Makes me wish I had a nice wood shop like you to make one of these. Great job building one of those tardis full scale, I saw one earlier with a secret room past the doors concealed in the back panel as it just looked like a little shed inside but once he turned the key, opens the doors and a secret room with cool tech and kinda a man cave in it.
@KSKS37Ай бұрын
That sounds really cool
@lettoservicedaccommodation77642 ай бұрын
What would is that? Just scaffold boards?
@KSKS372 ай бұрын
Yep 👍
@lettoservicedaccommodation77642 ай бұрын
@@KSKS37 thank you, where can I flnd the measurements of what you used? Then I can work backwards to suit mine cheers
@KSKS372 ай бұрын
I made it up as I went along with whatever I had available, don’t worry about measuring stuff, if it looks right, it is right 👍
@lettoservicedaccommodation77642 ай бұрын
@@KSKS37 ok cool, I’ll just replaying the vid then!
@Lucster8able4 ай бұрын
Hey there! I want to do this project, I know its been 4 years, I think I got it all figured, I'm wondering how you connected the hub on the back wheels to the axle. Looks like you threaded something through there. Mind giving me a pointer or two??
@KrazeeKraftZ4 ай бұрын
Great job and good idea to get the dimensions from the small one.
@ep80295 ай бұрын
Now all you need is to build a Dalek.
@nigelrogers24746 ай бұрын
What are the dimensions?
@KSKS376 ай бұрын
I made them up on the day and I don’t have access to it anymore. The sides are probably 1200mm wide, no idea on the height. 👍
@berserkerusmc76136 ай бұрын
Brilliant
@KSKS376 ай бұрын
Cheers bud 👍
@cag92847 ай бұрын
Nice, the only thing is the 4 posts are a little thin, but all in all great 👍🏻
@abyss-qf5zo7 ай бұрын
Well cool build but tardises are grown
@user-ey9jb7hf4f7 ай бұрын
I like it and I was just wondering how many tries with the cloth. you read my mind
@jccasas46968 ай бұрын
Pedicabs are so expensive. I would love to do a DIY one. Would be great if you could do this same video with a standard tricycle. I need mine to be not too wide like less than 3 feet. Also it would be cool to see a pedicab made from shopping carts.
@PID19768 ай бұрын
How do you make it bigger on the inside???
@YakobMatiwos-mk4rf9 ай бұрын
You're video low camera qualities
@KSKS379 ай бұрын
Your right
@andre.l.457410 ай бұрын
That's cool, and it even works😅
@fodrocksuk.forestofdeanroc568610 ай бұрын
Really amazing well done
@coltonguffey943411 ай бұрын
Fantastic! Found your channel through this video. I searched it out as I’m wanting to make a pub sign style sign for my student’s club at school. Shocked you don’t have more subs. Keep up the great work!
@joshcoyle380411 ай бұрын
How did you make the disappearing on the tardis
@Curious_Skeptic Жыл бұрын
Omg, should have done backlit interior photography to get the full effect
@KeiteiVentures Жыл бұрын
This is great 👍 I'm about to do something similar. Thank you for sharing, top video!
@teleroel Жыл бұрын
Love the 'FREE for use of SELFIES' on the door!
@jakeetter2822 Жыл бұрын
I really think bicycle companies really should make rickshaws, both bicycle and human pulled.
@Thecampbells0622-pm7bv Жыл бұрын
What was your feeds and speeds do you remember?
@verstappen9937 Жыл бұрын
Shame his tattoo artist wasn’t this meticulous
@roygregory8334 Жыл бұрын
More cheap junk. Same as Aldi's.
@cyberwomble7524 Жыл бұрын
That little squeak of "I shot myself" made me laugh! Brilliant work, especially as you went for the more difficult "white on black" text as opposed to the "black on white" for the Police Box sign, and the pyramid top instead of the flat one.
@RedcoatsReturn Жыл бұрын
Nice job! 😲😊👏👏👏👏👏👏👏👏👏👍👍
@jahmalebanton6641 Жыл бұрын
Parkside tools are not good
@jahmalebanton6641 Жыл бұрын
total tools are the best tools check it out
@CapN3Cook Жыл бұрын
now just purposely creak those hinges and rust them for that creak effect
@SaulSalt Жыл бұрын
Do you have a link to the type of wax you used? I really like the color for picture frames.
@KSKS37 Жыл бұрын
It’s teak briwax 👍
@kirstinebrrup9656 Жыл бұрын
Wow
@Countryboy246 Жыл бұрын
Nice work sir love the detail to work well done
@paulfinn3067 Жыл бұрын
3 x 3, some places in Ireland have never heard of this cut of lumber. confused heads. i had to get 4x3 & cut it. almost finished.
@anthonymiller6315 Жыл бұрын
Use a bigger cross pipe on top and maybe a little force air , a small fan
@jeraldine84502 жыл бұрын
What’s the name of the machine
@KSKS372 жыл бұрын
Atomstack laser
@muhiburmaruf58152 жыл бұрын
Hello mate I just watched your video its so amazing are you still making them I love to learn and have one
@KSKS372 жыл бұрын
I only made the one for an event years ago, I just made it up as I went along. Make one, it’s easy and cheap
@muhiburmaruf58152 жыл бұрын
@@KSKS37 is it possible will be able to tell me what i need and stuff
@Dollapfin2 жыл бұрын
It’s way too small. Triple the combustion area and double the riser height and it’ll pull the flame the whole way up and out the sides and it would work.
@keithatkinson76492 жыл бұрын
I bought a cut30 recently. I'm a novice just starting a bit of hobby metalwork. The first cuts were ragged and needed a few passes. I drew the head down a straight edge each time. There was a lot of spatter either side of the cut. Perhaps I need to take the spacer on the head off or maybe the air pressure isn't right
@KSKS372 жыл бұрын
I’ve found that going slower than I initially think I should go works well
@keithatkinson76492 жыл бұрын
@@KSKS37 I've seen a few folks cutting without the spacer /guard on the nozzle and the electrode is in contact with the metal... Some say this is not good, I'm not sure what to believe
@KSKS372 жыл бұрын
They say it’s not good because the tip will wear out quicker over time. If you only use it once a month then it’s not gonna make much of a difference
@whobackwhen2 жыл бұрын
Wow! That's a stunning TARDIS and a really good build video. Bravo!!
@KSKS372 жыл бұрын
Thank you👍
@richardbaron29482 жыл бұрын
Serious skills! Love it.
@richardbunt22782 жыл бұрын
Hey dude that a cool make over. How about a mark 2. By the way you left the key 🗝 out the lock
@lauraleecreations32172 жыл бұрын
💙🤍🖤💙🤍🖤💙🤍🖤🌌🌠💙🤍🖤🌌🌠❤️❤️❤️
@oguzozturk68552 жыл бұрын
¿ could you please write dimensions ?
@KSKS372 жыл бұрын
I don’t know them, I made it up as I went along and don’t have access to it anymore
@wisemysticaltree45502 жыл бұрын
"A wibbly wobbly timey wimey of... stuff. Well, I can understand you. Well im from the past and well yes this is a recording but i know what your gong to say." -David tennant
@ianwright4902 жыл бұрын
It looks good, but pine for a worktop???? And a single screw taking all the load in shear on the joints doesnt look very robust despite the chunky sections. I'm guessing the budget wasn't so much on this job.
@KSKS372 жыл бұрын
It’s not real, it’s retail display stuff 👍
@Problembeing2 жыл бұрын
I'm pretty sure this is how they're made on Gallifrey, using authentic, traditional Gallifreyan transcendental engineering.
@Stuhuge852 жыл бұрын
Unreal for the money
@mnbv9902 жыл бұрын
Great job, and hilarious too.
@HammerBlow5002 жыл бұрын
Brilliant video! I have to make something similar for a customer and this will be a huge help