Пікірлер
@texastom01 11 сағат бұрын
Interesting to see how he tied all that stuff into his harness and battery. Start with an adequate battery, cuz your headlights are grabbing all the juice....not that hard to see that.
@shift_points 11 сағат бұрын
@@texastom01 wasn't the power of the headlights actually losing ground to the whole circuit! Check out today's video it explains all the tie in of the panel and tomorrow I'll explain what I found as the problem!
@sydrider6023 11 сағат бұрын
Nice job!
@shift_points 11 сағат бұрын
@@sydrider6023 I appreciate that! I'm happy with it!
@sydrider6023 11 сағат бұрын
@@shift_points most of my 63 electrical is still original. I replaced the original turn signal cancel switch last winter. It was an original Ford switch… Wiring is super important and needs to be made to last. Corrosion is always a concern. You did the right thing with your upgrade. Well done!
@shift_points 11 сағат бұрын
@@sydrider6023 all the wiring in this is stock too! I don't like messing with old wiring much so I try to avoid tying into as little as possible lol thank you!
@garyjensen4107 15 сағат бұрын
Awesome
@shift_points 14 сағат бұрын
@@garyjensen4107 made a huge difference!!
@acrock21 20 сағат бұрын
6,000 dollars?!
@shift_points 20 сағат бұрын
@@acrock21 and you see why I haven't got it 😂
@acrock21 19 сағат бұрын
@@shift_points haha
@xNachoPandaXx Күн бұрын
Damn thats a bummer looks great tho 💪🏽
@shift_points Күн бұрын
@@xNachoPandaXx I appreciate it! I think I have it figured out. I'll post an update soon!
@Bennyboysspeedshop Күн бұрын
Always test anything with burnouts. Awesome video
@shift_points Күн бұрын
@@Bennyboysspeedshop I agree completely! Thanks for watching man!!
@user-je6tk7hk6r Күн бұрын
free candy baby
@shift_points Күн бұрын
@@user-je6tk7hk6r 😂😂😂😂😂
@Mxdustbunny 3 күн бұрын
Damn it was at 69 likes. Not changing that.
@shift_points 3 күн бұрын
@@Mxdustbunny I wish you would but I also respect the decision 😂
@CadillacUnautorthorizedservice 3 күн бұрын
Word bro
@shift_points 3 күн бұрын
@@CadillacUnautorthorizedservice suddenly got that super hearing 😂
@bramporter8852 3 күн бұрын
Did anyone else hear the buck? "Wolverines!"
@sydrider6023 4 күн бұрын
The condition of the original speaker is above what I had expected. I didn’t get to mine yet. It took you like 1 minute to get the radio out?
@shift_points 4 күн бұрын
It has really held up! The cone was super fragile though. I'd say about 10 minutes because I was having to figure it out as I went. But pull the speaker, remove the metal brace on the back, and then pull/unscrew the knobs and it is really to pull out.
@sydrider6023 4 күн бұрын
@@shift_points I will watch your vid again to make sure I understand it all. Mine will get restored but will remain original at least for the short term….
@shift_points 4 күн бұрын
@@sydrider6023 nothing wrong with that at all!
@larrymelroy5687 4 күн бұрын
Good information the part is still like 90 bucks so that's not half unless you got a used one . Either way still good information
@shift_points 4 күн бұрын
Price has gone up since I did this! Lol but still it's $40 less than the other valve option. Thank you. Hope you subscribe and follow!
@foxxfury145 4 күн бұрын
The little sub won't do anything
@shift_points 4 күн бұрын
@@foxxfury145 compared to the 1 60 year old dash speaker the car had before. I'll guess it will be better 😂
@sydrider6023 5 күн бұрын
The back end side is suppose to go to a frame bracket where it connects to the rubber line that is going to the diff.
@shift_points 5 күн бұрын
Sorry you are going to have to refresh my memory here! What's this referring to?
@sydrider6023 5 күн бұрын
@@shift_points yes, the rear extremity of the front to rear brake line is suppose to screw into the flex hose that is held in place by a L shape bracket attached to the frame (driver side) just in front of the differential and above it. This bracket is made so the flex line is secured to it and so you can attached the rigid line coming from the engine bay to this flex rubber hose. This hose then is connected to a Y bronze fitting that is secured to the diff tube with a bolt. The Y then can be connected to the driver side wheel and also to the passenger side running a top the differential.
@shift_points 5 күн бұрын
@@sydrider6023 Oh okay understood! That's true for the drum brakes that were on it from the factory. Since the disc brake calipers have to float you have to have a rubber line at each caliper. So I just picked the shortest way to the L brackets I mounted on the frame and ran it that way. So far it has worked super well!
@sydrider6023 5 күн бұрын
@@shift_points yes, I didn’t think about your rear disc brake set-up. You absolutely need flex lines for this. I was able to pull the original steel line from my 63 this evening. I have purchased a stainless steel pre bent line but honestly, I have no idea how I will reposition it like the original with the body on the frame…😣 I saw you have a nice proportioning adjustment device under the brake master. I think this will be my next project since I have the front converted to disc brake.
@shift_points 5 күн бұрын
@@sydrider6023 Yeah! I got this whole kit calipers, rotors, booster, master cylinder and proportioning valve from MBM Brakes in Asheville, NC. It all went together really well. One thing about these cars is they are HUGE but when its time to run lines and everything else everything get super tight lol
@IceTown23 5 күн бұрын
Can you do a more specific video how to connect to sending unit? What lines goes where? I have a big ten and dual tanks and need some help
@shift_points 5 күн бұрын
@@IceTown23 I would love to do that but unfortunately mine already had the plug that was needed to just plug directly back into this valve. So I didn't have to do any of the wiring for the sending units. BUT I do have a diagram for the wires and hoses that I will post over on the community part of our page so you have it!
@IceTown23 5 күн бұрын
@@shift_points ok thank you
@IceTown23 5 күн бұрын
@@shift_points while I have the wire connection but I’m trying to see where the hose go from sending unit. In your video you didn’t show sending unit just connected
@shift_points 5 күн бұрын
@@IceTown23 Yes that's true. I didn't go all the way to the sending unit. Just replaced the rubber hoses that came from the hardlines mounted on the frame to the valve. I took pictures of how it was connected before I took it apart and then just put it all back onto the same lines.
@IceTown23 4 күн бұрын
@@shift_points yes, I trying to figure out the hard lines to the sending unit
@RetrosoundCarAudio 5 күн бұрын
Awesome video! Cant wait till the next episode 😀.
@shift_points 5 күн бұрын
@@RetrosoundCarAudio Thanks so much for getting all this for us! Next week Power Antenna!
@wombatizzle1319 9 күн бұрын
I have a 4 door hardtop fast back. There is no center post.
@shift_points 9 күн бұрын
Hey there! You are saying there is no center post between the windows right?
@Marksrides78 10 күн бұрын
Good install, looks great
@shift_points 10 күн бұрын
We really appreciate that! Got a power antenna coming next then going to wire it all up!
@jewllake 10 күн бұрын
That's a pretty slick kit. I really wanted mine to look original so I had my clean original AM radio converted to AM/FM. I forget how much it cost since I had it done nearly 20 years ago. It's 100 watts and I have the dual voice coil 6x9 in the dash with another dual voice coil 6x9 in the original location in the rear package tray. It also has outputs for aux and an amp if I wanted to hook one up. It does not have blue tooth since that was not really common back then. I'm sure you could get it now.
@shift_points 10 күн бұрын
@@jewllake that's a good way to do it! Anything I have taken off of this car I have kept in case me or anyone else after me wanted to put it back to original! I hope you'll subscribe and see what we are doing with the sub and amplifier from Retrosound coming out later today!
@ShadowRing0219 11 күн бұрын
Nd2 Miata rf
@robertmacpeek424 11 күн бұрын
Genius!!! I always wind up grab each individual tool outta the box anytime i pull one of my holley/QFT's. Definitely checking this out 👍 This is perfect for grabbing just what you need and heading to the track😎
@shift_points 11 күн бұрын
WAF Racing have some of the coolest 3D printed car stuff out there! Tell them Shift Points sent you!
@kasenhaddix7651 11 күн бұрын
Can’t wait to see the results. The galaxy is probably one of my favorite older cars. Such a pretty car. Earned a sub from me. Also, done a few carpet jobs with some professionals and not one of the has shown me the step bit trick so 10/10 tip.
@shift_points 11 күн бұрын
I appreciate it a lot! Should be on KZbin on a couple of weeks! I'm glad it helped out! Thanks for watching and subscribing
@lokopz5512 11 күн бұрын
One hell of a sales pitch feel like I need one 😂🤦♂️
@shift_points 11 күн бұрын
@@lokopz5512 got a lot of stuff to cover in there!
@lumbee1986 11 күн бұрын
I don't have anything with a carb but this makes me want to have one and learn how to operate on it.
@shift_points 11 күн бұрын
@@lumbee1986it is a super cool kit!! Makes working on them so easy!
@ballsdeep420x 11 күн бұрын
You add the stupid square thing to adjust Rochester carbs.
@JosephArata 11 күн бұрын
Carburetors are inefficient complex junk.
@shift_points 11 күн бұрын
@@JosephArata so I guess you don't need this kit then? 😂
@sacclunch209 11 күн бұрын
If carbs are inefficient complex junk, I work with and tune both efi is cool but carbs will always be king in my book whole system can be cleaned and refreshed in a hour or two for less than 100 bucks basicly with this handful of tools in the clip
@RandyG727WGR 11 күн бұрын
Righhttt, that’s why Suzuki is still putting a carburetor on a bike in 2024
@JosephArata 11 күн бұрын
@randygregory4852 a motorcycle carburetor is not the same as a V8 Carburetor with 100 tiny parts that must be functioning correctly for it to properly meter fuel and air, and not die at idle. You've got a pin and a slide with a return spring on a cable and a few jets to worry about, not the same thing. But keep on with your strawman arguments and lack of knowledge.
@JosephArata 11 күн бұрын
@sacclunch209 carbs are obsolete, dirty, and shouldn't be even a consideration, but for small engines. And no, you're not cleaning and making a tiny 100 part V8 carb from the 1950s and 1960s work with just new gaskets. If any of those parts are worn, or the bores they sit in loose, it won't run right.
@user-ji7ko2ts8k 11 күн бұрын
06 Chevy Silverado crew cab 1500 4x4
@shift_points 11 күн бұрын
@@user-ji7ko2ts8k I had a 2003 single cab in high school!
@Snorting-tuna 11 күн бұрын
Volkswagen Polo
@shift_points 11 күн бұрын
@@Snorting-tuna nice little car!!
@enperk4797 12 күн бұрын
V6 Camaro I like this car so much is in sane
@shift_points 12 күн бұрын
I had a buddy that had one too. He loved it.
@Deltareview420 12 күн бұрын
Nothing fancy just a r6 for a daily and I got a s1000 for my race bike 😂
@shift_points 12 күн бұрын
@@Deltareview420 nothing fancy he says 😉😂
@Deltareview420 12 күн бұрын
@shift_points it's not am I missing something
@noprob364 12 күн бұрын
Sounds like time for upgrades 🎉
@shift_points 12 күн бұрын
This old Fairlane may be getting a few little upgrades here soon! 😎
@zacksmith1643 13 күн бұрын
Badass
@shift_points 13 күн бұрын
Simple and easy!
@zacksmith1643 10 күн бұрын
@@shift_points that’s why you got a sub from me 🤌🏿
@shift_points 10 күн бұрын
@@zacksmith1643 awesome! Thank you!
@dirtysteve7866 16 күн бұрын
looks like china junk
@shift_points 16 күн бұрын
I've had extremely good luck with Retrosound for more than 5 years in my C10 truck! That's the reason this car got the same stuff. Thanks for watching!
@quickdraw304racing 16 күн бұрын
Let's paint the Falcon black he says, it will be cool he says, I am a baked potato by 1st round elims!🥵
@shift_points 16 күн бұрын
😂😂😂😂😂 oh no! Those in car temps are crazy!
@MondayMorningRacer 16 күн бұрын
Enjoyed!
@shift_points 16 күн бұрын
Thank you sir! We appreciate you watching!
@ryandavis930 17 күн бұрын
Was smoking hot
@shift_points 17 күн бұрын
I believe it! Glad so many stuck it out!
@danemaddalena9674 19 күн бұрын
Just get a new fender
@shift_points 19 күн бұрын
Needs a new front clip 😂
@danemaddalena9674 18 күн бұрын
What's the whole truck look like
@shift_points 18 күн бұрын
@@danemaddalena9674 we put a new bed on it last year but the front clip is extremely rusty. Drivetrain all good though.
@danemaddalena9674 18 күн бұрын
@@shift_pointsis there a video of that
@shift_points 18 күн бұрын
@@danemaddalena9674 yes sir! It ended up being a couple of parts! I believe I tagged it in this video.
@user-hf4mb2bj8b 19 күн бұрын
What's cool is zip ties can be stitches if used correctly
@shift_points 19 күн бұрын
I've seen it in the drift world lol
@chevroletsilverado288 19 күн бұрын
Twinsies
@shift_points 19 күн бұрын
Got to love it 😂😂
@user-hf4mb2bj8b 19 күн бұрын
Yeah zip ties and gray tape woohoo man you can fix almost anything with those two
@shift_points 19 күн бұрын
That's exactly right! 😂
@afwoods 21 күн бұрын
Is that an R code car? I think it might have been a good idea to just paint certain spots where needed and leave that original paint alone as much as possible.
@shift_points 21 күн бұрын
No it's not an R code car just a 390. This car has been in the family since it was new so it is not going anywhere. Lol
@JasonChamberlin-oo2so 21 күн бұрын
Why are you using different plugs?
@shift_points 21 күн бұрын
They are all the same part number. Not sure why 2 are a different color to be honest.
@jeffjinai4676 22 күн бұрын
Tons of everything I always go for the one every time. Yep I do it to
@shift_points 22 күн бұрын
Just some good comfort lol
@carlsny1023 26 күн бұрын
just removed my valve on my 1980 c-10 and it only has one terminal, not the multi pin connection on yours and on the replacement part.. anybody know anything about this one?
@shift_points 26 күн бұрын
I saw something about this. I believe I saw there is a pigtail you can buy to replace the connection you have with the multi pin. I think it was a design change that was made in later years.
@carlsny1023 26 күн бұрын
@shift_points thanks so much for the quick response! also, did you drain your tanks before removing? I didn't, i just pinched off the lines as i removed them but then when i removed the vice grip, no gas came out of my lines from either tank.. shouldnt it have flowed out?
@shift_points 26 күн бұрын
@@carlsny1023 no I didn't drain mine. Since the fuel pump isn't pumping it should just drain the lines.
@user-je6tk7hk6r 29 күн бұрын
❤❤❤❤
@robertmccully2792 Ай бұрын
Your not telling us where your getting these parts from? Your so lucky to have a dad thats a car guy.
@shift_points Ай бұрын
Sorry about that! The disc brake kit came from MBM Brakes in Asheville, NC. I think I mentioned it in an earlier video when we worked on the front! Just let me know anything else I missed that you are interested in!
@shift_points Ай бұрын
Agreed! He's probably getting tired of me becoming more and more a car guy! 😂😂 I cause a lot of work! Lol
@user-me9vr4ed5x Ай бұрын
Whenever I open a tool drawer, the tool I needed is anywhere but there
@shift_points Ай бұрын
Haha that's fair too 😂
@johnk3930 Ай бұрын
What’s next?
@johnk3930 Ай бұрын
Let’s go
@johnk3930 Ай бұрын
Awesome