How to install Braiins OS on a Antminer S9 - SD card

[@CatsCuriosity]

Thanks for your video. I changed jumper, put SD card with image acording instructions, but my S9 dont boot ! Any idea? Regards

[@jakubprogramming29]

Very helpful for first timers. Thanks for sharing!

[@ealinarestecnologiaca817]

Excelente trabajo, desde Carabobo, Venezuela...

[@exidos18]

if i dont want to flash the firmware i have to buy one sd card for every single miner and run it from sd card?

[@canalfixe]

Yes

[@ShagMother]

0:40 how do i configure different ips for my mac/physical address ? i have multiple miners running on the same mac/physical address. thank you for your help :)

[@canalfixe]

I don’t know mate, please go to the telegram group and ask there: t.me/BraiinsOS Cheers

[@dmitrypolpudenko8669]

Does it have to be root/root login/pwd preset at the miner? My S9 didn't start from SD card, so I'm guessing now what the cause might be.

[@morgansemack]

hey I just bought an used S9 off ebay for $175 incl psu @13.5/1365w. seems like a high wattage even for an old S9 is it possible to lower the wattage with bOS ?

[@canalfixe]

Yes, it’s possible

[@morgansemack]

@@canalfixe I've unlocked/flashed many phones and dual boot my computers so I have experience but any chance to brick the boards? I'm wondering if Antminer latest firmware isn't the safest bet or if I can at least always flash them back. have you ever bricked or burnt up a board overclocking or anything?

[@canalfixe]

I’m not an expert but I have flash all my Antminers with bOS and everything was done without any problems. You can flash back to original if you don’t like bOS

[@morgansemack]

@@canalfixe awesome dude thanks for the quick response. hope you're making a killing right now :)

[@davidwattierfilsdegabriel2933]

VERY NICE SYSTEM 1000% GOOD WORK THK

[@SpaxTron]

Song?

[@brandonedwards7166]

It doesn't work for me. I just get a red error light.

[@morfeuss85]

So the sd card stays in and the pin changed also stays same?

[@maximmaixon8904]

you need to ssh to the minier after its boot up and put the comend miner nand_install and then you can put all to normal

[@morfeuss85]

@@maximmaixon8904 Sorry, i did not understand. I meant in case i used the Sd disk, does it / should it stay in the miner?

[@maximmaixon8904]

@@morfeuss85 it don't do any problem if it saty

[@dmitrypolpudenko8669]

@@maximmaixon8904 do I need to set jumpers back to previous position after the OS installation?

[@maximmaixon8904]

@@dmitrypolpudenko8669 ие авизателно

[@mtahir038]

Thanks for the video, do you know the difference in the new firmware update? im still on the old one

[@canalfixe]

Don’t know mate, i have only install this

[@TylorBang]

@@canalfixe song?

[@canalfixe]

Can You Feel Me de Wontolla Feat. Nathan Brumley . www.shazam.com/track/279950949/can-you-feel-me

[@zhearace2028]

can you make a video to se it back to defulte firmware

[@canalfixe]

Already done mate, Migrating from Braiins OS to factory firmware kzbin.info/www/bejne/nYGnc2WHitGFr68

[@vanderheijden3927]

sd.img is the image(latest version) you downloaded from feeds.braiins-os.org?

[@canalfixe]

Yes :) feeds.braiins-os.org/

[@vanderheijden3927]

@@canalfixe thnx for the answer man! And is it btw necessary to change the MAC in uEnv.txt?

[@canalfixe]

Yes, u need to change the MAC

[@canalfixe]

Hi, that’s the only way, where you stuck at?

[@canalfixe]

Hoo I see, You should try make the steps on the video, if you are stuck on something you can reach to me here, the steps on the video are step by step, should be easy. Try it man

[@davidwattierfilsdegabriel2933]

The Braiins OS not fonctionnary is NiceHash Why ???

[@g-jm]

Is there support for L3+ ?

[@nicholaslibby1515]

Make sure you use the 8G SD!

[@nicholaslibby1515]

Might be a little late

[@ShagMother]

my config always goes back to default pool url and default clocks after reboot. how do i fix this issue ? great video btw :)

[@canalfixe]

Strange... maybe the file permissions are wrong. Try enter via ssh and change the file permissions to 755 or 777 on your pool file ( don’t know the file name now, i’m not on my miner right now.) Or you can try reinstall once again the fw. Try ask on telegram group for help: t.me/BraiinsOS

[@ShagMother]

@@canalfixe ty will do as advised :)

[@ShagMother]

@@canalfixe oh and just one more thing ... what is the fee they charge for running this os ?

[@canalfixe]

Nothing, that’s a open source OS, if you like you can donate something to the devs.

[@ShagMother]

@@canalfixe 0:40 how do i configure different ips for my mac/physical address ? i have multiple miners running on the same mac/physical address. sorry for the noob questions :(

[@nayamoya]

I wonder, what is the benefit of this custom fw?

[@canalfixe]

Open source

[@jurgenschneider8512]

rufus link dead

[@regenbiologen]

can I use it on a s9i?

[@previ26]

Yes!

[@digitalevidenceexpert7964]

I can't make heads or tails from this video because some of the menus are in a foreign language. Is it possible to make a version in English to make things understandable for Americans? Thanks in advance.

[@pilsnerurquelltt222]

And how uninstall pls?

[@canalfixe]

Take the MicroSD card out and put the jumper back on original position

[@pilsnerurquelltt222]

@@canalfixe And if i no instal with SD but with web browser?

[@canalfixe]

Don’t know, I only have installed on MicroSD

[@pilsnerurquelltt222]

@@canalfixe ok. Thx :)

[@joushep]

hi how to miner hash rate and ower clock

[@canalfixe]

Services->CGMiner, overclock is dangerous, u can brick your miner. U should know what are u doing

[@ArjunK-yz4vx]

Thanks!