 receives is clocked…. But wayyy to fast. I’m struggling to figure it out.

Your videos are perfect. You aren't trying to be a comedian, spend an hour saying what you could have in ten minutes, or show your face more than the gear. You have amazing talent and knowledge of synths. Thanks!

This is great. Thank you. Can the CP receive midi from a DAW via usb?

I don't even plan on using MIDI with my SQ-1 but was curious about the settings. Thanks for a great tutorial, hope you're doing great. Now to go watch your SQ-1 jam video. (:

Brilliantly done!

Is this just Modal Skulpt and nothing else? No external effects etc?